Eraser tool question

Hi, I'm a very amateur beginner of AI. I am working on homeworks from the "Classroom in a book" about eraser and has this little hiccup:
You see that little bar at the end of the star? I didn't draw that. That actually showed up right after i use the eraser tool to erase the bottom part of the star. Is this normal? How can I make it disappear?

namhvu99 wrote:
Salty or caramel? I have both.
Hmmm…decisions…decisions…I'll have to think it over!
Peter that is true of course but what i had in mind was to isolate the star then erase that but when i went to dothis i found out the the start and the elipse could not be a compound shape of compound path.
So if the star and the ellipse are compound path they have to first be released then the star has to be isolated then you can erase the star but you are correct it works if it is filled or not. i was wrong in that assumption.
In isolation mode
Out of isolation mode
Same art

Similar Messages

Is there a way to use eraser tool with soft edges?

Hi,
I am wanting to erase the edges of a rectangular object so that it blends better with the background, and am wondering if there is a way of doing this using the eraser tool with soft edges?
Here is a snapshot to illustrate further what I mean:
You should be able to see that above the curve on the left there is a gradient which extends to the top of the image. This is the rectangle which I have applied a gradient to. At the top of the rectangle the colour is the same as the background. What I am trying to do is to blend the left edge of the rectangle in with the background above the curve (below the curve there is a line so no blending is needed). The way I thought of doing this is using the eraser tool with a soft edge. I can do this in Photoshop, but I'm not sure if this is possible or the best approach in Illustrator.
I would be grateful for any advice on this,
Thanks,
Nick

I don't really understand yoru end goal. However, the answer to yoru Eraser Tool question is no. There is no such thing as a "soft edge" for the eraser tool.
The ways to blend objects in specific areas only would be:
Gradients with transparent stop
Gradient mesh with transparency nodes
Opacity masks
Fake it by blending to the same color as the background.

Eraser tool doesn't erase the eraser circle completely like it used to....going nuts here

Okay....I have been on this problem for a couple of weeks. Either I have gone mad, or they changed something.
Simply, I want to take the Eraser tool, a round circle, and erase! Now, PS wont erase the ENTIRE circle to the edge of the circle (eraser). I must have done something and have pushed ever button I could thing of to correct this. It use to be I could place the eraser on something and KNOW exactly where it would begin erasing. Sigh. Can anyone help this Forum Noob. Thanks

Happy to helps -- and please don't cry. I go to pieces when other people cry.
Oh, one more thing... to quote from the email boilerplate::
If the reply answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7012223#7012223and clicking ‘Correct’ below the answer

[iPhone] Creating an "eraser" tool kind of like in a paint program.

I was wondering if any of you have implemented an eraser tool in code using Quartz 2D? I have tried many a thing and looked high and low. Someone mentioned switching to GL ES. Someone who wrote some working paint code for the Mac OS (i.e. not explicitly the iPhone) didn't implement an eraser but alluded that you could clip the CGContextClearRect() method to clear a non-square shape. I can get by using a square eraser with just CGContextClearRect() without clipping but a round eraser (or even a transparent stamp or stamp through to the background/underlying layer) would be a nicety.
Can CGContextClearRect() be prefaced and clipped with, say, CGContextClipToMask()? I cannot seem to get it to work as the one guy suggested.
I guess I could always mask the background and copy the revealed area from the background but that seems cheap.
Regards.

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
All versions of After Effects can do it. There is an After Effects forum for asking questions pertaining to that product.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Eraser Tool in CS6 won't retain half point size(s)

In AI CS6, the eraser tool will not "stick" with a 1.5point setting- the dialog consistently says 2 or some other round number.
However, the tool DOES change to the desired 1.5 point setting.
Can this be resolved?

After posting the question, I realized that NT is just the family of OS (Windows 8.1). I seemed to have solved my problem... for now. I went to startup programs and disabled a couple of programs from opening on start. They were related to the Spoon.net application. After restarting, things seem to working fine again.
I hope this at least helps someone else.

Photoshop CC 2014 unusable due to the brushes/eraser tools freezing on a 64 bit Windows 7 PC!

Help I can't work
I'm using PS CC 2014 on a 64 bit Windows 7 PC. Photoshop is unusable due to the brushes/eraser tools freezing.
Anyone else have this issue or know how to fix it, or how to revert to Photoshop CC using a Creative Cloud subscription?
If this helps, all other cc 2014 programs are running perfectly - as was the previous version of Photoshop.

When exactly does your brushes/eraser tools freeze?
Do you use any Wacom or other brand tablet? If so, have you checked for an updated driver? Disconnect Wacom and use a mouse instead and check.
Disconnect all the external devices and then retry.
Install all the PS updates. Help > Updates
Try resetting the PS CC preferences and check if it's an issue with corrupt preferences : http://forums.adobe.com/thread/375776
Try to open PS CC 2014 in Plugin Disabled mode and check the same. For that Press Shift+PS CC 2014 icon and hit Yes.
Restart your machine and retry.
Let me know how it goes.
~Arpit

Photoshop CC 2014 Background Eraser Tool Not Working

I downloaded the CC 2014 update last week for all of my Adobe products. I've had no trouble with them except for the background eraser tool in Photoshop.
I open a photo and try and erase the background (all of the same settings as I used before) and it's really laggy. You can't drag the eraser, only erase in single points. I have found that by using the standard eraser first, then the background eraser, it will work for about 40 minutes, before stopping again. I then have to restart my computer to get it to work again.
As you can imagine, this is really frustrating. I can't figure out why it's doing this, and neither can my company's IT department. It's not maxing out the RAM or peaking the CPU, so they're pretty sure it's an issue with PS.
I have tried uninstalling, running the CC Cleaner tool, and then re-installing, but that hasn't fixed it.
Is anyone else having this problem? How did you fix it?
Emily

Adobe finally admits that this issue is a known issue. They tried to blame it on an outdated graphics card driver (see above), but mine was current. After I headed off all of their illogical excuses, one by one, they finally sent me an email stating the issue is definitely on their end and they were able to replicate it on their end - contrary to a previous email in which they attempted to shift blame on my end. I have to say Adobe gave all appearances that they are dismissive and in denial about it - until today. Once again, they escalated the issue (Level 2 - whatever that means). I'm not holding my breath. Thoroughly frustrated with how Adobe refused to take ownership of this until I had them corralled. And yes - I did let them know I was not pleased. Very disappointed with Adobe support. I invested a lot of time in previous support sessions, and the issue is still not resolved.

Eraser tool in Photoshop CS5 (block mode)

Hello, experts:
Several months ago, I noticed that, when using the Photoshop CS5 eraser tool in block mode, it was not working right up to the edges of the tool (the block icon that apperars on screen). In other words, when erasing, I have to guess how near it is safe to move it towards something I need to protect, and this uncertainty can cause errors in my work. Has anyone else had this problem, and is there anything that can be done to cure it?
With thanks in anticipation of a helpful reply,
True To Form

The easiest thing to start with is to reset the Eraser Tool.
Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

My eraser tool acts weirdly. Everytime i use eraser tip on my pen, I cannot change the size of it with either tablet wheel or brackets. It changes the size of a brush tool instead. This was not happening in CS6.. Any ideas?

So this problem is annoying me. Is there any setting that has been added and this got messed up or is it a bug? In CS6 I could turn around my pen and use the eraser tip and change the size of it.
Now in CC 2014 I can't do it. I have to manually click the Eraser tool, and then change the size. I must say this is annoying as hell.

Reset the tool? What do you mean?
EDIT: Never mind, i found out how to reset. I Ctrl+Right clicked and reseted both brush and eraser but it still doesn't fix the issue. I also downloaded PS CS6 version and it works fine there.. So I don't know what it is. Must be a bug in CC 2014..

Found Bug in PS CS6 While Trying to use the Eraser Tool

I was editing an 8 bit JPEG that I imported from Adobe Lightroom 3. While using the standard eraser tool to erase the background it would stop working and then move the screen around until I released the mouse button. This happend about every 10 - 20 seconds. I'm using a Macbook 2,1 with the OSX 10.6.8.
Recreate Steps:
1) Import 8-bit JPEG from Lightroom 3
2) Select eraser tool on main layer (background)
3) While holding the mouse button down start to erase part of the image
4) About 10 - 20 seconds in the eraser will stop working and then when you move the mouse around image moves
5) To stop the movement you have to release the mouse button and the find the correct part of the image again and start erasing again
6) Most of the time I was viewing the image at >150%
Hope this helps and you can find a fix. It's very annoying to have to stop and find the correct area of your photo to erase.
Anyone else having this issue?

I am trying to reproduce this but as of now, mine is working properly.
Can you copy and paste your system information in this thread for me to take a look at? (Photoshop Help>system info)
Pattie

Eraser tool won't reverse when swapping fore and background colors

When using the eraser tool to blend layers I often want to "unerase" a bit so hit "X" to paint with white and it still erases to layer below just as it had before switching the foreground "W" and background "B" colors. Makes no sense to me as I thought I could paint back in by doing so.

"You can reverse transparency by painting white (or a light shade) on a layer mask that has been painted black (or a dark shade)." Thanks, Noel.
That is what I am attempting, but when I paint with the white on the layer mask it continues to erase rather than reverse transparency. I was able to do this in the past without fail, but not today. My gut feeling is I've done something which has triggered this problem, but have retraced my steps carefully and am still not finding the solution. The History brush idea I will attempt later, but prefer to first figure out why my old tried and true method is failing.

Disable tablet pen pressure for eraser tool in PSE 10?

Hi, I recently bought PSE 10.
I have an Intuos 3 Wacom tablet and whenever I switch to the Eraser tool, in the brush preview icon (top left corner) I see this ~ type of a shape with narrow-pointy edges, indicating that the size-pen-pressure feature is on.
This is always true, even when I switch off all the per-pressure options via the Brush tool.
Can anyone hint how to control or at-least disable the pen-pressure feature while in the Eraser tool?
Thank you.

One way would be to use the Basic Brushes which are not set for any pressure functions by default.
Or if you need a special brush you could save the brush without any pressure settings with the brush tool selected
and those settings should carry over for the eraser tool.
Also, you can set the mode to clear with the brush tool and that will act like the eraser tool set on the brush mode.

I have elements on both my iMac and mac book. On my mac book i can't hold down left click on the pad and on the right hand side move tools i.e. clone, erase tools etc

i have elements on both my iMac and mac book. On my mac book i can't hold down left click on the pad and on the right hand side move tools i.e. clone, erase tools etc

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Eraser tool doesn't work for black layer mask

I am trying to set a black layer mask and use the eraser tool to edit it. Unfortunately the eraser tool is not responsive. I'm not knowingly doing anything differently than I've done in the past. I recently did a round of software updates for CS6. Wondering if anyone else is experienceing this and if there's a solution?

Check that foreground color in the toolbox is set to black. (opposite from when using the brush tool)
Press D and then the X key.
And that opacity and flow are 100%.
Most people use the brush tool on layer masks and you might find that works better.

My eraser tool is not working properly :(

Please excuse my bad English but it its not my firts language.
When editing pictures with photoshop, I normally create a curves layer to adjust color and then use the eraser tool over it to erase some parts of it where I don't want the curves effect to be seen (I don't know if that makes any sense). I mean, instead of using selections to edit different parts of the picture separatedly, I use the eraser tool because I have found it works better for me if I erase the effect of the parts of the picture where I don't want it to be.
The thing is, this morning I was editing and it worked fine, and suddenly the eraser stopped working on the curves layer. IF I create a new layer and draw a black line with my brush and try to erase it, it works. But it won't erase parts of the curves layer.
I have looked in the Internet for solutions and none of them have worked. I made sure the layer was not locked, I checked the opacity, I reset the tool and photoshop itself, I then reset the whole computer, and I don't know what else to do. I use photoshop CS4 in a PC.
If someone could help me it would be very, very appreciated (:
Thank you so much!!

Hello, I think you should reset the colors to default using the "D" key.
In fact, you are still editing the mask, but you are applying the colors in reverse than if you were using the brush tool.
Another useful shortcut: X that will switch the foreground and background colors.

Eraser tool question

Similar Messages

Maybe you are looking for