Equium L40 - strange issue burning files using Toshiba CD burning software

Under VISTA and using the Toshiba CD burning software utility.
If I make three very short test files a.wav b.wav c.wav and burn them to a CD-RW I get three files burnt and they play fine on my home CD player.
But they are the wrong set of files!
Usually I find two or more copies of one file and one or more files missing.
For example I might get a.wav b.wav b.wav or b.wav b.wav c.wav .
The set of files I get seems random and different each time I erase and burn again.
Do I have to give up on the Toshiba utility and go back to using Nero or have I found a way to mess up a perfectly good software utility?

I dont know how you have burned such files and what options you have chosen but I have never noticed such problems using the Toshiba burning software.
However, I prefer the Nero burning rom. This software is my favourite and I use the Nero despite of installed Toshiba burning software on my notebook
Best regards

Similar Messages

How can I log BT device IDs names in a log file using Toshiba BT stack

Hi,
without Microsoft stack I can't use a lot of freeware programs (BluetoothView.exe, BluetoothCL.exe, BTScanner for Windows) to "catch" bluetooth devices in a log file.
How can I log bt device ids/description names in a log file using Toshiba Bluetooth stack?
Thank you

I've just contacted Toshiba here:
http://aps2.toshiba-tro.de/bluetooth/?page=faq/sdk
There are other solutions for Windows XP or Toshiba SDK is the only one?

TS1436 I cant burn CDS using itunes but burns using windows media. itunes up to date what now?

I cant burn cds using itunes but burns in window media.itunes up to date what now?

Join the crowd. I was thinking of going back to a previous version, but had heard that could be a problem. Fortunately, I have more than one computer and things work fine there. I'm thinking it could be the burner in the problem computer, but it was working just fine before the upgrade...

ITunes(7.3.1) Issues. File size adjustments. Burning to CD

I notice that there seems to be issues with 7.3.1 perhaps this is one.
Main Issue. I have 'imported' some mp3 files of non copyright speeches from an mp3 CD into my library .I would like to re-burn these (Using Toast 8.0.1) to a single CD but the total files size is 811.9MB, too big for an mp3 CD.
I copied these files into a folder and tried re-importing them individually using the import function experimenting with different settings in Preference>advanced>importing>custom but to no purpose. The file sizes remain stubbornly as they were.
Secondary Issue. I notice that inserting an mp3 CD into the mac does not result in it being recognised nor playing automatically even though the preferences have been set to "Begin Playing on CD insert".
I have visited the usual suspects, Discussions , iTunes support but to no avail...why don't the files reduce in size when I set the system to do so...each file imported individually...the help material is quite specific but dinada!
Life is too short; any passing Samaritan?
Iain

Main Issue. I have 'imported' some mp3 files of non copyright speeches from an mp3 CD into my library .I would like to re-burn these (Using Toast 8.0.1) to a single CD but the total files size is 811.9MB, too big for an mp3 CD.
*I copied these files into a folder and tried re-importing them individually using the import function experimenting with different settings in Preference>advanced>importing>custom but to no purpose. The file sizes remain stubbornly as they were.*
Because you are not changing anything with files.
When you use Import for MP3, AIFF, WAV, AAC or Apple Lossless, it simply adds the file to iTunes.
If you want to convert them, set your *iTunes prefs* -> Advanced - Importing to what you want to convert to.
Select the file in iTunes, then menu Advanced -> *Convert selection to* {what is in yoru prefs}.
Importing only converts audio CD to what is set in *iTunes prefs* -> Advanced - Importing.
*Secondary Issue. I notice that inserting an mp3 CD into the mac does not result in it being recognised nor playing automatically even though the preferences have been set to "Begin Playing on CD insert".*
Begin playing on CD insert applies only to audio CDs.
If you want to add these files to iTunes, use File -> Add to library.

HP Pavilion dv3 notebook PC can't burn files using the primary dvd drive.... always hangs in 5%

my HP Pavilion dv3 -4103TX notebook PC have a problem in burning any files.. until now it doesn't work. I update the software and still can't burn any files using the built in dvd rom. please help me how to fix it...

Try reseating (Remove and reinsert) the DVD drive. You can instructions on page#50 over here
After this is done,Run Microsoft fixit from below link
http://go.microsoft.com/?linkid=9740811
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

HT204161 Strange issues (new) to use my password to log in to my Apple ID

Hi, I knew my Apple ID (my email address) and password and have been using these login details for a long time. But all of a sudden, I started having trouble to use these same login details since today. I thought I may have forgotten the password, so I requested a password reset, using my Apple ID. But the reset email was sent to my husband's email address, which I happened to use to purchase some iTunes credits (using this very same Apple ID) a few years ago.
Today I have been trying to reset my password, by the reset email (forwarded back to me by my husband), as well as by answering security questions correctly. It showed on the screen each time that the password was reset successfully, but each time when I went back to login with the Apple ID and the new password, the system did not let me log in. Strange thing is the successful password reset email(s) were also sent to my husband's email, not mine, which should be my Apple ID.
Now I'm thoroughly confused - does the Apple ID system all of a sudden did something unusual and confused itself with my details???
Please help! Many thanks!

Try and not change anything at the moment Read
http://thenextweb.com/apple/2015/03/11/the-apple-app-store-is-having-problems-an d-itunes-connect-is-down/
and http://www.apple.com/support/systemstatus/

Equium L40 10X Blinking green power LED

Hi Guys,
I have an old Equium L40 that I haven't used it in a while.
Now when I plug the power adapter in the power led just blinks green constantly.
I've checked the blink codes but I can't find one for mine. It simply turns green for a second and then off.
Then green for a second then off and does this constantly.
I've tried removing the battery for a few minutes and then holding the power button down for a minute, but I just get the same result. The power adapter is a the one that came with the laptop and as far as I can tell works fine.
Any other ideas would be greatly appreciated!
Thanks guys!

Hi
Power Indikator (DC IN) indicates the power status with the AC adaptor connected.
The green (not blinking) means power is being supplied and the computer is turned on.
The power indicator on the front of the computer will glow green when the computer is switched on.
The blinking amber indicates power is being supplied to the computer while the notebook is in sleep mode.
Unfortunately, the DC IN green blinking status looks like a hardware problem.
Probably the power supplied to notebook is abnormal or there are some problems with power supply electronic on the motherboard.
By the way: please check the RAM modules. Remove one and test the unit using only one module in each slot. Check both modules.
Some years ago, a friend of mine has had some problems with the notebook. The blinking LED indicated the RAM issue

How to find previously burned files?

Please explain this:
How do you find the previously burned files when you went to burn one of them again and another file is open? I understand that they are put in /cache/dvdstudioprofiles/VIDEO_TS (when using BUILD/FORMAT). But there's no way you can choose on DISC NAME those previously burned. I tried typing in the file name (that is found in the CACHE/VIDEO_TS without the extension "layout"), clicked enter but it burned the file that is open, not the file I entered in the Disc Name.
I'm a newbie and a little slow here, so please explain well. Thanksssss

Thanks for your response.
But how then do you start to burn file that's previously burned? Do I need to open the project that I want to burn to make it active and then do BUILD & BURN? Is that how straightforward it is?
I go this from a thread. Is it really reliable this way? I know, i know, i have to do it to know it. But it would be great if you can just tell me.
"""If you've made a few changes to the DVD, you can use the "Build/Format" button in the toolbar. It will pop up with a window similar to that of the Format window. Click "Build & Burn." It will tell you that a VIDEO_TS directory already exists, and it can reuse as much of it as possible. You can then click "Reuse" to build the new portions of the DVD, and then it will burn it on a DVD."""
Thanks again. God bless!!!!
btw.. mine is FCP 5.

Should I Use An External Burner For Better Quality With Macbook Pro?

Hey I have a macbook pro and used IDVD to burn a movie but near the end it freezes and kinda skips a bit and I was wondering cause it takes two to three hours to burn will using an external burner be better quality?

will using an external burner be better quality?
Ext. Burners tolerate burning multiple copies with fewer read / write errors better than the stock internal S-Drive that come built into many mac laptops. Stock drives heat up faster than external burners do for the most part. So the answer is, it's very possible you will get slightly better results with an external burner as opposed to an internal laptop S-Drive when burning back to back copies.
I recommend using Verbatim Dvd-r media and burning from a disc image at 4x or slower for best results.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

Strange issue creating a BCP xml format file with double dagger '‡' (alt + 0135) as column terminator with bcp.exe

Hi,
I'm having issues generating a BCP XML format file using a fairly unusual column terminator, a double dagger symbol
‡ (alt + 0135) which I need to support.
I'm experiencing this problem with bcp.exe for SQL2008 R2 and SQL2012.
If I run the following command line:
bcp MyDB.TMP.Test_Extract format nul -c -x -f "C:\BCP\format_file_dagger_test.xml" -T -S localhost\SQL2012 -t‡
I end up with a XML format file like so:
<?xml version="1.0"?>
<BCPFORMAT xmlns="http://schemas.microsoft.com/sqlserver/2004/bulkload/format" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RECORD>
<FIELD ID="1" xsi:type="CharTerm" TERMINATOR="ç" MAX_LENGTH="255" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="2" xsi:type="CharTerm" TERMINATOR="ç" MAX_LENGTH="50"
.. and so on.
You will notice that the TERMINATOR="ç" (Minuscule c-cedilla) is output instead of TERMINATOR="‡". The
ç character, is strangely enough is alt + 135 (and not alt + 0135) so this might more than a coincidence! I know you can specify the codepage but this switch applies the data being imported or extracted and not for the format file
itself (I tried it anyway).
In order to use the XML file to bulk import I manually did a text substitution of 'ç' character for '‡' and then BCP imports '‡' data fine.
This character swap doesn't occur if I generate a non XML format file (the '‡' character is output in the format file correctly) however, this file produces other import errors, which I don't encounter if I use a standard delimiter like a comma. So I have stuck
with the working XML format file which I prefer.
Does anyone know why this is happening? I'm planning to automate the generation the of the XML format file and would like to avoid the additional step of text substitution if possible.
Thank you.

Hi Ham09,
According to your description , we do a test and find that the character of the terminator is changed due to the code page of Operation System. When you choose the different time zone in Data and Time bar, and do the same bcp test, you will find it will
export the different TERMINATOR in your XML format file. For example, you can import the character "ç" (alt + 135) in (UTC-12:00)International Date Line West time zone and (UTC+09:00)Osaka, Sapporo, Tokyo time zone, and check if the terminators are different.
By default, the field terminator is the tab character (represented as \t). To represent a paragraph mark, use \r\n.
For more information, there is detail about code page(Windows), you can review the following article.
http://msdn.microsoft.com/en-us/library/windows/desktop/dd317752(v=vs.85).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Strange Issue with using ExportToHttpResponse for exporting to Excel

Hi,
We are working with BO XI R2 with .Net 2.0.
We are using ExportToHttpResponse method to export the Crystal Report to pdf/excel and directly opening the export in a browser window.
Code being used is as follows :
For pdf : rd.ExportToHttpResponse(ExportFormatType.PortableDocFormat, oResponse, false, Name);
For Excel : rd.ExportToHttpResponse(ExportFormatType.Excel, oResponse, false, Name);
where 'rd' is ReportDocument instance.
The strange issue here is that for pdf output this works as desired and the exported report is directly opened in the browser window. However when it comes to Excel ; it does not open the exported file in the browser window and gives a prompt to open/save file. Even if the 'asAttachment' parameter of ExportToHttpResponse method is set to false it still is sending the exported file as an attachment to the browser and not opening it directly (as it is happening in the case of a pdf export )
Do we need to set the Response.ContentType to excel ; if yes then why it is working in case of pdf.
Can any one please advise about this strange issue .
Thanks
Vinayak Vidhate

>
Ludek Uher wrote:
> Try the following:
>
>
> System.IO.MemoryStream oStream = (System.IO.MemoryStream)crReport.ExportToStream(ExportFormatType.Excel);
> Response.Clear();
> Response.ClearHeaders();
> Response.AddHeader("Content-Disposition", "inline;filename=exportedreport.xls");
> Response.ContentType = "application/vnd.ms-excel";
> Response.BinaryWrite(oStream.ToArray());
> Response.Flush();
> Response.Close();
>
> The code works on my machine.
>
> If that does not help, consider using a utility such as [Charles|http://www.charlesproxy.com] or [Fiddler|http://www.fiddlertool.com/fiddler] to see what's going on.
>
>
> Ludek
Thanks for the response Ludek .
I was going through some othere threads and saw that ExportToHttpResponse is more preferred over ExportToStream . I even checked for setting up the Response.ContentType to Excel . I think I shoulfd give it a try to use ExportToStream.
Let me know if any one else has any other suggestion(s).

Issue with Opening Files using Multiple Actions

I've noticed a strange issue when I attempt to use multiple actions in my Captivate 4 project.
I have a button that does two things: open an HTML file in another window and make another button visible. Of course, for the Open URL or File action, I'm entering the name of the HTML file and select New from the drop-down list so it opens in a new window.
Captivate doesn't seem to store that setting. When I click OK for that dialog box and then OK for the button dialog box, it reverts back to Current.
Is this a bug or am I doing something wrong?
Here I am, setting the property...
...and here's me checking Captivate 4 to see if the setting "stuck" and seeing that it didn't:

Hi there
I've recently encountered that behavior myself. I found it was a lot more reliable to avoid using the Multiple Actions for the Button click. Instead, configure an Advanced Action to do the work and you should have better results.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Toshiba Equium L40 - Recovery Fail

Hi,
My toshiba equium L40 started to become really slow so i decided to start over fresh, so i put in the recovery CD that i got with the laptop and started the recovery, chose the language and the DOS screen pops and starts doing what it does but it then gets stuck at 58% and then eventually cancels.
whats up with it and how am i going to fix it ?

It sounds like either your HD or the DVD is having a problem.
I'm guessing that you have a Toshiba Europe machine? You might check their forums to see if they have any specific knowledge of the issue.
http://forums.computers.toshiba-europe.com/forums/index.jspa

Have a .mp4 video and would like to use it to burn to a disc and be able to be played on a dvd player, should i use idvd or what? also have a .avi file what should i use? thanks please help

Have a .mp4 video and would like to use it to burn to a disc and be able to be played on a DVD player and a .AVI file what program should I use idvd?

iDVD may or may not work with them – depending what kind of MP4 and AVI each is.
Drag them into iDVD and preview them to check compatibility.
If there are issues, use MPEG Streamclip and re-wrap them as QuickTime.
Russ

Equium L40 - strange issue burning files using Toshiba CD burning software

Similar Messages

Maybe you are looking for