Equium P200: realtek ethernet adaptor error installing Linux

I have an old Equium P200 - 1Ed, which has started to play up.
When I try to install Linux, it gives me a realtek ethernet adaptor error, and I researched the problem on the forums.
Apparently my hard drive is old and decrepit.
I tried reinstalling Vista from the Toshiba default CD, just out of curiosity, and it installed fine, except, the internet seemed unwilling to connect.
Tried Linux again but still same realtek problem.
Apparently I can download the flash bios driver, and try reinstalling the bios....seems like my last hope.
Anyone know where I can get the bios driver for P200-1ED?

> When I try to install Linux, it gives me a realtek ethernet adaptor error, and I researched the problem on the forums.
Have you found some reasonable explanation on some Linux forum?
Be careful with BIOS update. It is windows based update and can be started under windows OS.
Best thing is if you use original Toshiba recovery image and start BIOS update. Be sure notebook is connected to AC power supply, all running applications closed and dont interrupt BIOS update.

Similar Messages

  • Equium P200-1ED - have problem with installing VGA driver

    Hello
    I have problem with installing vga video driver, each time in installion it stops on
    Version: 6,14.10,4833 and there is error poping up.........
    Please help!

    Hello
    What error message is it exactly?
    Make sure that the chipset driver and SP2 is installed at least.
    I had a similar issue that I cant install the display driver. The error message was something like the hardware is not supported
    But it was very easy to solve this problem. I installed the driver via device manager. I have selected the graphic card and choose update driver. Then I did choose the advanced installation to choose the directory by myself.
    Anyway, after restart the driver was installed and it worked. :)
    Greets

  • Equium P200-1ED Installing Windows XP Problem - SATA Drivers

    I have just bought a Toshiba Equium P200-1ED laptop with Vista installed and want to install my copy of Windows XP Pro. This is the latest disc with SP2 included.
    When I boot up it does not recognise the hard drive. I assume I need to download these drivers and load them onto a floppy and hit F6 when the windows setup screen prompts me to do so.
    Questions are;
    1) Where can I get these drivers from?
    2) Will the machine recognise a USB floppy Drive?
    3) Am I right about what I need to do?
    Thanks in advance for your help. :8}

    How to install XP Home on the following Vista laptop. 05/01/08
    Toshiba Equium A200-1V0 PSAF5E
    Introduction
    These are the steps taken by us to remove Vista from our Toshiba laptop and replace it with XP Home. There may be inconsistencies in our methods and we may not have all of the exact drivers installed, but everything appears to work OK for us.
    Our laptop now runs much faster, opens and closes faster and is more stable.
    This is not a 5 minute operation. It should not be attempted by anyone with only a passing knowledge of computers as it is very easy to screw things up. The shop you bought your PC from will charge a lot to fix things and they will probably insist on re-installing Vista!!.
    Be prepared that this will also probably invalidate your warranty.
    Luckily, I have a 2nd PC running XP that allows me to access the web. This is very useful as it means that while your Vista machine is 'broken' you can still search for help and download driver files. I also used my 2nd PC to create the modified XP installation CD mentioned further on.
    You must have access to the web via some PC or other to get the required drivers.
    Method
    Firstly, while you still have Vista on your laptop machine, download and run an interrogation program such as 'Belarc advisor' which will list all the drivers and software that are installed on your laptop. Print it out for future reference.This may be useful later when searching on the web for any drivers that may need updating.
    Now, make sure you have noted down all the required settings for your Internet connection.
    Also, backup any files that you may have placed on the hard drive as you will lose the lot including any emails and address books and web favourites etc.
    Unfortunately, the Toshiba disc that comes with this laptop does not appear to have any of the required drivers with it. Instead, I think that it relies on Vista keeping copies on your hard drive. This is not very bright as when the hard drive fails you have lost everything!
    This therefore means that you have to go on the web and search for all the required drivers to run XP successfully.
    Some we could not find, for example the Wireless network adapter, however this was no problem as once we had installed XP and connected to the web via the Ethernet cable to our Router we were able to run 'Update Driver' for each item missing.
    Go to 'Device Manager' via 'Control Panel' then 'System' then 'Hardware'. Then look for any yellow question marks for any problems. Right click and run 'Update Driver' for the hardware update wizard and allow the PC to look on the web 'this time only'.
    The ones we did this way were: Wireless adapter, Audio adapter.
    Unfortunately an original XP SP2 CD does not contain the required drivers for this laptop. Therefore when you boot the CD it will, after a few minutes of installing files, say that you have a hardware problem as there are no drives present.
    To rectify this, you will need to download the correct Intel ICH8M SATA AHCI Controller drivers. I couldn't find this on the Intel website, but instead searched on Google for it. and got it from: http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2101
    The other required drivers that we found on the web were:
    Intel chipset device software installer
    Web page
    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=816&DwnldID=14528 &strOSs=45&OSFullName=Windows* XP Home Edition&lang=eng
    Or if this link doesn't work try this:
    http://support.intel.com/support/chipsets/inf/sb/CS-021273.htm
    Select 'Download Intel chipset software installation utility' on the left hand side and select your operating system 'XP Home'
    Select 'INF Update Utility - primarily for Intel 3, 900 series chipsets'
    and download it.
    Intel graphics driver: Mobile Intel(R) 965 Express Chipset
    Web page
    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=2800&DwnldID=1438 8&strOSs=45&OSFullName=Windows*%20XP%20Home%20Edit ion&lang=eng
    Or if this link doesn't work try this:
    http://support.intel.com/support/graphics/intelgm965/
    Now select 'software and drivers' on the left hand side and select your operating system 'XP Home'
    You will be presented with a list of files.
    Select Intel® Graphics Media Accelerator Driver for Windows* XP (exe)
    and download it.
    Marvell Yukon Ethernet Driver
    Web page
    http://www.marvell.com/drivers/driverDisplay.do?dId=175
    Or if this link doesn't work try this:
    http://www.marvell.com/drivers/search.do?reload=false
    On the right hand side, select 'W2000/ XP/2003/Vista x86 & x64 Multi-Language Installer (32-bit and 64-bit) for Yukon Devices'
    Creating the XP Drivers disc
    Add the SATA drivers to a copy of your XP install CD using a program such as NLite.
    You will need enough spare hard drive memory to take a copy of your XP install CD (approx 700MB).
    Run the program 'sp37005.exe' and it will install to your hard drive. Don't install to a floppy.
    Download 'NLite' from: http://www.nliteos.com/download.html
    When you run NLite it will probably say that you need to install '.net Framework', if so, quit NLite and go and find the program. This is a Microsoft program that you can find by searching on Google for the relevant page on the Microsoft website.
    Now place your XP install disc in your CD drive, if it autoruns, exit it.
    Then run Nlite and follow on screen instructions.
    The program will ask where your XP disc is then it will ask where you want to save the copy.
    On the 'Task selection' screen select 'Drivers' and 'Bootable ISO'. then press 'Next'.
    Now select 'Insert' then 'Multiple Driver folder' and go and find your downloaded SATA driver files. Now select 'All' and 'OK. The program will list the available SATA drivers. Only select the two that mention 'ICH8M'. Now press 'Next'. The screen will show the selected drivers. Press 'Next' again and then 'Yes' to the prompt, and then 'Next' when done
    You are now presented with the 'Bootable ISO' screen.
    Put a new burnable CD in your CD writer, wait for it to be recognised and exit any window that might pop up to allow you to install files
    Now, in Nlite, under 'Mode' select 'Direct Burn'
    Under 'Label' enter something like ' XP for Toshiba Equium A200' to identify the disc.
    Leave Advanced settings alone and now add in the other required drivers by clicking explore and copying them to the root directory of the temporary XP directory on your hard disc. It might be best to create a 'Drivers' folder in the root directory to make them easy to find later.
    Now click the 'Burn' button. Now follow the rest of the instructions to complete.
    You have now created an XP install disc which contains your required SATA drivers.
    -As you can tell, this is quite convuluted but avoids you having to buy a USB floppy drive and it provides a neat solution.
    Hasta La Vista!!
    Now you are ready to begin the cleansing process, if you are brave enough to continue....
    Firstly, re-boot your laptop and while booting press F12 to change the boot order so that the DVD/CD ROM is first. Alternatively use F2 and then change the Boot order from there.
    Now insert your new XP install disc in the DVD/CD drive and re-boot the PC, selecting boot from CD when prompted.
    The XP CD will now start copying files and eventually will display an options screen
    Select to install Windows.
    Then delete the C: hard drive partition (with Vista on)
    Delete the F drive partition used by Vista also.
    You will have to follow lots of warning prompts to delete the partitions.
    Now follow the instructions to create an NTFS partition on the C drive.
    Now install XP as instructed.
    Don't worry that the graphics are a bit chunky as once Windows has finished installing you can run the graphics driver you copied to the the XP CD to correct this.
    Run the three driver files:
    win2k_xp14311.exe Intel graphics driver
    infinst_autol.exe Intel chipset software installation utility'
    setup.exe Marvell Yukon Ethernet Driver
    Your graphics should now improve and you should now be able to connect to the web (after running the web setup wizard). But don't do this until you have installed your Antivirus and Firewall software.
    Now go to 'Device Manager' via 'Control Panel' then 'System' then 'Hardware'. Then look for any yellow question marks for any problems. Right click and run 'Update Driver' for the hardware update wizard and allow the PC to look on the web 'this time only'.
    Hopefully, everything should now run OK.
    Now go and have a drink to celebrate!

  • How to install Win XP on Equium P200

    Hi guys,
    I found a very usefull tutorial how to install windows xp onto Equium P200 laptop.
    Problem is that when I have done everything whats in that tutorial (used nlite, made xp install cd with sata drivers) Win Xp is showing error.
    When u boot from cd, and all the drivers are loaded it will show me a blue screen saying that the installation was stopped to prevent damage to my pc, and its saying that the error is in file pci.sys ...
    Any ides what it could be?
    Thanks in advance

    Hi
    Im not 100% sure why this error appears but Ive got one idea.
    Possibly the installed Intel Matrix Storage Manger doesnt support the right chipset.
    Ive tow different Intel Matrix Storage Manger versions and both versions support different chipsets.
    Fact is that different Equium P200 series exist which needs different drivers.
    I think you should visit the Toshiba European driver page and should choose the right notebook series! Please compare the series number which can be found at the bottom of the unit!!!
    Then try the installation again!

  • How to install Vista Service Pack 1 - Equium P200

    have now tried loads of times to install sp1 update. this on Equium P200. update sticks in loop and finally reverts to old settings.tried installinfrom disc. this did same, but came up with error code 0x800f0826. the link this took me to microsoft siteand just gave same things to try as before.
    Searched for fault code, not found. can anyone in very easy terms tell me what this code is and then in simple steps how to install sp1 update. i have been using autoupdate and when checked maually, the only update that has not been installed is sp1.

    Try to download the sp1 manually from microsoft.com
    After you did this, use a windows account which has admin rights to install the service pack.

  • Installing RealTek ethernet card in solaris 7 sparc machine

    I inserted RealTek ethernet card in my Solaris-7 Sparc machine. But to work it properly ,need to install driver for the card. I searched a lot but i did't get the driver to download . I have read from some sites that the driver for solaris 7 sparc is not avaliable.How can i solve this problem.?
    Anybody please help me to solve the problem.

    You can try a NIC driver from RealTek, directly.
    http://www.realtek.com.tw/downloads/
    ... but for a SPARC system? That may be problematic.
    Does OBP see the device? Use show-devs at the OK prompt.
    If it isn't seen at OBP's elementary hardware level, the OS will never use it.
    If it is recognized at OBP, then try the manufacturer's drivers.
    Return to the forum and let the rest of us know what happens..

  • Hello, I am trying to upgrade to yosemite, but I get the "disk cannot be used to startup your computer" error. Resizing the partition does not work, I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot

    Hello, I am trying to upgrade my macbook pro to yosemite, but I get the "disk cannot be used to startup your computer" error.
    Resizing the partition does not work for me and I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot and the disk manager is lost.
    Anyway to tell the yosemite installer that it should not pay attention whether the disk is bootable or not ?
    If I am doomed, any way to delete the installer and downloaded OS from my hard drive ?
    Thanks for your help

    As usual, the Linux installer wrecked the partition table. You would have to boot from your OS X installation disc and repartition. Doing so will of course remove all data from the drive, so you must back up first if you haven't already done so.

  • Ora-12560 while installing 10g standard edition tns protocol adaptor error

    hi all ,
    while i am installing oracle database standard edition on my windows xp , i got this error
    ora-12560 tns protocol adaptor error , when i got to the step of
    configuration assistants .
    -oracle net configuration assistant succeeded , but
    oracle database configuration assistant failed unfortunately !!
    please help me rapidly , i left the installer on that step until you answer me ,
    thanks in advance

    semsem wrote:
    hi all ,
    while i am installing oracle database standard edition on my windows xp , i got this error
    ora-12560 tns protocol adaptor error , when i got to the step of
    configuration assistants .
    -oracle net configuration assistant succeeded , but
    oracle database configuration assistant failed unfortunately !!
    please help me rapidly , i left the installer on that step until you answer me ,
    thanks in advance1) V10 is obsoleted & unsupported
    2) I bet that you did not follow Installation Guide & complete all prerequisites.
    3) SQL*Net is not required to manage, start, or use local Oracle DB

  • USB ADSL Modem fails to install on Equium P200-1ED

    I have a Toshiba Equium P200-1ED; Model Number# PSPB5E-003004KS.
    I wish to use my Thomson SpeedTouch 330 - a USB bus powered USB ADSL modem - to my Toshiba Equium P200-1ED and have downloaded Release 4.1 of the Windows Vista driver from this web-page:
    http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=471
    ... however when the Vista modem driver is executed, the software fails to recognise the Thomson SpeedTouch 330 ADSL modem when the driver software prompts me to connect the modem.
    The Thomson SpeedTouch 330 ADSL modem works perfectly when used with my old Toshiba/XP laptop (which was how I downloaded the Vista driver for the modem for the Equium).
    What is wrong?

    Problem Solved!
    Un-installing all USB modem device drivers, disconnecting all USB devices and removing all USB host controllers and hubs from the Vista device manager and then rebooting the notebook MADE NO DIFFERENCE.
    However when I received the new Thomson SpeedTouch 330 USB ADSL modem drivers on CD-ROM from the manufacturer the modem installed immediately.
    I can only assume that there is a problem with the download of Release 4.1 of the Windows Vista driver for the SpeedTouch 330 from this web-page:
    http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=471
    ... as the drivers on the CD-ROM from Thomson work - but their web download of the driver for the SpeedTouch does not.
    The problem was with the driver for Windows Vista - the laptop and modem now work correctly - as they should have done at the first installation attempt!
    Thanks for your help.

  • Equium P200-1IR - Adaptor for a lorry

    I have an Equium P200-1IR.
    I'm looking for an adaptor that I can use is a lorry..Can anyone tell me where I can get one?

    Hello
    On the Toshiba website you can search for Accessories and Peripherals:
    http://eu.computers.toshiba-europe.com => Peripherals & Services => PC Options & Accessories => PC Options & Accessories Home Page
    There you should find such an adaptor if there is one available for this.
    With the part number you can search on Google to find some online shops where you can buy it.
    Or you ask the local authorized service provider. They can order all original Toshiba parts.
    Greets

  • Ideacenter k450 - Error 1962 after installing Linux

    After installing Linux (Fedora 19) I get the error 1962 when trying to boot.
    - Secure Boot is off
    - CSM (Compatibility Support Module) is enabled (boot mode auto, EUFI first)
    - OS Optimized Defaults (disable)
    I googled a lot, found lots of solutions ( none of them work 100%)
    I got grub working once, dunno anymore what I did, but then I could only boot Linux, when trying to boot Windows
    I got the error:
    boot\bcd 0xc0000225
    I googled for a solution to that problem. but none of the found solutions work...

    I fixed it.
    The solution is to install Fedora(linux) from DVD in EUFI modus, you do this by creating an EUFI boot usb stick and boot from that, and then continue installing from the install DVD.
    This way Fedora will install grub-efi correctly and not install a regular grub which will not work in EUFI mode or some misformed grub-efi.

  • I have heard that if I load WIN8 on my PC,the Network Ethernet adaptor driver will need updating?

    My PC is a Presario CQ5302,I have WIN 8 installed,failure to connect to Internet produces error message from Windows informing me there is a problem with Ethernet adaptor,it then asks if it should fix problem,after agreeing it does this and all is OK until the next time I switch on,I then have to repeat all over agin !!
    Is HP likely to upgrade the driver for this unit anytime soon?
    This question was solved.
    View Solution.

    Hi:
    I just checked the Realtek site and they don't have any windows 8 drivers for the network adapter that is in your PC released  yet.
    My understanding is that no drivers will be available until October 26th at the earliest, which is the date that Windows 8 will be available for sale.
    You may want to see if the Realtek W7 driver works better for you as it is probably newer than the one you have.
    4th one down on the list is the auto-install file.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
    Paul

  • Realtek ethernet initialization slow [SOLVED]

    Hello!
    I am having problems with my ethernet controller (Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller) taking 40-60 seconds to get a network connection.
    I am using netcfg 2.6.8-1 and have enabled net-auto-wired in my DAEMONS array:
    DAEMONS=(syslog-ng crond dbus net-auto-wired net-auto-wireless !ntpd cupsd netfs mpd)
    Here is my netcfg profile:
    CONNECTION='ethernet'
    DESCRIPTION='Ethernet connection at home'
    INTERFACE='eth0'
    IP='dhcp'
    ## for DHCPv6
    #IP6='dhcp'
    ## for IPv6 autoconfiguration
    #IP6='stateless
    This is the output from lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
    02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    09:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    09:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    This is the output from dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
    [ 0.000000] Command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
    [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv9700 Notebook PC /30CB, BIOS F.59 11/25/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D7FFF write-protect
    [ 0.000000] D8000-DBFFF uncachable
    [ 0.000000] DC000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [ffff8800000f8520] f8520
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
    [ 0.000000] 0000000000 - 00bfe00000 page 2M
    [ 0.000000] 00bfe00000 - 00bfed0000 page 4k
    [ 0.000000] kernel direct mapping tables up to bfed0000 @ bfecb000-bfed0000
    [ 0.000000] RAMDISK: 37dca000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP )
    [ 0.000000] ACPI: XSDT 00000000bfed5bdd 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000bfedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000bfed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
    [ 0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: TMOR 00000000bfedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
    [ 0.000000] ACPI: APIC 00000000bfedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 00000000bfed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed61e5 0025F (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed613f 000A6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed5c59 004E6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-00000000bfed0000
    [ 0.000000] Initmem setup node 0 0000000000000000-00000000bfed0000
    [ 0.000000] NODE_DATA [00000000bfec6000 - 00000000bfecafff]
    [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000bfed0
    [ 0.000000] On node 0 totalpages: 786015
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10692 pages used for memmap
    [ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78464 r8192 d23936 u1048576
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775262
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3088932k/3144512k available (4066k kernel code, 452k absent, 55128k reserved, 3302k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 25165824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1828.793 MHz processor.
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.98 BogoMIPS (lpj=6095976)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003483] Security Framework initialized
    [ 0.003491] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.009911] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011485] Mount-cache hash table entries: 256
    [ 0.012020] Initializing cgroup subsys cpuacct
    [ 0.012063] Initializing cgroup subsys memory
    [ 0.012087] Initializing cgroup subsys devices
    [ 0.012090] Initializing cgroup subsys freezer
    [ 0.012092] Initializing cgroup subsys net_cls
    [ 0.012095] Initializing cgroup subsys blkio
    [ 0.012163] CPU: Physical Processor ID: 0
    [ 0.012165] CPU: Processor Core ID: 0
    [ 0.012168] mce: CPU supports 6 MCE banks
    [ 0.012178] CPU0: Thermal monitoring enabled (TM2)
    [ 0.012185] using mwait in idle threads.
    [ 0.013589] ACPI: Core revision 20110413
    [ 0.020015] ftrace: allocating 16144 entries in 64 pages
    [ 0.023754] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059353] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
    [ 0.059996] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.059996] PEBS disabled due to CPU errata.
    [ 0.059996] ... version: 2
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 2
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 000000007fffffff
    [ 0.059996] ... fixed-purpose events: 3
    [ 0.059996] ... event mask: 0000000700000003
    [ 0.076788] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.103342] Booting Node 0, Processors #1 Ok.
    [ 0.103346] smpboot cpu 1: start_ip = 9a000
    [ 0.200020] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206659] Brought up 2 CPUs
    [ 0.206662] Total of 2 processors activated (7318.31 BogoMIPS).
    [ 0.207867] devtmpfs: initialized
    [ 0.208097] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
    [ 0.210342] print_constraints: dummy:
    [ 0.210439] NET: Registered protocol family 16
    [ 0.210574] ACPI: bus type pci registered
    [ 0.210759] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.210763] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.251674] PCI: Using configuration type 1 for base access
    [ 0.252194] bio: create slab <bio-0> at 0
    [ 0.254077] ACPI: EC: Look up EC in DSDT
    [ 0.254256] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
    [ 0.254264] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8800bae32a78), AE_NOT_FOUND (20110413/psparse-536)
    [ 0.256623] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.257710] ACPI: SSDT 00000000bfed6aa1 001F6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.258077] ACPI: Dynamic OEM Table Load:
    [ 0.258081] ACPI: SSDT (null) 001F6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.258208] ACPI: SSDT 00000000bfed6444 005D8 (v01 HP 30CB 00003001 INTL 20061109)
    [ 0.258557] ACPI: Dynamic OEM Table Load:
    [ 0.258561] ACPI: SSDT (null) 005D8 (v01 HP 30CB 00003001 INTL 20061109)
    [ 0.258784] ACPI: SSDT 00000000bfed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259142] ACPI: Dynamic OEM Table Load:
    [ 0.259146] ACPI: SSDT (null) 000C8 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259233] ACPI: SSDT 00000000bfed6a1c 00085 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259584] ACPI: Dynamic OEM Table Load:
    [ 0.259587] ACPI: SSDT (null) 00085 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259886] ACPI: Interpreter enabled
    [ 0.259890] ACPI: (supports S0 S3 S4 S5)
    [ 0.259911] ACPI: Using IOAPIC for interrupt routing
    [ 0.267408] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.267597] ACPI: No dock devices found.
    [ 0.267599] HEST: Table not found.
    [ 0.267603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.267938] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.268586] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.268590] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.268593] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.268597] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.268600] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.268603] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.268606] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [ 0.268609] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [ 0.268629] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [ 0.268683] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
    [ 0.268726] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.268730] pci 0000:00:01.0: PME# disabled
    [ 0.268789] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.268853] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
    [ 0.268899] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.268964] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
    [ 0.269028] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.269055] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
    [ 0.269154] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.269161] pci 0000:00:1a.7: PME# disabled
    [ 0.269192] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.269218] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
    [ 0.269311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.269317] pci 0000:00:1b.0: PME# disabled
    [ 0.269348] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.269445] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.269450] pci 0000:00:1c.0: PME# disabled
    [ 0.269484] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [ 0.269580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.269585] pci 0000:00:1c.1: PME# disabled
    [ 0.269624] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [ 0.269720] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.269726] pci 0000:00:1c.5: PME# disabled
    [ 0.269759] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.269822] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
    [ 0.269867] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.269931] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
    [ 0.270004] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.270068] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
    [ 0.270130] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.270157] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
    [ 0.270257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.270263] pci 0000:00:1d.7: PME# disabled
    [ 0.270290] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.270386] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [ 0.270498] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.270505] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.270514] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
    [ 0.270559] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [ 0.270578] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.270591] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.270605] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.270618] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.270632] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
    [ 0.270689] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [ 0.270719] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
    [ 0.270732] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
    [ 0.270746] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
    [ 0.270760] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
    [ 0.270773] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.270787] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
    [ 0.270841] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.270847] pci 0000:00:1f.2: PME# disabled
    [ 0.270870] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [ 0.270889] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    [ 0.270936] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    [ 0.271034] pci 0000:01:00.0: [10de:0425] type 0 class 0x000300
    [ 0.271055] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
    [ 0.271078] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.271102] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
    [ 0.271118] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    [ 0.271134] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.271221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.271225] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.271229] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
    [ 0.271234] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.271401] pci 0000:02:00.0: [8086:4222] type 0 class 0x000280
    [ 0.271458] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4000fff]
    [ 0.271795] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.271808] pci 0000:02:00.0: PME# disabled
    [ 0.271878] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.271917] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    [ 0.271922] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
    [ 0.271928] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
    [ 0.271938] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.272006] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
    [ 0.272012] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
    [ 0.272018] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
    [ 0.272027] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.272128] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.272154] pci 0000:08:00.0: reg 10: [io 0xc000-0xc0ff]
    [ 0.272198] pci 0000:08:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit]
    [ 0.272250] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.272315] pci 0000:08:00.0: supports D1 D2
    [ 0.272318] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.272325] pci 0000:08:00.0: PME# disabled
    [ 0.272354] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.272367] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    [ 0.272373] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.272379] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    [ 0.272388] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.272454] pci 0000:09:09.0: [1180:0832] type 0 class 0x000c00
    [ 0.272472] pci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
    [ 0.272474] pci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
    [ 0.272492] pci 0000:09:09.0: reg 10: [mem 0xf8100000-0xf81007ff]
    [ 0.272587] pci 0000:09:09.0: supports D1 D2
    [ 0.272589] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272595] pci 0000:09:09.0: PME# disabled
    [ 0.272619] pci 0000:09:09.1: [1180:0822] type 0 class 0x000805
    [ 0.272642] pci 0000:09:09.1: reg 10: [mem 0xf8100800-0xf81008ff]
    [ 0.272735] pci 0000:09:09.1: supports D1 D2
    [ 0.272737] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272744] pci 0000:09:09.1: PME# disabled
    [ 0.272767] pci 0000:09:09.2: [1180:0592] type 0 class 0x000880
    [ 0.272791] pci 0000:09:09.2: reg 10: [mem 0xf8101000-0xf81010ff]
    [ 0.272884] pci 0000:09:09.2: supports D1 D2
    [ 0.272886] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272892] pci 0000:09:09.2: PME# disabled
    [ 0.272915] pci 0000:09:09.3: [1180:0852] type 0 class 0x000880
    [ 0.272938] pci 0000:09:09.3: reg 10: [mem 0xf8101400-0xf81014ff]
    [ 0.273031] pci 0000:09:09.3: supports D1 D2
    [ 0.273033] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.273039] pci 0000:09:09.3: PME# disabled
    [ 0.273095] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
    [ 0.273101] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.273107] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    [ 0.273116] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.273120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.273123] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.273126] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.273129] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.273132] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.273135] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.273139] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.273142] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.273177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.273305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 0.273370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.273416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.273457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.273521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 0.273569] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.273573] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.273575] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.278401] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.278457] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278510] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.278561] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278613] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.278665] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.278715] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.278767] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278887] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.278894] vgaarb: loaded
    [ 0.278896] vgaarb: bridge control possible 0000:01:00.0
    [ 0.279005] PCI: Using ACPI for IRQ routing
    [ 0.291398] PCI: pci_cache_line_size set to 64 bytes
    [ 0.291537] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.291540] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
    [ 0.291700] NetLabel: Initializing
    [ 0.291703] NetLabel: domain hash size = 128
    [ 0.291705] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.291722] NetLabel: unlabeled traffic allowed by default
    [ 0.291738] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.291744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.291750] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.303337] Switching to clocksource hpet
    [ 0.306534] Switched to NOHz mode on CPU #0
    [ 0.306616] Switched to NOHz mode on CPU #1
    [ 0.311449] pnp: PnP ACPI init
    [ 0.311470] ACPI: bus type pnp registered
    [ 0.312253] pnp 00:00: [bus 00-ff]
    [ 0.312257] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.312259] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.312262] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.312265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.312267] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.312270] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.312272] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.312275] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.312277] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.312280] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.312282] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.312285] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.312287] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.312290] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.312292] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.312295] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.312298] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.312300] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 0.312303] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.312306] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.312393] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.312475] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.312478] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.312481] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.312483] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.312485] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.312492] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.312494] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.312497] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.312583] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.312587] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.312590] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.312594] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.312597] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.312600] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.312603] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.312607] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.312611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.312836] pnp 00:02: [io 0x0000-0x001f]
    [ 0.312838] pnp 00:02: [io 0x0081-0x0091]
    [ 0.312841] pnp 00:02: [io 0x0093-0x009f]
    [ 0.312843] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.312845] pnp 00:02: [dma 4]
    [ 0.312895] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.312909] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 0.312961] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.313035] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.313108] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.313112] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.313126] pnp 00:05: [io 0x00f0]
    [ 0.313138] pnp 00:05: [irq 13]
    [ 0.313188] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.313201] pnp 00:06: [io 0x002e-0x002f]
    [ 0.313203] pnp 00:06: [io 0x004e-0x004f]
    [ 0.313205] pnp 00:06: [io 0x0061]
    [ 0.313208] pnp 00:06: [io 0x0063]
    [ 0.313210] pnp 00:06: [io 0x0065]
    [ 0.313212] pnp 00:06: [io 0x0067]
    [ 0.313214] pnp 00:06: [io 0x0080]
    [ 0.313216] pnp 00:06: [io 0x0092]
    [ 0.313218] pnp 00:06: [io 0x00b2-0x00b3]
    [ 0.313220] pnp 00:06: [io 0x0380-0x0383]
    [ 0.313222] pnp 00:06: [io 0x0680-0x069f]
    [ 0.313224] pnp 00:06: [io 0x0800-0x080f]
    [ 0.313226] pnp 00:06: [io 0x1000-0x107f]
    [ 0.313229] pnp 00:06: [io 0x1180-0x11bf]
    [ 0.313231] pnp 00:06: [io 0x1640-0x164f]
    [ 0.313233] pnp 00:06: [io 0xfe00]
    [ 0.313323] system 00:06: [io 0x0380-0x0383] has been reserved
    [ 0.313327] system 00:06: [io 0x0680-0x069f] has been reserved
    [ 0.313330] system 00:06: [io 0x0800-0x080f] has been reserved
    [ 0.313348] system 00:06: [io 0x1000-0x107f] has been reserved
    [ 0.313351] system 00:06: [io 0x1180-0x11bf] has been reserved
    [ 0.313354] system 00:06: [io 0x1640-0x164f] has been reserved
    [ 0.313357] system 00:06: [io 0xfe00] has been reserved
    [ 0.313361] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.313386] pnp 00:07: [io 0x06a0-0x06af]
    [ 0.313389] pnp 00:07: [io 0x06b0-0x06ff]
    [ 0.313460] system 00:07: [io 0x06a0-0x06af] has been reserved
    [ 0.313464] system 00:07: [io 0x06b0-0x06ff] has been reserved
    [ 0.313467] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.313478] pnp 00:08: [io 0x0070-0x0077]
    [ 0.313485] pnp 00:08: [irq 8]
    [ 0.313539] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.313607] pnp 00:09: [io 0x0060]
    [ 0.313609] pnp 00:09: [io 0x0064]
    [ 0.313615] pnp 00:09: [irq 1]
    [ 0.313673] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.313688] pnp 00:0a: [irq 12]
    [ 0.313750] pnp 00:0a: Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active)
    [ 0.313774] pnp: PnP ACPI: found 11 devices
    [ 0.313776] ACPI: ACPI bus type pnp unregistered
    [ 0.320373] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.320432] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
    [ 0.320436] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0100000-0xc01000ff]
    [ 0.320444] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0100000-0xc01000ff] (PCI address [0xc0100000-0xc01000ff])
    [ 0.320450] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
    [ 0.320453] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.320456] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.320461] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
    [ 0.320466] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.320472] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    [ 0.320476] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
    [ 0.320483] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
    [ 0.320489] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.320498] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
    [ 0.320502] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
    [ 0.320510] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
    [ 0.320516] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.320526] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
    [ 0.320529] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    [ 0.320533] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.320540] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    [ 0.320546] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc00fffff pref]
    [ 0.320556] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
    [ 0.320558] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.320565] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    [ 0.320571] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.320591] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.320596] pci 0000:00:01.0: setting latency timer to 64
    [ 0.320607] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.320613] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.320621] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.320627] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.320635] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.320641] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.320650] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.320655] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.320658] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.320660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.320663] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.320666] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.320669] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.320672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
    [ 0.320674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.320677] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.320680] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
    [ 0.320683] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.320686] pci_bus 0000:02: resource 0 [io 0x4000-0x7fff]
    [ 0.320689] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
    [ 0.320692] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.320695] pci_bus 0000:04: resource 0 [io 0x8000-0xbfff]
    [ 0.320697] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
    [ 0.320700] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.320704] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
    [ 0.320706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
    [ 0.320709] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc00fffff pref]
    [ 0.320712] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff]
    [ 0.320715] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
    [ 0.320718] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
    [ 0.320720] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.320723] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.320726] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.320728] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.320731] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff]
    [ 0.320734] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.320830] NET: Registered protocol family 2
    [ 0.321074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.322679] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.328896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.329687] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.329690] TCP reno registered
    [ 0.329704] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.329768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.330176] NET: Registered protocol family 1
    [ 0.330392] pci 0000:01:00.0: Boot video device
    [ 0.330419] PCI: CLS 64 bytes, default 64
    [ 0.330488] Unpacking initramfs...
    [ 0.369353] Freeing initrd memory: 2200k freed
    [ 0.370476] Simple Boot Flag at 0x35 set to 0x1
    [ 0.370972] audit: initializing netlink socket (disabled)
    [ 0.370988] type=2000 audit(1320586961.369:1): initialized
    [ 0.380802] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.401147] VFS: Disk quotas dquot_6.5.2
    [ 0.401325] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.401521] msgmni has been set to 6037
    [ 0.401788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.401833] io scheduler noop registered
    [ 0.401836] io scheduler deadline registered
    [ 0.401898] io scheduler cfq registered (default)
    [ 0.402034] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.402072] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.402134] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.402193] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.402283] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.402342] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.402432] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.402491] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    [ 0.402686] intel_idle: MWAIT substates: 0x22220
    [ 0.402689] intel_idle: does not run on family 6 model 15
    [ 0.402694] ERST: Table is not found!
    [ 0.402765] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.603627] Linux agpgart interface v0.103
    [ 0.603727] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.625005] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.625045] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.625141] mousedev: PS/2 mouse device common for all mice
    [ 0.627290] rtc_cmos 00:08: RTC can wake from S4
    [ 0.627416] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 0.627450] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.627461] cpuidle: using governor ladder
    [ 0.627463] cpuidle: using governor menu
    [ 0.627728] TCP cubic registered
    [ 0.627731] NET: Registered protocol family 17
    [ 0.627740] Registering the dns_resolver key type
    [ 0.627861] PM: Hibernation image not present or could not be loaded.
    [ 0.627867] registered taskstats version 1
    [ 0.637491] rtc_cmos 00:08: setting system clock to 2011-11-06 13:42:42 UTC (1320586962)
    [ 0.637554] Initializing network drop monitor service
    [ 0.639163] Freeing unused kernel memory: 712k freed
    [ 0.639370] Write protecting the kernel read-only data: 6144k
    [ 0.639542] Freeing unused kernel memory: 12k freed
    [ 0.642762] Freeing unused kernel memory: 776k freed
    [ 0.652005] udevd[37]: starting version 174
    [ 0.661005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.712421] usbcore: registered new interface driver usbfs
    [ 0.712452] usbcore: registered new interface driver hub
    [ 0.712861] usbcore: registered new device driver usb
    [ 0.714129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.714176] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.714199] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.714204] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.714256] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.714293] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.721629] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 0.721658] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
    [ 0.733414] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.733616] hub 1-0:1.0: USB hub found
    [ 0.733621] hub 1-0:1.0: 4 ports detected
    [ 0.733740] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.733767] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.733772] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.733928] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.733968] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.740812] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 0.740839] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
    [ 0.756276] SCSI subsystem initialized
    [ 0.763405] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.763606] hub 2-0:1.0: USB hub found
    [ 0.763612] hub 2-0:1.0: 6 ports detected
    [ 0.766819] libata version 3.00 loaded.
    [ 0.768867] ahci 0000:00:1f.2: version 3.0
    [ 0.768891] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.768950] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 0.769022] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    [ 0.769027] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
    [ 0.769033] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.769769] scsi0 : ahci
    [ 0.770124] scsi1 : ahci
    [ 0.770204] scsi2 : ahci
    [ 0.770347] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44
    [ 0.770352] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44
    [ 0.770355] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44
    [ 0.780764] ata_piix 0000:00:1f.1: version 2.13
    [ 0.780782] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 0.780828] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 0.781218] scsi3 : ata_piix
    [ 0.781306] scsi4 : ata_piix
    [ 0.781726] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
    [ 0.781729] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
    [ 0.857333] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.857390] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.857402] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.857407] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.857423] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.857475] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    [ 0.857662] hub 3-0:1.0: USB hub found
    [ 0.857667] hub 3-0:1.0: 2 ports detected
    [ 0.857769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.857777] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.857781] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.857790] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.857833] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    [ 0.857993] hub 4-0:1.0: USB hub found
    [ 0.857998] hub 4-0:1.0: 2 ports detected
    [ 0.858094] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.858102] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.858106] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.858116] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.858154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
    [ 0.858306] hub 5-0:1.0: USB hub found
    [ 0.858311] hub 5-0:1.0: 2 ports detected
    [ 0.858396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.858406] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.858411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.858429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.858475] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
    [ 0.858621] hub 6-0:1.0: USB hub found
    [ 0.858625] hub 6-0:1.0: 2 ports detected
    [ 0.858708] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.858715] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.858720] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.858728] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.858762] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
    [ 0.858914] hub 7-0:1.0: USB hub found
    [ 0.858919] hub 7-0:1.0: 2 ports detected
    [ 0.950398] ata4.00: ATAPI: Optiarc BD ROM BC-5500A, 1.86, max MWDMA2
    [ 0.963614] ata4.00: configured for MWDMA2
    [ 1.090033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.090057] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.090090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.090919] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.090924] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
    [ 1.090928] ata1.00: 488397168 sectors, multi 16: LBA48
    [ 1.091030] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.091035] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
    [ 1.091038] ata3.00: 488397168 sectors, multi 16: LBA48
    [ 1.091928] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.091933] ata1.00: configured for UDMA/100
    [ 1.092038] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.092044] ata3.00: configured for UDMA/100
    [ 1.092136] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
    [ 1.092469] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
    [ 1.093620] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.86 PQ: 0 ANSI: 5
    [ 1.102218] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.102259] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.102284] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.102288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.102315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.102321] sd 2:0:0:0: [sdb] Write Protect is off
    [ 1.102325] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.102350] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.103373] usb 2-2: new high speed USB device number 2 using ehci_hcd
    [ 1.104870] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.104875] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.105203] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 1.127901] sdb: sdb1
    [ 1.128208] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 1.135068] sda: sda1 sda2 sda3
    [ 1.135397] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.343378] usb 2-4: new high speed USB device number 3 using ehci_hcd
    [ 1.373352] Refined TSC clocksource calibration: 1828.949 MHz.
    [ 1.373358] Switching to clocksource tsc
    [ 1.541611] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.586684] usb 4-2: new low speed USB device number 2 using uhci_hcd
    [ 3.620978] udevd[241]: starting version 174
    [ 3.860528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 3.860538] ACPI: Power Button [PWRB]
    [ 3.860977] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 3.860983] ACPI: Sleep Button [SLPB]
    [ 3.862532] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 3.863014] ACPI: Lid Switch [LID]
    [ 3.864840] ACPI: AC Adapter [ACAD] (on-line)
    [ 3.865293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 3.865301] ACPI: Power Button [PWRF]
    [ 3.954841] ACPI: acpi_idle registered with cpuidle
    [ 3.958941] Monitor-Mwait will be used to enter C-1 state
    [ 3.959002] Monitor-Mwait will be used to enter C-2 state
    [ 3.959024] [Firmware Bug]: Invalid critical threshold (0)
    [ 3.959341] Monitor-Mwait will be used to enter C-3 state
    [ 3.959379] Marking TSC unstable due to TSC halts in idle
    [ 3.960679] Switching to clocksource hpet
    [ 3.961405] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.961408] ACPI: Thermal Zone [THR1] (49 C)
    [ 3.964908] acpi device:05: registered as cooling_device1
    [ 3.965003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
    [ 3.965627] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 3.979488] r592 0000:09:09.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 3.979831] r592: driver successfully loaded
    [ 4.034101] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.114730] iTCO_vendor_support: vendor-support=0
    [ 4.188196] wmi: Mapper loaded
    [ 4.223279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 4.223440] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    [ 4.224124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.283008] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 4.327775] sdhci: Secure Digital Host Controller Interface driver
    [ 4.327778] sdhci: Copyright(c) Pierre Ossman
    [ 4.337983] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
    [ 4.338003] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 4.339134] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 4.339152] _regulator_get: 0000:09:09.1 supply vmmc not found, using dummy regulator
    [ 4.340202] Registered led device: mmc0::
    [ 4.341284] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
    [ 4.341896] firewire_ohci 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 4.348208] [drm] Initialized drm 1.1.0 20060810
    [ 4.374187] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input6
    [ 4.374312] generic-usb 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:1a.1-2/input0
    [ 4.374333] usbcore: registered new interface driver usbhid
    [ 4.374336] usbhid: USB HID core driver
    [ 4.394502] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.394529] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.394593] r8169 0000:08:00.0: setting latency timer to 64
    [ 4.394688] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
    [ 4.394951] r8169 0000:08:00.0: eth0: RTL8168b/8111b at 0xffffc900115c0000, 00:1e:68:22:0d:d6, XID 18000000 IRQ 45
    [ 4.400195] firewire_ohci: Added fw-ohci device 0000:09:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 4.420843] Initializing USB Mass Storage driver...
    [ 4.420973] scsi5 : usb-storage 2-2:1.0
    [ 4.421105] usbcore: registered new interface driver usb-storage
    [ 4.421107] USB Mass Storage support registered.
    [ 4.429004] input: HP WMI hotkeys as /devices/virtual/input/input7
    [ 4.438830] Linux media interface: v0.10
    [ 4.439547] usbcore: registered new interface driver uas
    [ 4.441419] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.472037] Linux video capture interface: v2.00
    [ 4.486614] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
    [ 4.492079] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
    [ 4.492141] usbcore: registered new interface driver uvcvideo
    [ 4.492144] USB Video Class driver (v1.1.0)
    [ 4.629028] nouveau 0000:01:00.0: power state changed by ACPI to D0
    [ 4.629035] nouveau 0000:01:00.0: power state changed by ACPI to D0
    [ 4.629046] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.629054] nouveau 0000:01:00.0: setting latency timer to 64
    [ 4.631355] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
    [ 4.638843] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    [ 4.660115] r852 0000:09:09.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 4.663396] r852: Non dma capable device detected, dma disabled
    [ 4.663425] r852: driver loaded successfully
    [ 4.728189] [drm] nouveau 0000:01:00.0: ... appears to be valid
    [ 4.728195] [drm] nouveau 0000:01:00.0: BIT BIOS found
    [ 4.728198] [drm] nouveau 0000:01:00.0: Bios version 60.86.4f.00
    [ 4.728203] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    [ 4.728205] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
    [ 4.728208] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    [ 4.728212] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00000034
    [ 4.728215] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
    [ 4.728218] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
    [ 4.728221] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080
    [ 4.728223] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
    [ 4.728227] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
    [ 4.728231] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
    [ 4.728235] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
    [ 4.728238] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
    [ 4.728241] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff
    [ 4.728245] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff
    [ 4.728248] [drm] nouveau 0000:01:00.0: 5: 0x00000313: type 0x13 idx 5 tag 0xff
    [ 4.728254] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC581
    [ 4.751487] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8D1
    [ 4.767845] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD512
    [ 4.767855] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD604
    [ 4.768931] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
    [ 4.768933] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD863
    [ 4.783649] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    [ 4.783652] iwl3945: Copyright(c) 2003-2011 Intel Corporation
    [ 4.783734] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.783750] iwl3945 0000:02:00.0: setting latency timer to 64
    [ 4.788943] [drm] nouveau 0000:01:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes
    [ 4.808414] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
    [ 4.808421] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 1150mV fanspeed 100% timing 0
    [ 4.808426] [drm] nouveau 0000:01:00.0: 1: memory 200MHz core 275MHz shader 550MHz voltage 1150mV fanspeed 100% timing 1
    [ 4.808432] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 500MHz shader 1000MHz voltage 1200mV fanspeed 100% timing 3
    [ 4.808451] [drm] nouveau 0000:01:00.0: c: memory 199MHz core 275MHz shader 550MHz voltage 1200mV
    [ 4.810122] [TTM] Zone kernel: Available graphics memory: 1546316 kiB.
    [ 4.810125] [TTM] Initializing pool allocator.
    [ 4.810148] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    [ 4.816384] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    [ 4.836699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 4.836784] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.836842] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 4.845258] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    [ 4.845263] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
    [ 4.845413] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 4.845721] Registered led device: phy0-led
    [ 4.882355] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
    [ 4.882624] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    [ 4.882627] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
    [ 4.882815] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    [ 4.885055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.885059] [drm] No driver support for vblank timestamp query.
    [ 4.900126] firewire_core: created device fw0: GUID 00241b00e8a3be00, S400
    [ 5.098009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 5.101986] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40000000, bo ffff8800b9a04800
    [ 5.102069] fbcon: nouveaufb (fb0) is primary device
    [ 5.111353] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
    [ 5.167210] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 5.167290] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 5.218616] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 5.421315] scsi 5:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
    [ 5.422661] sd 5:0:0:0: [sdc] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
    [ 5.423168] sd 5:0:0:0: [sdc] Write Protect is off
    [ 5.423172] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 5.423672] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.423675] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.429540] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.429543] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.430063] sdc: sdc1
    [ 5.432036] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.432040] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.432042] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    [ 6.160954] Console: switching to colour frame buffer device 180x56
    [ 6.163432] fb0: nouveaufb frame buffer device
    [ 6.163434] drm: registered panic notifier
    [ 6.163442] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    [ 6.732886] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 6.950620] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.966588] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.084796] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
    [ 9.143563] r8169 0000:08:00.0: eth0: link down
    [ 9.143572] r8169 0000:08:00.0: eth0: link down
    [ 11.625158] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
    [ 13.659460] NET: Registered protocol family 10
    [ 13.660273] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 13.660460] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 13.816958] FS-Cache: Loaded
    [ 13.841072] FS-Cache: Netfs 'cifs' registered for caching
    [ 13.871446] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.880618] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.884067] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.897017] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.901572] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.913913] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.917007] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.930569] CIFS VFS: cifs_mount failed w/return code = -101
    [ 16.370722] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
    [ 16.372460] wlan0: authenticated
    [ 16.375907] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
    [ 16.386877] wlan0: RX AssocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
    [ 16.386885] wlan0: associated
    [ 16.389143] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.491123] Intel AES-NI instructions are not detected.
    [ 16.677727] padlock_aes: VIA PadLock not detected.
    [ 27.296946] wlan0: no IPv6 routers present
    [ 50.863694] r8169 0000:08:00.0: eth0: link up
    [ 50.864363] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 54.661658] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.1
    [ 61.110061] eth0: no IPv6 routers present
    [ 356.785500] wlan0: deauthenticated from 00:26:4d:36:95:d0 (Reason: 3)
    [ 356.840075] cfg80211: Calling CRDA for country: DE
    [ 360.656160] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
    [ 360.658086] wlan0: authenticated
    [ 360.658215] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
    [ 360.670543] wlan0: RX ReassocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
    [ 360.670550] wlan0: associated
    The slow startup would not be a problem but netfs and mpd do not like it when the network is not up when they start (mpd music dir is on a network share), so I have to manually restart netfs every time I reboot.
    Other computers on the same network do not have the same problem, so I do not think it has anything to with the router.
    Is there anything I can do to make my ethernet card initialize faster?
    If you need any more information, please ask.
    Last edited by rtoijala (2011-11-07 14:32:27)

    Strike0 wrote:... but dont you need some sort of dhcp client/or daemon for that as well?
    Try adding dhcpd to your rc.conf array.
    Netcfg seems to automatically start dhcpcd (I can see it htop).
    Strike0 wrote:Alternatively check this: https://wiki.archlinux.org/index.php/Ne … _of_dhcpcd
    This did not change the time. The only change was that netcfg started dhclient instead of dhcpcd.
    Strike0 wrote:what happens if you pull the network cable after it got the link, wait until network is unreachable and then plug it in again? Does that take 40 seconds as well for the new dhcp lease?
    Yes, it takes 40-60 seconds to get a connection after plugging the cable in again.
    ratcheer wrote:What driver is your kernel loading? I have a very similar Realtek ethernet controller and it does not work well at all with the kernel's default r8169 driver. I had to go to Realtek's website and download the older driver r8168, which works perfectly for me.
    My kernel is loading r8169. r8168 is available in the AUR. I'm going to try it as soon as I can.
    Thanks.
    EDIT: r8168 needed only 10 seconds from loading the driver to having a connection. Thank you for the tip! Including [SOLVED] in thread topic.
    Last edited by rtoijala (2011-11-07 14:32:47)

  • More Trouble with Realtek Ethernet RTL8111/8168/8411 (rev 12)

    Hello everybody!
    I got the same problem as others with the ethernet controller model mentioned in the title, but i have (rev 12) not 6 or 10 like others ...
    I followed this thread:
    https://bbs.archlinux.org/viewtopic.php?id=176413&p=2
    ... but none of the solutions worked.
    i plugin the ethernet cable but network manager still shows "no cable attached" and no ip adress information ...
    here are my details:
    i have the same problem in kernel 3.16 and 3.14
    $ ifconfig
    enp3s0f1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether 00:90:f5:f9:fd:d9 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
    inet 127.0.0.1 netmask 255.0.0.0
    inet6 ::1 prefixlen 128 scopeid 0x10<host>
    loop txqueuelen 0 (Local Loopback)
    RX packets 656 bytes 51072 (49.8 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 656 bytes 51072 (49.8 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    wlp2s0: wlan chip by intel works fine
    $ lspci -v
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5287 (rev 01)
    Subsystem: CLEVO/KAPOK Computer Device 5494
    Flags: bus master, fast devsel, latency 0, IRQ 56
    Memory at f7c15000 (32-bit, non-prefetchable) [size=4K]
    Expansion ROM at f7c00000 [disabled] [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: rtsx_pci
    Kernel modules: rtsx_pci
    03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
    Subsystem: CLEVO/KAPOK Computer Device 5494
    Flags: bus master, fast devsel, latency 0, IRQ 61
    I/O ports at e000 [size=256]
    Memory at f7c14000 (64-bit, non-prefetchable) [size=4K]
    Memory at f7c10000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169
    Kernel modules: r8169
    the computer that has the problem is a laptop and i dunno why there are 2 Realtek Entries ... it definitly has only ONE ethernet port!
    ((installing aur r8168 and loading the module ofc did not fix the problem as suggested by others ...))
    $ dmesg | grep 8169
    [ 2.304595] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.304609] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
    [ 2.310138] r8169 0000:03:00.1: irq 61 for MSI/MSI-X
    [ 2.310452] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc900018c6000, 00:90:f5:f9:fd:d9, XID 1c800880 IRQ 61
    [ 2.310457] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 5.594516] r8169 0000:03:00.1 enp3s0f1: rtl_phy_reset_cond == 1 (loop: 100, delay: 1).
    [ 5.596608] r8169 0000:03:00.1 enp3s0f1: link down
    thanks for reading!
    Last edited by brrbrrbruno (2014-08-30 03:28:21)

    Any updates? I have RTL8111/8168/8411 version 01 and it's not working at al for me (currently on 3.16.3-1-ARCH)
    [root@pc whoop]# netctl start static
    Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
    [root@pc whoop]# systemctl status [email protected]
    ● [email protected] - A basic static ethernet connection
    Loaded: loaded (/etc/systemd/system/[email protected]; enabled)
    Active: failed (Result: exit-code) since Thu 2014-09-25 17:31:45 CEST; 8s ago
    Docs: man:netctl.profile(5)
    Process: 1021 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
    Main PID: 1021 (code=exited, status=1/FAILURE)
    Sep 25 17:31:40 pc systemd[1]: Starting A basic static ethernet connection...
    Sep 25 17:31:40 pc network[1021]: Starting network profile 'static'...
    Sep 25 17:31:45 pc network[1021]: No connection found on interface 'eth0' (timeout)
    Sep 25 17:31:45 pc network[1021]: Failed to bring the network up for profile 'static'
    Sep 25 17:31:45 pc systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
    Sep 25 17:31:45 pc systemd[1]: Failed to start A basic static ethernet connection.
    Sep 25 17:31:45 pc systemd[1]: Unit [email protected] entered failed state.
    [root@pc whoop]# journalctl -xn
    -- Logs begin at Tue 2014-02-04 00:43:12 CET, end at Thu 2014-09-25 17:31:45 CEST. --
    Sep 25 17:31:40 pc systemd[1]: Starting A basic static ethernet connection...
    -- Subject: Unit [email protected] has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit [email protected] has begun starting up.
    Sep 25 17:31:40 pc network[1021]: Starting network profile 'static'...
    Sep 25 17:31:40 pc kernel: r8169 0000:03:00.0 eth0: link down
    Sep 25 17:31:40 pc kernel: r8169 0000:03:00.0 eth0: link down
    Sep 25 17:31:40 pc kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Sep 25 17:31:45 pc network[1021]: No connection found on interface 'eth0' (timeout)
    Sep 25 17:31:45 pc network[1021]: Failed to bring the network up for profile 'static'
    Sep 25 17:31:45 pc systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
    Sep 25 17:31:45 pc systemd[1]: Failed to start A basic static ethernet connection.
    -- Subject: Unit [email protected] has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit [email protected] has failed.
    -- The result is failed.
    Sep 25 17:31:45 pc systemd[1]: Unit [email protected] entered failed state.
    Last edited by whoop (2014-09-25 15:37:59)

  • Battery and ac-adaptor problem on LINUX with [b]Satellite L10-102[/b]

    Hi,
    However I installed Linux.I'm trying from at last month.
    I installed and tired some of linux type : Mandriva 10.1 OE, Mandriva LE 2005, Knoppix 3.8, kurumin 3.0,kurumin 4, kanotix (latest rel.), suse 9.1 , kubuntu 4.0...
    I installed a lot of linux applications : kacpi, toshutils, fnfx, acpi tools, laptop-mode, some kernel acpi patches...
    I complied some of kernels : 2.6.8-11mdk, 2.6.9,2.6.11, 2.6.12 ..
    However I can't get battery and ac-adaptor info-states on linux.
    What I can do ?

    Feliks,
    I was tried so at last month :
    first I writed it : L10 and what the answer is you know(*).
    second I writed it : L10-102 and what the answer is you know(*).
    (*) The same answer there is all of both :
    "Input error
    Please insert the Type without any extension like 'CDS' or 'DVD'.
    Only numbers and M,A,R,P or S on the first character are allowed!
    E.g. A30, 5200, M10, P10.
    Please do not use blanks. "
    Thanks...
    I tried Mepis 3.3.1-1 distro on satellite L10-102 at yesterday.It can't get battery and ac-adaptor status too.
    I'm waiting for yours help!
    Message was edited by: abagatir

Maybe you are looking for

  • Trying to install Acrobat Pro XI on Windows 2008R2 VM

    Our desktop guys ordered Acrobat Pro XI for some 32-bit Windows 7 VM's. We also have some server applications running 64-bit Windows 2008R2 that need it and I'm attempting to create a silent install for.  I used the customization wizard provided by A

  • Trouble loading an xml file - claims not to be terminated correctly

    I'm trying to load some data in an xml file to create a tree view.  Before that I created this code with hardcoded xml definition which works fine and creates my treeview: <?xml version="1.0" encoding="utf-8"?> <csxs:CSExtension xmlns:fx="http://ns.a

  • How do I download an attachment from an e mail?

    I can open a pdf or whatever in my client e mail or on the web browser (Safari) but how do I save it so I can open it later without opening mail? Thanks for your hlep. DC

  • How to synchronize the new product I bought

    I ordered ER suite 7.0 from palm store. I've been trying to synchronize it to my handheld palm tx but it's not working. I remember I downloaded a trial pack of ER suite 7.0 which is already expired. I cannot enter my new device ID to have my newly bo

  • Swf view/convert for ipad app

    I am trying to develop an app for iPad/iPhone device so that I can view swf file. We have a component developed in flex where we are calling swf file into that window. I am trying to load that proofing component in ipad/iphone app. Actually I am open