Equium L40-156 - Vista to XP

I made my own copy WinXP, I used nLite to put sata drivers, I made boot cd with new XP, when I restarted my laptop I can see DOS screen.
Do you know what command I have to use to start XP instalation?
Thanks

The nLite program creates a simply, bootable XP CD!
You dont need any commands to start the OS installation. You have to boot from the new XP CD and the OS setup should start.
If this not possible then I assume you did something wrong and the new created XP CD is not bootable.
In such case I would recommend to create new XP CD and to implement the Intel Storage Manger again!
Best regards

Similar Messages

  • Is it possible to install windows XP on Equium L40-156

    Hi, I want to install windows XP on my laptop. Is it possible to do it? and where I can get drivers?

    Hi
    Of course its possible to install the XP on this notebook.
    I checked the official Toshiba website and found out that the Equium L40-156 belongs to the PSL49 series!
    This series number is important to get compatible Xp drivers from the Toshiba European driver page.
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    On this page you can find an XP driver package for you notebook!
    Very important is the BIOS update. If you want to use the XP on this Vista notebook you have to update the BIOS to the XP version!!!
    Without the right BIOS some Toshiba features like FN keys could not work!!!
    Best regards

  • Equium L40-156: Need spare battery PA3615u-1brm

    Can you help me?
    Do you know if i can get a spare battery for equium l40 156 battery model no pa3615u-1brm?
    cheers

    Google simply for this part number and you will get more than enough hits and different offers.
    Or you will contact the ASP in your country and the guys will order it from the Toshiba Europe directly.

  • Equium L40-156 RAm

    any body has an answer :
    is 200-Pin PC2100 (266MHz) DDR SODIMM  RAM compatible with Equium L40-156 RAm
    thanks.

    Nope.  That system requires DDR2 RAM (667 MHz)  You need THIS memory, not just the type, but the brand.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Does Equium L40-156 supports internal mic

    Hi.
    We have a laptop Equium L40-156.
    We have problem with a microphon!
    We can hear people who are calling us (by Skype) but they can't hear us.
    Is it possible that we don't have a microphon inside a laptop?
    Or is it something wrong with setting?Thak you

    Did you check the microphone device in the Skype options?!
    What device was chosen?
    In my opinion this notebook was not equipped with the internal mic. You will need an external one!

  • Equium L40-156 boot up problem

    I have an Equium L40-156. When I press the power button the power light comes on but there appears to be no hard disk activity. If I manually switch it off by pressing the power button for several seconds, leave it for a couple of seconds and press the power button again it starts normally.
    Any ideas please?

    Hi mate,
    Did you recently updated your BIOS, installed some more RAM/another HDD or some software?? Maybe some driver update??
    Since when does the error appear? And do you have still warranty on it?
    So, if yes, then bring your machine to an authorized service partner and let them check your machine. Would be the best...
    Greetings

  • Re: Equium L40-156 - How can I turn on wireless?

    Please help!
    Toshiba Equium lL40-156 wireless swich or FN+F8 wont turn on wireless function.
    Never used it before but the light used to come on.

    Hello
    If you want to enable WLAN card you must move WLAN switch to position ON and then use FN+F8 key combination to enable WLAN card.
    I don't know what do you mean with your last posting but if you install Vista again the WLAN card will be installed properly and must be shown in device manager.
    When finished do what I wrote and I am pretty sure the WLAN card will be enabled properly.
    Good luck!

  • Equium L40-156 - Indicator WLAN sometimes not work

    Hello peoples - has anyone any idea wha this is bout?
    I cant seem to find a similar problem anywhere. The indicator light for the wireless connection will sometimes not work - as a result i have to manually go into network connection and turn on wireless cap. - this will not turn the light on but does allow me to access the internet.
    This happens for a few weeks and then it all rights itself for a few weeks,
    Then it happens again.

    Hi
    Do you mean this issue happens sometimes but in most cases you can enable the WLan properly?
    First of all to enable the WLan you have to move the WLan antenna switch to ON (be sure that it has been switched properly to the right) and you have I use the FN+F8 key combination.
    Usually this enables the WLan.
    Im not sure why the WLan antenna switch does not work sometimes maybe its a hardware issue; for example loose connection or the switch was not moved properly who knows
    Maybe it would be a good idea to ask an technician for a WLan switch check...

  • Equium L40-17M Vista volume problem

    I recently had my laptop restored to factory settings due to a problem and since having it back I can no longer use the 'fn' button to control the volume and have to change it manually using the icon on the taskbar. Does anybody know how I can get this working again?

    I agree with Akuma.
    This function is controlled with small tool integrated in VAP.
    Remove VAP from the system, restart your notebook and install VAP from Toshiba download page.
    I really hope it will work again.

  • Replacement charger for Equium L40-156

    Hi,
    Can anyone tell me where I can get a replacement charger for this model please?
    Thanks

    I believe you can buy them from Authorized Service Centers
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  • Equium L40 - upgrade questions

    Hi, I have an Equium L40-156 PSL49E running Vista Home Premium.
    I have 3 questions: (due mainly to a desire to upgrade things)
    1. What is the max hard drive capacity supported?
    2. What is the max memory configuration suppored?
    3. What are the benefits of upgrading to BIOS 2.00-WIN?
    Thanks in advance for any assistance, regards, Chris.

    Hello
    I will try to help you with your questions:
    Friend of mine has Satellite L40 and I can confirm that you can upgrade it with 200 GB SATA HDD. Service told him it is max capacity according the Toshiba.
    Is this enough for you?
    RAM can be upgraded up to 2 GB. It is the max supported value.
    About BIOS updates there are no specific information. If your notebook runs well you must not update it at all.

  • Equium L40 - Vista refuses to boot after product recovery installation

    Hi,
    I have had to carry out a product recovery uses the supplied restore disk on an Equium L40 (PLS41) laptop. The recovery procedure does its job to the end, reformats and copies all the files then restarts. Now the problem starts....
    The pc gets past the BIOS splash screen then it goes completely black with only a flashing underscore cursor in the top corner of the screen. No HDD activity or CD-rom activity.
    I have done the recovery about ten times now. All with the same result. I have tried the repair procedure using a Vista boot CD and I have also tried it using another disk that came with the computer, Vista anytime upgrade. There are no faults found, it see's the hard drive and shows that the vista files are on it, also sees the winRE partition.
    I have even tired installing fresh from the anytime disk. This also reformats the drive, copies and unpacks all the necessary files, starts to install updates off the disk and then says it needs to reboot. It reboots and goes straight to the black screen with the flashing underscore cursor. This happens whether I press the "hit any key to start from CD-rom" or leave it to boot from the HDD.
    I have been trying to fix this for two days now including endless hours of forum searching, my friend, whom the pc belongs to is getting quite irate as am I. I need help. Does anyone know how to fix it?

    Hi
    According to your message I believe that the HDD is faulty.
    I think there is a faulty master boot record (MBR) on the HDD and therefore the notebook refuses to start.
    One question; did you try to set the BIOS to the default settings? If not try this.
    If it doesnt help and the notebook will still not boot up then you should ask the ASP for the check.
    In my opinion its a HDD issue and possibly the HDD must be replaced!
    Greetings

  • Equium L40-10Z - Need WXP driver for sound an SM bus controller

    Was vista, lost system, reformatted and installed XP as no recovery discs for Vista. Now no sound and says SM bus controller unplugged.
    Any help please or where can get proper recovery discs (UK). Thank you

    Hey,
    I think sound doesnt work because you have no drivers installed therefore and also for SM bus controller you have to download the driver on Toshiba page.
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    *Archive* > Equium (Notebooks) > Equium L Series > Equium L40 > PSL41E
    But you will see that there are no XP drivers available but what you can do is using the PSL49E model number that supports Windows XP. Usually there is no big difference between these models and the drivers should work on your system too.
    For SM bus controller you have to install the chipset driver and for sound card the sound driver but latter requires Service Pack 3.

  • Equium L40-10X: Need details about memory

    I am thinking of upgrading the RAM memory on the above, but can't find the model or specification on the UK website (other members of the Equium family range are on the "Laptops" section of the webpage, but my model frustratingly is not!) -
    I am particularly interested as I want to get the correct type of memory (original or generic) - can users help me on this?.
    My main reason for increasing the RAM memory is that the laptop seems disappointingly slow with the standard 1GB ram which i belive is fitted as 2 x 512mb -
    If any users have any other tips for speeding the laptop up, please let me know.
    Incidentally, powering up takes about 50-60 seconds and shutdwon 40-50 seconds, is this normal.
    The laptop is currently as per facory fit specification.

    The ram required is pc2 5300 200pin sodimm.
    You can purchase this from dabs.com for appx £30 for the 2gb kit ( 2 x 1gb modules) .
    I also did this and it makes the equium L40 run better. This along with vista sp1 and the atheros wifi driver version 7.6.0.70 from this site made my notebook a much better pc.
    You can use the crucial memory selector on the dabs site to go exactly to this ram then place your order.
    Good luck.

  • Equium L40-10X - Can't install Windows

    Hi all,
    First actual post but been around on and off for a while. I hope somebody here can help!
    I have a Toshiba Equium L40-10x laptop with a strange problem. It came to me second user with the problem already so I don't know any history other than what I have tried. When you boot the machine it comes up with a TRAP 00000006 exception error and stops. The hard drive has been low level formatted, formatted and partitioned and has nothing on it. The memory has been replaced and confirmed working. When you try and use the recovery cd (F12 on startup) it goes to the select boot option menu, I select CD player and it makes a few noises and then the error appears. I have also tried a WIN XP and WIN Vista CD with the same effect.
    Googling the problem seems to suggest NTLDR problems or memory but drive has nothing on it and memory has been tested and confirmed fine.
    Other possibilities are CD drive or BIOS. Bios version is at 2.10 and I know that BIOS available is 2.30 but unable at the moment to work out a way to upgrade the bios. I do have a USB Floppy drive available.
    So, thats the problem, any thoughts?
    Thanks
    Message was edited by: acprc

    Have you access to the HDD using floppy start disc?
    Connect the HDD to other notebook, create two partitions, copy I368 folder on second partition. With floppy disc try to access this folder and start WXP installation using winnt32.exe.
    Check advanced search option on this forum and you will find many threads with good description how to do this.
    Play a little bit with it. ;)
    Is the optical disc drive working properly?

Maybe you are looking for

  • Printing On Client Printer

    I have number of records in database. If User clicks on PRINT button each record should be printed(ON CLIENT PRINTER) on a separate sheet. PROBLEM: My apllication is abl

  • 恢复报错ORA-01139

    恢复报错ORA-01139 从oracle 10g RAC (操作系统Enterprise Linux Enterprise Linux AS release 4 64bit),数据库版本10.2.0.4环境中将数据备份恢复到相同环境的异机. 向各位大牛请教! 在做完不完全恢复时. recover database是正常的 RMAN> sql'alter database open resetlogs'; sql statement: alter database open resetlogs

  • Jheadstart 10.1.3.1 multi-select lov

    Hi friends; I use jheadstart 10.1.3.1 with jdeveloper 10.1.3.1 production version. I have a problem about lovs "allow multiple selection in lov" checkbox..It doesnt works.I want to select multiple rows in lov and copy values to my tables return value

  • Viewing PSD's and Jpegs in Lightroom

    When I open Lightroom and use the Loupe toview the files in a directory, it does not show anything other than NEF files. Why ? I currently use Bridge and ACR to edit and process my files, but want to move across to using Lightroom, but I cant see hal

  • What do I need to go wireless?

    I'm about to buy a new iMac and, as I will occasionally need to move it to another room for "digitising" my LP collection, I don't want any wires other than the mains lead. Because I've had problems with my USB modem, I've also been advised to invest