Erased hard drive - lost iWeb design

I designed a web site using iWeb and published it through my own web host (not .mac). I upload it using Fetch. Last week, I had to reinstall my system software and lost all my stuff, including my iWeb files. I've reinstalled Fetch and iWeb and I've downloaded the site back onto my computer. Is there a way for me to now import the site back into iWeb so that I can update it?

iWeb can't open HTML files.
You need the Domain.sites file created by iWeb but you wrote over that file with your re-install.
If you have any back ups of that file you can bring it back into your Home folder and iWeb will recognize it.

Similar Messages

Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?

Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
in response to Niel
Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

How do I install OS software on a erased hard drive all I get is folder icon with blinking ?

Trying to install OS10.6 on erased hard drive but just getting folder with blinking ? symbol any ideas?

Startup with the Snow Leopard installation disk ALREADY IN THE DRIVE.
If it pops out, push it back in during startup. It will take a long time, but be patient.

I have an 8 year old eMac G3. It will not start up. I need to erase it before putting it in recycling. Apple refuses to open the case and warns me that I will be shocked if I even try. They say no way to erase hard drive. They say use a hammer. Any ideas?

I have an 8 year old eMac G3. It will not start up. I need to erase it before putting it in recycling. Apple refuses to open the case and warns me that I will be shocked if I even try. They say no way to erase hard drive. They say use a hammer. Any ideas?

Hi, no eMacs had G3s, only G4s. Is it maybe an iMac G3?
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
http://www.ifixit.com/Device/eMac

Trying to back up to external hard drive (iomega). Instructions say to erase hard drive. Won't entirely erase. Can't enter iomega in Time Machine. Computer is minimac, operating system is OSx 10.6.8.

Trying to back up to external hard drive (iomega). Instructions say to erase hard drive. Won't entirely erase. Can't enter iomega in Time Machine. Computer is minimac, operating system is OSx 10.6.8.

All you need to upgrade the iBook for Tiger is another 128 MBs of RAM. It has both Firewire and USB ports. You do want to upgrade it for what you plan to do. The problem you may continue to have, however, may be due to the fact that the age of the computer is such the disk controller does not support hard drive volumes larger than 128 GBs, which is probably the reason the drive won't mount.
The reason you get DU errors is likely because the drive was formatted using the Intel Tiger version of DU, while you were using the Jaguar version. That's a definite no-no.

Securely erase hard drive on Mac Air for sale on e-bay.

I would like to sell my Air (1.6 gz -80GB) on e-bay and want to securely erase hard drive (I use a lot of financial info.). I am running Snow Leopard but I no installations left. I have the original CDs but not the external super drive. Any ideas on how to erase all data? Thanks a million.

http://support.apple.com/kb/HT3263
Dave M.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

TS1600 I received a 2008 Imac with erased hard drive. I have the two discs to install OS X but when it tries to boot just comes up Mac OS X cannot be installed on this computer. Is there anything I can do to get this running

I rceived a 2008 Imac with erased hard drive. They gave me the two install discs but it keeps coming up cannot install OS X on this computer.
Is there anything to do. Thanks hopefully

Well, Apple would probably point out that what you are trying to do violates the EULA.
Technically speaking, however, the issue is that the install/restore DVDs that ship with Macs do not carry all the drivers, or even all of the various versions of libraries that support all of the various models of Macs. The come-with-your-Mac disks are different than the retail versions of the OS (also, the come-with-your-Mac ones bundle iLife, which the retail ones don't).
Because the come-with-your-Mac disk contains only the drivers specific to that generation and model line of Mac, it contains a stub of code that verifies that your hardware matches the driver set on the install/restore DVD.
Your friend has a different model of Mac, with different hardware, so her install/restore disk won't work in yours. Solution: go get the retail boxed version of Leopard.

Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac pro but will not boot. Can original install disks be replaced. Thanks

Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac Pro but will not boot. Can original install disks be replaced. Thanks

Yes the original Install Discs can be replaced for a nominal fee. Call AppleCare, you will need a credit card and the serial number of the machine. You can use the AppleCare Contact Info for the phone number on your part of the planet.

What is the best way to recycle 2010 MacBook? Also, it is completely dead and cannot erase hard drive.

What is the best way to recycle old 2010 MacBook? Also, it is completely dead and I cannot erase hard drive.

Depending on where you are located, country, region, etc, you may have options should
you wish to have it professionally restored or repaired to function properly again...
Even an Apple Store with Genius bar could, in several locations, give the product a look
and perhaps be able to diagnose the underlying issues. However that varies with the
degree of failed components and what is really wrong with it. A battery and a new HDD
could be all that's wrong with it. A diagnostic is often free, even on out-of-warranty Mac
at the Apple Store genius bar; an appointment is advised.
However if you only wanted someone to extract the hard disk drive and attach it to
a 'universal USB drive adapter kit' so at to try and access any readable files on it,
that is something that could be done at an Apple Authorized service provider; as
some of them may even have a section of resale products such as this adapter kit.
An example of this kind of kit includes wires, adapter parts, & a separate power supply
so it can be used to run the hard drive's electronics. This is not intended for permanent
use, but works like a set of patch cables to access the bare drive without an enclosure.
https://www.ifixit.com/Store/Mac/Universal-Drive-Adapter/IF107-108-1
Another kit example says it'd work with almost any HDD or SSD of several build types:
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
Companies that specialize in restoring Apple portable computers can give you an estimate
on a repair and the good ones can do that without a fee; they will not start a repair after they
see the computer until you get the estimate, and approve of the repair. If other items are
found to be of interest requiring other work or parts, they will also contact you, again before
continuing. One of these kinds of companies I know about (half a hemisphere away) is in
the eastern US, and worth inquiring of even if you are overseas. wegenermedia.com.
While I have no connection with any of these products or service suggestions, they do have
some variety of good reputation (ifixit.com has DIY repair guides; macsales has parts, etc.)
in standing, among many Mac users across a section of the planet...
Any concerns about the data on the hard disk drive should be able to be answered by a
local Apple independent; they also should have the universal USB drive adapter locally.
Not sure if I answered your inquiry, but there are different ways of approaching this matter.
Good luck & happy computing!
edited

Erase hard drive on eMac OS 10

I am trying to erase the hard drive of eMac OS 10.3.9. Tried Command + R keys while rebooting but disk utility wont let me erase. The erase button is not active/greyed out. Is there another way to erase hard drive completely? I dont need to reinstall because I am trying to discard eMac (15 years+ old). I do not have any of the installer CDs since I threw them out.

You could perhaps try a web search for an old PowerPC release (dban-2.0.0_powerpc.iso) of a free disk wiping utility called DBAN. A CD burned from the iso file should allow a PowerPC Mac to start up (hold down the C key) from a small (Linux) system. It would then be possible to test if and how the utility works on your eMac.
Jan

Both of my computers crashed nearly simultanesously due to mal-ware, had to erase hard drives to start over, did not have chance to de-activate either Acrobat or Creative Cloud before they crashed. I need you to retroactively deactivate these two previou

Both of my computers crashed nearly simultanesously due to mal-ware, had to erase hard drives to start over, did not have chance to de-activate either Acrobat or Creative Cloud before they crashed. I need you to retroactively deactivate these two previous computers (one Dell desktop, another a Dell laptop from my university, the University Of Missouri_KC), so that I can re-install on my laptop (which has been repaired by UMKC), and the other on my new private desktop (which replaces my previous desktop, which cannot be salvaged). I have the serial numbers of my two products, if Adobe could request them
Please respond as soon as possible. - Marc Garcelon, [email protected], UMKC email address: [email protected]@

Hi Marc,
Please refer to the help document below for deactivation:
Activation & Deactivation Help
Also, the creative cloud membership can only work on 2 machines. You will receive an error automatically on the third machine.
Regards,
Sheena

How to install show panther disk on erased hard drive

How to install show panther disk on erased hard drive?

rlfjof
Feb 2, 2014 1:23 PM
How to install show panther disk on erased hard drive?
MacBook Pro, Mac OS X (10.5.8)
Snow Leopard 10.6
https://www.apple.com/support/snowleopard/installation/

How to Install 10.7 Lion on New Erased hard drive?

I want to install 10.7 on a new, freshly-Erased hard drive.
My hardware supports 10.7.
Can anyone point me to simple instructions how to do this task?
Thank you.

2 ways to buy Lion. $29.99 as a d/l from the App Store (you need Snow Leopard installed). If you own another Mac with Snow Leopard, you can create an installer DVD/USB) or you can buy the Lion Install USB from Apple for $69.
When you boot from the installer, Select Disk Utility, then erase the disk. Then quit Disk Utility and install OSX Lion.
(See also: Installing Lion: Macworld's complete guide)

After erasing hard drive and re-installing Lion, is there anyway i can tell if all my files are gone?

Hey guys.
Basically i have sold my iMac after buying a new Macbook Pro. I erased hard drive in disc utility then reinstalled Lion from disc.
When i turn on the iMac now it does the usual welcome video, then proceeds to try and set up the machine. Which i dont want to do as i have sold it and he will want to do that himself.
Dont personally know the guy ive sold it too so basically i want to know how i can check to see if my files have actually been deleted?
Just so all my personal information isnt accessed by someone else.
Thanks a lot

If you erased the disk, the data is gone. If you want to be sure, you can open Disk Utiility again and erase the disk using a special method (select the hard disk > Erase > Security Options) before installing Mac OS X

Erased hard drive - lost iWeb design

Similar Messages

Maybe you are looking for