Erased Ipod touch to repurpose it now I can't re-activate.

Erased Ipod touch to repurpose it.  During activation it shows my apple id but says it cannot unlock it so I cannot continue with the activation.  I am the original owner and only have one apple id.  How do I get around this?

Appreciate the quick reply.  I do have the apple id.  It is stating that it is linked to my apple id on the activation screen and is asking to sign in as the apple id used to setup this Ipod (both are the same id).  When I try to sign in is says that my id cannot be used to unlock this Ipod.  I have even unregistered it from my managed devices.

Similar Messages

  • I enabled radio on my iPod Touch 2G...now I can't turn it off

    I was breadboarding a microphone for my iPod Touch 2G using the headphone/mic jack as an input. I made a simple circuit to power the mics with an additional 2.4V (I suspected the PIP wasn't enough for the 4 mics I was using) but I left out the DC blocking caps on the audio out, and I plugged it into my ipod. I am a bad "engineer"; actually I'm not an engineer at all, I am a guesser and checker. well, now my recordings (with voice memos, blue fire, and epiphany) are all full of static. I thought I had burned something up, but I didn't know what; the mics are still solid (they work in my wife's identical ipod Touch). Then I tried recording again and again with just the PIP, no powering circuit, and when I listened to the static filled recordings I realized I can hear voices in the recordings. changing rooms in my house reveals these voices to be a country music station, and there is no country music on my ipod or being played within earshot of the mic. I can't change the station either.
    If it wasn't the added bias voltage (present for about 10 seconds), it could have been a long-term short in one of the mics. I didn't realize one of the mics was shorting out until the music player kept coming on in the middle of my recordings, so it may not have been the added voltage that did this- it could have been a short to ground of the mic audio contact.
    I understand that the bluetooth chip in these iPods has a radio tuner, and I believe I just accidentally activated it, one way or the other. But I want to record sounds through the mic, not radio, so does anyone have any ideas on how to re-disable the radio?
    Message was edited by: vtjonny

    Dave and Razor,
    I tried the hard reset but I haven't had time to try a full restore, thanks for the suggestion. I'll do it this weekend. I am tempted to just open this ipod up and physically disable the bluetooth chip, but I may just go ahead and make a line-in adapter and microphone preamp for the dock connector rather than go through the minijack.
    But if anyone can figure out how to tune this radio, its in there and definitely can be enabled...

  • So I've updated both my itunes and my ipod touch 4th generation and now I can't sync anything to my ipod so is there anyone out there that can help me?

    I cant sync anything to my ipod touch 4th generation Can anyone help?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    Then, if necessary, see:
    iOS: Device not recognized in iTunes for Windows

  • Found my iPod touch after 3 months, now I can't unlock it.

    I can't for the life of me remember the password, and now it says "iPod Disabled; Connect to iTunes". Now the big problem is that the computer I was syncing it to before crashed on me and I had to get a new one. iTunes won't show the iPod until I unlock it with a password. Is there anything I can do? Or did I just lose $400 down the drain?

    The same thing happened to me, except my computer didnt crash so all i had to do was back up and restore my ipod. Try restarting your computer so see if itunes shows it then or maybe even reinstall itunes. Hope i was some sort of help, good luck.

  • HT201274 So I have tried to update my iPod touch about 5 times now and it still says there is an error. I,ve erased all my settings and attempted to restore it, but it wont let me. I'm ready to throw it away and find a new product.

    So I have tried to update my iPod touch about 5 times now and it still says there is an error. I,ve erased all my settings and attempted to restore it, but it wont let me. I'm ready to throw it away and find a new product

    Errors when updating leads to corrupt system files and this may be your problem. If you're using windows, connect your device to PC and run any third party app like Syncios. If it detects, you maybe in luck and try to back-up your data if possible. I hope that it won't and if doesn't, there is no other way to recover files. You should be restoring with iTunes and all data will be erased, or else your device may become unusable.

  • HT4962 i just got my ipod touch back from a now ex-friend and everything was erased. i mean everything... not even an operating system (or whatever its called) how can i make it useable again?

    i just got my ipod touch back from a now ex-friend and everything was erased. i mean everything... not even an operating system (or whatever its called) how can i make it useable again?

    Connect the iPod to your computer and restore via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • I'm using ipod touch for a year now. I was using this morning and suddenly the ipod doesn't work at all maybe it got wet from my bag but there wasn't wet stuff in there. and itunes said iTunes has detected an iPod in recovery mode. please help me

    I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't work. I plugged to the computer and it said iTunes has detected an iPod in recovery mode. You must restore this iPod before in can be used with iTunes.
    Maybe my bag was little wet today but i don't think that is why.. since it wasn't that bed.. just some paper was wet and stuff..
    What should I do..? Please help me.

    Connect to the Computer you Usually Sync with and Follow the Steps Here...
    Recovery Mode
    http://support.apple.com/kb/HT1808

  • In my haste i sent a message to "erase ipod touch" on find my iphone when iI lost my lost ipod touch. Can I reverse that? Anthony

    In my haste i sent a message to "erase ipod touch" on find my iphone when iI lost my lost ipod touch. Can I reverse that?
    Thanks in advance,
    dizzysaxy

    Sort of if you can get hold of the iPod before it is erased, turn wifi off, then backup the iPod, turn wifi on and let it erase. Then restore from backup.

  • I tried to restore my iPod Touch 2nd generation and now it won't sync to itunes.  on the screen it shows the usb end of the cord and the iTunes logo over it.  Is it broken?

    I tried to restore my ipod touch 2nd generation  and now it won't sync to itunes.    On the screen is the USB end of the cord and the iTunes logo over it.
    I have turned it off and on,  held the off button down and  the select button down but it still comes up with that picture on the screen.    Have I broken it?
    Please help.
    Mimi

    It means the device is in recovery mode.  You'll need to reconnect it to iTunes and restore it again.
    You may need to connect it in recovery mode manually using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • I bought Ipod touch from US. right now I am in Thailand but I could not change my official account

    I bought Ipod touch from US. right now I am in Thailand but I could not change my official account as in my country. It keeps be as Canada why?

    Have you edited your account to change the address to a Thailand one and the payment method to a Thialand one?
    See:
    How to Change Your App Store Account Location | eHow.com

  • Reset ipod touch (2nd gen) and now safari is missing. What now?

    Reset ipod touch (2nd gen) and now Safari is missing. What now?

    Don't despair Look at "Vintapps" in the Apple app store.  It has tons of available apps for all those earlier ios devices.  And you can download them right to your ios device.  Many are free.
    Although I wrote this 99 cent app specifically to help solve this problem, I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
    Be sure to keep backups of older software.  Once an app is updated, the older version is no longer available to be downloaded from Apple.

  • I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

    I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

    This has worked for some others.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201406 while trying to update my ipod touch  something happened and now my screen only shows the apple logo and nothing else happens

    while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have an IPod Touch that is disabled. I can't connect it to ITunes becaus e the computer I synced it with cannot be used. How do I sync it to the computer I have right now?

         I have an IPod Touch that is disabled. I can't connect it to ITunes because the computer I synced it with cannot be used. How do I sync it to the computer I have right now without using the old one?

    polaricee1319 wrote:
         I have an IPod Touch that is disabled. ...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have it resolved... have a look at this link...
    http://support.apple.com/kb/ht1766

  • I have a Macpro Book and I just downloaded new software to my ipod touch(3rd gen).  Now itunes does not recognize it nor will it turn on.  I believe it just downloaded but did not update the software.   What do I do?

    I have a Macpro Book and I just downloaded new software to my ipod touch(3rd gen).  Now it does not show up in itunes nor does it turn on.  I believe it just downloaded the software and never updated it.  What do I do?

    You appear to have a second generation iPod touch, not a third, and those can't be updated past 4.2.1. Apple sold 8GB second generation models at the same time as the third generation ones.
    (70782)

Maybe you are looking for

  • Problem linking A/R invoice table INV1 and Credit memo table RIN1

    Hi Experts, I have developed a sales report by picking data from the A/R invoice table INV1, BP partner table OCRD and Charts of accounts table OACT and the report is working fine. The only problem is I am having a challenge linking the above tables

  • I can't sign into iMessage or FaceTime

    On iMessage I went to Messages, Preferences, Accounts, and it asked me for my Apple ID and password. I tried to sign in and it says "Could not sign in to iMessage: The server encountered an error processing registration. Please try again later." EVER

  • Numeric to hex conversion

    Hi i am new to labview. i have implemented a controller circuit and serially communicating with using lab view in that i am using a numeric value and converting it to hex using numeric to hex string and receiving that on port 1 of controller but that

  • OS X Lion help

    I have no way of backing up my computer (only have a 3.98GB flash drive) and it needs to have Lion reinstalled to clean the disk up a bit. Any ideas on what to do??

  • Covert analog input signal (NI 9203) to meaningful units

    I'm very new to LabVIEW and I wanted to do something that I thought was fairly simple. Using the NI 9203 analog input module I wanted to measure pressure using a sensor that has an output of 4-20 mA. Altough I get some signal at the end on my screen,