Erase data from open hub destination data service
Hi,
I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
The error given is the following:
Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
Message no. RSM077
Diagnosis
One or more DTP requests have already updated the request.
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
Thanks.
Hi,
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Follow the same steps above , that means delete the requests from the Cube Zrappel.
right click on the cube -
> Delete Data
now the syatem will promt you asking
Do you want to delete the content of data target Zrapple ?
say yes for it .
hope this will solve your problem
santosh
Similar Messages
-
Program or Function module to delete data from Open Hub Destination Table
Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay KumarYou can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder -
Getting data from Open Hub Destination Table
Hi,
I've created InfoSpoke and as a Target I've used Table. Now I want to get to data in this table from R/3 side. Any idea where this Table might be stored and how can I get to it?
Thanks in advance!
Regards
Wojtekhi,
is the table is in R3 side?
chk the application component name give in the infospoke definition.
if the table name is known then chk out in se11/se12/se16 in R3.
Ramesh -
To view the data in open hub destination
Hi all,
Can anyone help me out how to check the data in open hub destination file.
These are the details:
Destination: File
Type of file : Logical file
Application Server file name : XXXXXXX
If it was file name, i know it has to be checked in AL11 with directory name and file name.
Here its a logical file name. Which is the directory corresponding to this?
Thanks,
tinkugeoHi,
Question: "Are all the logical files are saved in the home directory DIR_HOME?
Please correct me if I am wrong"
Ans: When you create an Open hub destination using Physical file, the file will get created in DIR_HOME directory (by default) in AL11
And for locating the physical path in AL11. Go through the below link. it gives ans to all your ques
http://bx.businessweek.com/sap/view?url=http%3A%2F%2Fweblogs.sdn.sap.com%2Fpub%2Fwlg%2F17370
Edited by: kumkum basu on May 20, 2010 8:20 AM -
How to delete data from Open Hub DB table when the DTP is inactive..
Hi Gurus,
I am transporting some 2LIS extractors to QA with some enhancements.
The data goes to an OHD ( third party ) pulled by a process outside SAP enabled by a BAPI.
Now , By mistake , I imported the OHDs with still some old left in the DB table of OHD ( /bic/oh<>)
It's not allowing to me do manual activation and also DTP is inactive ( cannot do a delta DTP and make no of records zero )
I want to delete the data in the OHD DB tables ..any clues....
Thanks,
ChetanHi Chetan,
The OHD table name is usually /BIC/OH<OHD-name> . You can find it in the OHD definition.
Go to transaction se14, give the table name and say edit.
Select Delete Data and say Activate and adjust database.
This will delete the entire contents of the OHD DB table.
Regards,
Uma Maheswari -
Data Extraction in Open Hub Destination using Process Chain
Hi
I want to extract data in Open Hub Destination (database table)from Data Store Object(ODS) through Process Chain.
When i tried to create process chain, i found only one option under Process types - Data export into External System. Here it asks for Infospoke instead of Open Hub Destination.Michael is correct and below is the rationale...
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/58e1cdbed430d9e10000000a11466f/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/58e1cdbed430d9e10000000a11466f/content.htm</a>
<b>Integration</b>
You can use the data transfer process to update data to the open hub destination. The data is transformed in this process. Not all rules types are available in the transformation for an open hub destination: Formulas, reading master data, time conversion, currency translation and unit conversion are not available.
Hope it Helps
Chetan
@CP.. -
Hi,
In our project we have Client Instance (eg: BWPD) and Application server (eg: BWPRD) defined for load balancing.
We have created open hub and assigned destination server BWPD.
When i execute the DTP manually in BWPD, it runs succesfully.
However, the same DTP when placed in the process chain fails with error message :
No Such File or Directory
Could not open file D:\usr\sap\BWPD\A01\work\Material on application server
Error while updating to target ZXXXX.
Options Tried:
Schedule process chain in the background server BWPD (same server which has been mentioned in Open hub dest) still DTP failed.
Tried with Application server it failed.
Tried with HOST as option it failed.
couldn't make out what is going wrong. Any thoughts ?
Regards.Hi there,
found that doc quite useful.
Maybe could shed some light to your issue.
[Creating Open Hub Destination using a Logical file to extract the data|Creating Open Hub Destination using a Logical file to extract the data]
Also, what OS do you have?
is the Syntax Group accordingly created ? -
Convert Info Sopke to Open Hub Destinations
Hi,
We have an requirement to convert Info Spokes to Open hub destinations.
Is that possible or should we recreate it in open hub destination ?
Regards,
Elango MurugesanHi,
Please go through below link. It guides you the way to do it.
InfoSpoke -&gt; Open Hub Destination, Data Transfer Process - Technical Operations Manual for SAP NetWeaver - SAP Li…
Thanks, -
How to export data from ODS through Open hub destination ?
Hello Expert,
I ahve some data in ODS.I want to export that data to some thirdt party application through Open Hub destination .How will I do that ??
Eary reply is appreciated .HD IS :
1.DATASOURCE
2.INFOSOURCE
3.DATASTORE OBJECT
4.INFOCUBE
5.INFOOBJECT
1.Assume that info cube existing with data
2.Create openhuB services
GO FOR OHD---->select Any info area ->CONTEXTMENU>Create OHD
Give the 'OBJECT NAME'----Continue
In OHD Destination type Depends upon 3 types
1.DB-TABLE
2.FILE
3.THIRD PARTY TOOL
3.Go for the Defination Tab give the File name
4.Create Transfermations
5.Create DTP
OPEN HUB SERVICES WITH -
INFOSOURCE:OHD---DB TABLE SPECIFY:/BIC/OH
1.Assume that info cube existing with data
2.Create openhuB services
GO FOR OHD---->select Any info area ->CONTEXTMENU>Create OHD
Give the 'OBJECT NAME'----Continue
3.Select Dbfile----->Continue
Select file location where you want to store file .
O.Semantic key
4.Create Transfermations
5.Create DTP
Regards ,
Praveenyagnamurthy. -
Open Hub fetching data from Change log table
Hi Gurus,
I have a scenario where in I have an Open Hub destination whose source is a DSO, and we are sending data into SAP Data services. We found that the data being sent is from the change log table. Is this how an Open Hub with DSO as a source works ? Or is there any possible way we can send data from the Active table of the DSO, when the DTP is run.
Kindly help. Thanks in advance !
Regards
SnehithHi,
For Extraction from the DataStore Object, we have the following options for Delta init Extraction:
Active Table (with Archive)
The data is read from the active table and from the archive or from a near-line storage if one exists. You can choose this option even if there is no active data archiving process yet for the DataStore object.
Active Table (Without Archive)
The data is only read from the active table. If there is data in the archive or in a near-line storage at the time of extraction, this data is not extracted.
Change Log
The data is read from the change log of the DataStore object
We can select any of these options for data trasnfer.
Regards,
Geetanjali -
Use of Open Hub Destination to load data into BPC
Hi Gurus,
I want to load the data from SAP BI to BPC (NW version), using Open Hub Destination. I want to know few things about this.
1) What method should I use? Should I use Destination as Flat Files or Database tables? If Database tables, how can I use this data in the tables in BPC?
2) If I go for Flat Files, which is saved in the application server of BI, how can I import those files to BPC and use it using Data Manager?
3) Also, in case of Flat Files, there are two files which are created. One is the control file and other one is the data file. How can I use both of them? Or can I just use data file without header?
Your replies will be much appreciated.
Thanks,
AbhishekHi Anjali,
I can use the standard data manager package from BI to BPC, if the CSV file is available in the BPC Server or in case if I am directly extracting from BW object, InfoObject or InfoCube.
But, since I will be using Open Hub, the output of this can be in a Database Table or a CSV file, preferably in SAP Application Server. In such cases, how can I use the Database table or CSV file in the standard Data Manager Package?
Thanks for your reply.
Abhishek -
Data selection in new Open Hub destination Vs Infospoke
In BW 3.5, we can use T code RSBO to create Infospoke, In the selection tab, we can use any infoobject in the source infocube as the data filterfor the infoSpoke, e.g I can set company code as 1002 etc, while in the new BI 7.0, Open Hub Destination, where I can achieve the same by set the filter for a specific infoobject in the source cude?
Edited by: Jianbai on Mar 29, 2010 11:49 PM
Edited by: Jianbai on Mar 29, 2010 11:51 PMFor Open Hub in BI7 we are creating transformation and DTP. The same resrtiction you can give in DTP (activate it after change).
-
Multiple data sources to open hub destination ??
Hi,
Is it possible to assign multiple data sources to open hub destination?
At present we are FTP'ing a file to users. Users need one more field added to this file. The information for this field belongs to another ODS. I checked the infospoke but it does not accept multiple data sources.
Any ideas?
Thanks!
Edited by: BI Quest on Sep 4, 2008 8:12 PMYou can create multiple transformations for open hub destination. Create destination of open hub destination to be file on application server and then use transfer mechanism to transfer files to desired destination.
Regards,
Pravin Karkhanis. -
In the info-spoke definition, is there a way to make filter values dynamic in the 'Selection' tab. For example, we have an info-spoke that we extract data to monthly - by fiscal period. Since the Production instance is a closed system, we cannot change the filter value directly in Production, but would have to change it in Development and transport it up to Production. I have read in some SAP documentation that there is a plan to have variables available as selection criteria but it was not mentioned when this would be available. Thank you for your help.
Hi Celine,
Why you want to change the selections.... why cant you use delta...?
If you want to do selection accourding to ur fiscal year create a BADI and create a variables from system data. and restrict according to ur selection.
for more info check at www.service.sap.com/bi -> infoindex -> O(Open hub destination).
I hope this helps.
Srini -
Open Hub Destination - From BI7 to R/3 error
Hi All ,
I am in the process of transferring infocube data from BI 7.0 to R/3.
I created an open hub destination with third party . Once I execute the DTP , i get an
error message
CREATE DATA : The specified type /BIC/OH**** id no valid data type.
The RFC connection between both the systems is in place .
Please guide me where i am going wrong.
Any help is highly appreciated.
Thanks & Regards,
Anjna GoyalHi,
Set the correct parameters in case of other Systesm i.e. external system, see the below articles on Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy
Maybe you are looking for
-
Runtime Error when accessing KM Content
Hi Everyone, I am getting Runtime Error when accessing KM Content through Content Administration/KM Content. See the below error information. Runtime Error An exception occured while processing the request. Additional information: String index out of
-
Is there any Link between BNK_MONI and DMEE
Hi , I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI . I am running following seq
-
Dear all, Anyone knows if it is possible in documents items generated in T. code ASKBN to set the 'movement type' (COBL-RMVCT) according with the original asset accounting document and not according to customizing. I need to know this because we hav
-
SapScript 'MAIN' Window without 'Text Element'
Why is it, if we run 'MAIN' Window without defining 'Text Element'(/E), it displays the contents twice.. The same doesn't happens with other 'Variable' windows..
-
Submit a af:subform from outside the subform
Hi friends, Can you tell how can i submitt the subform on button click from outside the subform . Event submitting the individual inputText or selectOneChoice will work , only thing is the button is outside the subform. This is to stop the validation