Erase all files from OSX 10.6.8

I'm giving my old MacBook to my daughter but want to erase all files, history - everything except programs. How do I proceed?

First backup all Applications on a USB drive. Connect it to the Mac; open the Finder and browse it to /Applications. Select all and CMD+C. Open your drive and CMD+V. Then insert the Mac OS X Installation DVD in the Mac and switch it off. Boot it pessing C and from Disk Utility format your drive. Then reinstall Mac OS X and copy the Applications from the Drive to the /Applications folder.

Similar Messages

Is there any way to erase all files from a broken macbook without switching it on??

My macbook air died when I stupidly spilled nail polish remover over the keyboard- this was actually about two years ago and for various reasons I've only just gotten round to figuring out the best way to dispose of it. The problem is that it no longer switches on at all (and doesn't charge either), so I have no way of erasing my files and personal information and I'm just not comfortable recycling it knowing there could still be stuff stored on there. Does anyone know of a way to wipe the memory without switching it on, or have any suggestions for what I can do with it otherwise?

1. Click here and follow the instructions; if you have a different MacBook Air model, see the links at the bottom of that page.
2. Put it in an enclosure(any large enough computer store should have them) and erase it, or just keep the drive.
(112851)

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

How to make button to format a HardDrive or USB, How to remove all files from folder, and How to delete a process in listbox with a textbox?

Hello!
Here's the question with explaniation: How can i format the USB or Drive by clicking a button what's meant for it?
and the second question what's also in vb.net: How can i remove all files from folder ?
Here's the Look of program: *
Using the PC button, it will delete the free space of the PC, do you guys/girls know where it's location?

Example Code:
Imports System.Runtime.InteropServices
Imports System.IO
Public Class Form1
Dim CBoxDrives As New ComboBox
WithEvents FButton As New Button
<DllImport("shell32.dll")> _
Private Shared Function SHFormatDrive(ByVal hwnd As IntPtr, ByVal drive As UInteger, _
ByVal fmtID As UInteger, ByVal options As UInteger) As ULong
End Function
Private Enum SHFormatFlags As Integer
SHFMT_ID_DEFAULT = &HFFFF
SHFMT_OPT_FULL = &H1
SHFMT_OPT_SYSONLY = &H2
SHFMT_ERROR = &HFFFFFFFF
SHFMT_CANCEL = &HFFFFFFFE
SHFMT_NOFORMAT = &HFFFFFFD
SHFD_FORMAT_FULL = 0 ' full format
SHFD_FORMAT_QUICK = 1 ' quick format
End Enum
Private Sub FButton_Click_1(sender As System.Object, e As System.EventArgs) Handles FButton.Click
If CBoxDrives.Text = "" Then
MsgBox("No Drive Selected")
Exit Sub
End If
Dim Iresult As ULong = SHFormatDrive(CType(Me.Handle.ToInt32, IntPtr), CUInt(Asc(CBoxDrives.Text.Substring(0, 1)) - Asc("A")), CUInt(SHFormatFlags.SHFMT_ID_DEFAULT), 1)
End Sub
Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
Me.Size = New Size(200, 100)
With FButton
.Size = New Size(50, 25)
.Location = New Point(5, 5)
.Text = "Format"
End With
Me.Controls.Add(FButton)
With CBoxDrives
.Size = New Size(50, 25)
.Location = New Point(75, 5)
.DropDownStyle = ComboBoxStyle.DropDown
End With
Me.Controls.Add(CBoxDrives)
Dim DrivesFound As Integer = 0
Dim allDrives() As DriveInfo = DriveInfo.GetDrives()
Dim d As DriveInfo
For Each d In allDrives
If ((d.DriveType = DriveType.Fixed) Or (d.DriveType = DriveType.Removable)) AndAlso Environment.GetEnvironmentVariable("SYSTEMROOT").StartsWith(d.Name) = False Then
CBoxDrives.Items.Add(d.Name)
DrivesFound += 1
End If
Next
CBoxDrives.SelectedIndex = DrivesFound - 1
End Sub
End Class

How do I move all files from an old PPC to a new Mac Mini?

How do I move all files from an old PPC to a new Mac Mini?

The new mini has a Firewire 800 port. Likely the PPC version only has Firewire 400. The OP will need a converter cable which is why I was asking first about what hardware is available and how much is being copied.
Probably go with using the external hard drive if you decide all you want are data files.
If you want to migrate:
Kappy: A Basic Guide for Migrating to Intel-Macs - http://discussions.apple.com/message/10257343
Mac OS X 10.3, 10.4: Transferring data with Setup Assistant / Migration Assistant FAQ - http://support.apple.com/kb/HT1554
Setting-up a new Mac from an old one or its Backups - http://web.me.com/pondini/AppleTips/Setup.html

How can I create a array with all files from a directory

How can I create a array of files or varchar with all files from a directory?

I thought the example could be improved upon. I've posted a solution on my blog that doesn't require writing the directory list to a table. It simply returns it as a nested table of files as a SQL datatype. You can find it here:
http://maclochlainn.wordpress.com/2008/06/05/how-you-can-read-an-external-directory-list-from-sql/

HT1386 My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?

My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?

http://www.wideanglesoftware.com/touchcopy/index.php

I had a computer crash and completed a Fresh install of Win7 and restore of all files from Carbonite. I have managed to get LR 5 running in LR. However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have

I had a computer crash and completed a Fresh install of Win7 and restore of all files from Carbonite. I have managed to get LR 5 running in LR. However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have a complete inventory of all my catalogs.

<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>

Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
How did you import the photos to iPad and iPhone?
If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
See this document: http://support.apple.com/kb/HT4236
You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
Save photos to your computer using iTunes
Connect your iOS device to your computer.
Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
Select all the photos in an album or event: Tap All.
In iTunes, click the button for your device and click Apps at the top of the window.
Below File Sharing, select iPhoto (in Apps).
Select the Shared Photos folder under iPhoto Documents.
Click Save To and select the location on your computer where you want to save the items.
To view your photos, go to the Finder and look in the location you selected above.

I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

You could try Paragon HFS+ for Windows. That would allow you to read and write files from a Mac-formatted drive.
Clinton

In CS 5 I am able to open all files from Bridge but is PS CC I can only open .tif files

In CS 5 I am able to open all files from Bridge but in PS CC I can only open .tif files, all other files I get file not found. What is wrong?

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/bridge
http://forums.adobe.com/community/photoshop

Batch file extracting all files from nested archives

I have managed to leverage a powerful
forfiles command line utility with the mighty
7z compression program.
Below is a simple batch file extracting all files from nested archives hidden at any depth inside other archives and/or folders. After the extraction each archive file turns into a folder having the archive file name. If, for example, there was an "outer.rar"
archive file containing nothing but an "inner.zip" archive with only "afile.txt" inside, "outer.rar" becomes "...\outer.rar\inner.zip\afile.txt" file system path.
@echo off
rem extract_nested_archives.bat
move %1 "%TMP%"\%2
md %2
7z x -o%1 -y %TMP%\%2
del "%TMP%"\%2
for %%a in (zip rar jar z bz2 gz gzip tgz tar lha iso wim cab rpm deb) do forfiles /P %1 /S /M *.%%a /C "cmd /c if @isdir==FALSE extract_nested_archives.bat @path @file"
ARCHIVES ARE DELETED DURING THE EXTRACTION! Make a copy before running the script!
"7z.exe" and "extract_nested_archives.bat" should be in folders available via the %PATH% environment variable.
The first parameter of extract_nested_archives.bat is the full path name of the archive or folder that should be fully expanded; the second parameter is just the archive or folder name without the path. So you should run "c:\temp\extract_nested_archives.bat
c:\temp\outer.rar outer.rar" from the command line to completely expand "outer.rar". "c:\temp" must be the current folder.
Best regards, 0x000000AF

Incredibly useful! Thank you so much. I did make a couple of small changes to make the script a little easier to use from the end-user perspective.
First - I don't like making the user input the redundant second parameter, so I added this snippet which extracts it from the first parameter. The first line of the snippet enables delayed expansion so that special characters in our file name don't
break anything. The second line pulls the parameter into a variable, and the 3rd line uses delayed expansion on that new variable. Before implementing delayed expansion I had problems with file paths which included parentheses.
SetLocal EnableDelayedExpansion
Set SOURCE=%1
For %%Z in (!source!) do (
set FILENAME=%%~nxZ
set FILENAME=%FILENAME:"=%
Anyway once that was done, I just used %FILENAME% everywhere in the script instead of
%2 (making sure to correct quotes as needed)
This way, to run my script all you need to run is:
C:\temp\extract_nested_archives.bat C:\temp\Archive.zip
Second - I didn't want to modify the Windows environment variable. So I replaced
7z with "%PROGRAMFILES%\7-zip\7z.exe"
I also replaced extract_nested_archives.bat with "%~f0" (which represents the full path+filename of the current script).
Here is my full script now. Tested on Windows 8 with the 64-bit version of 7-zip installed:
@echo off
Setlocal EnableDelayedExpansion
Set source=%1
For %%Z in (!source!) do (
set FILENAME=%%~nxZ
set FILENAME=%FILENAME:"=%
move /Y %1 "%TMP%\%FILENAME%"
md "%FILENAME%"
"%PROGRAMFILES%\7-zip\7z.exe" x -o%1 -y "%TMP%\%FILENAME%"
DEL "%TMP%\%FILENAME%"
for %%a in (zip rar jar z bz2 gz gzip tgz tar lha iso wim cab rpm deb) do (
forfiles /P %1 /S /M *.%%a /C "cmd /c if @isdir==FALSE "%~f0" @path @file"

Can't copy all files from a CD-R

I have a number of CD-Rs of family photos. I made the disks on a Dell PC with a horizontally mounted CD-RW Drive in 2005. I recently tried to load them onto my iMAC, but I could only copy about half of the files before the drive hung-up. The drive would often make noise and then slow to a near inaudible crawl and then say the file(s) could not be copied.
I was able to copy the missing files to a memory stick at a local library on an HP PC with a horizontally mounted drive, so the disks are OK. Interestingly, I had trouble with the disks at a library with iMAC-like HP PCs, i.e., all-in-one monitor/pc/optical-drive with a vertically mounted drive.
Other drive-related problems: (1) friends have trouble playing Audio CD-Rs I've made for them, (2) I can't copy a DVD-R with MackTheRipper (PowerPC), the DVD-R plays fine.
Is this a drive issue, a drive orientation issue, or something else?
Thanks for your help.

Hi all. I am trying to copy all files from a flash: on a CME to a
usbflash drive. I am able to do so, but only one at a time. Is there
a away to copy all files at one time so I dont have to name them
individually when copying all of them over? Thanks.
Check out the below link hope to help !!
https://cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml
Ganesh.H

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene

Already deleted all files from my MINIMAC and still appears to have only 200 gb free. How do I format the macmini?

Already deleted all files from my MINIMAC and still appears to have only 200 gb free. How do I format the macmini?

If you deleted from within the OS, did you empty the Trash?

Erase all files from OSX 10.6.8

Similar Messages

Maybe you are looking for