Erase tool not working-possible tablet problems?

Bear with me guys, this may be simple but I can't remember. I just upgraded from 2 to 4. I used my magnetic lasso and did a layer via cut. Discarded the background but want to do some additional erasing on edges. Block works but not brush. I am using a mouse with a pen tablet. Once before I went into options to disable my tablet but when I go into tablet or more options under brushes it only offers the new ones like scatter etc. Anyone?
Thanks, Kimberly

Kimberly, there was another thread in the last week from someone who was
having similar problems. They wound up contacting Wacom, who were helping
resolve the problem. You might want to search for that thread and see if it
has a solution for your problem as well.
Chuck

Similar Messages

  • Photoshop CC 2014 Background Eraser Tool Not Working

    I downloaded the CC 2014 update last week for all of my Adobe products. I've had no trouble with them except for the background eraser tool in Photoshop.
    I open a photo and try and erase the background (all of the same settings as I used before) and it's really laggy. You can't drag the eraser, only erase in single points. I have found that by using the standard eraser first, then the background eraser, it will work for about 40 minutes, before stopping again. I then have to restart my computer to get it to work again.
    As you can imagine, this is really frustrating. I can't figure out why it's doing this, and neither can my company's IT department. It's not maxing out the RAM or peaking the CPU, so they're pretty sure it's an issue with PS.
    I have tried uninstalling, running the CC Cleaner tool, and then re-installing, but that hasn't fixed it.
    Is anyone else having this problem? How did you fix it?
    Emily

    Adobe finally admits that this issue is a known issue. They tried to blame it on an outdated graphics card driver (see above), but mine was current. After I headed off all of their illogical excuses, one by one, they finally sent me an email stating the issue is definitely on their end and they were able to replicate it on their end - contrary to a previous email in which they attempted to shift blame on my end. I have to say Adobe gave all appearances that they are dismissive and in denial about it - until today. Once again, they escalated the issue (Level 2 - whatever that means). I'm not holding my breath. Thoroughly frustrated with how Adobe refused to take ownership of this until I had them corralled. And yes - I did let them know I was not pleased. Very disappointed with Adobe support. I invested a lot of time in previous support sessions, and the issue is still not resolved.

  • Cs6 issue with still frame duration setting not working, possibly yosemite problem

    Hi, I moved my project over to my iMac, which I updated to Yosemite awhile back. Suddenly the frame duration for stills setting defaults to 5 even though it is set at 2 for my animation project. What gives?
    I just bought my master collection two years ago and spent a pretty penny. There were updates for the Mavericks update but none for Yosemite? I think there need to be and people spend too much money on these products for the support option to be so skimpy.
    Hopefully someone answers this issue with a solution. Otherwise, I will not speak highly of Adobe.

    As suggested by someone on a different forum, I tried downgrading the firmware to 7.6.1. By doing so, the problems disappeared and WPA2 only mode works correctly. I will file a bug report with Apple.

  • Creative cloud photoshop blur tool not work as it should be

    creative cloud photoshop blur tool not work as it should be !
    I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
    and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
    I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
    at least it not bluring enough to see any major changes.
    the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
    (note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
    just need advise not to share system specs.
    and thats what this forums board is for getting advice and read what others say about the issue at hand.
    it's not to post or share system specs  !!!
    so with that out of the way I need advice only please ?

    Hi,
    It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
    If you zoom to 100% do you see any change when using the blur tool?
    What are the pixel dimensions of the image?
    (Image>Image Size)
    If you try a small image, does the blur tool work?
    What about when you use the mouse instead of your tablet?
    Can you at least tell us what operating system and version of photoshop your using?

  • Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

    Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
    -CharlieH23

    Copy and paste only this area, you may have to scroll down.
    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2494 MHz
    Built-in memory: 6019 MB
    Free memory: 3360 MB
    Memory available to Photoshop: 5227 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 1.2
    OpenGL Version: 2.1
    Video Rect Texture Size: 16384
    OpenGL Memory: 2112 MB
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics 4000
    Display: 1
    Display Bounds: top=0, left=0, bottom=768, right=1366
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics 4000
    Driver Version: 10.18.10.3958
    Driver Date: 20140930000000.000000-000
    Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
    Video Mode: 1366 x 768 x 4294967296 colors
    Video Card Caption: Intel(R) HD Graphics 4000
    Video Card Memory: 2112 MB

  • Converting WordPerfect to PDF with desktop printer tool: Not working

    I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

    Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
    Please help again and soon, :).
    Date: Tue, 7 Jan 2014 11:52:08 -0800
    From: [email protected]
    To: [email protected]
    Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
        Re: Converting WordPerfect to PDF with desktop printer tool: Not working
        created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
    Please do following
    (A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
    Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
    (B). If you have not installed Adobe Postscript driver yet then please install one as below:
    How to Install PS printer:
    1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
    2. Select "Add a local printer"
    3. Select "Use an existing port: LPT1: (Printer port)
    4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
    Adobe PS driver files:
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
    (C) Go to the printer configure port and verify your Adobe ID and password
    1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
    2. Click right mouse to open “Printer properties”.
    3. Select “Ports” tab
    4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
    5. Click “Configure Port…” button at the bottom
      http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
    When printing to PDF you will see below and an email is delivered to your email inbox.  The converted PDF file will be stored at https//files.acrobat.com.
      http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
    Thank you
    Hisami
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Content aware move and extend tool not working in PSE12

    Photoshop Elements 12 content aware move and extend tool not working with Yosemite upgrade.

    Have you deleted the preferences and the saved application states?
    A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

  • CS5 Refine Edges tool not working how its suppose to

    Hello everyone - well I like the title says refine edges tool not working right -
    I open an image in photoshop - make a quick selection of a part of the image and then go into refine edges - Click on smart radious and when I use the brush to get a better selection that part becomes transparent - I tried seaching everywhere for an answer but noone seems to know
    Thank you

    Could you please post a screenshot with the pertinent Panels visible?
    The videos you might have seen might simply be using images that lend themselves to the task better than your image.

  • Adobe XI - Hightlight text tool not working

    Just downloaded adobe XI and the hightlight text tool not working.  How can I get this to work.

    I guess you can always use the box tool in drawing markups to draw a box around the text then play with the colors until you get close to what you want.
    The only thing I don't like about that (besides it being a PITA) is that it covers the text with color as well where the highlight tool does not.

  • Shape Builder tool not working on shapes in a clipping mask

    Hello again,
    Why is the Shape Builder Tool don't work on shapes inside a Clipping Mask? The Pathfinder does work but for the Shape Builder Tool: NADA!
    Thank's for answering,
    Lindberg

    Hi,
    Thank you for answering. No it will work correctly. The Pathfinder work inside a clipping path and in any situation but not the Shape Builder Tool. Unless this is normal, I think that the specialist at Adobe should have a look at this annoying behavior and try to release an upgrade with this behavior corrected in a near futur.
    Thank’s again for answering,
    Robert Marchand
    [email protected] <mailto:[email protected]>
    Le 8 avr. 2015 à 10:41AM, Larry G. Schneider <[email protected]> a écrit :
    Shape Builder tool not working on shapes in a clipping mask
    created by Larry G. Schneider <https://forums.adobe.com/people/LarryG.Schneider> in Illustrator - View the full discussion <https://forums.adobe.com/message/7418340#7418340>
    If you release the Clipping Mask and try the Shape Builder tool then, does it still balk at making the shape?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7418340#7418340 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7418340#7418340
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Visual admin tool not working

    hii guys,
    in my netweaver system visula admin tool not working .when ever im trying to connect with user id and password its showing like this.how can i solve this issue.plz help me

    Hi,
    Try to login to system info page with administrator or j2ee_admin for java and dual stack respectively to check if the password is correct.
    If the password is incorrect, then check if you have any alternate admin ID. Change the administrator or j2ee_admin password, then try to login with the new password. Change the password of SDM and securestore to the new one.
    If this is not the case, then check the log files in visual admin directory. Please post the same.
    Cheers...,
    Raghu

  • Adobe photoshop tools not working on a Surface tablet randomly?

    I just installed CC Adobe photoshop on my Surface Pro 3 tablet and it has been nothing but frustration.   For reasons I cannot discern, the tools do not work on my image at random times.  I'll have smudges on one of the layers, and I choose the eraser tool and it won't erase anything in any layer.  I can't draw anything with a brush or pencil either.  In fact the tools stop working altogether. Yes the layer is active and visible, no it's not locked.  Very frustrating, and I'm at wits end. The only thing I've been able to do is save my work in stages, and go back to the previous stage if this happens. Is there a glitch on the Surface pro 3 with photoshop that causes it to not respond?

    I was having the same trouble, so i went to Adobe Help's Preferences > General Settings and switched to Display Local Help content only = Yes. As it says there, it disables the online links, but if you have an updated version of Help downloaded, it's easier and quicker anyway than the online system, and likely all you were needing anyway. You can always turn it back on later.
    Brad

  • Anyone else have a problem with tools not working?

    With no particular cause, int he middle of working on things, tools like lasso tool, eraser, the brush or the clone stamp stop working.
    The program will hang for a while and then I am able to switch tools, while using one particular tool at that time won't work. Until I restart photoshop.
    Changing Open to GL of/on won't work, and it is not because of the autosave in the background.
    Anyone with this same problem?

    I am not sure if it's the same thing. I do get hangs when in the middle of editing. I haven't been able to pin it on any tool, selection, or function.
    At first I thought it was because the splash screen for the beta hadn't come in and that made File>Open Recent unresponsive. It's as if the program doesn't really wake up until you get rid of the splash screen.
    But that isn't it entirely because it happens during editing as well, long after the splash screen's gone. Suddenly, nothing responds--not tools, not menu items, not layers. It has happened with Topaz Plug Ins at least once, but the rest of the time it's been while working within Photoshop itself.
    But photoshop didn't stop responding (according to the task manager), the cursor (whether mouse or stylus) still responds, no error messages, no crash. A little time goes by, then it responds again without exiting Photoshop, restarting, or anything else.
    What I have noticed happens everytime I have this problem is that, if I just pressed a menu item (such as Layers, or File, or Edit) or a tool icon (such as the brush) it will remain in the selected position with either the darkened box around the menu item or the little outline around the tool). Now that I think of it, I think that the only common trigger is clicking on something. This can go on for as long as a couple of minutes, but it always resolves itself.
    The only tool that might have choked during actual use is the lasso tool on polygonal mode. I just couldn't seem to make the next click.
    I'm thinking now that it has something to do with saving in the background and--if that's the case--I'll live with it gladly. But it puzzles me because I think my system should be able to handle the extra memory involved in background saving.
    These are my system specs:
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2660 MHz
    Built-in memory: 12279 MB
    Free memory: 7367 MB
    Memory available to Photoshop: 10994 MB
    Memory used by Photoshop: 72 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTS 240/PCIe/SSE2
    Display: 2
    Display Bounds:=  top: 0, left: 1920, bottom: 900, right: 3520
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1200, right: 1920
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTS 240
    OpenCL Unavailable
    Driver Version: 8.17.12.9573
    Driver Date: 20120209000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1920 x 1200 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTS 240
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 8192
    Serial number: Tryout Version
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\Carmen\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Q:\, 50.0G, 48.9G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: C:\Users\Carmen\Documents\Adobe--Photoshop--PLUG INS--EXTRA FOLDER\
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   5,0,10,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt42.dll   International Components for Unicode   4, 2, 0, 0  
       icuin42.dll   International Components for Unicode   4, 2, 0, 0  
       icuuc42.dll   International Components for Unicode   4, 2, 0, 0  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       onOneActivationToolbox.dll   onOneActivationToolbox   1.1  
       onOneToolbox2.dll   onOne Toolbox2 Dynamic Link Library   2.2.0  
       onOneToolboxPlus.dll   onOne Toolbox2 Dynamic Link Library   2.2.0  
       onOneWelcomeDialog.dll   Essentials   1.0.0.1  
       OnOneWidgets.dll    OnOneWidgets dll   2.5  
       ONProxySupport.dll   TODO: <Product name>   1.0.0.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
       zlib.dll   zlib   1.2.5  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 7.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins:
       Mask Pro 4.1 4.1.9c
       Mask Pro 4.1 Make Work Path 4.1.9c
       Mask Pro 4.1 Select 4.1.9c
       Perfect Portrait 1.0.1
       Perfect Portrait 1.0.1
       Perfect Portrait Filter 1.0.1
       Perfect Portrait Filter 1.0.1
       Perfect Portrait Smart Filter 1.0.1
       Perfect Portrait Smart Filter 1.0.1
       Perfect Resize 7.0 Professional Edition 7.0.7
       Perfect Resize 7.0 Professional Edition Batch 7.0.7
       Perfect Resize 7.0 Professional Edition Filter 7.0.7
       Perfect Resize 7.0 Professional Edition Format 7.0.7
       PhotoFrame 4.5 Free 4.5.3
       PhotoFrame 4.5 Free Batch 4.5.3
       PhotoFrame 4.5 Free Hidden 4.5.3
       PhotoTools 2.5 Free 2.5.5
       PhotoTools 2.5 Free Batch 2.5.5
       PhotoTools 2.5 Hidden NO VERSION
       PhotoTools 2.5 Hidden NO VERSION
       Reduce Noise 6.2.0.0
       Topaz Adjust 5 10.0
       Topaz BW Effects 10.0
       Topaz Clean 3 10.0
       Topaz DeJpeg 4 10.0
       Topaz DeNoise 5 10.0
       Topaz Detail 2 10.0
       Topaz InFocus 10.0
       Topaz Lens Effects 10.0
       Topaz ReMask 3 10.0
       Topaz Simplify 3 10.0
       TopazRemaskAutomate NO VERSION
    Plug-ins that failed to load: NONE
    Flash:
       onOne
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • Eraser Tool and Pattern Stamp Tools Not Working Properly

    I recently downloaded Photoshop CC on my Mac.  I've been using Photoshop for years and don't recall experiencing these problems.
    When using the eraser tool in brush mode, I select the appropriate preset and opacity, flow etc.
    Let's say I have the brush size set at 70px and hardness at 100%.  I erase, but the area erased is only 2/3rds of the actual size of the brush.
    The same is true for the pattern stamp.  Only 2/3rds of the pattern stamp is working.
    I've tried resetting to the tools and have search all over for similar problems in the forums but cannot find a solution.
    Any help would be greatly appreciated.
    Thanks in advance.

    Not being a Mac user I don't recall the specifics, but there is I believe a system setting for cursor size.  You may have it set larger than it should be to work with Photoshop.
    -Noel

  • Replacement install DVDs not working (possible serial number problem?)

    I have been sent two sets of Mac OS X install DVDs as my old disk 1 was too scratched by my (now replaced) faulty optical drive.
    I asked for a disk 1 and disk 2 replacement and they sent them.
    First of all i dont know which is disk 1 or 2 as they arent written on the disk, only "Macbook pro Mac OS X install dvd" and "Mac OS X install dvd"
    The first set disk 1 serial number was - 2Z691-5841-A
    The second set disk 1 serial num was - 2Z691-5948-A
    My ORIGINAL disk 1 serial number is - 2Z691-5967-A
    My question is do the serials matter if it is still OS X?
    I attempted to install with both these and the Macbook PRo stayed on Grey screen then just spat them both out, where as with my original it goes through the install process (but can not finish due to the scratches)
    I called Apple again today when i got them and he said it was the laptop, however i know it isnt as my original disk boots to the install screen where as theirs dont, he said he would send the version of disk with my original serial and see if this works.
    So.....does the serial matter? I think he said there are three "versions" of disk 1, and my understanding was you can not use any of these unless it is with that specific version also of macbook pro.
    Thanks

    I purchased it directly from Apple on the Apple website.
    I told the guy at applecare the number on my original install disk 1 and he said he would send that one.
    Then i called again later to ask if they needed the serial of my actual macbook pro, he took it and said it looks like they have already ordered the correct CD.
    I HOPE it will be here Friday, waiting yet another week.
    If it does not work i cant think of anything, my originml works and the laptop has NOTHING installed on it, free hard drive....soooo all i can think of is taking it to an apple store with ALL the disks they have sent me and see if they know whats going on.

Maybe you are looking for

  • Java with MYSQL in Linux

    i am using JSP in Linux Platform. when i connected to mysql with mysql driver for odbc by using the following code, import java.sql.*; public class TestMysql public static void main(String args[]) { try {           Connection con;           String co

  • PO Revisions after Output

    Hi all, Is it possible to identify the changes made to PO after release has been carried out?. Basically after the document has been released, and the message output, any changes from there on, must identify each new print with a Revision No. For eg.

  • Reporting on a Multi-Select list field X:Y:Z

    I'm sure someone must have come across this problem but I can't find a reference to it on the forum. PROBLEM I have a data entry form with multi-select lists. Users choose a number of display values and the return values are stored in the field in th

  • Portal Dynamic Menu's

    Hi I'd like to create a dynamic menu using Dynamic Pages in Portal Provider for our Portal homepage. In the database I have found menu tables - one that contains main-menu items and another that contains sub-menu items. These tables are modified by a

  • Facebook Like Button in iweb??

    I'm trying to create a Facebook like button for my website. I have followed the instructions on the facebook developer page, pasted the code into my HTML Snippet and it's not working. Any thoughts?