Equivalent Data Field for 0EXRATEXACC Info Object

Hi Gurus,
I have created a DSO using 2lis_13_VDITM data source by installing the same Info Source. Here i am not able to find the Equivalent Data Field for 0EXRATEXACC Info Object which is in Transfer Rules.
So, Please let me know the Equivalent Data Field for 0EXRATEXACC Info Object.
Points are assigned defenetely.
Thanks in advance
Peter B

Hi,
U have a field KURRF in table KURRF
*Assign points if helpful.

Similar Messages

Data source for 0REGION info object

Hi.,
I need to load master data text for 0REGION info object. Can any one tell the standard data source for 0REGION.
Thanks,
selva

Hi Kumar,
Try these following data sources and choose the opt one.
    0TV_REGION_TEXT
    0CML_REGIN_TEXT
    0FS_REGCON_TEXT
    0EC_REGION_TEXT
    0REGION_TEXT.
With Regards,
Ravi Kanth.

How to create master data/text for an info object

Hi All,
I am working on a report and having a problem with an info object since it has no master data. This characteristic is supposed to be in the selection parameters and also should contain key and text in it. Since there is no master data for this info object there is no text and keys don't come up. Does any one knows how to add master data to this info object without reloading the ODS?
Thanks

Mike,
You shold load the master data into BW first,
othere wise you can do one thing
goto infopackage and schedule where in the update tab select the radio button
Always update the data,even if no masterdata is exist for that.
Regards.
Prasad

Multiple data sources for 1 info object

hi all,
i am working with ods 0fiap_003 info source overview u can see for 0comp_code
Company Code: Attributes and Tests (Flexible Update) this is a transaction data data source.
G/L Account: Attributes (Flexible Update) this is a transaction data data source
G/L Account: Texts (Flexible Update) 0GL_ACCOUNT_TEXT this is a transaction data data source
and there r master data data sources for these objects
G/L Account hierarchy text attributes r available.
so only for 0gl_account 5 data sources available.
3 master data ds.2 flexible data trans data data sources.same for comp code.
so how can we map for these 5 dsources in this scenario.
i am going to create process chains for master data(3) transaction data(1).
should i put trans .data info packages in the transaction data process chain
ex: G/L Account: Attributes (Flexible Update) this one.
plz suggest me
regards
sridhar

Hi Sri,
There can be multiple datasources assigned to a single master object. Only they should be unique per source system.
Regarding process chain, u should include the infopackage for transaction data in trans data process chain. This is because ur job scheduling for master and transaction load would differ. So the process chains should be separate.

Leading single ZERO for char info object

Hi All,
I have a info object which is having characteristic value. It is getting values like this
08976
076534
9865
065435
when it is coming to BW the ZEROs are skipped can some one help to get this value as it is.
IF iam having alpha converision then it add zeros as many has characteristic length define.
Please can someone help , how to get same format as it is.
Thanks

HI,
Check if you are using any conversion in the data source.
Also when you are trying to check the data, select the "do not use conversion" option to view the data.
because if you are using a char data type for the info object you're using, the leading zeroes would be as it is.
Regards,
Joe
Edited by: lazarus_joey on Feb 19, 2012 2:34 PM

Date fields for info structure S032 are not generated

Hi Experts,
I am trying to update set up tables for '02' using OLI2BW. I excluded some plants from selection and executed the set up. But the job run for few mins and completed with the message "Date fields for info structure S032 are not generated".
I couldn't see any records in RSA3.
Please through some light on this issue.
Points reward for usefull help.
Please no wild guess.
Regards,
-N-

Did you find out why. I am getting same message.
Thanks
Shalini

Generating export datasource for an info object

Hello Guys
I am working on BW 3.5. I need to generate an export data source for an infoobject so that I can load its texts into another target IO. When I go into the infosources tab, and right click on the particular IO, it gives me the option of creating an export data source.
My question is: How do i transport this data source from DEV --> QA? Do we have to re-create the export data source in each system individually, ie DEV, QA and PROD.
Secondly, when I could see the export data source in the the BWQ source system, i tried moving the transfer rules for the DS to the target IO and it gave an error.
Error message:
Mapping between data source 80CRED_GROUPT and source system BWQCLNT100 is inconsistent
Field CRED_GROUP will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field C_CTR_AREA will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field LANGU will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Field TXTMD will not be delivered from DataSource 80CRED_GROUPT in source system BWQCLNT100
Why is this happening? And as i asked before, can i transport an export DS or do I create it in each environment individually? Please note: This is an export DS for an info object.

Hi Srinivas,
You can transport the export data source across the landscape(Dev to QA).
You do not eed to generate it in each system.
Also ensure that the conversion of logical system names or the source system names has been maintained.
You are right it looks like the data source creation was a problem hence it is not alllowing importing transfer rules.
You may try to recollect the export data source and transport and then once it is transported successfully replicate metadata of the self system.
Now transport the transfer rules.
Hope it works out,
Best regards,
Sunmit.

To Join two SAP fields into one info object

Hi All,
Can you please suggest the best method to concatenate values from two R/3 fields into one info object master data table?
The requirement is to create a Sales report where I need to report on sales against sales type.
Sales type is a list of joint values of item category ( 0ITEM_CATEG) and bill type (0BILL_TYPE).
So, I need a list of all item categories and billing types in a single object and report sales value against it.
Please suggest.
Thanks,
Sharmishtha

Hi Venkat,
In DSO any case you will not be having more than 16 Keys. I am surprised seeing requirement of more than 16 keys, but anyways you need to go with some workaround.
You can concatenate multiple Fields and map to one Dummy InfoObject which will be Key in DSO so in actual you have more than 16 Keys but have 16 Keys in system.
But analyze requirement in detail because this will increase data redundancy and time for load will get increased.
Also for new issues start new discussion otherwise people will not able to help you in this forum.
Regards,
Ganesh

How to upload data into SAP BW Info Objects using SAP XI

Hi,
I need to upload master and hierarchy data into SAP BW Info Objects using SAP XI as EAI.
Can anyone suggest me the best solution to do it.
Thanks in Advance,
Volker.

Hi! Have you not checked the BW-XI Integration document? It is available on the main page of the SDN section for XI. Almost all the steps for the integration are there...

Can transaction data be loade into info object

Hi Gurus
Can a Transaction data be loaded into info objects. Appreciate if some one give a simple Definition of transaction data.
GSR

Hi,
You can probably do that but why would you want to do it? Transaction data is generally required for querying purposes and queries run best on multidimensional cube structure, not a flat structure.

In the tranformation i have deleted a rule for an info object material?

Hi all,
In the transformation i have deleted a rule for an info object material and then moved into quality. The number of columns is 10 after the material is excluded.
And the same transport moveed to production with warning messages.
the number of columns is 11 and it is not 10 when i check in the quality!!
Can anyone help me on this!!
thanks
Pooja

Hi,
As you said you removed the rule in transformation for an object (attribute) in matreila master data object.
Number of column/attrbute will remain same when you will see data in master data object (material). It is just the mapping from source is removed so you will not see any data in that attribute/column for whihc you have removed the rule/transformation.
For removing column you need to remove attribute/Info Object from Master data object (Material) attribute list.
I hope it will help.
Thanks,
S

How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors

Hi SAP Gurus,
Could you help me on this, How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors.
Regards
Mohan

Hi Ramakrishnappa,
If you clear the invoice against payment, then the invoice clearing date would be payment document posting date.
Regards,
Mukthar

Marriage anniversary date field for customer contact

Hi
We like to have Marriage anniversary date field for customer contact.
We found Birthday field & even Marital Status in Customer Contact. However, Marriage Anniversary Date is missing.
Please suggest whether it is already avalible somewhere? If yes, how to get it (in XD01/XD02), or what is the alternative then.
Thanks.
- Sunil

Hi,
I don't think SAP has provided marriage anniversary field , you can very well user REMARKS field to enter the details.
Regards,
Siraj

Showin a variable description for an info-object depending on a user login

Hi,
Client requirement is to show a variable description for an info-object depending on a user login.
e.g. a Characteristic Name is Level1 with a description as 'Level1'. If a user in Canada logs in and see a BEx report he should be able to see the description for infoobject Level1 as 'Cost center'. A user in US may wish to see the description as 'Expense center' etc. etc.
Is it possible to do so ? If yes please let me know ASAP.
Do not get confused with language dependant texts.
Regards,
K.Manikandan.

Hi,
I don't think it is possible through standard functionality, but maybe you could try a workaround.
Create a Characteristic (say COMP) with text, and compound it with Infoobject Level1. The values and description for COMP could be
US Cost Center
CN Expense Center
You could make COMP an Authorisation relevant object and check the same with regard to user login, so that the people of sepecific country see only description relevant to their COMP.
In the report Display COMP as Description and Level1 as Key.
But do not that compounding may have an impact on the performance, also look into the implications of the same if you need to do it for a large number of reports/objects.
Hope it helps.
Cheers
Anurag
......don't forget to assign points if it helps......

Wild Cards are not allowed for this info object

Hello Experts,
I am getting some problem, when I trying to find the some selections for info object in variable selection screen; it giving some error like u201CWILD CARDS" are not allowed for this info object.
I am trying to find the search item like this: TELENOR*
When I click on find button it is giving error.
Please any body help me in this matter.
Thanks & Regards
Prathap.

Hi,
You need to create a selections option variable on the characteristic that needs to be filtered.
After doing this, when you run the query, select the * from the dropdown box,and give the value.
Hope this helps u..!!
-Pradnya

Equivalent Data Field for 0EXRATEXACC Info Object

Similar Messages

Maybe you are looking for