Equuim P40-10X: WLan reception is very good but extremely slow

Hi
I have just bought a Equuim P40 - when I connect it to wireless broadband the reception is very good but it is extremely slow when it comes to load the pages from the internet - any suggestions as to how to rectify this ?
Thanks !

Hi
Its not easy to say why the notebook loads the webpages slowly.
Mostly the websites load slowly because of the big data amount.
If the pages use any flash animations or there is a big traffic on websites the serve could be overworked and the sites loads slower.
Also if the antivirus software is enabled and controls every data transfer the websites could loads slowly.
As you see, many different factors can affect the page loading!

Similar Messages

Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
also with the WLAN connection. My ISP has checked their side and everything is fine.
To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
o/s to W7-Ult.
Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
Thanks in advance to all and for any advice.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
Steam or the like causing interference.
I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
my Asus machine.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Face time was working very good but suddenly I can't make any call ! I have iPad mini

face time was working very good but suddenly befor 3 days I can't make or receiv any call. I have iPad mini iOS 8.1.3

Hi Sunlightbm,
Sorry to hear that you cannot make any FaceTime calls. If you have not done so already, take a look at the article below to go over some general troubleshooting to get it back up and working again. Check the settings on your iPad for things like Date & Time is set correctly to making sure your connection to the internet is good.
If you can't make or receive FaceTime calls
http://support.apple.com/en-us/TS3367
Take it easy,
-Norm G.

I have bought new i pad2 from singapore with 4.3.3 upgraded version. Working very good but suudenly 2 days back wifi signals started droping. Cannot connect wifi properly as comparitively my oth devices like iphone and pc's. please suggest what to do.

I have bought new i pad2 from singapore. Working very good but suddenly from last two days wifi signals started dropping. Having problem to get proper wifi signals even at my home as comparitively with my other devices like iphone4 and pc's. Please suggest some conclusion and tell what to do.
Thanks

Bikramvenus-
I believe an iPad 2 is still within the warrantee period. I suggest you contact Apple for advice on how to proceed. Since I don't know where you are, you can start by going to <Country> to select a different location. Then look for a Support tab and a Contact Us link.
Another alternative is to search for an iPad repair center. If you are lucky, there may be one in your city. I do not know what they might charge.
Fred

Please i have been using my macbook pro i5 and is very good but since i update it is slow to start up please what can i do

please after i have update my macbook pro i5 is now very slow to start up but after it has start iis working well

Information.
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup - Slow Boot
Startup - Slow Boot (2)
Startup - Slow Boot (3)
Do you have any external devices attached? If so, try disconnecting them.

VMWare installation seems good but deadly slow.

Please note: This question was specifically referred here by one of the moderators in the Windows 10 Insider forum. I am definitely computer literate so, if possible, I would appreciate an answer.
A VMware version of Win 8.1 ran briskly on my PC. My system uses a Core2 Duo at 3.6ghz with 3.2 GB of memory available. Since installing the preview, my interaction with Win10 has been OK, but it will take (for example) 20 or 30 seconds to generate
the Start screen after login. Clicking almost anything results in a 5 to 10 second lag. I have allocated 2 gigs of memory to the virtual machine.
Has anyone had a "brisk" experience with Win 10 on a virtual machine. Am I doing it wrong, or is this just the way the current version behaves on a VM?

Please note: This question was specifically referred here by one of the moderators in the Windows 10 Insider forum. I am definitely computer literate so, if possible, I would appreciate an answer.
A VMware version of Win 8.1 ran briskly on my PC. My system uses a Core2 Duo at 3.6ghz with 3.2 GB of memory available. Since installing the preview, my interaction with Win10 has been OK, but it will take (for example) 20 or 30 seconds to generate
the Start screen after login. Clicking almost anything results in a 5 to 10 second lag. I have allocated 2 gigs of memory to the virtual machine.
Has anyone had a "brisk" experience with Win 10 on a virtual machine. Am I doing it wrong, or is this just the way the current version behaves on a VM?
I use windows 10 9926 with Virtualbox. My system use a i5 qwith 4 GB of memory available.
After some days there is always 100% cpu and i can't use the system

MSI RS480M2 - works good - but not perfect ;)

Hi ! I got a problem with my mainboard. I read that if i want to use Win 2000 (I got license so I didn't want to change my OS) I have to setup bios for SATA (RAID), to avoid pio mode error in win2k IDE driver. Of course it works very good, but.. the problem is when I use SATA mode - the bios splash (POST procedure) takes very long time. How to speed up POST procedure in SATA mode ?? In PATA mode POST takes 2-3 seconds - in SATA 15-20s. And the second question is ... how can I use SATA mode in WinXP x64 (I got 120 days beta from MS webpage) - there is no driver on ATI disk for x64. Is it possible ?? Now I'm doing bios setup to change from SATA (in w2k) to PATA (in XP64) everytime I want to boot. Is WinXP64 compatible with SiI SATA without drivers ? What do you think ?

If you explore the download packages, there's a MakeDisk.txt with the following instructions on buidling the floppy:
If you lost your Driver Disk labeled as "Silicon Image SATA RAID Drivers"
This file will teach you how to make one Driver Disk
First please perpare one formatted 1.44M Floppy
Then please copy necessary driver from MSI Driver CD
- Driver for Win2000/NT40/XP/2003
Please copy CDROM:
ATI\RS480\SBDrv\SATARAID
si3112r.cat file
Si3112r.inf file
Si3112r.sys file
SiiSupp.vxd file
SilSupp.cpl file
SIWinAcc.sys file
TxtSetup.oem file
Danno

Which has better WLAN reception: E51 or E61i

i was astonished with the great wlan reception auality of the E51 (compared to the weak n80ie w could not detect any wlan while same time e51 detected 3 networks!!!!?????)
and i wonder if the e61i have the same good wlan reception as e51 or better or worse??
i prefer the e61i to buy but i am afraid of its wlan reception quality being a dissapointment as my n80
i would be grateful if somebody help me

Most Nokia Wlan enabled phone uses the same WIFI(rcvr/trxtr) chips, it's the placement of its antenna & facia of the phone that hampers the transmission & reception!
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

TV (video) output from new nano looks very good!

Just a comment for those who may be wondering how the video quality on the new iPod nano looks when output to a TV. I have one of the old iPod AV docks with the s-video port and the new nano seems to work fine with that combination (using a standard s-video cable between the dock and the TV). Thus far I'm really impressed with the video quality, I can't see a single problem, the color is good, the quality and sharpness is as good as I've seen from any iTunes Store content, and as far as I can tell the frame rate is fine (no stuttering, skipped frames, or problems with audio sync). I'm amazed that such high quality video can come from such a small device. If it continues to look this good (after viewing more content and after more testing) then I think Apple may have "hit one out of the park." This thing could turn out to be the most popular iPod yet (if you have any interested in video and still want a small device).

I just found out that the video out (TV) on the new nano supports video playlists so you can create playlists for back-to-back display on the TV. Not even the AppleTV will do that (even though the latter has been a highly requested feature for the AppleTV since day one). In fact, if you can do without the on-TV menus you may find that the nano is a better video output device than is the AppleTV (that is, the menus system on the nano doesn't appear on the TV output).
Also, I just competed a few hours of video playback to my big-screen TV from the nano and I'm still impressed. No video problems at all, looks very good considering the quality limitation from the content that is currently on the iTunes Store (limited to standard definition, no HD movies, HD TV, or HD music videos as yet).

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

When ever I launch my safari, it will stay on for about a minute and then quits on me. It has a "safari quit unexpectedly" dialog box with a bunch of codes that I can send a report to apple. im not very good with this kind of thing, plz help!

Im not very good at troubleshooting, but I have played around with the system preferences. My airport connection is fine as well as the ethernet. Firewall says its not connected, (im not sure if that matters or not?)
I have subtracted my network from the list, restarted, and then put it back and and restarted...nothing seems to be working. Iam in the middle of a correspondace course and i really need my internet back...any suggestions would be greatly appreciated!
Thank you

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Then GULP, check for this...
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

For that model, Epson has this information:
ICA Scanner Driver
07/17/12
Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
1. Connect the all-in-one or scanner to your Mac and power it on.
2. Select the  menu, then Software Update.
3. Follow the on-screen instructions to install the available updates.
Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
Compatible Systems: Mac OS X (v10.8.x)

I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G. All the settings on the iPad are correct. It just shows that it's searching for a signal. I'm in an area where my signal (pre OS8) was very good in strength. Please help!

I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G. All the settings on the iPad are correct. It just shows that it's searching for a signal. I'm in an area where my signal (pre OS8) was very good in strength. Please help!

Hello Jpahlphoto!
I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
Please restore your iPad and see if that does the trick. You'll find the steps here:
http://bit.ly/16hQAlr
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distress

If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

My ipad 2 is not very good picking up wi-fi signals

MY IPAD 2 is not very good at picking up wi-fi signials .I have a Kindle Fire and it has no problems in the same location .Is this a normal limitation for the IPAD or do I need a fix

labyrinth 2
It's possible it's that app that's the culprit.
Try syncing your apps but deselect the box next to labyrinth 2 in iTunes. Or, delete the app directly from the iPad by holding down the app until it jiggles then tap the circle with an x, then tap Delete. Press the Home button once or twice to stop all the icons from jiggling. You can always re sync the app using iTunes.
Then restart the iPad.Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
See if the screen will rotate.
If that doesn't help, try, "Reset All Settings". General / Reset. Tap Reset All Settings. That resets preferences and settings to default but contacts, calendars, and media won't be effected.

Equuim P40-10X: WLan reception is very good but extremely slow

Similar Messages

Maybe you are looking for