Eraser and Clone Stamp issues

Here is are a couple of VERY odd anomalies I have come across.
PS CS4 v. 11.0 on Win XP Pro SP 3 loaded on Dell Optiplex 755...
When using the eraser tool, it will work if the mode is set to "block" but if mode is set to "brush" or "pencil" it will not work.
Also, clone stamp doesn't work at all. I have tried myriad mode settings, brush settings sample settings. After alt/clicking to obtain the sample, I move the tool over the area I wish to "replace" with the cloned selection. Before I click, I can see a small sample of the cloned area where the bush is positioned. However, once I click it goes away and nothing happens! It is recorded as a step in the history panel, but no changes are made to the image.
I must admit that I am stumped. Thanks in advance for anyone's insight.

Susan,
Have you checked for an updated driver from Wacom? Around the release of new versions of PS, they usually have some new ones, that better utilize the features (the REAL ones) in PS.
Also, you should have complete access to your Wacom controls (Control Panel>Wacom) and I'd check to see that nothing has been changed, or reconfigured.
I do not have CS4, but there also might be tablet controls in Preferences?
Last, though you have checked your Brush settings, you might want to look at everything there very closely. I had a similar sounding issue when one aspect of Brush Dynamics was reset. Unfortunately, that was so very long ago, and I do not recall the exact setting that messed things up.
Good luck,
Hunt

Similar Messages

  • How to fix clone stamp issue?

    MAC OS / Photoshop CS5
    As you can see in the attached image, my clone stamp selection doesn't extend out to the edges of the outline, which makes using it very clumsy to use. My PS installation at home and all the installations at this business don't do this.
    I've tried messing with all the clone stamp settings, resetting the clone stamp presets, and resetting the general Photoshop preferences at startup. However, nothing I've tried has had any affect.
    So how can I get this adjusted so that the clone stamp selected area extends out to the edges of the grey outline?

    What version of mac os x are you using?
    If what JJMack suggested above doesn't make a difference, then in general the brush
    size cursor in photoshop on mac os x can be affected by the setting of the cursor size
    set in Universal Access. usually you want the cursor size set to Normal.
    something like this depending on your version of os x:
    http://etc.usf.edu/techease/4all/vision/how-do-i-increase-the-size-of-the-cursor-in-mac-os -x/

  • Spot Removal and Clone Stamp data

    I understand that Ver 1.0 includes "non destructive" spot removal, clone stamp etc. How is this data stored? While I understand how image adjustments are stored as metadata in an XMP sidecar or DNG, if this data is simple text, how can changes to image content also be be stored in these files? As a new version of the RAW image data?

    > "I hadn't realised that metadata could support such functions".
    If you want further thoughts on what metadata could do in future, think of actions in Photoshop.
    Imagine that you ran an action as you were editing a file, then instead of saving the changed image, you saved the original image with the action embedded in the file. Then, when you opened the file in future, Ps automatically ran the action. That would be an example of non-destructive order-dependent metadata.
    Unfortunately, the restrictions on actions, such as not including brush-use, limits the value of such a method. But it is a way of thinking about this topic. (Note that Lr 1.0 holds the brush size in the clone/heal metadata, while Photoshop can't hold brush-use in actions! In that case, Lr is already ahead of Ps).
    A very powerful feature of Ps is the layer mask. Being a greyscale image, it would not fit well into XMP metadata. Perhaps this is an example where Lr will "never" catch up. (Never say never!)
    I've seen several people ask for localised editing in Lr. There are various possibilities for making selections for local editing other than using the full power of layer masks. In fact, a number of the standard ways of creating selections appear to have relatively simple parameters. (Standard marquee tools, select color range, etc. Even refine edges). But a Lr with too many of those in would compete strongly with Ps itself! Perhaps this will be driven by what the natural competitors to Lr do in future.

  • None of healing tools and clone stamp tool working on CC

    So I tried rstarting the computer and the program, and it still wont work, it wont sample the image and when i click it just shows and white dot then nothing. I'm on my macbook pro, using CC, and yes its updated.
    HELP!!

    Could you please post a screenshot with the Layers Panel and Options Bar visible?
    Please read this for general trouble shooting advice:
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • Healing brush and clone stamp tools are not working - Photoshop Elements 11.

    Anyone have suggestions on why the tools stop working?

    Reset the tools. Look for this> and reset all tools
    If that does not fix it, reset preferences to default. Go to Edit menu>Edit>Preferences>General and look for this
    Close PSE and relaunch

  • Clone Stamp Issues

    Performed image editing to digitally remove some elements.  During the process, the "image size".  Although the editing went well the resolution of the image is clearly degraded. 
    1- could the change of image size have anything to do with this outcome
    2. If the edit is repeated from the original image what precautions might be taken.
    * The images are uploaded to: https://skydrive.live.com/?sc=photos&cid=1727c265a60f257a#cid=1727C265A60F257A&id=1727C265 A60F257A%21321&sc=photos
    Guidance sought

    That usually happens if you have the Caps Lock on, if not that, check in photoshop under Edit>Preferences>Cursors and check those settings.
    Did you use Image>Resize to downsample the image and if so what settings?
    Just curious because if i downsample the image using any one of the bicubic options in the image size dialog to a size of 768x227 it's not all blurry.
    MTSTUNER

  • Clone Stamp and Healin Brush not Working

    I am also having problems with this healing brush and clone stamp tool
    I am running Windows 7 (64 bit on a powerful computer with 6 Gb Ram and pleanty of HDD space.)
    I am using a wired mouse and do not have a tablet connected.
    I have duplicated the Background as a backgound copy ab\nd mad the backgound invisible ther backgound copy layer is selected and is made visible.
    Clicking on the either tool, I move the cursor to the source area I wish to clone from and [Alt]-Click. I then try to love the cursor to the destination area, the part I want to cover up with material from the source area.
    What happens is the entire image moves showing as I move the mouse, revealing an other image below that does not move.
    Either I do not understand what these tools are supposed to do, (I doubt that because I have used this tool several times in PSE 6 without problems.) or there is something terribly wrong with the program.
    I underststand, fronm reading the forums that the same problem exists in CS4.
    I have checked for updates but the only update that I have not downloaded and installed is support for Raw files from newer cameras.
    PS The files I am working on are originally JPGs and have not been converted from any other file type.
    Below is a screen shot illustrating the offset image.
    Thanks for any help you may offer.
    BTW Does Adobe support this program? I can only find help this kind of help in the forums.

    Hi,
    This looks like you have the overlay feature turned on for the tool. When you select the clone or healing brush, look up in the options bar and select the icon for more options. Uncheck the box that says "Overlay".  I am not sure if each one is independently set in Elements or if a check mark turning on or off overlay effects both tools as it does with Photoshop.
    I don't have a copy of Elements that includes this feature but on the option bar the icon that you need to click is located below where it says "sign in" in the editor...to the right of where it says "all layers"---square icon.
    Edit: See Post #1 in which Barbara has a screen shot showing where to look in Elements to turn on/off the screen overlay feature.
    http://forums.adobe.com/thread/738288
    Edit: I see while I was increasing my neighbor's herd of cows...MTSTUNER has posted another screenshot of the options panel. I'll leave this up anyway just in case you also have CS4.
    This is a screen shot of The clone source palette settings that control the overlay in Photoshop CS3.  I'll include this screenshot of where to look in Photoshop just in case you also have CS4 since you mentioned looking through the Photoshop forum for the answer.  In Photoshop, this feature can be turned on/off in the clone source palette. The check mark will effect both clone stamp and healing brush...they share the current setting.
    I actually forgot that this feature also effected the healing brush as well as the clone stamp. Want to guess how I keep mine set? LOL.
    To be fair, I guess looking at this image I could see with a low opacity setting how it could be useful if I wanted to increase this herd of cows.

  • Clone Stamp Confusion in PS CC 2014

    Hello,
    Has anyone else attempted multi-layer clone stamping in the new PS CC 2014? For some reason the layer I am cloning to is getting attached to the mouse and moving around wildly while I try to figure out what is going on. I open the same image in the original version of PS CC and no issues arise. Is this some new feature Adobe failed to put into the tutorials?
    I get that writing this program is incredibly complex and difficult but the clone stamp seems to be a fundamental function in the toolbar, unless this is specifically happening on my system and no others I'd think this would be a fairly major thing to have missed while testing out the beta version.
    If there is a fix for this that I have not yet found please share a link. It is really knocking off my zen while working on photo retouching to have the tools go crazy like this. If it is something others are experiencing, please let me know. I dread having to call into the awful tech support for Adobe products and would love to find an answer here rather than deal with that black morass.
    Thanks
    Working on a MacBook Pro OS 10.9.4, according to the Creative Cloud I am up to date with the latest version of PS 2014.1.0 Release (20140730.r.148 x64)

    Ok so it looks like third time is the charm. I uninstalled and re-installed Photoshop CC 2014 three times and on that third time the clone stamp issue resolved. seems a little extreme just to get the clipped option in the program to function correctly. Tech support was absolutely no help, big surprise.
    So for future reference, if tools in PS CC 2014 are not working, just keep reinstalling the program, it will come out right at some point.

  • Clone Stamp & Paintbrush cursor not displaying on image

    Hey there,
    When attempting to edit a photo (on PS CS3), the cursor for the paintbrush and clone stamp tools does not display on the image - it'll come up when the mouse isn't directly over it (ie around the borders, & workspace etc, but not on the image itself).
    All other tools the cursor will display (eg marque and crop etc).
    Is anyone able to offer any help on the subject?
    Thanks very much.

    If you are using a Wacom, keep the pen well away from the tablet when using the mouse and vice versa.
    Try unplugging the Wacom – if the problem disappears, update the drivers.
    Or
    Try resetting the tools from the little drop-down menu in the Options Bar.
    If all else fails, try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • Healing brush/clone stamp cursor is dark.

    I hope I've overlooked something very simple.  In CS3 on my PC, the circular cursor for healing brush and clone stamp (probably others, too) is always a contrasting color to the underlying image so the circle is always very visible.  With the same preferences set, CS4 always has a very dark, perhaps black circular cursor, so that in dark areas, it completely disappears, making it difficult to select the correct area.
    Just me, my PC or CS4?
    Thanks!

    Thanks for the answer.
    I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
    I'll try to get the Photoshop system info as soon as possible.
    Thanks again.
    Zee

  • CS5 64-bit Content Aware Fill kills Healing brush, clone stamp

    Here's the deal:
    1)  Open image for retouching-background layer only
    2)  Make copy of background layer 'cause I never retouch there and CAF won't work on the blank layer I use for all other retouching
    3)  Add blank layer above the previous two layers for clone stamp/healing work--can't use it for content-aware fill
    4)  Find something that will retouch better with CAF than cloning or healing and fix it with CAF on layer 2
    5)  The healing brush and clone stamp now do not work.  I can see them, and the clone stamp continues to preview in the brush correctly, but when clicked nothing happens.
    The only solution I've found is to save the image and restart CS5.
    CS5 64-bit, Win7 Pro 64 bit, Core2duo e8400, 8gigs RAM
    Consistent and reproducibly annoying...
    Steve

    Okay, I duplicated your setup exactly with CS5 64 bit on Win 7 x64.  Background layer, copy of background layer, and transparent touch-up layer.
    You are unclear about exactly how you're invoking the Content Aware Fill.
    I went through exactly the steps you suggested, as evidenced by the following Photoshop Edit log excerpt.  I saw NO difficulties using the Clone tool in the last step.
    Are you aware you can use the SPOT Healing Brush, in Content Aware mode, to do what you're doing on the transparent top layer (thereby avoiding the need to work on the background copy layer)?  It is able to deal with the image being on the lower layers.
    Photoshop Edit Log:
    2010-06-17 10:58:24 File Blake_and_Mom.psd opened
      Open
       C:\MMEDIA\Retouched Photos\Blake_and_Mom.psd
    Duplicate Layer
      Duplicate current layer
       5
    New Layer
      Make layer
      Select clone stamp
      Set Source Sampling Point of current application
       To: Document Location
       Source: layer “Layer 1”
       Location: 1420 pixels, 743 pixels
    Clone Stamp
    Clone Stamp
    Clone Stamp
      Select layer “Background copy”
       Without Make Visible
      Select spot healing brush
    Spot Healing Brush
      Select layer “Layer 1”
       Without Make Visible
      Select clone stamp
      Set Source Sampling Point of current application
       To: Document Location
       Source: layer “Layer 1”
       Location: 1299 pixels, 879 pixels
    Clone Stamp

  • Clone stamp and healing brush issue

    having problems with photoshop 5.5... new issue for me, as there weren't any issues yesterday. both the 'healing brush tool' and the 'clone stamp tool' are giving problems. when i press the alt key to collect an area to sample, on my screen it looks as tho the hand tool engages, and there is a second (copy looking) image moving around my screen over the original. i've already tried the 'tool reset all' function and rebooted... still haveing the same issue. anybody have some advise? help a guy?

    thanks soooooo much... not sure how i managed to select the 'show overlay' box... but i had. free at last!

  • Clone Stamp Tool and smudge tool issue

    iMac 21.5";   new on 12/14/2011;   OS Version 10.7.3;  2.7GHz Intel Core i5;  AMD Radeon HD 6770M 512 MB.
    Two and Three Layer, all layers are copies of background layer, plus two adjustment layers, 8 Bit file:
    Clone Stamping directly on image layer with Background layer directly below and with copy of Background layer directly below.
    Intuos 4 tablet and pen.
    Clone Stamp tool Setup:
    Layer Adjustment parameter set to either This Layer and Below or All Layers.
    All other parameters at default.
    Using simple soft brush.
    =====================================
    The bug: Clone Stamp too will only affect the layer selected to do the actual cloning.
    Tried it in every configuation possible without adjust the tool defaults, and no layers below will get the cloning corrections or stamping.

    Welcome back gang.
    Made a couple new discoveries while double checking.
    Again, the same four layer setup: Background-Background copy-HSB Adj layer-Levels Adj layer.
    The problem replicates with the Adj layers clipped or not.
    The key is any tweak in the Adj layers will cause the issue.
    Any Adj layer tweak seems to get exaggerated when smudging on a layer.
    For example, increasing the gamma or center slider in the Levels box will cause all bright pixels to go white and darker pixels to go black.
    I do not know the threshold luminance pixel value but I would guess it is at 128/128.
    Modest tweaks to the Adj layer, for example raising the gamma slider to 1.20 will cause the smudge to posterize or turn white.
    Tweaking the HSB Saturation slider to +12 will cause color posterization.
    Counter to what I had stated upstream, any setting of the Smudge tool will cause this to happen.
    Also, as said upstream, the performance goes down such that the spinning balls appear frequently.
    In other words, it does not appear to be a 1-to-1 relationship of tweaks made in the Adj layer to the effect of the Smudge tool.
    My guess is that the Sample All Layers option is multiplying the color and luminance values fo the layers together.
    Plus, it was probably designed to do so but I do not think it was to be so pronounced.
    Still amazes me that the situation never occurred or did I notice it until now, and the issue exists in CS5 too.
    When did PS add the Sample All Layers option to the Smudge tool?
    Anybody else?
    ================================
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Mac OS 10.7.3
    System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 4
    Processor speed: 2700 MHz
    Built-in memory: 4096 MB
    Free memory: 1738 MB
    Memory available to Photoshop: 3384 MB
    Memory used by Photoshop: 75 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 ATI-7.18.11
    OpenCL Version: 1.1 (Dec  4 2011 16:53:18)
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Renderer ID: 16915206
    Video Card Memory: 500 MB
    Video Rect Texture Size: 16384
    Serial number: Tryout Version
    Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Macintosh HD, 930.7G, 700.7G free
    Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   5.0.11.0   1.256674
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1642  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1640  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Required plug-ins:
    (removed)
    Optional and third party plug-ins:
       Perfect Effects Free 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
       Perfect Effects Free Filter 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
       Perfect Effects Free Smart Filter 3.0.2, Copyright © 2012 onOne Software.  All rights reserved. - from the file “Perfect Effects Free.plugin”
    Plug-ins that failed to load: NONE
    Flash:
       onOne
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • Clone stamp & eraser have a mind of their own!

    I have recently moved from CS2 up to CS5, and am loving all the changes, however the last few days I have been in all sorts of trouble with the following issue.
    When using the clone stamp, or eraser, or even a brush , the cursor keeps jumping half a screen away at odd times causing either whole sections to erased (when using the shift key) or cloning a part elswhere on the image.
    This is really hard to explain, yet easy to demonstrate, but I first noticed it the other day when i was erasing part of a layer and holding down the shift key ....as I clicked along the curve I was erasing, after about the 3rd click it would fly off to another part of the image, OK not a catastrophe as all you do is back up one move, but it happens frequently. The same for detailed cloning ...I am cloning away and it the shoots off at a tangent...
    I recently invested in a USB wireless mouse, which was great, and did wonder if it was the batteries running low and sending out wrong signals, but I swapped back to hard wired mouse, but the problem persisted - however it was not as frequent.
    Its driving me mad as when I zoom out of an image i have been detailing, there are rogue patches on it where its jumped to and i havent noticed..
    Any ideas?

    OpenGL is a system for displaying graphics, which when done properly leverages more of the power of your GPU than the normal Windows GDI can.  Thus when enabled in Photoshop we gain access to smooth panning/zooming, brush gestures, and can even use it for some of the 3D work in Photoshop Extended.  OpenGL is implemented in video drivers/firmware/hardware.
    But OpenGL is very complex, and video driver updates come out all the time with fixes or enhanced OpenGL functionality.  Some work better than others, and bugs in the drivers can result in some very strange effects.  Sometimes new bugs are introduced.
    Edit - Preferences - Performance, uncheck [ ] Use OpenGL Drawing.  If this helps, your video drivers likely have bugs.  They may be latest, in which case you'll need to wait for an update.  Or get a different video card.
    It is also possible that with OpenGL Drawing enabled, changing the Advanced settings can help.
    -Noel

  • Problem with clone stamp in Photoshop 8 and 9

    Whenever I use the clone stamp it may work alright for a while,but then it starts doing odd things like shooting off lines or dots but not the spot I had cloned.  Then I have to undo the marks it has made and hope it will work right the next time.  It has done this on Photoshop 8 and 9.  Is this a known bug?  Can anyone shed light on this problem?

    George I tried your suggestion and the same thing occured. Funny thing is my original script would work ok in 9 Pro but not 9 Reader. Through trial and error I found that if I commented out 'oDoc.closeDoc();' the script worked perfect in both 9 Pro and Reader- all attachements printed.
    I have tested in 7, 8, and 9 Reader and only tested in 7 and 9 Pro. Eveything works fine.
    Very odd.
    Does anyone know if I will run into issues not closing the documents , or are they closed automatically after printing? I don't want to run into memorty isssus down the road.
    Thanks in advance for all the advice,
    -Bill

Maybe you are looking for