Equium P300-19O - How to install the newest Intel graphic driver

same problem as this guy ( http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=36626&tstart=0 )
tryed never display drivers from intel and for other laptops but none will install via the main exe file or through device manager.
if any one knows of a newer driver that works then a link would be helpfull.
thanks

i found the only way to update the driver is to go into the device manerger and right click the intel 965 and click uninstall.
once uinstalled i restarted the laptop then went back to the device manager to update the driver from the folder i downloaded and extracted the new driver from.
http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2800&OS FullName=Windows+Vista*+Home+Premium%2C+32-bit+version&lang=eng&strOSs=153&submit=Go%21
(above is for vista 32bit premium)
you want to download the zip file intended for use by Developers so all the bits are already extracted for it to update as the exe version wouldn't work for me.
HTH
mark

Similar Messages

How to install the apps on another drive ?

Hi,
Did any of you could install the creative cloud apps on another drive than C:program/adobe ?
My computer has a very small C drive and I could not manage to install the creative cloud apps on another hardrive (D:)
Thanks for your help
Fabien

Fabien you can adjust the install location with in the preference option within the Creative Cloud Desktop application. Please be aware that shared components will still need to be installed on your primary drive.

How long does the newest update take? My Mac has been installing for over an hour. Don't know what to do?

Installing the newest update for mavericks. Has been installing for over an hour. Don't know what to do. How long should it take?

I went to Apple Chat and they lead me through a power down and start up with Recovery Disc Utility (Hold down Apple and R keys when powering up).
Then was instructed to run Disk Recovery and it showed HD was error free. Then a reboot started up fine to desktop and showed update to 10.9.2 had been installed. I am guessing the internet connection my have been interrupted during the install.
Apple Chat folks are awesome and a short wait too.

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

My mac has been updated and when i go to install the newest itunes this pops up. 'Couldn't open "Install iTunes.pkg". This package type requires Mac OS X 10.5.' how can i fix this so i can get the new itunes?

my mac has been updated and when i go to install the newest itunes this pops up. 'Couldn't open "Install iTunes.pkg". This package type requires Mac OS X 10.5.' how can i fix this so i can get the new itunes?

Hi
Try to use "software update" option
to to apple menu -> software update or system preference -> Software update
( you may try to use an old package on new system )
HTH

I'm trying to install the newest version of iTunes but it's saying the version i have isn't new enough for me to update it. This makes no sense to me... how do I get the newest version?

I'm trying to install the newest version of iTunes but it's saying the version i have isn't new enough for me to update it. This makes no sense to me... how do I get the newest version?

I Think it is telling you your computer operating system is too old for the newest update.
What are you running?

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

I just installed the newest version of iTunes on my PC and when I try to open iTunes it says the copy is corrupted?

I have Windows 7 and I just installed the newest version of iTunes on my PC. Now whenever I try to open iTunes an error message comes up that the file is corrupt or wasn't installed properly. How do I reinstall the update or fix the problem?

... and that's a new one that I wasn't expecting ...
Okay ... lets try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Do I need to uninstall pages '08 before installing the newest version?

I bought a new MacPro in November 2013 and the technician transferred my iLife 'o8 package with Pages in it.
Can I install the newest Pages and Numbers over the existing ones, or do I need to uninstall the old ones first?
Can't seem to find a straight answer on the internet.
Thanks for a quick yes or no! If it's a 'yes', do you know how, or have a link that says how?
Glenn

The deal is I want the pages in my iPad mini to talk with the pages version on the laptop. That's the only reason I even want it since I usually use Microsoft Office, which talks to my windows friends with more ease.
Just in case anyone else is reads this thread, I just discovered that in the app store that when I clicked on 'purchases' there was a section that said I could download pages, numbers, and keynote for free. I was ready to purchase them individually. Saved from my own folly at the last minute...
Thanks again Fruhulda - if it weren't for you, I wouldn't have found the free stuff.

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

HT1399 I have a windows pc. It has windows 8 installed and I've installed the newest version of itunes but when I try to play anything, it won't. There's no sound and it says it's playing but it does not. What can I do?

I have a windows 8 computer and I installed the newest version of itunes because I used to have an ipod and I have a few purchases that I wanted to listen to. When I try to play them it says it's playing but I can't hear anything. It does not even says it's played the whole way. It just stays at the beginning. It won't let me pause. I checked my computer sound and there is nothing wrong with it. So there must be some software problem but idk what it is. If anyone can help I would appreciated. Thank-you

Hi DJBentley2011,
Welcome to Apple Support Communities.
It sounds like there is an issue burning CD's in iTunes. Is the playback issue only occurring on a specific device and does the disc show up correctly in iTunes? The article linked below should help you resolve optical drive issues, it walks you through identifying potential issues and provides troubleshooting suggestions.
iTunes for Windows: iTunes Diagnostics, CD/DVD Drive Tests
http://support.apple.com/kb/HT1567
I hope this helps.
-Jason

Equium P300-19O - How to install the newest Intel graphic driver

Similar Messages

Maybe you are looking for