Erasing and installing plug ins from the internet

erasing and installing plug ins from the internet?

What plug-in what browser??
FireFox>Tools>Add-ons>Plug-ins, etc
Safari>Preferences>Extentions
Safari>Help>Installed Plug-ins

Similar Messages

HT2509 I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

Font Management in OS X

No destructive editing using installed plug-ins in the sample editor.

It is a shame that it looks like there still is no destructive editing using installed plug-ins in the sample editor. Seems very obvious to me that this feature should be included in Logic. Very disappointing. I’m assuming that you will be able to do this via Soundtrack Pro, but that’s just another layer added to the work flow.

fermusic wrote:
in any case there are no reason to use Soundtrack pro for make a destructive editing with AU plugins.
While everything you say is absolutely correct, in terms of being able to do this within Logic itself, there are times when using Soundtrack Pro does make more sense for destructive printing of AU FX's.
High pass filtering a vocal track with a lot of plosives comes to mind. It's easier to destructively apply the AU high pass filter on just the plosive syllable, or waveform in STP, than in Logic.
Same goes for some extreme cases of De-essing.
With STP selected as your external audio editor, it's very easy to use from within Logic. The two co-exist quite gracefully.
I'd personally love to see Logic adapt some of STP's destructive capabilities, and I'd actually be surprised if we didn't see that at some point in it's evolution.
But I say none of this to dismiss what you've generously offered here. The information you provided in your first post is important for the Logic novice to be aware of.

I recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank"

i recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank" and when i try to open it, i can't? I NEED HELP !

Here is the download page

How do you copy and paste a photo from the internet without a mouse?

Does anyone know how to copy and paste a photo from the internet without a mouse? I would appreciate a response asap. Thanks.

http://support.apple.com/kb/HT2477
Pointing, clicking, and getting around
When you move your mouse or finger on a trackpad, you control a pointer (also known as a cursor) that moves across your screen. The pointer allows you to select and interact with the various items on your screen, including selecting files, clicking buttons, dragging sliders, and so on. Sometimes the pointer may look like a hand, a crosshair, an I-beam, or another icon, depending on what you're doing and the application you're using.
For example, if you're using Safari to view this webpage and move the pointer across it, notice that it turns into an I-beam when you move it over text or a text field. When you see this, you can usually interact with the text or field below it. When you move the pointer over a button or link, the pointer turns into a hand, letting you know that you can click on the item.
Depending on what you're doing and what application you're using, your pointer (far left) may change appearances
Clicking your mouse button or trackpad button once allows you to select the item that your pointer is on. In other words, if your pointer is on a file's icon, clicking once will select it. If the pointer is on a button or link, clicking once will activate it. If your pointer is on a text field, clicking once highlights the field and allows you to start typing text in it.
If you want to open a file, folder, or application, click your mouse button or trackpad twice. This is known as double-clicking. In general, you'll need to double-click items if you want to open them from a Finder window or the desktop. The exception to this is opening stuff from the Dock—just click once on an icon in the Dock to open it.

I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?

I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

How do I cut and paste a picture from the Internet to PowerPoint on a Mac?

HHow do I cut and paste a picture from the Internet to PowerPoint on a Mac?

Kind of depends on where the picture is. Usually you can just select it and if you can move it you can drop it onto the desktop.
You should always check usage rights when you use a picture off the Internet. If it's for a school project or personal then there should be no problem.
Pictures that require a royalty fee are usually marked.

How do I visually monitor instrumental plug-ins from the SAME computer??

Hello -
My set-up is noted below. Please note that my audio device for my main computer (the Mac Pro) is the _Motu 2408 MK3_.
For larger sequencing projects, I use up to a choice of three slave computers (an aging Dell Precision Workstation, a Receptor and a MacBook Pro). I am happy to say that all works fine with this set up.
I own many instrumental plug-ins for the MacPro (and the slave computers). Most of the instrumental plug-ins in this computer (and the others) are "powered" by Native-Instrument's Kontakt 2 Player or the full version of Kontakt 2.
For the first time, I was experimenting with the MacPro's IAC Driver. So, for example, I was able to get the piano to play using Kontakt 2 OUTSIDE of the Logic program using the IAC Driver. It is very nice to know that I am able to do this. However, I was not able to visually monitor the audio signal from within Logic as I was playing the piano sound from the "external" Kontakt 2 program. So, to clarify my problem, I could hear the piano, but I could not see the audio signal on the audio meter from within Logic.
First, I tried using the Logic's "*External Instrument*" plug-in. That did not work. Second, communicating with the "external" Kontakt 2 program using Logic's midi instrument via the IAC driver, I tried monitoring the audio signal using an Audio Channel from Logic. I Could not figure out how to route the audio signal so that it could be seen by Logic, so that did not work.
I tried seeing if I could somehow configure the 2408 MK3 driver and CueMix Console. Nothing.
So, here is my question (possibly two questions):
1) Is it possible to configure the MOTU 2408 MK3 device so that I can monitor audio signals from within Logic that originate from instrumental plug-ins activated OUTSIDE of Logic?
If yes, then. . .
2) HOW do I configure the MOTU 2408 MK3 device and/or configure Logic so that the audio signals can be monitored? (And so that I can add EQ and audio effects, etc.??)
Thank you in advance. . .
Ted

First, noequplease, THANK YOU very much for taking the time to answer my question. I sincerely appreciate the time and effort that you shared!!!
I need to clarify myself, I guess. These are not "external" synths in the literal sense. Everything is "internal" within the same computer (the MacPro) as the Logic Pro program. These are instrumental plug-ins like the *Kontakt 2 Player* or the *Kontakt 2* (full version). What I've learned how to do is connect to these instrumental software plug-ins external from the Logic Pro program via the IAC Driver. So, it's all "internal" within the computer, just "external" from Logic. (If that makes sense.)
The reason I'm attempting to connect Logic this way is so that I can use more of the 8 GBs of RAM found within my MacPro. So, in other words, I would use the Kontakt 2 Player as an instrumental plug-in within the Logic Pro program and ALSO connect Logic Pro to the "external" *Kontakt 2 Player* (the _stand alone_ plug-in version) via the IAC Driver.
I can communicate with the stand alone version(s) of Kontakt via the IAC driver. Sound is coming out. However, I have yet to figure out a way route the audio signals from the stand alone plug-in to inside Logic.
I suspect that your suggestion of using an external mixer might be the answer (despite using computer-based instrumental plug-ins). I don't think that there's a way of routing the audio signal from a stand alone plug-in to Logic without the use of some kind of mixer. I most probably will need a digital mixer to take advantage of the 2408 MK3's ADAT digital signals to route the signals back into the MacPro. Sadly, I can't afford a digital mixer at this time.
I don't know. . . .
BUT, like I said in my original post, my CURRENT set-up using the "slave" computers works just fine. I'm just trying to figure out a way to make use of all of my MacPro's 8 GBs of RAM. UGH.
Any ideas??

How do I delete/remove interent plug-ins from the security preferences of safari

How do I delete/remove interent plug-ins from safari

Hi Joe ..
You can disable plug-ins.
From your Safari menu bar click Safari > Preferences then select the Security tab.
Deselect: Allow Plug-ins
To remove internet plug-ins is another process altogether.
How to uninstall thrid party add ons here.

Moving and Copying Plug Ins from one channel to another

According to p305 of the Logic manual, "Command dragging plug ins from one insert to another copies them along with all parameter settings" ( in the Audio Configuration window),
However when I do this it MOVES the settings and plug ins leaving the original track bereft...
Any explanations gratefully received
ms

"holding option command copies the plug in settings" p305
This is the obvious work around ... excuse the air space

Migrating Logic and all plug ins from old mac to new mac

Hi,
I understand Migration Assistant will bring over all my old files from my Macbook Pro to my new Mac Pro. My question is, I have Logic Pro 7 and authorization key (USB), my new Mac Pro has Logic Pro 9, can I use all my old music files by just using Migration Assistant? What about registration or authorization? What about my 3rd Party Plug ins? Do I have to re install all of them, or will they come over as well through the Migration? Anyone with any experience actually doing a similiar migration to mine, all advice or tips would rock.

some 3rd party plug ins you will have to reauthorize and it can be quite a pain but it does work. im not sure if your old logic files will work though

After downloading and install 10.8 from the Mac Store, where does the install app go? I would like to burn the 'InstallESD.dmg" package to DVD.

Hi folks -- i downloaded ML 10.8 from the Mac Store yesterday, and before installing saw the install app in my Applications folder. Following a posting on Macworld.com, I would like to make a DVD backup of the installer, but after restarting from the installation process, the Installer app is gone from the Applications folder, and I cannot find it anywhere... In would like to make that DVD backup in case I have Internet issues and need to do an install.
Do I need to download the installar again (and if I do, do I have to pay for it again), or is it hidden somewhere invisibly on my drive?--
Thanks in advance ~

It gets deleted as soon as you install.
You need to quit the installer and extract from the app package before installing or download again.
AC

I upgraded to wimdows 7 and installed Acrobat X from the original disc. it opens but only rema

I upgraded to windows 7 and re-installed Adobe Acrobat X from the original disk. It will open but stays open about 10 seconds, then disappears.

Try running the EULA.exe file in the Acrobat File Directory

Problems downloading and installing mountain lion from the app store

HI i have purchased the upgrade for mountain lion from snow leopard and everytime i download and install the install wizard informs that he file cannot be verified so may be corrupt. Am i doing anything wrong?

App store download problems:
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store. Sign in and then reclick the Mountain Lion buy. It won't charge you again.
App Store Error 100
App Store Error 103
App Store Support

I was in the process of signing up and was cut off from the internet. Now I can't get anyone to respond to me

If this is a sign of their customer service, perhaps I might want to reconsider joining this adobe community. Maybe I should just give the 30 day trial a chance and rescind my paid membership.

This is an open forum with a mix of other users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Erasing and installing plug ins from the internet

Similar Messages

Maybe you are looking for