Equivalent new tcodes in ECC 6.0

Hi
We have upgrade our system from 4.6C to ECC 6.0.
Can someone help us to find the new equivalent tcodes for the below tcodes in ECC 6.0.
SO80 - SAPfind: Free Text Retrieval Dialog
LD03 - Display Communication Document
SCUI - Communicate system status to SAP
We have gone thru solution browser, thru program where-used lists but could not find.
Any inputs on this will help
Thanks & Regards
Senthil

Generally a check against a users authorisation will take place when there is the ABAP statement AUTHORITY-CHECK in the code, along with the subsequent logic. Without this, you add what you like in SU24 but it won't make a difference.
If you want additional checks which are not coded in the program for your transaction then you need to modify the code. SAP provides user exits and enhancement points for this purpose - they let you put in your own validations in specific parts of programs without having to change standard code. If you want to include some additional checks then you need to speak to your functional consultant and development team to make the appropriate changes. Once these changes have been made and tested, you can update SU24.
As delivered by SAP SAP will often have some authorisation checks switched off for standard objects. You can see them in SU24 by status Do Not Check. You can often activate these checks by changing them to Check or Check Maintained (or proposal in recent versions)

Similar Messages

New tcodes in ECC 6.0 for obsolete tcodes in 4.6C

We are doing security upgrade from 4.6C to ECC 6.0.
There are some tcodes have been deleted in ECC 6.0, but I don't which new tcodes will replace them.
I am looking for the new tcodes in ECC 6.0 for list of tcodes in 4.6C (below) which have been deleted in ECC 6.0:
AL02, AL08, AL10, AL18, AL21, AL22, CN90, CN92, CN94, KSRP, SAPSAP_IA,
SB02, SO80, ST08, S_P9C_18000155, S_P9C_18000155
Note: i verify the table PRGN_CORR2 in ECC 6.0, and the list provides from OSS note 991377, however both of them not include those tcodes I mention above.
Your input with the new tcodes, that replace the tcodes above, will be appreciated.
Thank you
Steve

Hi,
This thread may help you with the required information.
Re: TCode set for ECC6.0 compared to 4.7
Rgds,
Raghu Boddu

New Tcodes in ECC 6.0

Plz provide if sum new TCodes are there in ECC 6.0
Thanks in advance
Regards

Go in Tcode SE11
Select "View" and enter "TSTC" then press display tab.
Then go in Utilities->Table contents->Display.
In Max no. of hits enter as 9999.
Then you will get all transactions in SAP.
Rewards if helpful.

New Tcodes for SD & FI modules in ECC 6.0

Hi Gems,
Are there any new tcode available for SD & FI modules in version ECC 6.0.
Can some please specify them? And also tell me what are the obsolete Tcodes/tables in ECC 6.0.
Thanks
Dany

Hi Gems,
Are there any new tcode available for SD & FI modules in version ECC 6.0.
Can some please specify them? And also tell me what are the obsolete Tcodes/tables in ECC 6.0.
Thanks
Dany

NEW Tcode for Subcontracting

Hello
Has anybody heard of the transaction code ME2ON(new Subcontracting functionality regarding the movement types for components) which is a new tcode for Subcontracting process where the movement types being used are 30A . Could any body tell me how the transaction works . This is as per the new version ECC 6.0 EP4 .
Thanks

Hi
In my knowledge there is no t.code like ME2ON. There is a new t.code Adsubcon for subcontract with special stock.
But you have to activate few (check in OSS) business sets in SFw5 for that. The below link will help you
http://help.sap.com/saphelp_di471/helpdata/EN/ed/ac8ec81bbc4bd5bc182a749f479765/frameset.htm
Regards
Antony

New functionality in ECC 6.0 with Enhancement Package 3

Hi Experts,
Can any one tell me what new functionality is added in Enhancement package 3 (ECC 6.0)?
Thanks & Regards,
Simar

Hi,
There no new functionality in ECC 6.0 for auto clearing of bank clearing account. Still you need to depend on Manual / Electronic bank statement to clear them.
Thanks
Prasada

New functionality in ECC 6.0 and problems during sap implementation

Dear Gurus,
may i know the details of the New functionality in ECC 6.0 on (MM,SD,PP,QM,PS,HR,PM,FI/CO,BI,XI,DMS ) or what is the problems coming at the time of implementation of ECC 6.0.
THANKS AND REGARDS
RS

Ritesh,
Question is bit confusing
may i know the details of the New functionality in ECC 6.0 on (MM,SD,PP,QM,PS,HR,PM,FI/CO,BI,XI,DMS )
That means you are going to upgarde from some earlier version .what is that version ?
Then you might find some specific information at
https://websmp102.sap-ag.de/uda -
>Upgrade Dependency Analyzer
what is the problems coming at the time of *implementation* of ECC 6.0.
If its a new implemenation you will not face problem , but you need to configure everything accordingly.
Problem depends upon what all you are using from standard and customizing.
Above provided link will help you.
Just add up
http://wiki.sdn.sap.com/wiki/display/ERPLO/NewfunctionalityinECC6.0%28+MM%29
Regards,

List of new tcodes in BI 7.0

Hello All,
we are planning to upgrade from BW3.5 to BI 7.0 , i want to know list of new tcodes which will be coming to BI envoirnment,
please tell me know what all are new tcodes, authorization objects,fields are coming to BI7.0 also i have run SU25 but i can not find RSECADMIN in any roles , please suggest where can i find all the new tcodes .
Thanks
DK

Hi DK,
please go through the links.
Re: TCodes and Tables
TCODE's in BI 7.0
Authorization - BI 7.0
Hope this helps u.
Thanks,
Sai Chand

Reg creation of new Tcode for d existing Tcode

Hi ,
i need to create new Tcode for d existing Tcode. For Ex. for abap editor Tcode is SE38.for dis i want to create a new Tcode like Z_se38.how can i do it.Plz explain me clearly.very urgent
Thanks in Advance

hi,
how to create a a T-code of that
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm38 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Rgds
Anversha

Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

Hi,
We are planning upgrade from 4.6C to ECC6.0 .Is there a table in SAP which contains old and new transaction codes? or is there any easy way to find obselete transaction codes and new Tcodes.
I also want to know the new tables added and replaced tables .Any
help is appreciated.
thanks
Venkateswara Rao Yeleswaram

Hi
Try this link, which will give functionality enchancements between different versions of SAP.
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Ramakrishna

New functionality in ECC 6.0 for auto clearing of bank clearing account.

Is there any new functionality in ECC 6.0 for auto clearing of bank clearing account.
Regards,
Kishore

Hi,
There no new functionality in ECC 6.0 for auto clearing of bank clearing account. Still you need to depend on Manual / Electronic bank statement to clear them.
Thanks
Prasada

What's new in SAP ECC version(Technically)

Hi ALL,
iam and ABAPer new to SAP ECC version.
can u post me th document related to SAP ECC version (what are the technical changes in ECC& Syntax change in ECC)
thank u

Hi,
Welcome to SDN!
In SE38, click the blue icon (Information) with the "I" in it.
Click "New Features in ABAP".
There should be a subfolder there which says "ABAP Changes by Release".
There is also a very good document from Thomas Jung here in the SDN
that contain a lot of hardcopies of the changes.
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Also, check the following threads:
Re: ABAP Changes for release ECC 5.0
Re: Technical difference between 4.7 and ECC 5.0
best regards,
Thangesh

New TCode for retention from purchase order

Hi
I am in SAP Ecc6.0 with EHP3. There is a new TCode in SAP for downpayment - ME2DP. For using this tCode, we have to give downpayment category in payment processing tab in purchase order.
Then we excute ME2DP. Similarly there is a Retention field in payment processing tab in purchase order. But i want to know the tCode where i can execute retention (as there is ME2DP for downpayment)
Edited by: Deepak Agrawal on May 12, 2010 3:18 PM

Meera,
Which version of SBO are you using 2005 or 2007?
I don't think Serial numbers can help in this scenario. There is no hard allocation or blocking possible using Serial numbers.
This is the Work around I am thinking about.
Set the items to be Batch Managed - On Every Transaction
When performing Goods Receipt, enter the Sales Order Number as the Batch Number
When creating the delivery, using SBO_SP_TransactionNotification we can easily check the Batch of the Item being selected and verify it with the BaseRef of Delivery lines to match with Sales Order number.
If the numbers don't match we can warn user with message, "The items batch reserved for Sales Order xyz"
Even if you make a mistake when entering the batch number same as Sales Order number when doing a goods receipt. It can still be traced and blocked during delivery.
Hint: The Batch table records the Goods Receipt transaction along with the BaseDocument number, Base Ref, etc
If you decide to go this route, I could help you further.
Let me know
Suda

New Tcode creation in Production

Hi
I have created query in tcode: sq01 in PRD server. Now i want to create new tcode say : zpp and i want to assign the program.
Whiel doing this in tcode: se93 , i have selected start object : program and selection screen, then system throwing error : changes to rpository objects are not permitted in the clinet.
To solve wat i have to do.
pl guide me. Is there any other tcode to create new tcode and assing the program.
warm regards
ssp

Production server should not be used for development.
Do the necessary developmet in Development server under a transport.(Create a transport through transaction SE10.) Release the transport and the task.Then move it to quality, then to production.

Migrating SU24 to new system properly (ecc 5.0 to ecc 6.0)

Hello,
We are currently upgrading from ECC 5.0 to 6.0. As part of this cutover to the new system, I need to download SU24 properly from the 5.0 system and upload it to the new 6.0 environment because we heavily use SU24 for custom tcodes and to add additional auth objects to SAP delivered transactions.
The good thing is that SU24 has a download capability in the transaction, but the problem is that it gives you three option of downloads, in which all three can be selected.
1) SAP Data
2) Original Data
3) Customer Data
I know that we will obviously want to use the "Customer Data" due to our Ztcodes, but what is the difference between SAP Data and Original Data?
Our goal would be to download and upload only our custom changes (to both custom transactions and SAP transactions), but we do not want to overwrite any newly delivered SU24 updates that SAP may have implemented in ECC 6.0.
Has anyone ever done this or does anyone have an idea what these mean? Of course, the SAP help is useless on this issue.
I looked for such messages and read them here, I guess I still have some anxiety about ensuring that I download only what my company has maintained since our older 5.0 system went live. If I download all of the "Customer Data" option, I think that covers all of our custom transaction codes, but will that cover the auth objects associations to SAP delived tcodes we have made as well?
Also, It seems that I will have to use SU25 to activate. Any information of the best way to to do this our situation would be greatly appreciated!
Thanks,
Ryan

Thanks for responding.
The thing is that the person asking the questions does not give a hoot about points until they have an answer, and then only maybe... so forget about points.
Answering questions with random links or wild guesses in the hope that one of them scores a few points makes a big mess of the forums and renders the search almost useless when all these link-farms turn up.
Take a look at this thread for an extreme example => work flow
It is okay to post a link when there is a good reason for it, embedded within a discussion or to support an answer as a reference.
Please take a look at this thread for a more detailed discussion => How Far it is Good???
Now, back to the discussion...
I am not logged on, but if I remember correctly there is a function module which uses combinations of these three flags to read the SAP data (current SU22 data), the original data (SU22 data without the "update" flag - because in the past SAP rolled out some support pack notes to change SU22 and some customers maintained SU22 anyway instead of SU24...) and the customer data (which is what you are looking for). Additionally the function module parameter has a 4th flag for when nothing is checked, and then it downloads everything (?). The name of the function was something like SU22LISTVALUES but you should be able to find it via the Object Navigator from the download screen - Menu => System => Status => double-click the GUI Screen program. I remember there being lots of comments in the coding as well to help understand it.
But this was some time ago and on a 4.7 system when I had looked into it, so please also check how many entries are downloaded and compare these to your USOBT_C and USOBX_C tables before you do anything like an upload... - as the download might not deliver information you are expecting (assuming that you ran SU25 after making changes or made some changes to SU22 without importing them via support packages, etc).
Let us know what you find. I will take a look in the next days as well when I find a system with some data in it...
Cheers,
Julius

Equivalent new tcodes in ECC 6.0

Similar Messages

Maybe you are looking for