Equium M70-339 - not possible to record through internal microphone

I have an Equium M70-339 (running XP home) not recording through internal microphone
The internal michrophone is not detecting voice - no wavy line on sound recorder and Skype not picking up my voice, yet the device manager tells me it's working properly and the microphone is selected in sound and audio settings.

Are you really sure that your notebook model has an internal mic? I have Satellite M70-159 and there is no internal mic.

Similar Messages

Equium A60 does not see a recording drive

Sadly more help is needed with my Equium A60 following on from the earlier fault of the missing CD\DVD drive. Thanks for the help earlier, I did get my cd drive back in 'My Computer' and it does read cds..
Today I tried to put some mp3s on a known working CDRW and my DVD writer is not seen. I get a error message saying you don't have a cd writer.. I have CD Creator 6 which I have been using ok before, that too does not see a recording drive on my laptop.
I can no longer format a blank cdr or drag and drop on a cdrw formatted previously.
Any ideas anyone.?? Thanx.!!

Hi,
in 'My Computer' right-click on the DVD drive and select properties. Check if on the record tab CD-recording is activated.
Bye

MSS Approval of hours not possible: because record is changed?!

Hello,
I want to execute approval of hours written in CATS/ESS. Approving hours in MSS recorded on activity type and/or wage type is no problem. When I record hours on an plant maintenence order (AUFK) in ESS/CATS and I want to approve that record then in MSS after hitting "review" in the collective approval screen that record cannot be saved. The reason is "Saving is not possible: record has been changed".
To elaborate: If I enter an hour record for a wage type and one for an order number then in the approval screen after pressing "review" I can save the record for wage type, but not for the hour record for order number (reason is "Saving is not possible: record has been changed". ). Does anyone came accross this problem. There doesn't seem to be a not.
Do I need to setup something specific in the backend for approving hour records written on ordernumbers? I did not find any OSS notes concerning this matter.
Thanks in advance,
Kind regards,
Mirko

Hi Siddharth Rajora,
I've found the same problem where I can save when recording to Project System network activities using activity type, but data cannot be approved when using wage type to Project System network activities.
Based on the note 1125791, it states that a correction need to be made to the program, however, I've checked my system and it seems like the correction has already been delivered in my current support package. But still the message "Saving is not possible: record has been changed" is coming.
Regards

Satellite Pro M70-113: Not possible to write on CD-R and DVD-R

Hello,
I have a Toshiba satellite pro m70-113 laptop.
Reading Problems:
I am unable to read any cd-r. This is really strange as a couple of days earlier those CD-R were reading fine on my drive.
and when i click the cd drive in my computer an error dialog shows and says F: is not accessible/incorrect function. Here is a screenshot for the error..:
http://img64.imageshack.us/img64/9574/1bp3.jpg
And when I try to read my DVD-R, some times they read fine but sometimes it doesn't read it and the LED of the drive keeps lit when it doesn't read the dvd-r.
When it doesn't read the DVD-R, the following error comes: Screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg
Writing Problems:
After getting the reading problems I tried to test my drive for writing.
And i found that I am unable to write on cd-r. I used alcohol, and Nero both but no success.
Though same content when burned on cd-rw its a success.
I am able to burn successfully on DVD+RW 4x media, with data amounting to almost 4.34GB for DVD5..
When I insert a DVD-R media the drive doesnt detect it as a blank media and the LED keps on lighting constantly and so nero at this state doesnt detect my dvd drive even! So i am not able to write to my DVD-R media..
In short: only write to RWs is possible for both, cd-r and dvd+RW, and no writing possible on CD-R and DVD-R.
Please help me.
It's only 7 months since I purchased this notebook and believe there can be no other person on this planet who takes care of the drive better than me!
Really, I have not used this drive much and never inserted scratched/degraded/local media, only moserbaer media.
Thank

Hi
Well, according to your description it sound like the drive cannot calibrate the lens and therefore its not possible to read or write these medias.
Usual its not possible to fix this and the drive replacement is needed.
You can also check the user manual. There you can find a list with all supported and compatible medias.
I have found also this topic in the forum:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13170&messageID=48243

Not fetching the records through DTP

Hi Gurus,
I am facing a problem while loading the data in to infocube through DTP.
I have successfully loaded the data till PSA but not able to load the records into infocube.
The request was successfully with status green but able to see only 0 records loaded.
later one of my friend executed the DTP successfully with all the records loaded.
can you please tell me why it is not working with my userid.
I have found the following difference in the monitor.
I am not able to see any selections for my request and ale to see REQUID = 871063 in the selection of the request started by my friend.
can any one tell me why that REQUID = 871063 is not displaying automatically when I have started the schedule.

Hi,
I guess the DTP update process is DELTA UPDATE mode. Because you and your friend/colleague have executed SAME DTP object with a small time gap and during the same period no new TRANSATIONS HAVE POSTED IN SOURCE.
-Try to execute after couple hours....
Regards

Equium M70-339: Playing video display freezes for second every 10sec

When I play a video/dvd etc the display sticks/freezes for a split second every 10 seconds or so. This happens when I play something online or from one of my own DVDs/CDs. It does it on all software (Windows Media, Real Player etc).
It seems to be a driver problem(?) but I can't be sure.
It is certainly very annoying! .. and seems to be getting more noticeable. Would appreciate any help as I can't find anything else on the web which explains why this happens.
thanks
Jim

The newly downloaded driver worked for a short time (I'm certain I have the correct one as it actually had a link on my PC to download the latest version) but is now back to the very annoying 'stick' every 10 seconds or so. I'm not sure what else I can do to fix this - it's very frustrating as it ruins enjoyment of videos, dvds and also watching internet tv, they all do the same. Any ideas?

I bought a Samson R10S microphone to use in garageband on my imac, and i can't seem to get it to record through the microphone, help?

Need help recording on Garageband with a mic I bought.

How are you connecting the mic to your iMac?
Is it a USB microphone or does it need an audio port? The newer iMacs don't have a line-in port, so you'll need an audio interface to turn a USB port into an audio port, eg., the iMic as the most simple solution:
See: Recording with iMic in GarageBand

Firefox problems, wants to load a profile, recording not possible

When I want to record a test using Firefox, the first step is loading profiles, althoght there is only one single profile available.
I confirm it but it is not possible to record the test.
Why not?
It is supposed to work with Firefox actually.
Now I really just wonder if there is worse tool than this available......
I guess not!

Your contribution unfortunately does not provide any details about firefox version, plugins and extensions used, the OS you are running etc. So I am playing by the ear and because you mention "playing a web page game" I suggest you check your plugins. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Trying to record through line in no wo

Hey, I am using a sound blaster li've sound card and want to record through the line in port on the back. I have bought a convertor which has allowed me to plug my guitar into the line in however when i play nothing comes out and my recording programs don't reconize the line in. Nothing is muted so that is not the problem. If anyone could help me out i would greatly appreciate it thanks.

yeah i have a similar problem when recording through my microphone. I like to play my little guitar, sing my little songs anre record them via microphone. I noticed, no sound. I had the volume turned down as to prevent the annoying "squuueeeeeeeeeel". but i noticed when i turn my speaker volume up, it records.. but then i get the occational "squeeeeeeeeel" hmm. i'm starting to notice, i'm having all sorts of problems with thsi card. lol

Trying to record through soundboard in Sound Studio?

Hi all-
I have been trying to record an audio clip into Sound Studio 2.2.4. The default is for the MacBook Pro to play the clip through the speakers and for Sound Studio to record through the microphone, in which case I can get good levels but the recording is echo-ey and bad. When I switch to the only other source option, Built-in Input, I get no signal or levels in Sound Studio at all.
Am I doing something foolish? Does SS not have this capacity? Or do Macs not use the soundboard the way a PC does? Any help would be appreciated!
Thanks,
Matthew

I have a very similar problem on my iMac. I've tried 3 sound programs and none of them can record internally, without having to resort to speakers out mic in. Each program has an option for internally recording but the problem appears to be my own sound preferences as they just list the mic, the line in and a blue tooth device called LAVINIA that I know nothing about!

Premiere Pro CS3 -"Recording audio is not possible"?

I am reinstalling Adobe Premiere Pro CS3 on a new computer but get the message "The currently installed soundcard driver does not support DirectSound Input. Recording audio is not possible". I have noted comments on similar sound problems elsewhere but have not seen anything that seems to solve this problem. Is the problem related to the change in windows environments from Vista to Windows 7 (on Dell i7 Alienware) or do I need to buy another Sound Card or is it Premiere Pro CS3 where the problem lies? With thanks, eirrom.

Yes, quite likely a compatibility issue. CS3 used an older compatibility model, which long has been surpassed by newer versions of DX. However, it still should be backward compatible, so any issues you may have may depend on requiriung a specific driver, installing the full legacy load of DirectX or as a minor, changing some permissions on teh system to allow loading of unsigned legacy drivers and/or compatibility modes. It's a more complex problem than just flipping a switch eitrher way. Check your device manager and then work your way through...
Mylenium

Is it possible to record data directly from PXI-5112 scope card through PXI bus to SCSI RAID array (connected to PXI-8210)?

Colleagues,
Is it possible to record data directly from PXI-5112 scope card through PXI bus to SCSI RAID array (connected to PXI-8210)?
Which will be the maximum transfer rate for continuous data recording?
Thank you,
Sergey
Sergey

Sergey,
The PXI-8210 can connect to any SCSI 2 compliant device. If the RAID controller is SCSI 2 and appears just like a hard drive in the operating system, then you can send data directly to the RAID array. The problem is that the driver for the PXI-5112 does not yet support continuous acquisition. The on-board 16MB or 32MB buffer stores the data until the entire acquisition is completed. Once the acquisition complete, all of the data is transferred from the on-board buffer to the hard drive. After that happens, the NI 5112 is ready for another acquisition.
Best Regards,
Jace Curtis
NI Applications Engineering

Timeline recording not possible

Hi there folks, I am having a problem getting timeline recording to work. I have a Matrox MX02 LE and a mic connected to one of the RCA connectors. All of the audio hardware and project settings, as well as the sequence preset are OK. When I enable a (timeline) track for recording and press the rec button to arm it, then press play I get the message:
The current player does not support timeline recording. Please change the player settings or use a different editing mode.
As you probably guessed, I tried every possible editing mode that is Matrox-proof and fiddled around with player settings/input/output stuff, but no matter what I try, I keep getting this message. Anyone of you ever had the same problem? It's becoming a major nuisance. Any suggestions?

Hello guys, Jim, Colin,
I just seem to have fixed the problem.... I noticed that after switching forth to the Sound Blaster inputs and back to the Matrox inputs again, I could all of a sudden press recording in the timeline WITHOUT the error screen, however the sound was not recorded any longer than a few samples, less than a second .....
So my guess was, that it really came down to a syncing problem... and yes, I tried a couple of Matrox settings again, but no different than yesterday. But then Matrox also has its own capture settings screen, where you define the right audio AND video inputs. Here lied the problem: video was still referring to SDI input but there was no such device connected. Switching to S-Video (which was connected) at first changed nothing, however, deliberately switching to a disconnected analog video input source (composite) and back to S-Video again solved the problem!
It's a bit of an unsatisfying way to "solve" a problem, but somehow this seemed to have worked.... anyway, thanks so much for your time and answers. I am really relieved that it wasn't a bug or actual shortcoming in software or hardware.
So cheers dear people! I hope that if anyone else ever bumps into this problem, this thread could be helpful...
Regards,
Tom

Cannot purchase records/"processing of credit card data not possible"

Since last Tuesday I cannot buy records at iTunes store (Austria). Whenever I click the "purchase" button the systems sends back the message that "currently the processing of credit card data is not possible".
That's interesting as I have been handling my purchases since months using a Click and Buy account without any problems.
The ITS support team did not yet answer to my request.
Any ideas how to fix? Thx!
Windows XP Pro

The security code is the 3 or 4 digit code outside of the actual card number (and NOT the same as your PIN). It is usually located on the front of AMEX cards and on the back of Visa and MC. You typically wouldn't need that for purchases in a physical store. Log into your AppleID, modify the payment method and set it with the proper code.

Recording at 96k with Line6 Toneport not possible with Audition??

Is anyone else out there using a Line 6 Toneport device to record in Audition? This is a 96k recording device but choosing "96k" is not possible in Audition. I just spoke to Line 6 support and they say it's the fault of Audition. They say I have to choose 96k within Audition but I don't have to do that with my other devices. I'm able to record at 96 using other devices no problem by choosing in in the device control panel. The Line6 Toneport control panel doesn't give 96k as an option.
So Line 6 tells me that it's impossible to record at 96k in Audition. Please tell me it isn't so???
Anyone got any help here?
thanks!

A slight departure from previous behavior is that Audition no longer automatically changes the sample rate of your device. There were too many problems when switching between different applications (e.g. between Premiere Pro and Audition, or Audition and Windows Media Player, etc) and the clock setting changing on the device, and then the device "freaking out" (to put it politely).
So, if there's software that came with Echo where you can change the clock settings, you might want to set it to 96 kHz there first, and then Audition CS5.5 should just go along with 96 kHz.

Equium M70-339 - not possible to record through internal microphone

Similar Messages

Maybe you are looking for