Equium L40 (PSL49E) - Is the BIOS update compatible?

Simple question:
I have a Equium L40 PSL49E laptop with Vista. There is a BIOS update available - but only for models with Modelnumber PSL48x, PSL49x, PSL4Bx or PSL4Cx.
So, my question is: Does that include my model?
Is PSL49E = PSL49x?
It would also be a bonus if someone could explain, which function exactly these updates have? And if there is anything I should be aware of in that context?

Yes, the update is compatible with your notebook. I have also checked the Toshiba website for the PSL49E and I can see this BIOS update.
PSL49x means that this update is compatible with all models that start with PSL49

Similar Messages

  • What's new in the BIOS Update v2.00 for Satellite L505-144

    What's new in the BIOS Update v2.00 for Satellite l505-144
    Thanks

    Hi mate
    As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
    But I found some details on Toshiba US page.
    It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
    Greets

  • New NF980-G65 with an AMD X6 1090T and the BIOS Update Utility Crashes?

    Last week I received my new NF980-G65 board and with it an AMD Phenom II X6 1090T (Thuban 3.2GHz Socket AM3).  After installing the board and starting it up for the first time I noticed that it reports BIOS version 1.1 and CPU unknown.  Next I downloaded the BIOS update to version 1.3 from msi, made a boot USB stick and powered up again.  System will not boot from USB.  I tried now over 20 different sticks from 256MB to 64GB and none of them worked!
    Went back to my old system and ripped its floppy drive out to install it in the new computer.  Had to go to RadioShack since I have not touched a floppy in over 10 years, but they had some on clearance.  Made me a boot disk, put the new BIOS and install utility on it, booted the system with the floppy, started the BIOS update utility and watched it crash.  When I start it by itself it gives me three screens of options and commands, but as soon as I try to use one of the commands or update the BIOS it keeps crashing.
    What do I have to do to get the BIOS on the NF980-G65 updated so it will run with my AMD X6 1090T processor?
    Thank you in advance for ANY help...
    Tyler

    Quote
    I am sorry, but I need to work with this thing since I make a living writing code, I do not play with it!  This thing and the support I am getting for it are not worth my time or money!
    What thing are you talking about?  You are experiencing the a certain symptom for which you do not know the cause.  For some strange reason and without any in-depth tests you seem to assume that the board must be the problem (ignoring all other components (for example your factory overclocked memory modules).
    Quote
    the support I am getting for it are not worth my time or money!
    What support have you tried to get that actually has to do anything with money?  Please note that this is not MSI Technical Support but a User-to-User forum, run by users (just like you) that do not get paid for donating their private time to try to help others.  Whatever your level of frustration is in regards to the money spent for your components, please do not use it to insult anyone here in this forum.
    Quote
    The result remains the same, the update utility keeps crashing...
    Are still using the same floppy drive with the same floppy disk in it?
    What is your current BIOS-Version?
    Quote
    BIOS update utility
    What version? What is the exact file name of that utility?
    Quote
    ade me a boot disk
    How/Based on what DOS Version?

  • How do I roll back the BIOS update on Satellite U400-157?

    I recently updated a Tempro alert for BIOS update for the note book. I now notice that the screen blanks out a few times at PC start up. It was't there before. How do I roll back the BIOS update to an earlier one.
    I don't get to see the BIOS update screen else where other that the time that I did the BIOS update.

    Hi
    To be honest I dont understand exactly what is your problem.
    You said: . I now notice that the screen blanks out a few times at PC start up.
    What does this mean exactly? Is your display black until Windows has booted up?
    To be honest, I dont think that BIOS update would be the reason for that go to BIOS (press F2) and set the BIOS to default settings (F9) and save the changes (F10).
    If you want to get back the earlier BIOS version, then you will need to flash the BIOS ROM module using an DOS based BIOS version. On the Toshiba European driver page you can find only the win-based versions

  • Why doesn't FF make the latest Update compatible with a Power PC G4?

    I've got a Power PC G4 Mac, which apparently doesn't meet the System Requirements for the latest Update of Firefox: why not? In this Economy, I'm sure there are a lot of people like me still running Power PC's, yet now I can't even "suggest" to FF that they include us in the Update, because I "don't have the latest version"! I run my whole Office from my Mac, so it's still pretty darn good. What's with the disrespect?

    Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    *http://www.mozilla.org/firefox/10.0/system-requirements/
    For an unofficial Firefox 10 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    *http://www.floodgap.com/software/tenfourfox/
    *http://www.macupdate.com/app/mac/37761/tenfourfox
    *http://code.google.com/p/tenfourfox/wiki/ReleaseNotes100
    *http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    *http://code.google.com/p/tenfourfox/wiki/AAATheFAQ
    Firefox 3.6.26 has been released, so you can update to that version.<br />
    Latest Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • X100e problems with the BIOS update

    Hello, this is my first message and my english is not so good.
    I have a problem on my X100e to make a BIOS update.
    I download the newest update from Lenovo and burn a CD.
    At next i boot from this CD with the X100e and the update starts.
    But after a few second comes the message the file is damage.
    So i try this with different update versions, but it is still the same result.
    My BIOS version now is 1.04
    What is my mistake?
    Best wishes
    deti330

    Thanks for your quick response.
    Quote
    Originally posted by wonkanoby
    is cmos jumper on keep and whats vbat showing in pc health
    Should`nt the jumper be on keep by default?
    vbat(is that the same as battery in the pc health menuP): 2.96
    Dacourt

  • At the BIOS updating the HP Pavilion zd7000 laptop hanged

    At the HP Pavilion zd7000 laptop BIOS updating from a site HP.com (the file sp33465.exe, OC Windows XP) the laptop hanged and to a BIOS it was not established. Now at inclusion all bulbs burn, but the laptop doesn't submit life signs, fans,
    NDD don't work. The BIOS.bak file remained, but with USB-Flash it is impossible to establish. At USB-Flash connection it
    3 times blink and is disconnected. Prompt how to return BIOS.

    Thanks for the answer. On the bottom cover there is a bar code and number - DP080AVR MFQ# 2CB41216S4 Made in Taiwan.
    Any error messages on the screen wasn't and isn't present. Updating hanged approximately for 40 % -
    6 dark blue segments. After laptop switching off, approximately in 1 hour, it doesn't join any more, and at all doesn't submit
    any signs of work. All light-emitting diodes on the top panel only burn.

  • Where are the BIOS update release notes - Satellite P300-Q01

    I have a Satellite P300 Q01 - there have been two BIOS updates since I bought it W360 and W390.
    Where can I find the release notes detailing what is fixed/changed in each release?
    Thanks

    Unfortunately you will not be able to find them. :(
    I don't understand why but this info is not published.

  • My A215 crashed during when unsing the bios update.

    My A215 was locking up and my screen going blank several times a day. I had to restart each time to recover.  I went on to the Toshiba Web site and it suggested to update the BIOS to correct the problem.  I down loaded the appropriate update and started installing through Windows until it beeped once and went dead. My computer went down on step 7 of 14 during the install of the update.  Now my computer will not even boot up nor will my screen even come on.  A friend suggested using a bootable CD to possible recover the BIOS.  I believe I was using the 1.70 flash update.  Can someone give me some directions on how to recover my laptop without using the Recover Disc and wiping out all my data?
    Thanks in advance,

    It sounds as though the crash during the BIOS flash process left you with a corrupt BIOS.  If that's the case, the only fix is to take it in to a Premier (preferably) Authorized Service Provider to have it repaired.  There is nothing you can do at home to remedy the situation.

  • Stellite L40-14B Fail after BIOS Update 5.40-WIN

    after I run .bat file from archive ( steb by step as in instruction) it says "plise wait" , but nothing happened. I'm wait about 5 minute and restart manualy and enter in BIOS version was 5.40. After it i turn off notebook and it not turning on. What can i do?

    Unfortunately buddy... bad news... in your case something went wrong during the update procedure. BIOS update is always risky.
    In my opinion you should contact the Toshiba ASP which is responsible for you county and should ask for the help...
    As far as I know the guys could flash the ROM module again and tehn the notebook should run again.
    Good luck

  • Any news of the BIOS update to support the Athlon X2's

    Wonder when we will see the BIOS for these bad boys turning up?

    Still waiting for a reliable venice/san diego bios.
    Maybe the X2 will be included or come later as a separate update ?
    VIA and ATI has officially stated chip-support ( 939+940 socket ) for the Athlon64 X2 dual core cpu´s.
    Hot on the heels of AMD's announcement of their Dual-core Opteron processors, VIA has issued a Press Release to state that the K8T800, K8T800Pro and K8T890 chipsets support the new processors.
    http://www.viaarena.com/
    Have not seen any official statement from Nvidia yet.

  • What's the bios update for my board at?

    Hi everyone .. i haven't been here in a long time. Was just wondering what the bios was up to for my board now. And where can i get it. Also if anyone has used it on a board like mine what luck did they have with turbo settings?
    Thanks again.. bd

    Check the MSI website, for bios updates...........

  • Y2P - Installed Energy Manager before the BIOS update: problem?

    So, my yellows are still not the best of yellows.
    I installed the Energy Manager and then saw that there was a BIOS update that you were supposed to install before EM.  Whoops.
    Removed EM, rebooted, and reinstalled, rebooted.  Yellows look a little better, but still a little mustardy.
    Thoughts?

    ok nevermind the above post, I found a utility to make a bootdisk that works from bootdisk.com all my problems went away and am typing this from enlightenment as we speak.

  • MSI R9 270X Gaming 2G has the flicker/jitter issue. Does the BIOS update work?

    Hey all, my internet research led me here for the flicker/jitter issue as seen in this Youtube video. The video isn't mine, but my issue is similar but worse as the screen with completely black out for a second.
    It mostly happens when web browsing, but once in a while it'll happen while gaming. Strangely, it only happens on my primary display, not on my secondary display.
    My serial number (minus the last three digits) is: 602-V303-07SB1312029XXX
    I can't seem to find if the BIOS flash helped anyone or not, I'm assuming it has though because I haven't read any reports of people looking for more help after the flash.
    So here are my questions:
    Which vBIOS do I need and where can I find it?
    My card has the BIOS switch, which position should it be on for the flash?
    Lastly, whats the best method to flash the new BIOS?
    Thank you for your time.

    You can try flash to the latest UEFI vbios TV303MH.1A0...
    This vbios is for all V303-07S card.
    the flash method also wrote in this thread.
    https://forum-en.msi.com/index.php?topic=182256.msg1309322#msg1309322
    Edit: I just check the vBIOS switch, the other vbios should be UEFI already, try switch to the other vbios, and see if the flicker/jitter issue happen?
    http://event.msi.com/2014/vga/Hybrid_BIOS/

  • Embedded Controller update (which is included with the BIOS update) for my T400

    I have a T400. That's all I know.  I'm supposed to dwonload one of these two updates. 
    ThinkPad                                              Package version     BIOS version              Embedded Controller version 
    T400 (with IEEE 1394 models)        3.09-1.05                  3.09 (7UET79WW)     1.05 (7VHT15WW)
    or a
    T400 (without IEEE 1394 models)   3.10-1.05                 3.10 (7VET80WW)      1.05 (7VHT15WW)
    How do I know which one?   
    This answer didn't come with the download directions so a non-techie (me) cannot go further.
    Please help me with this.
    Thank you,
    John

    Hi johnslenovo,
    To check if you have 32 bit or 64 bit Windows installed do check our KB Article on this.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

Maybe you are looking for

  • PLS-00801 error during compile for debug

    Hi, I am working as an oracle consultant, hired by an insurance company to rewrite some stuf they made... They are using a lot of procedures with nested functions/procedures instead of packages :-( Something strange happens though. if you have a proc

  • ONLY Net Value should hit the Sales Revenue GL account

    Hi, My client has a requirement where he does NOT want to hit PR00 & Discount separately to different GL account. They want that the net amount (i;e PR00 - Discount) should only be hit to Sales Revenue GL account. I removed the Account Key from this

  • Magic Trackpad rubber missing!

    The rubber piece on the bottom of the trackpad has fallen out.  The left click is not working now.  I have looked through the Apple site to see if I can get a replacement, but can't find anything.  Where can I find a replacement part? 

  • HT203180 unable to sync data

    i just got an error message stating "116 items cannot be synced. see iTunes for more information"; however, i am not sure where to look to figure out a) what could not be synced b) how to resolve this. any help is most appreciated.

  • MacBook Pro battery capacity dropped to 2%?!?!?!

    Hi Everyone I've recently noticed my battery capacity has dropped DRAMATICALLY in the past month. It's the 2.0GHz quad-core i7 15 inch MacBook Pro, early 2011 model. It is 15 months old, however I bought it brand new (box not even opened) from an eBa