Equium M50 will not recognise the LAN port - error: Network Cable unplugged
I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
I used to connect via an 'ADDON' Modem/ADSL Switch and had no problems. I then replaced the ADDON with a 'NETGEAR' DG834G ADSL Modem/Router to gain the wireless port, and since then my machine will not recognise the LAN port. <error: Network Cable unplugged>.
I know that the cables are OK as I used them with other laptops and had no trouble. I can also plug in a PCI card to connect without any problems. It looks to me as if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.
Anyone out there with a similar experience and some advice/suggestions?
PLEASE
Hi
For me it doesnt show like a LAN card problem but your router is a problem.
Check the device manager if the LAN card was properly recognized. If there are no yellow exclamation marks so everything is ok!
You can try to delete the LAN card from the device manager and after new reboot install the LAN driver again.
The issue has stared after installing or connecting the new Netgear modem router.
Therefore I would recommend to checking firstly the settings or to update the firmware on this router.
I have found additionally these useful websites
http://compnetworking.about.com/od/windowsnetworking/f/cableunplugged.htm
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_20381405.html
Similar Messages
-
Windows 7 installation will not recognise the Bootcamp disc!
I have a 2008 Macbook running Snow leopard.
Installed Win 7 via bootcamp but when I insert the Mac Snow Leopard disc to install the Bootcamp drivers etc after the Win 7 install has succeeded, the Windows 7 installation will not recognise the disc!
Any ideas
Thanks in advanceIf you used your Leopard DVD then it won't work.
As ScuseMe said only the OSX Snow Leopard DVD contains the drivers for Windows 7.
Stefan -
I have an existing account with an iPod classic device. I now have a new nano and want to add this as a secondary device. However when I connect this my account will not recognise the new device. How do I resolve this?
I have 4 iPods all utilizing iTunes on the same computer. If you open iTunes and THEN connect the new nano, it should automatically recognize it. Does it give you an error message?
-
My mac will not recognise the camera on my iphone so i cannot move my photo's
my mac will not recognise the camera on my iphone so i cannot move my photo's. it has worked fine in the past. i recently moved itunes to an external hard drive and that will still connect for music etc. but the phone does not show up in finder at all the mac just keeps beeping and saying no camera found any ideas please?
Hi Sylvia's iMac,
Welcome to the Apple Support Communities!
It sounds like you need to reset the administrator password on your computer. Please follow the instructions in the attached article for information on how to complete this process. The article has instructions for Snow Leopard (10.6) and earlier, but there is also a link within the article for assistance in Lion (10.7) or later.
OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support
Cheers,
Joe -
I have just purchased an IPAD 2. I have tried to connect it to my DRAYTEK 2820n router but it will not recognise the correct password. My IPHONE 4 has no problem in connecting to this router using the same password. I understand that the wi-fi connectivity is the same for the two apple products so cannot understand why the IPAD will notr connect. Has anyone any suggestions?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
8.1 will not load the dvd driver error 39
The dvd played with no problem in 8, worked fine. I loaded 8.1 now it will not load the driver, says error 39. I uninstalled and reinstalled still the same. I got a external working DVD, plugged it in and the same code, same problem. windows
8.1 does not load the DVD driver.
what is the fix I understand it 8 does not play dvd movies, video this does not even recognize the player for music CD
jack walshPlease repost your inquiry in the
Windows 8.1 Community Forum. Thank you!
Carey Frisch -
Bridge and Photoshop CS4 will not recognise the images shot in NEF file
Shot in Nikon D810 with NEF file but the images will not recognise with Bridge and Photo
shop CS4That camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run. You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
Mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6 -
I downloaded the Java update version 7 update 9 as advised by computer - but the computer does not recognize the download - as instructed I pressed Command R and also tried Command Q
I downloaded the update twice - still the computer does not recognise the download.
In my serarch on the web there seems to be issues in this download.
I think there is an new patch , Not sure where to find this that is relevant to my computer.
Be grateful if someone could send me a link and instructions on the relevant choice for my computer.
Also Do I need to uninstall old Java downloads. if yes Please advisee how I should do this.
Be grateful if you could send me a link that will allow the updated Java to be recogized by my computer Mac Version 10.7.5
thank you
SueI have downloaded the latest Java (JRE) and Java is checked enabled as well as JavaScipt and Web plug-ins are enabled.
I thought I would download once again from your link - MacOSX jre7u6 Macosx-x64 dmg.
On opening the package to install was advised that a higher version of the JRE is already installed on the system.
Still unable to open my Labs software as the advice is still to download the latest Java.
Checking the net again found another Java option for Mac Lion - so I downloaded and installed the version OS X2012 -006.
Still no joy, as my photo Lab software keeps givng me the same message that i to open " RGB Digital Direct" I need to download the Java Runtime Environment for Web Start Application.
I then went back into Java Website and it gave an option to detect whether I have the correct Java Software - report came back - Verified Java Version - " Congratulations You have the recommended Java installed ( Version 7 Update 9)"
BE grateful of your expert advice.
Sue -
Trying to activate my 3GS and the phone will not recognise the sim and will not activate
Help Please
I have changed my call plan with my service provider from contract to PAYG and have just tried to upgrade my 3Gs to IOS 5.0.1. I have purchase a iPhone 4 and was using the 3Gs as back up.
I set the phone to factory restore as it was being sluggish and I felt a restore would be the best option. The restore went ahead but the phone will not accept that I have a valid sim in the phone and will not activate stating that the servers cannot activate the phone.
The sim is the new PAYG sim given to me by O2 and I had even arranged for the number to be transferred to the PAYG sim. I am at a loss to understand what has happened as the sim will work fine in an old 8gb Iphone 2g and other mobiles. I have not kept the old contract sim so I am unable to insert that to see if that was the problem.
How can I get my 3Gs acitated and working? Do I need to contact O2 or take the phone to an Apple store. Any advice would be appreciated.You need a valid micro-sim. to acivate.
IOS: Resolving iPhone activation messages
http://support.apple.com/kb/TS4242 -
I have just downloaded the most recent version of Firefox and have this problem. Updating does not help. Setting the old version to 'never activate' deactivates'both. Please help - I am having to use Chrome!
Hi.
It was here: C:\Windows\SysWOW64 - just deleted the exe and the dll.
Thanks very much for this very simple solution to a frustrating problem - now i can stop using Chrome. :)
Have a great day.
Cheers,
Matt -
I really need help, i had just finished activating my iphone, and now im loosing money because i cannot use it.
What was the error number? That would be very useful since the following gives actions for various errors.
http://support.apple.com/kb/TS3694
Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes. See:
http://support.apple.com/kb/HT1808 -
Hi - can someone help please? I recently update to ios 5 from ios 4.3 and updated Itunes to 10. On restart and configuration as part of activation process, it tells me that activation is not possible and itunes tells me that iphone does not have a sim card (it does). I seem to be stuck - can anyone please help?
KulbirfromhuntingdonHi - can someone help please? I recently update to ios 5 from ios 4.3 and updated Itunes to 10. On restart and configuration as part of activation process, it tells me that activation is not possible and itunes tells me that iphone does not have a sim card (it does). I seem to be stuck - can anyone please help?
Kulbirfromhuntingdon -
I have a home wi-fi network based on a Time Capsule (3rd Gen.). I recently added a new "n" Airport Express to extend my wi-fi coverage to areas of my home where the signal has been weak or non-existant. The setup went very well (Airport Utility 6 on my MacBook Pro running Mtn. Lion) and was extremely simple and trouble free. Now I am attempting ot plug an ethernet device (internet bridge reciver from a wirelss weather station) into the LAN port. The weather station instructions say the device should communicate fine plugged directly into my router (not physically available where the device needs to be) OR plugged into a LAN port of an ethernet hub. My question is then: with the Airport Express in wi-fi extend mode, is the LAN port available to cable internet devices into the network?
My question is then: with the Airport Express in wi-fi extend mode, is the LAN port available to cable internet devices into the network?
Yes, assuming that the setup went correctly.
Test by moving your laptop or other computer close to the AirPort Express. Temporarily, turn off the wireless on the laptop and connect it using a spare Ethernet cable to the LAN port on the Express.
See if you can get an Internet connection. If you can, you know the Express has been configured and is functioning correctly.
Since the Express is in bridge mode when it "extends" both ports become LAN ports, so if you have a second device that needs an Ethernet connection, connect it to the WAN port as it will work as well. -
Can any help. I want to transfer photos on my Iphone 4s to my PC, my computer will not recognise the phone when I connect via the USB port to the PC. Any Ideas would be appreciated.
Do you get any response from the computer when you plug the phone in? I'm guessing that you are going into Computer to see if you find the phone? If you go into Device Manager, do you see any errors in the USB area?
See this support document and pay particular attention to step 5 regarding drivers. http://support.apple.com/kb/TS1538 -
Itunes will not recognise music on my ipod?
I have recently encoutnered a problem with my 5th generation 60gb ipod which I'm hoping someone can help me with?
When I plug my ipod into my computer and open itunes, it recognises that the ipod is plugged in, but asks me to set-up the ipod, like it is the first time I have used this ipod. Also it does not recognise any of the 5,000 or so songs on the ipod.
When my ipod is not plugged into my computer all 5,000 songs still appear on it and play with no problems.
For some reason itunes will not recognise the songs on my ipod - even though I have added them all with this software and about a third of them on this computer.
If I choose to proceed with the set-up of my ipod, I am afriad I will lose all 5,000 songs off my ipod.
Can anyone offer a suggestion - as it is, I either wipe my ipod or concede that I can't add any more songs to it, even though it is only half full.
Oh yeah, I have added all files to my ipod manually.
Thanks!When I plug my ipod into my computer and open itunes, it recognises that the ipod is plugged in, but asks me to set-up the ipod, like it is the first time I have used this ipod. Also it does not recognise any of the 5,000 or so songs on the ipod.
With those symptoms, it's probably worth checking to see if you're getting a Windows drive letter confusion. For troubleshooting advice on that, see the following document:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
Maybe you are looking for
-
How can I download version 3.6?
-
Screen has zoomed in and wont go out again
my ipod touch has suddenly decided to zoom in really far and wont go back out again therefore cant really use any of the apps and is generally more difficult to use. please help
-
How to find out newly generated Task Id in Sequential WorkFlow
I have following scenario... Have a replicator activity to create multiple tasks However I dont want to send OOB notifications. So I have added Sedmail. Challange is to know the newly generated task Id after the create task execution. Note that Repli
-
Hello, is it possible to set a filter in PCUI lists by coding? For example, we want to filter the lists of products in application Sales_Order by those that have a product number "11", but not manually enter "11" into the filter line, but for example
-
How do I download legacy java 6.0 SE runtime?
How do I download legacy java 6.0 SE runtime?