Equium M50 - Touchpad issue using Win XP home

Equium M50 sm59E with XP home
I went from everything fine to an optional update from ideacom from windows knocking out my touchpad and keyboard (lots of other people have done the same and their is a growing army of us growing ) I have resorted to a new install that i have done twice now .............
I have got the keyboard working in that if you start up then put in stand by.
Then bring out of stand by. The keyboard stays on (if you dont ....then when you press a key it nocks the keyboard out ).
The touchpad i was puzzled as it wasnt even showing in device manager even though i got the relevant driver from toshiba download site.
But then i found it as a hidden device in device manager with a *!* on it and it says the driver is either not installed, not working, or the wrong one.
I also have none usb devices as hidden devices that are all ok except one that says, serial, but it has no option for to install a driver .
I read somewhere that a man had the same problem with XP and he used a download of Toshiba for downgrading OS and that worked for him but he cannot find it now .
This is reported to be a problem because of human interface updates that are messing up keyboards and touchpads ...................due to touch screen softwares in updates .
Can anyone help me out here i'm at all time low now and have exausted all avenues

This horrible driver crippled my friend's PC with Windows Vista even uninstalling the device driver does not restore the functionality of the mouse. According to some sources it disables the PS/2 port so just how to restore this I'm not sure without further investigation.
For now a System Restore is the only feasible way to restore the mouse the only problem is not everyone is familiar using the keyboard for navigating but for the most part it would involve cursor keys, tab key, and the space bar.
Richard S.

Similar Messages

Satellite Pro P100 - Synaptics touchpad issue using Win 7

Satellite Pro P100 with Synaptics touch pad, was running Vista, now Win 7 64 bit.
The original driver had an option "disable when external pointing device connected".
I have installed a driver from Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7-64_Signed_default.exe which does not have this check box.
It works fine except that sometimes the Microsoft Mouse turns off and on every few seconds as it or the touchpad fight each. I have to disable the touchpad.
Then next time I turn on. If I do so without a mouse, I cannot use the touchpad, until i plug in the mouse, reactivate, then unplug the mouse.
Thanks

Sorry, but this problem is reccurring more frequently (like every 2 or 3 days). The driver you recommend does not have the "disable touchpad when external mouse connected", nor does the Fn+F9 button work. Both touchpad and mouse are active at the same time with the result that the mouse becomes active, inactive, active, inactive every few seconds, and is that happens the secondary monitor goes blank (which is normal when new drivers are being installed, such as for an unrecognised flash drive). Thanks.

I Have Problem " we've encountered the following issues " My Win 7 Home Premuim .. Help me ..

My Pc Info AMD Athlon(tm) II X2 240 Processor 2.80 GHz
2.00 GB
64-bit Operating System
If any One have Real Solve .. Replay me PLease

My Win Version is Windows 7 Home Premium
Copyright 2009
This what u Need ?
About Erorr ..
i Failed To get ScreenShot of it .. So i have to Explain Error
Error Say
'' we've encountered the following issues "
Installer Failed To Intitialize . Could be Due to a Missing File . PLease Downlaod Adobe Support Advisor to Detect The Problem .
Thats Was Error MSG Say's When i Installing Ae CS6
That's u Need ?

WEP Encryption Key not remembered when restarting the Equium M50-244

I am running an Equium M50-244 Laptop, with a BT Home Hub 7838 wireless router. Nearly everytime I power up this notebook it has no wireless connection. I therefore have to go into Control Panel, Network Connections, and get it to find a new connection.
Then have to type in WEP Encryption Key number twice to get a new connection.
This is obviously a lengthy procedure so I need to get the Laptop to recognise the Encryption Key and store it for the next time I power on.
I am running Windows XP Home with Service Pack 2, and a Norton Anti Virus and Firewall.
Any help would be much appreciated
Peter

Hello
I agree with Louis. Your WLAN cards support WPA encryption and, if possible, you should use it.
Anyway: for WLAN configuration try to use Windows settings and defined WEP password should be remembered for your WLAN. I have configured it on many different notebooks and after choosing the listed WLAN the password was already defined and only thing that must be done is to click on button Connect.

Win 7 home

The highest resource FPGA I will be using is the Artix-7 100T with Vivado. Can I use win 7 home for design implentation and programing of the Artix-7 100T?
Thanks
LDS.

Hello ,
The supported OS mentioned by Pratham only meant that Vivado has been tested for these OS by Xilinx and we guarantee that it will work. However If you are using any other OS it may or may not work as these are not tested.
So i suggest you to use supported OS to avoid any issues in future.
Thanks,
Syed

Error: Platform version 6.0 is not compatible with minVersion = 6.0.2 maxVersion = 6.0.2 so what do I do? Using Win 7

Error: Platform version 6.0 is not compatible with minVersion >= 6.0.2 maxVersion <= 6.0.2 so what do I do? Using Win 7 Home Premium

If you use ZoneAlarm Extreme Security then try to disable Virtualization and do a clean reinstall.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]]

Equium M50: Which cable can I use to connect to TV?

I want to hook my computer up to my TV. I went into my local computer shop but they showed me about 5 different cables and I had no idea which one would work best or work at all. Can anybody advise me on which cable would work for my computer the Equium M50-192? Or can I even buy such a cable online?
Thanks in advance.

The cable you need is S-Video however not all TV/Video equipment provide full S-Video support resulting in a black and white image. This minor issue can be resolved using a S-Video to Composite adapter such as one sold by Maplin at the sacrifice of quality
http://www.maplin.co.uk/Module.aspx?ModuleNo=28733
Richard S.

When using FF 5.0, rollover type ads on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX

When using FF 5.0, rollover type ads (i.e. ads for XBOX) on Facebook game Lexulous pages are 'enlarged' and block 1/3 of the game board. Using up to date versions of Win 7 Home Premium, Adobe Flash and ActiveX on an HP Pavillion dv7 laptop. Does NOT happen at all in MS IE 8, but occurs every time in FF 5.0.
Also, Google 'translate this page' links do not work in FF 5.0, but works in MS IE 8. All I get in FF is a blank page, time after time.

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

Equium M50-164 - Touchpad problem if AC/DC adaptor is connected

Hi
Can anyone help? My Toshiba Equium M50-164 has an intermittent problem with the touchpad. Sometimes its fine, other times the cursor will jump around the screen uncontrollably then just lock up, the problem goes away when I remove the power cable and returns when it is reconnected.
Other times it is fine with the power cable connected, this suggests possibly the power supply is causing a problem to me, but I was hoping someone with more experience could give me some advice.
Thanks in advance.
lbansal

Hi
Are you using an original Toshiba AC/DC adaptor or one from a 3rd party manufacture?
Its not easy to say what the reason is, it could be a problem of AC/DC adaptor or mainboard.
I think the best way is you contact the nearest authorized service provider. Go to them with the notebook and AC/DC adaptor and ask a technician for help. They can check the notebook and hardware.
Good luck! :)

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Win 7 Home Preminium - unable to use adobe 9 after download

Hi Just downloaded adobe 9 and unable to use it. Is this program not compatable with Win 7 Home Prem?

Thanks for replying but the problem is solved I've deleted that one and downloaded adobe reader X which is now working.
Date: Fri, 3 Jun 2011 03:00:47 -0600
From: [email protected]
To: [email protected]
Subject: Win 7 Home Preminium - unable to use adobe 9 after download
What did you download? There is no software product with the name 'adobe 9'.
>

What HDD can I use in Equium M50-236

hello:)
I must upgrade my harddrive, I have today 60gb and I wonder wich HDD I must buy?
Like.... how big HDD my computer can take???
I have check out this for example Western Digital Scorpio Black WD3200BEKT 16MB 7200 RPM 320GB 2.5tum S-ATA
My computer is Equium M50-236.
please help
Dennis Norlin

Hi
As Im not mistaken the notebook supports the IDE controller and NOT SATA.
So if you want to upgrade the HDD then you have to use an IDE HDD!!!
I recommend using max 120GB HDD because it could be possible that bigger HDD size will be not recognized by BIOS.
Greetings

No sound on web videos like YouTube, Yahoo, etc but sound on them using Chrome. Sound works in Win Vista Home 32 bit and in media players. Just no audio using Firefox 4.0 Unninsdtalled and re installed Adobe Flash 10.2.513.1

No sound on web videos but sound if I download them and then play them using any media player ( I use VLC 1.1.2) MP3s play fine.
Audio fine on same videos using Chrome. Sound fine on Win Vista Home 32 bit No audio using Firefox 4. Adobe Flash 10.2.153.1
Have un installed and reinstalled it rebooting each time. Same Videos play fine in Chrome so problem must be in Firefox/flash combination.
http://www.codecguide.com/fix_for_flash_sound_problems.htm
http://forums.techguy.org/multimedia/490867-fixed-adobe-flash-no-sound.html

No sound on web videos but sound if I download them and then play them using any media player ( I use VLC 1.1.2) MP3s play fine.
Audio fine on same videos using Chrome. Sound fine on Win Vista Home 32 bit No audio using Firefox 4. Adobe Flash 10.2.153.1
Have un installed and reinstalled it rebooting each time. Same Videos play fine in Chrome so problem must be in Firefox/flash combination.
http://www.codecguide.com/fix_for_flash_sound_problems.htm
http://forums.techguy.org/multimedia/490867-fixed-adobe-flash-no-sound.html

How to install this update and solve USB and touchpad issues?

I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
Driver revision history:
Twinhan VP704A Driver Release note
Note:
1.In case the system crashes while running with VP704A, Please install ULI
USB 2.0 host driver in \ULiUSB20Driver
2. For XP/SP1, please update with the patch in
<http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
3.In XP/SP1, updating driver will crash the system, while new install is ok.
The trick to update driver in XP/SP1 is shown in the following steps,
a. Uninstall the driver
b. Unplug and plug the USB device
c. Install the driver
4. To support remote controller, please launch Agent.exe in \Agent.
Further details can be found in \Agent\Readme.txt
Known issues:
1. Multi-instance is not supported
2. Remote wakeup is not supported
3. High CPU usage in Analog audio/video capture
4. Bad VBI Signal using YUY2 color format
5. AV out of sync if audio captured from wrong filter.
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
6. Noise with analog-TV and FM Radio
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
Driver revision history:
2005/10/24, Version: 1.0.2.8
Bugs fixed and new features:
1.Crossbar not properly set.
2005/10/21, Version: 1.0.2.7
Bugs fixed and new features:
1.Firmware version read from FLASH OK!
2005/10/14, Version: 1.0.2.6
Bugs fixed and new features:
1.Mutil-Access driver blank part below part screen when VBI!
2.Mutil-Access driver HCT driver verify crash fix!
2005/10/07, Version: 1.0.2.5
Bugs fixed and new features:
1.Tuner Power off when S-Video,Composite.
2005/09/30, Version: 1.0.2.4
Bugs fixed and new features:
1.Agent.exe updated for repeat bug!
2.TI5150 Register for Video Format fix!
2005/09/29, Version: 1.0.2.3
Bugs fixed and new features:
1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
Note: "USB Audio device" filter provided by system does not support mutil-Access.
2.Reset TI5150 when a new frequency is set
2005/09/27, Version: 1.0.2.2
Bugs fixed and new features:
1.Fix I2C unstable access on some devices.
2005/09/23, Version: 1.0.2.1
Bugs fixed and new features:
1.Analog TV becomes darker sometimes.
2005/09/15, Version: 1.0.2.0
Bugs fixed and new features:
1.Fix INF for Windows 2000 installation.
2.FM radio scan policy changed!
2005/09/13, Version: 1.0.1.9
Bugs fixed and new features:
1.USB serial number string not visible with USBView, firmware update required.
2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
2005/09/13, Version: 1.0.1.8
Bugs fixed and new features:
1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
2005/09/12, Version: 1.0.1.7
Bugs fixed and new features:
1.Improve channel lock status check performance
2.Pinnacle INF Fix.
2005/09/09, Version: 1.0.1.6
Bugs fixed and new features:
1.Add some audio initialization function.
2005/08/31, Version: 1.0.1.5
Bugs fixed and new features:
1.NTSC & PAL mode resolution separation.
2005/08/30, Version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2.Frame Drop.
3.Pinnacle inf file HCT chkinf fail.
2005/08/22, Version: 1.0.1.3
Bugs fixed and new features:
1.Add Remote controller interface in digital source filter.
2.A new Remote controller test tool with source code in \Test_RC.
2005/08/16, Version: 1.0.1.2
Bugs fixed and new features:
1.Reorg Pinnacel & Twinhan's driver & folder.
2.VP704A_BDA_Test tool, add system code test.
3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
4.Firmware update
2005/08/15, Version: 1.0.1.1
Bugs fixed and new features:
1.Serial number function is lost while adjusting TV audio volume
2.RC6A CIR support
(This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
EEPROM should be flashed with \Firmware\M9207.bin )
3.Serieal number, MAC address and OEM device name supported.
Please refer to further details in \Firmware\readme.txt.
4.Ioclt sample source code included.
2005/08/08, Version: 1.0.0.10
Bugs fixed and new features:
1.Analog TV audio volume increase.
2005/08/04, Version: 1.0.0.9
Bugs fixed and new features:
1.Analog TV Video mode set failure.
2005/08/03, Version: 1.0.0.8
Bugs fixed and new features:
1.Off-centerf requency scan +/- 125Khz
2.Fix duplicated program scanned in MCE.
2005/08/02, Version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
2005/07/28, Version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
2.Improve I2C communication stability.
3.Unify Signal strength & quality indication as THBda ioctl interface.
4.Capture filter Lock status check.
2005/07/28, Version: 1.0.0.5
Bugs fixed and new features:
1. The same signal strength & quality indications as VP7046.
2. Debug build driver
2005/07/21, Version: 1.0.0.4
Bugs fixed and new features:
1.Update INF.
2005/07/20, Version: 1.0.0.3
Bugs fixed and new features:
1.Improve performance in PCM4
2.Switching from Analog TV Mode to FM Mode failure
2005/07/04, Version: 1.0.0.2
Bugs fixed and new features:
1.Production Tool FM test OK!
And here is the readme from the other file within the update ?
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
INTRODUCTION
This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
and Windows XP.
CONTENTS OF THIS DOCUMENT
1. Installation Instructions
2. Uninstallation Instructions
1. Installation Instructions
(Windows 98 SE & Windows ME)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system,then restart your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows 2000)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows XP)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- Click "NEXT"
- This program will install and load the driver and you don't have to reboot the
computer.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller", continue to install.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
Notice:
If you can't setup driver successfully. Please reboot your system and then follow
above steps to install driver again.
2. Uninstallation Instructions
1. Open "Control Panel" folder.
2. Invoke "Add\Remove Programs" icon.
3. Choose "ULi USB2.0 Driver" item.
4. Click on "Add/Remove" button to remove drivers.
Change List:
1.74
1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
2.support all USB2.0 Host Controller.
1.73
1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
4.fix issue that wirless lan will disconect when plug-in usb device.
1.72
1.Fix issue that system will crash when USB HD copy large file.
1.71
1.improve Power management function in Win98/ME.
1.70
1.Improve the function of devcie detection.
1.62
1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
1.61
1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
1.60
1.To support power management functions when a HUB with USB device plug into
a root HUB.
1.57
1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
2.Fix issue that audio can't display smooth when USB device attach to system.
3.Fix system can't detect USB dvice when USB device attach to system in
suspend mode.
4.Fix issue that when USB root HUB have full loading, USB HD sometimes
transaction fail.
1.56
1. Fix issue that DVD decoder device can't display properly.
1.55
1. Fix OTI USB 2.0 hand drive can't be detect issue.
2. Fix USB mouse can't use after resume from suspend.
1.54
1.Improve driver security.
1.53
1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
1.52
1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
automatically fix file system errors
2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
v.1.51
1. Improve USB 2.0 cardreader compatibility.
2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
v1.50
1. Improve bulk transfer
v1.48
1. Fix USB 2.0 LAN driver installation hanging up
2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
3. Fix some laptops Win98SE booting hanging up
v1.47
1. Improve bulk transfer performance.
2. Fix USB 2.0 bulk webcam preview failure.
v1.46
1. Support USB 2.0 and 1.1 Isochronous devices
2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
4. Improve device detection capability in Win9X/ME
v1.45
1. Fix system hanging up when resuming from ACPI sleep mode.
2. Fix mouse sometimes doesn't disappear when it's unplugged.
3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
v1.44
1. Support composite device
2. Improve device detection
v1.43
1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
2. Fix high-speed device detected as full-speed device
3. Fix some USB mouses detection failure problem
4. Fix some USB 2.0 hubs detection failure problem
5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
v1.42
1. Fix PC Card ejection hanging up in Win98/ME
2. Fix suspend/resume hanging up in Win98
3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
4. Fix some PC Card USB 1.1 device detection failure
v1.41
1. Add new feature that system can install driver before device is plugged.
2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
v1.40
1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
v1.32
1. Fix issue that driver can't detect Microsoft driver in Windows XP
if OS path is not c:\windows.
2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
v1.31
1. Fix issue that driver can't install on Windows 2000.
v1.30
1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
3. Fix issue that sometimes when you click "Scan for hardware changes".
to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
file can't be found.
4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
verison of ULi EHCI controller devices are plugged and unplugged.
5. Support installing driver for more than one ULi EHCI controller devices existing on
system at the same time.
6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
v1.20
1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
ULi Coporation. (ULi) web sites:
http://www.uli.com.tw/ (Taiwan)
CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Equium M50 will not recognise the LAN port - error: Network Cable unplugged

I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
I used to connect via an 'ADDON' Modem/ADSL Switch and had no problems. I then replaced the ADDON with a 'NETGEAR' DG834G ADSL Modem/Router to gain the wireless port, and since then my machine will not recognise the LAN port. <error: Network Cable unplugged>.
I know that the cables are OK as I used them with other laptops and had no trouble. I can also plug in a PCI card to connect without any problems. It looks to me as if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.
Anyone out there with a similar experience and some advice/suggestions?
PLEASE

Hi
For me it doesnt show like a LAN card problem but your router is a problem.
Check the device manager if the LAN card was properly recognized. If there are no yellow exclamation marks so everything is ok!
You can try to delete the LAN card from the device manager and after new reboot install the LAN driver again.
The issue has stared after installing or connecting the new Netgear modem router.
Therefore I would recommend to checking firstly the settings or to update the firmware on this router.
I have found additionally these useful websites
http://compnetworking.about.com/od/windowsnetworking/f/cableunplugged.htm
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_20381405.html

Equium M50 - Touchpad issue using Win XP home

Similar Messages

Maybe you are looking for