Equium P200: sometimes looses WLan connection

Hi there
Looking for help, my Equium P200 sometimes looses connection to the net. My partners do not!
Also when in other peoples it losses signal so I know its the laptop, its very intermittent , it can go for months and nothing then it can do it twice in one night!
When it does happen I run the off line help it says that there is nothing wrong with the pc! It says there is no networks to connect to despite i know there is any ideas
I think its a Atheros or something similar. Sorry so vauge

Hi
You could try to update the WLan driver in most cases this helps
The BIOS update would be also advisable if a newer BIOS version is available on the Toshiba European driver page.
Sometimes something like that happens to me if it happens I click right on the WLan icon in the taskbar and choose repair.
Mostly this helps to get the WLan back

Similar Messages

  • Equium P200 problem with WLAN networking

    I have recently bought Equium P200-1ED.
    When Im disconnected from wireless network the laptop cant reconnect itself and it cant see any networks available. I have to restart my laptop to connect again.
    I have checked the settings and everything seems to be fine.
    Can anyone help me please?

    Can you use WLAN if you disable WLAN using FN+F8 key combination and enable it again?

  • Equium P200-1IR - Wireless is connected but cannot access the internet

    Hi ya,
    Need a little help!!
    I have just bought an Equium P200-1IR.
    I have turned the wi fi on.
    I can see my router which is Talk Talk.
    I can get the laptop to connect to the router and it says that I am connected,
    however I cannot access the internet.
    I tried the same process by inserting a wi fi dongle into the USB port
    on the laptop and exactly the same happens.
    We have other computers in the house that connect to the router and internet
    ok using the wireless dongle.
    I have plugged a hard wire connection from the laptop to the router and I can
    access the internet immediately with no problems, however would love
    to use the wireless feature.
    Any help really appreciated....Thanks
    Waynec

    Do you use the right channel and right encryption settings?
    This should be checked!
    It should be able to change the WLan channels in device manager -> WLan card -> Properties -> Advanced tab
    But I would also recommend disabling the encryption and password in router settings and to connect to Open Wlan of course this should be done only for testing purposes if the notebook would be able to connect to the open router, then this would mean that you used a wrong password.
    How about WLan driver update? Did you update the WLan driver? If not do that!

  • N97: Loosing WLAN Connection

    Hi friends
    Me again, sorry: Since I own the N97, it happens very often, that it looses the WLAN connection at my home network, without any reason. The icon remains, when I point to it, it says that it found the network, but when I choose connect, it doesn't work. I always have to restart the device, then it works ok, maybe for more than one day, but suddenly - again it stops working, but I cannot see any action from my side which causes this.
    Any idea?
    Another question related to this: is it necessary to use a program like WeFi with the N97, does it have any advantages?
    Thanks!
    Lonie

    What message do you get? Look for running apps in the background that uses WLAN. What puzzels me, is why it's getting worse after hours. Look if the phone is registered (MAC address) in the router or AP.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Is the Equium P200-1ED capable of powering USB devices connected to it?

    (1) Possibly related to my previous question is anyone able to confirm whether the Toshiba Equium P200-1ED is able to power external devices connected to it via its USB ports?
    (2) Can all 6 USB ports be used to simultaneously power 6 external USB devices?
    What is wrong?
    Please advise.

    I presume you ask again for the advice related to this question:
    http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=115026#115026
    From my knowledge all USB ports supports the USB standard and provides 500mA.
    But sometimes an USB device needs more as 500mA and then you will have to use an external power supply for the USB device.
    Sometimes its advisable to use an USB hub which supports an own power supply.
    > (2) Can all 6 USB ports be used to simultaneously power 6 external USB devices?
    As I said, possibly some 3rd external USB devices would need more as 500mA and in such case you should use an external power supply for the USB devices.
    Bye

  • [SOLVED] Loosing Wireless Connection

    I am constantly loosing my wireless connection while I am trying to download something, usually I don't reach 60 MB and it's gone.
    I am also loosing my connection while browsing the internet for 2-3 hours.
    In both cases it reconnects after 2 minutes ,sometimes more.
    I still have my IP address during these 2 minutes.
    I tried different connection methods : wifi-menu, netctl, NetworkManager , manually with wpa_supplicant and dhcpcd(or dhclient) but they all lead to loosing my connection after a time.
    iwconfig
    enp11s0 no wireless extensions.
    wlp2s0 IEEE 802.11abgn ESSID:"FRITZ!Box Gastzugang"
    Mode:Managed Frequency:2.412 GHz Access Point: AccesPointX
    Bit Rate=52 Mb/s Tx-Power=19 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=40/70 Signal level=-70 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:1698 Invalid misc:454 Missed beacon:0
    lo no wireless extensions.
    ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    2: enp11s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
    inet 192.168.179.32/24 brd 192.168.179.255 scope global wlp2s0
    valid_lft forever preferred_lft forever
    sudo journalctl -u NetworkManager.service
    -- Reboot --
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> NetworkManager (version 0.9.8.8) is starting...
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
    Mar 15 18:05:03 Alik NetworkManager[161]: <info> WEXT support is enabled
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: parsing Auto FRITZ!Box Gastzugang ...
    Mar 15 18:05:09 Alik NetworkManager[161]: keyfile: read connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> monitoring kernel firmware directory '/lib/firmware'.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill2: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/bcma0:0/ieee80211/phy0/rfkill2) (dri
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/platform/dell-laptop/rfkill/rfkill0) (platform driver dell-laptop)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi hardware radio set enabled
    Mar 15 18:05:09 Alik systemd[1]: Started Network Manager.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiFi enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WWAN enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> Networking is enabled by state file
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): using nl80211 for WiFi device control
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): driver supports Access Point (AP) mode
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'brcmsmac' ifindex: 3)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/0
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): bringing up device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): preparing device.
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (wlp2s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <warn> failed to allocate link cache: (-26) Protocol mismatch
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): carrier is OFF
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): new Ethernet device (driver: 'tg3' ifindex: 2)
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): exported as /org/freedesktop/NetworkManager/Devices/1
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Mar 15 18:05:09 Alik NetworkManager[161]: <info> (enp11s0): bringing up device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): preparing device.
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> (enp11s0): deactivating device (reason 'managed') [2]
    Mar 15 18:05:10 Alik NetworkManager[161]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:1c.5/0000:0b:00.0/net/enp11s0
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:10 Alik NetworkManager[161]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Couldn't acquire object manager proxy: Error calling StartServiceByName for org.bluez: GDBus.Error:org.freedesktop.systemd1.Loa
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> wpa_supplicant started
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:11 Alik NetworkManager[161]: <warn> Trying to remove a non-existant call id.
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: starting -> ready
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
    Mar 15 18:05:11 Alik NetworkManager[161]: <info> (wlp2s0) supports 4 scan SSIDs
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Auto-activating connection 'Auto FRITZ!Box Gastzugang'.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) starting connection 'Auto FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTING
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless): connection 'Auto FRITZ!Box Gastzugang' has security, and secrets exist. No new secrets needed.
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'ssid' value 'FRITZ!Box Gastzugang'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'scan_ssid' value '1'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Config: added 'psk' value '<omitted>'
    Mar 15 18:05:14 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Config: set interface ap_scan to 1
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: inactive -> associating
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'FRITZ!Box Gastzugang'.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> dhclient started with pid 321
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning IP6 addrconf.
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
    Mar 15 18:05:15 Alik dhclient[321]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:15 Alik dhclient[321]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:15 Alik dhclient[321]: All rights reserved.
    Mar 15 18:05:15 Alik dhclient[321]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:15 Alik dhclient[321]:
    Mar 15 18:05:15 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
    Mar 15 18:05:15 Alik dhclient[321]: Listening on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on LPF/wlp2s0/XX:XX:XX:XX:XX
    Mar 15 18:05:15 Alik dhclient[321]: Sending on Socket/fallback
    Mar 15 18:05:15 Alik dhclient[321]: DHCPDISCOVER on wlp2s0 to 255.255.255.255 port 67 interval 6
    Mar 15 18:05:16 Alik dhclient[321]: DHCPREQUEST on wlp2s0 to 255.255.255.255 port 67
    Mar 15 18:05:16 Alik dhclient[321]: DHCPOFFER from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: DHCPACK from 192.168.179.1
    Mar 15 18:05:16 Alik dhclient[321]: bound to 192.168.179.32 -- renewal in 415231 seconds.
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> (wlp2s0): DHCPv4 state changed preinit -> bound
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> address 192.168.179.32
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> prefix 24 (255.255.255.0)
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> gateway 192.168.179.1
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> nameserver '192.168.179.1'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> domain name 'fritz.box'
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    Mar 15 18:05:16 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> NetworkManager state is now CONNECTED_GLOBAL
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Policy set 'Auto FRITZ!Box Gastzugang' (wlp2s0) as default for IPv4 routing and DNS.
    Mar 15 18:05:17 Alik NetworkManager[161]: <info> Writing DNS information to /usr/bin/resolvconf
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) successful, device activated.
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) starting DHCPv6 as requested by IPv6 router...
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> Activation (wlp2s0) Beginning DHCPv6 transaction (timeout in 45 seconds)
    Mar 15 18:05:18 Alik NetworkManager[161]: <info> dhclient started with pid 380
    Mar 15 18:05:18 Alik dhclient[380]: Internet Systems Consortium DHCP Client 4.3.0
    Mar 15 18:05:18 Alik dhclient[380]: Copyright 2004-2014 Internet Systems Consortium.
    Mar 15 18:05:18 Alik dhclient[380]: All rights reserved.
    Mar 15 18:05:18 Alik dhclient[380]: For info, please visit https://www.isc.org/software/dhcp/
    Mar 15 18:05:18 Alik dhclient[380]:
    Mar 15 18:05:18 Alik dhclient[380]: Listening on Socket/wlp2s0
    Mar 15 18:05:18 Alik dhclient[380]: Sending on Socket/wlp2s0
    Mar 15 18:05:19 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 1060ms.
    Mar 15 18:05:20 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 2120ms.
    Mar 15 18:05:22 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 4380ms.
    Mar 15 18:05:26 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 9150ms.
    Mar 15 18:05:35 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 18730ms.
    Mar 15 18:05:54 Alik dhclient[380]: XMT: Info-Request on wlp2s0, interval 36040ms.
    Mar 15 18:06:03 Alik NetworkManager[161]: <warn> (wlp2s0): DHCPv6 request timed out.
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> (wlp2s0): canceled DHCP transaction, DHCP client pid 380
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Mar 15 18:06:03 Alik NetworkManager[161]: <info> Activation (wlp2s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Mar 15 18:11:47 Alik NetworkManager[161]: <warn> Connection disconnected (reason 2)
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: completed -> disconnected
    Mar 15 18:11:47 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: disconnected -> scanning
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: scanning -> authenticating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: authenticating -> associating
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associating -> associated
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    Mar 15 18:11:51 Alik NetworkManager[161]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    Not surprisingly , everything works fine on Windows.
    Thanks for the help
    Last edited by ollen (2014-03-16 00:25:44)

    first of all I stopped my NetworkManager.service and then :
    sudo wpa_supplicant -Dnl80211 -iwlp2s0 -c/etc/wpa_supplicant/wpa_supplicant.conf &
    Successfully initialized wpa_supplicant
    wlp2s0: CTRL-EVENT-SCAN-STARTED
    wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    wlp2s0: Associated with XX:XX:XX:XX:XX
    wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    and then I run
    dhclient wlp2s0
    but no output after this command but I get my IP address
    I also ran this command
    dhcpcd wlp2s0
    and the output is
    dhcpcd[2163]: version 6.3.1 starting
    dhcpcd[2163]: DUID XX:
    dhcpcd[2163]: wlp2s0: IAID XXX
    dhcpcd[2163]: wlp2s0: soliciting an IPv6 router
    dhcpcd[2163]: wlp2s0: rebinding lease of 192.168.179.32
    dhcpcd[2163]: wlp2s0: leased 192.168.179.32 for 864000 seconds
    dhcpcd[2163]: wlp2s0: adding route to 192.168.179.0/24
    dhcpcd[2163]: wlp2s0: adding default route via 192.168.179.1
    dhcpcd[2163]: forked to background, child pid 2558
    a little bit of
    journalctl -u wpa_supplicant.service
    -- Reboot --
    Mar 15 18:05:09 Alik systemd[1]: Starting WPA supplicant...
    Mar 15 18:05:11 Alik systemd[1]: Started WPA supplicant.
    Mar 15 19:53:19 Alik wpa_supplicant[289]: Successfully initialized wpa_supplicant
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=2
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Key negotiation completed with XX:XX:XX:XX:XX [PTK=CCMP GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-CONNECTED - Connection to XX:XX:XX:XX:XX completed [id=0 id_str=]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: WPA: Group rekeying completed with XX:XX:XX:XX:XX [GTK=TKIP]
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:53:19 Alik wpa_supplicant[289]: rfkill: WLAN hard blocked
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:53:19 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Authentication request to the driver failed
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: SME: Trying to authenticate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Trying to associate with XX:XX:XX:XX:XX (SSID='FRITZ!Box Gastzugang' freq=2412 MHz)
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Associated with XX:XX:XX:XX:XX
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: Authentication with XX:XX:XX:XX:XX timed out.
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    Mar 15 19:54:39 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=1 duration=10
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="FRITZ!Box Gastzugang" auth_failures=2 duration=20
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: Reject scan trigger since one is already pending
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: No network configuration found for the current AP
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-DISCONNECTED bssid=XX:XX:XX:XX:XX reason=3 locally_generated=1
    Mar 15 19:54:40 Alik wpa_supplicant[289]: wlp2s0: CTRL-EVENT-SCAN-STARTED
    Last edited by ollen (2014-03-16 00:17:44)

  • Mac Mini Late 2012 OS X 10.9.4 loosing network connectivity

    I haven't found the exact issue on the forums nor outside it so I'm creating a new thread.
    My Late 2012 Mini started loosing network connectivity after upgrading to 10.9.4, both WiFi and Ethernet.
    Sometimes it takes around 5 minutes, sometimes more than 30 but the connectivity gets disrupted continuously, the packets stop going in or out for around 30 seconds. I've done PRAM and SMC resets, I've changed network locations, nothing helps and I've found nothing interesting in the system logs.
    Also I can't login to the Apple bugtracker due to some error so I'm reporting it here.
    The only USB devices i have connected are keyboard and mouse.
    Any help will be appreciated.
    Mac Mini Late 2012 i5
    OS X 10.9.4 Mavericks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Satellite M70: WLAN connection lost

    Hello!
    I have Satellite M70 and I use integrated Intel WLAN card 2200bg. I have the latest drivers downloaded from Toshiba web site and Asus WLAN router w520g with latest firmware. Connection signal is excellent but sometimes actually very often connection is lost for 5-10 seconds.... I am downloading files all the time so there is no idle time in network traffic.
    How can I inspect what is reason for losting connection?
    Could authentication method or channel mode be a reason for problems?

    Hi!
    I updated my driver(latest one from intel website) and problem still exists. But now with Intel Wireless utility I can see error messages when connection goes down. I also opened support case to Intel about this problem. Let's see what they suggest.
    I have also tested different kind of variations of configurations (power settings etc.) but no helps!
    Now I am testing WLAN connection without authentication and it seems to work ok without connection lost. I will test different kind of authentication methods because i really want to see what authentication causes problems.
    One thing I can say more. If I want to see connection break as soon as possible, I have to generete traffic with different kind of p2p programs and I also ping my router (default gateway) with command ping -t -l 1500 same time.

  • N95-Continuous "Create WLAN connection in offline ...

    Hello All,
    I tried using the search and could not find anything on this.
    Up until now, i haven't had a problem like this. Upon turning on the phone, i keep getting the "Create WLAN connection in offline mode?" prompt. When i hit "NO", my phone resets! When i hit "YES", sometimes nothing happens and other times, the phone freezes up and then resets.
    I have WLAN scanning set to off by default. I held down the options button to check for any apps running in the background that may be causing this, but none are open. (Just the "Standby" icon is present.)
    Again, this just started happening. I have recently installed programs like Fring, Shozu, and TruPhone. I thought either Fring or TruPhone may have been the culprits so i removed them both, but the WLAN prompt --> restart issue is still present.
    I am curious if others have experienced this. My phone is still V 10.0.018.
    Please help! Any assistance would be greatly appreciated!Message Edited by adamyuki on 14-Jul-200704:50 PM

    I haven't had this happen to me, and I haven't seen any other reports in the forum.
    One thing you can try is to reset the phone using the instructions you can find in this post :
    /discussions/board/message?board.id=smartphones&me​ssage.id=4007
    However please be aware that doing so will wipe ALL the data from your phone such as information in your calendar, contacts and so on.
    In order to save your data you can use the PC Suite application to save and restore the data from your phone - this software can be found here :
    http://www.nokia.com/pcsuite
    One thing to note is that as part of these diagnostics, you should NOT restore any backup or install any software on the phone as you could be putting the problem back onto the phone.
    If this doesn't work then it's likely you have a hardware fault and you should approach your local Nokia Service Centre to get your phone fixed.
    Hope this helps.
    Please let me know how you get on.Message Edited by edwardquan on 16-Jul-200701:16 AM
    Regards,
    Edward

  • Equium P200-1ED Installing Windows XP Problem - SATA Drivers

    I have just bought a Toshiba Equium P200-1ED laptop with Vista installed and want to install my copy of Windows XP Pro. This is the latest disc with SP2 included.
    When I boot up it does not recognise the hard drive. I assume I need to download these drivers and load them onto a floppy and hit F6 when the windows setup screen prompts me to do so.
    Questions are;
    1) Where can I get these drivers from?
    2) Will the machine recognise a USB floppy Drive?
    3) Am I right about what I need to do?
    Thanks in advance for your help. :8}

    How to install XP Home on the following Vista laptop. 05/01/08
    Toshiba Equium A200-1V0 PSAF5E
    Introduction
    These are the steps taken by us to remove Vista from our Toshiba laptop and replace it with XP Home. There may be inconsistencies in our methods and we may not have all of the exact drivers installed, but everything appears to work OK for us.
    Our laptop now runs much faster, opens and closes faster and is more stable.
    This is not a 5 minute operation. It should not be attempted by anyone with only a passing knowledge of computers as it is very easy to screw things up. The shop you bought your PC from will charge a lot to fix things and they will probably insist on re-installing Vista!!.
    Be prepared that this will also probably invalidate your warranty.
    Luckily, I have a 2nd PC running XP that allows me to access the web. This is very useful as it means that while your Vista machine is 'broken' you can still search for help and download driver files. I also used my 2nd PC to create the modified XP installation CD mentioned further on.
    You must have access to the web via some PC or other to get the required drivers.
    Method
    Firstly, while you still have Vista on your laptop machine, download and run an interrogation program such as 'Belarc advisor' which will list all the drivers and software that are installed on your laptop. Print it out for future reference.This may be useful later when searching on the web for any drivers that may need updating.
    Now, make sure you have noted down all the required settings for your Internet connection.
    Also, backup any files that you may have placed on the hard drive as you will lose the lot including any emails and address books and web favourites etc.
    Unfortunately, the Toshiba disc that comes with this laptop does not appear to have any of the required drivers with it. Instead, I think that it relies on Vista keeping copies on your hard drive. This is not very bright as when the hard drive fails you have lost everything!
    This therefore means that you have to go on the web and search for all the required drivers to run XP successfully.
    Some we could not find, for example the Wireless network adapter, however this was no problem as once we had installed XP and connected to the web via the Ethernet cable to our Router we were able to run 'Update Driver' for each item missing.
    Go to 'Device Manager' via 'Control Panel' then 'System' then 'Hardware'. Then look for any yellow question marks for any problems. Right click and run 'Update Driver' for the hardware update wizard and allow the PC to look on the web 'this time only'.
    The ones we did this way were: Wireless adapter, Audio adapter.
    Unfortunately an original XP SP2 CD does not contain the required drivers for this laptop. Therefore when you boot the CD it will, after a few minutes of installing files, say that you have a hardware problem as there are no drives present.
    To rectify this, you will need to download the correct Intel ICH8M SATA AHCI Controller drivers. I couldn't find this on the Intel website, but instead searched on Google for it. and got it from: http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2101
    The other required drivers that we found on the web were:
    Intel chipset device software installer
    Web page
    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=816&DwnldID=14528 &strOSs=45&OSFullName=Windows* XP Home Edition&lang=eng
    Or if this link doesn't work try this:
    http://support.intel.com/support/chipsets/inf/sb/CS-021273.htm
    Select 'Download Intel chipset software installation utility' on the left hand side and select your operating system 'XP Home'
    Select 'INF Update Utility - primarily for Intel 3, 900 series chipsets'
    and download it.
    Intel graphics driver: Mobile Intel(R) 965 Express Chipset
    Web page
    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=2800&DwnldID=1438 8&strOSs=45&OSFullName=Windows*%20XP%20Home%20Edit ion&lang=eng
    Or if this link doesn't work try this:
    http://support.intel.com/support/graphics/intelgm965/
    Now select 'software and drivers' on the left hand side and select your operating system 'XP Home'
    You will be presented with a list of files.
    Select Intel® Graphics Media Accelerator Driver for Windows* XP (exe)
    and download it.
    Marvell Yukon Ethernet Driver
    Web page
    http://www.marvell.com/drivers/driverDisplay.do?dId=175
    Or if this link doesn't work try this:
    http://www.marvell.com/drivers/search.do?reload=false
    On the right hand side, select 'W2000/ XP/2003/Vista x86 & x64 Multi-Language Installer (32-bit and 64-bit) for Yukon Devices'
    Creating the XP Drivers disc
    Add the SATA drivers to a copy of your XP install CD using a program such as NLite.
    You will need enough spare hard drive memory to take a copy of your XP install CD (approx 700MB).
    Run the program 'sp37005.exe' and it will install to your hard drive. Don't install to a floppy.
    Download 'NLite' from: http://www.nliteos.com/download.html
    When you run NLite it will probably say that you need to install '.net Framework', if so, quit NLite and go and find the program. This is a Microsoft program that you can find by searching on Google for the relevant page on the Microsoft website.
    Now place your XP install disc in your CD drive, if it autoruns, exit it.
    Then run Nlite and follow on screen instructions.
    The program will ask where your XP disc is then it will ask where you want to save the copy.
    On the 'Task selection' screen select 'Drivers' and 'Bootable ISO'. then press 'Next'.
    Now select 'Insert' then 'Multiple Driver folder' and go and find your downloaded SATA driver files. Now select 'All' and 'OK. The program will list the available SATA drivers. Only select the two that mention 'ICH8M'. Now press 'Next'. The screen will show the selected drivers. Press 'Next' again and then 'Yes' to the prompt, and then 'Next' when done
    You are now presented with the 'Bootable ISO' screen.
    Put a new burnable CD in your CD writer, wait for it to be recognised and exit any window that might pop up to allow you to install files
    Now, in Nlite, under 'Mode' select 'Direct Burn'
    Under 'Label' enter something like ' XP for Toshiba Equium A200' to identify the disc.
    Leave Advanced settings alone and now add in the other required drivers by clicking explore and copying them to the root directory of the temporary XP directory on your hard disc. It might be best to create a 'Drivers' folder in the root directory to make them easy to find later.
    Now click the 'Burn' button. Now follow the rest of the instructions to complete.
    You have now created an XP install disc which contains your required SATA drivers.
    -As you can tell, this is quite convuluted but avoids you having to buy a USB floppy drive and it provides a neat solution.
    Hasta La Vista!!
    Now you are ready to begin the cleansing process, if you are brave enough to continue....
    Firstly, re-boot your laptop and while booting press F12 to change the boot order so that the DVD/CD ROM is first. Alternatively use F2 and then change the Boot order from there.
    Now insert your new XP install disc in the DVD/CD drive and re-boot the PC, selecting boot from CD when prompted.
    The XP CD will now start copying files and eventually will display an options screen
    Select to install Windows.
    Then delete the C: hard drive partition (with Vista on)
    Delete the F drive partition used by Vista also.
    You will have to follow lots of warning prompts to delete the partitions.
    Now follow the instructions to create an NTFS partition on the C drive.
    Now install XP as instructed.
    Don't worry that the graphics are a bit chunky as once Windows has finished installing you can run the graphics driver you copied to the the XP CD to correct this.
    Run the three driver files:
    win2k_xp14311.exe Intel graphics driver
    infinst_autol.exe Intel chipset software installation utility'
    setup.exe Marvell Yukon Ethernet Driver
    Your graphics should now improve and you should now be able to connect to the web (after running the web setup wizard). But don't do this until you have installed your Antivirus and Firewall software.
    Now go to 'Device Manager' via 'Control Panel' then 'System' then 'Hardware'. Then look for any yellow question marks for any problems. Right click and run 'Update Driver' for the hardware update wizard and allow the PC to look on the web 'this time only'.
    Hopefully, everything should now run OK.
    Now go and have a drink to celebrate!

  • ACS SE: no clean shutdown / sometimes looses IP config

    Hello,
    we recently upgraded a ACS applicance from:
    Cisco Secure ACS: 3.2.3.11
    Appliance Management Software: 3.2.3.11
    Appliance Base Image: 3.2.2.2
    Status: Appliance is functioning properly
    to:
    Cisco Secure ACS: 3.3.1.16
    Appliance Management Software: 3.3.1.16
    Appliance Base Image: 3.2.2.2
    CSA build 4.0.1.543.2: (Patch: 4_0_1_543)
    Microsoft Security Bulletin MS04-11 and MS04-012: (Patch: 1_0_0)
    Status: Appliance is functioning properly
    After the last step in the upgrade, it wouldn't shut down properly, and this is still the case after that.
    Also, ever since, it sometimes looses its IP configuration.
    Anyone experienced this ? Any other solution then to start from scratch ?
    Thanks,
    bart

    Ok, I (again) reinstalled my first appliance (with the recovery CD) and the appliance connected to the network:
    I changed the default name into "ACS01" and used static ip-address "14.14.14.3"
    this is what I've got now in the AAA-server list (I didn't change anything yet):
    ACS01 : 169.254.67.156
    Self: 14.14.14.3
    In the Proxy Distribution Table, I have the following:
    AAA servers: Deliverance1
    Forward to: ACS01
    (I guess I have to switch those 2 as deliverance1 will apply to "self"?)
    So this means that there are 3 entries for one device! (ACS01 ,Self and Deliverance1)... Is this normal?

  • C 3-00 WLAN Connection Failed

    i newly purchased a Nokia c 3-00 with the firmware version 4.65. My WLAN does not work. It detects WLAN connections available but when i try to connect the phone to the network it shows "Connection Failed". The WEP key is Right and i am near the Router and there is no problem with the router as other Nokia Phones connect with no problems. The Nokia Website is showing a firmware update of  7.20 but when i enter my phone product code it shows that the firmware 4.65 is the latest available for my phone. I have checked the C 3-00 phones of my friends on various  routers and all those phones seem to have the same problem.
    Please Help Me out...
    If i need to update my phone to 7.20 how do i do it ? Nokia software updater shows my firmware is the latest.

    my nokia moble C3-00 sometimes WLAN connection failed  please clear the complaint

  • USB ADSL Modem fails to install on Equium P200-1ED

    I have a Toshiba Equium P200-1ED; Model Number# PSPB5E-003004KS.
    I wish to use my Thomson SpeedTouch 330 - a USB bus powered USB ADSL modem - to my Toshiba Equium P200-1ED and have downloaded Release 4.1 of the Windows Vista driver from this web-page:
    http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=471
    ... however when the Vista modem driver is executed, the software fails to recognise the Thomson SpeedTouch 330 ADSL modem when the driver software prompts me to connect the modem.
    The Thomson SpeedTouch 330 ADSL modem works perfectly when used with my old Toshiba/XP laptop (which was how I downloaded the Vista driver for the modem for the Equium).
    What is wrong?

    Problem Solved!
    Un-installing all USB modem device drivers, disconnecting all USB devices and removing all USB host controllers and hubs from the Vista device manager and then rebooting the notebook MADE NO DIFFERENCE.
    However when I received the new Thomson SpeedTouch 330 USB ADSL modem drivers on CD-ROM from the manufacturer the modem installed immediately.
    I can only assume that there is a problem with the download of Release 4.1 of the Windows Vista driver for the SpeedTouch 330 from this web-page:
    http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=471
    ... as the drivers on the CD-ROM from Thomson work - but their web download of the driver for the SpeedTouch does not.
    The problem was with the driver for Windows Vista - the laptop and modem now work correctly - as they should have done at the first installation attempt!
    Thanks for your help.

  • Imac loosing internet connection

    Have had iphones/itouch/ipad connecting to my home wi-fi network without issue for long as I can remember.
    I purchased my first apple computer/imac this past week.  My apple computer/mac knowledge is limited........
    I connected the imac to th wi-fi out of the box without issue, however it seems to loose it's connection from time to time, sometimes it re-connects sometimes it does not.  I thought it may have something to do with the mac going to sleep too often & failing to re-connect when it wakes, so I extended the time before it z's but do not believe that fixed the issue.
    Not comfortable changing anything on my own without getting some guidance first.

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 5
    Reset the System Management Controller.
    Step 6
    Reset the PRAM.
    Step 7
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    Step 8
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • Equium P200: realtek ethernet adaptor error installing Linux

    I have an old Equium P200 - 1Ed, which has started to play up.
    When I try to install Linux, it gives me a realtek ethernet adaptor error, and I researched the problem on the forums.
    Apparently my hard drive is old and decrepit.
    I tried reinstalling Vista from the Toshiba default CD, just out of curiosity, and it installed fine, except, the internet seemed unwilling to connect.
    Tried Linux again but still same realtek problem.
    Apparently I can download the flash bios driver, and try reinstalling the bios....seems like my last hope.
    Anyone know where I can get the bios driver for P200-1ED?

    > When I try to install Linux, it gives me a realtek ethernet adaptor error, and I researched the problem on the forums.
    Have you found some reasonable explanation on some Linux forum?
    Be careful with BIOS update. It is windows based update and can be started under windows OS.
    Best thing is if you use original Toshiba recovery image and start BIOS update. Be sure notebook is connected to AC power supply, all running applications closed and dont interrupt BIOS update.

Maybe you are looking for

  • Photoshop CS4 Freezes when opening PDFs

    When I drag two, 2-page PDFs onto Photoshop CS4 to open them, PS opens one page of one PDF and then freezes. I can replicate this every time I try. Once PS freezes it takes a little patience to get it to force quit. Any advice?

  • My edits are not being accepted or saved

    I am having issues with editing a PDF file, scanned from paper hardcopy and then edited in Adobe Acrobat X Pro.  I am able to edit fields either via Content>Edit Text, or also have tried using Recognize Text and OCR Suspects function on this document

  • Mini Mac, Peripherals, and Gaming

    Hello all and thanks for reading my post. I'm considering switching from Windows to Mac. I don't have the money to get an iMac yet but was thinking of getting a Mini Mac to start with. The reason for this decision leads to my 2 questions: 1) Are peri

  • SetEncoding() and application.cfc

    Is this a bug, or I just didn't understand the way it is supposed to work? I just finished determining that if one puts a <cfset setEncoding("form","encodingType")> in the psudo-consructor (after the <cfcomponent...> but before any <cffunction...) ta

  • Search help for Product id in SRM

    Hi , I have a requirement of changing the search help that is attached to the product id in SRM. we are using SRM7.0. Currently I see an elementary search help /SAPSRM/BBPH_PRODUCT on the webdynpro screen of shopping cart creation. This is an element