Erased Old Hard Drive

I accidentally erased my hard drive when I installed Leopard onto my machine. Is there any way to recover the desktop files I had?

Unlikely. your only hope is data recovery software like [Data rescue II|http://www.prosofteng.com/products/data_rescue.php] or [Filesalvage|http://www.subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1]. this is far from guaranteed to work as those files may have been overwritten by new data. you should use that software ASAP to maximize recovery chance. Also, You should start backing up to protect yourself from similar data loss.
Message was edited by: V.K.

Similar Messages

How to Erase Old Hard Drive?

I use a G4 QuickSilver 2002; run 10.5.8 Leopard. How do I completely erase a hard drive and make it ready to install as a Master HD in another G4 QuickSilver 2002?

Thank you very much for your assistance, Klaus1!!:)

Error trying to erase old hard drive.

Hi,
I have just replaced my hard drive to a new 160GB one as 60 is not enough. When i changed the drive i just did a simple disc image for the new drive.
I have put the old drive in an enclosure and is now an external hard drive but it still has OS X, applications etc.
When i try to format it this comes up;
http://www.flickr.com/photos/91173844@N00/1429158764/
Thanks,
Andrew.

In addition to what scb says, you could quit Disk Utility, unmount the disk from the Finder, and then restart disk utility and try to erase it.
bd

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

Old Hard Drive Fried! How To Add Photos and Music from iPod to iTunes

Hello! I'm in serious need of some help.
My old hard drive died without any warning, so I lost everything that was on it. Luckily, my iPod is full of very important photos and all of my music.
How do I transfer these images and mp3s into iTunes on my new computer?
I've lost everything else, so the last thing I want to do is lose the only photos I have left along with the gigs and gigs of music I spent months gathering and organizing.
Please let me know the surest way to transfer these images and music files from my iPod into iTunes.
Thank you so much for your help! This event has saddened and exhausted me completely.
All the best,
Sunshine
Toshiba Satellite Windows XP

If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers has been introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
CopyPod Windows Only
If your iPod is set to update automatically take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for a reasonable outlay.
For some additional ways to retrieve photos from an iPod try:
iPodPhotoCopy Windows only
CopyPodPhoto Windows only
iPod Photo Liberator Mac & Windows
Use Disk Mode to copy photos from iPod

I erased my hard drive and now my Macbook pro won't boot

I bought a new macbook pro the other day, so I decided to erase the hard drive on my 2010 Macbook pro and reinstall my OS cleanly. I erased the hard drive and tried an internet recovery. It downloaded the recovery and would not boot. Tried resetting everything you could name of and it doesn't help. Can't get anywhere with command R, it just freezes. Safe mode won't boot. Command V, eventually ends with an error saying to return to old smc. I pulled the hard drive out and put it in another mac from about the same year and through internet recovery, actually loaded OS Lion back on it. I put it back in the problem mac, and it just freezes at the apple logo and spinning wheel. Can't understand why erasing the hard drive would effect any hardware, but maybe it messed with logic board somehow? I've now tried using the Recovery partition, since OS Lion was loaded on the drive, but it freezes there as well. Any help would be appreciated. Thanks

Are you sure it came with Lion?
Check out the support page for what build shipped with which OS.
PJRS

I have a new hard drive on my imac I want to sync my ipad(which has the files I lost when my old hard drive died), which holds the files I lost when my old hard drive died. How can I sync my ipad with my new hard drive?

My hard drive on my IMac died, so I have a new hard drive. I want to sync my Ipad(which has the files I lost when my old hard drive died) back with my IMac. How can I sync my Ipad with my new IMac hard drive without erasing my legacy files on the Ipad at the same time?

Copy everything from your backup copy of your cpomputer to your new hard drive.

How do I erase the Hard drive????

My iBook is about 4 or 5 years old with a brand new 80GB hard drive and brand new Charger plug. Now my logic board is broken and I don't want to put any more money in fixing it. So I just want to sell it but want to erase the hard drive first. Anybody can tell me how to do that?

ElkeTheStallion, welcome to Apple Discussions.
Here's how I understand your request.
You have an iBook that is inop due to a logic board failure. This precludes booting the iBook with a CD/DVD to use Disk Utility to erase the HD. You also can't boot the iBook in Target Disk mode to interface with your MacBook to erase the HD.
So your only alternative is to remove the HD from the iBook and install it in an external drive housing - USB or Firewire (best). Then you can interface the HD to your MacBook to retrieve the files & transfer to your MacBook & then erase.
These links give the instructions for removing the HD.
Fix It Guides for Mac Laptops & Mini
http://www.ifixit.com/Guide/
The guides can be viewed on-line or you can download a PDF file.
How to Upgrade, Repair, Disassemble an Apple/Macintosh Laptop or Notebook
http://repair4laptop.org/disassembly_apple.html
PowerBookTech
http://www.powerbooktech.com/
Suggestion - If you are going to sell the iBook for parts, don't reinstall the HD. It won't bring you much more $ in a laptop that won't work. Retain the 80GB HD and use it as a backup for your MacBook.
 Cheers, Tom

I have a new pc-no access to my old hard drive-can`t access new tunes or add cds to libary

just aquired a new pc-no access to my old hard drive-consequently i can`t download new tunes or cds i have bought. my libary does`nt exist-on my old hard drive. help!!

Unfortunately, if the iPod data has been erased by iTunes, there is no way you can retrieved them.
Do send your issue to iTunes. feedback.

How do I erase a hard drive

I got a " new to me" computer and want to fire wire my old computer over. Problem is "new to me" computer still has stuff on it and I need to erase the harddrive so that I can swith my computer over. Any one know how to do this?

What you need is the install disk for your "new to you" machine. Boot from that and you can erase the hard drive and then reinstall the original OS.
There may be another way, but would need to know the exact OS versions:
Which OS version did the "new to you" machine come with (originally, if it was upgraded), and
which version is on your own old computer (the one you want to move data from)?

I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far, just before cloning may start and receive an "error 254" and can go no further. Any idea what this error is?

I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
Vince

Connect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao.

How do I transfer data from old hard drive to new mac exactly the same as it was on my old one?

Unfortunately my 2009 iMac has been written off due to a faulty motherboard. Thankfully the company we got the mac from are providing me with a brand new one at no cost as I am under warranty. My old hard drive had many important documents and applications on it and we have requested for the old hard drive back. What I would like to know is how to I go about transferring all the stuff of my old hard drive to my new iMac? I would like everything to be set out exactly the same as it was on my old mac so basically I would like it cloned identical on my new mac from my old hard drive.
Thanks Nathan

In general, most people will recommend Carbon Copy Cloner or SuperDuper! You can find either one easily enough with a web search.
However, in your case, I imagine you are going to have a hard disk returned to you all by itself, and you will need to install it in an enclosure. Don't let that bother you as this is easy to do and the enclosures are not expensive ($40 or so).
Once that is done, I would recommend you set up your brand new Mac by answering all the questions during initial setup as usual. Be sure to use your correct Apple ID - probably the same one you used to log into this support forum. When you reach the point in which it asks you if you would like to transfer your old documents and settings, connect the old hard disk and select it as the source. It will take some time as it copies all its contents to your new Mac. All your familiar items will be exactly as they were on the failed Mac.
After that, you can use the old hard disk as a Time Machine backup. When you are satisfied everything on your new Mac is running as it should, go ahead and erase the old disk. Then, tell Time Machine to designate it as a backup, and the rest is automatic.

How do I erase the hard drive on my 2007 Macbook with operating system 10.4.11 ?

I am going to recycle my old Macbook and want to erase the hard drive. When I go into utilities-disk utility-click on Macintosh HD-and the Erase tab, the only active button is Erase Free Space. The Security Options and Erase button are not active. How can I erase the entire hard drive? The operating system is 10.4.11.

You have to boot to another drive. You cannot erase the drive to which you are booted. Typically you would use the system installer discs that were provided with the computer originally.
Alternatively you can use another computer which is running OSX and put the old one in Target Disk Mode. The old one will simply be seen as a normal hard drive which you can erase.
How to use FireWire target disk mode - http://support.apple.com/kb/HT1661 - includes description of hardware and software requirements. [What to do if your Mac doesn't enter FireWire Target Disk Mode|http://docs.info.apple.com/article.html?artnum=75414], also read about [Open Firmware Password Protection|http://www.apple.com/support/downloads/openfirmwarepassword.html] which can disable Target Disk Mode.

How can I erase the hard drive securely?

I want to sell my old iMac G3 with OS 9.2. First I'd like to erase the hard drive securely, so that no information can be recovered later. OS X allows you to do this easily with the Erase tab in Disk Utility. Can anyone advise how this can be done in OS 9.2?

Hi, iHope -
To do a reasonably secure wipe of the hard drive, use OS 9's Drive Setup utility while booted to an OS 9 Install CD - it's in the Utilities folder on such a disk. Select the Zero all Data item in the Initialization Options item in the Functions menu of Drive Setup.
This article provides excellent step-by-step instructions - Using Drive Setup

From Old Hard Drive to New Hard Drive

We recently got a new computer. Before we ditched the old one, we removed the old hard drive and added it to the new computer as a third drive. Is there any way that I can get my library from the Itunes folder on the old drive to the new Itunes on my new computer? I really don't want to plug in my Ipod with the risk of erasing all my 2000 songs. I would lose my mind.

So the new drive is just drive "E" or something? Just copy the whole Music folder over (or MyMusic, isn;t it, on Windows?), or just the iTunes folder within that one if you want.

Erased Old Hard Drive

Similar Messages

Maybe you are looking for