Erazer X700 new BIOS update flash is failing with 4 - Error: Rom file ROMID is not compatible

I am trying to apply the new Erazer X700 bios update from http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-erazer-x-series-desktops/le...
It fails when I run it in the admin cmd window, with message 4 - Error: ROM file ROMID is not compatible with existing BIOS ROMID. Any idea why I'm getting this failure?
Has anyone successfully applied the lastest X700 downloads?

I am also having this same exact issue. Any help would be greatly appreciated Lenovo.

Similar Messages

Built-In Keyboard Firmware Update 1.0 fails with error 23:3 on MacBook 2,1

I attempted to install "Built-In Keyboard Firmware Update 1.0" on two laptops tonight.
Macbook Pro 3,1:
Hadn't experienced the issue that the firmware would resolve. Installed the update anyway, successfully, and continued to have no problems since.
Macbook 2,1:
Hadn't experienced the issue that the firmware would resolve. Tried to install the update, but it failed with error "23:3". After the failure, the keyboard was non-responsive for about 30-60 seconds, during which time I assume it restored/re"booted" itself. Keyboard function was restored automatically after this time, though there was no indication that it would return, and I had to suffer a minor sweat. Still, I didn't learn I power cycled the system and tried again, but the update never installed successfully.
Lessons learned -
If it ain't broken...
That said, Apple seems to have designed their hardware well enough to be able to recover from a failed firmware update. In this case, you just have to pray a little until the keyboard responds again.
Apple: be so kind, let us know what 23:3 means, and if needed, update the Firmware Updater.
//

Hi,
I was just wondering how you were able to get the macbook to accept the update? I had to take mine to apple store and get entire keyboard and trackpad replaced in my macbook. They then told me to ignore the update cause they did not have any other keyboards to replace if it happened again.

VS 2013 Build tools installation fails with error "Signature or catalog could not be verified"

VS 2013 ultimate - Build tools installation fails with error "Signature or catalog could not be verified" for MSBuild assemblies. Any idea what could be the problem?
Thanks
NM

Hello,
Do you mean you are trying to use this tool:
https://www.microsoft.com/en-us/download/details.aspx?id=40760
Can you navigate to your %temp% folder and filter by date to see the log of the Build tool?
I want to know which assemblies failed to be verified.
By the way, since MSBuild is embed in Visual Studio why you want to install this again? Do you have any error about this Build Tool when you install Visual Studio 2013 Ultimate?
“Signature or catalog could not be verified” is always related to corrupt source
, please double check you have a healthy network and then try the web installer again.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Thinkpad T440s BIOS update via PXE fails with "invalid system disk"

Hi,
I'm trying to boot via PXE to the BIOS 2.24 update ISO image because the T440s comes without a DVD drive. The Thinkpads are running RHEL 6.5 workstation installed. I'm using syslinux 6.02 and the following menu entry:
label lenovo_t440s
    menu label Lenovo Thinkpad T440s BIOS 2.24 Update
    kernel memdisk
    append initrd=lenovo/t440s/gjuj11us.iso iso
The ISO gets loaded via TFTP and seems to boot, but then an error message appears:
Loading boot sector... booting...
Lenovo Group Limited
Invalid system disk
Replace the disk, and then press any key.
The Thinkpads come with the following SSD drive: SAMSUNG MZ7TD256HAFV-000L9.
Anyone had luck with updating BIOS via PXE boot?
We also have Thinkpads T430s. There the BIOS update ISO image loads, displays the menu, but when one presses "update firmware" then it freezes.
Regards,
Bernd

Same behaviour when I try without PXE and load memdisk and ISO file directly via GRUB using this entry in /boot/grub/grub.conf:
title ThinkPad BIOS Update
root (hd0,1)
kernel /memdisk iso
initrd /gjuj11us.iso

SSM BIOS Deployment Ends Sometimes Fails With Error 0x642

Good morning,
I am currently trying to use the SSM software to deploy a BIOS update to my 300 HP Folio 9470m and am running into an intermittent problem. The problem I am seeing is that sometimes the deployment will fail with a 0x642 dependency error. I have not been able to determine a reason for the failure, and the same package deployment will work on a different laptop.
The only consistency I have been able to reproduce is that if the install fails the first time, it will fail every other time on that particular laptop.
I have included log files from a successful and unsuccessful deployment. I have confirmed that it does not appear to be an issue with using the incorrect BIOS password, because I can set the password to the one specified when I created the deployment database and it will still sometimes fail.
Let me know if I can provide any additional information. Any help would be greatly appreciated. I really would like to be able to use this software as it would make my job managing these laptops a whole lot easier.
Thanks,
Raymond Northcott
Log file from successful deployment: https://drive.google.com/file/d/0By0fDHxxVEc6SHhZb0VDRVRMRWc/edit?usp=sharing
Log file from unsuccessful deployment: https://drive.google.com/file/d/0By0fDHxxVEc6NXdEOTV6bnJ3TGc/edit?usp=sharing
This question was solved.
View Solution.

I know it is late but I have only seen this post today.
The team responsible for SSM does not monitor this forum.
According to the logs you have posted, you are using SSM version 2.14 A8.
Your version pre-dates the design and production of the 9470 folio by approximately 3 years.
There have been many changes to SSM since 2.14.
Please update to the latest version.
You can ask questions about SSM and other client management tools in the HP PC Client Management Community forum.
      HP PC Client Management Community forum
The pc client management discussion board is focused on the following topics but is not exclusive to them:
HP Client Catalog
                The HP Client Catalog for Microsoft System Center Configuration Manager products is used in the deployment of HP software updates (SoftPaqs) to HP commercial PCs in a Microsoft System Center environment.
HP Driver Packs
                HP Driver Packs contain the necessary Microsoft Windows drivers required
to support HP hardware platform(s) listed in each of the driver pack’s release notes.
HP Client Integration Kit
The HP Client Integration Kit ( HP CIK ) is a plug-in for Microsoft System Center Configuration Manager.
HP BIOS Configuration Utility
The HP BIOS Configuration Utility ( HP BCU ) provides the ability to manage BIOS settings on HP supported desktop, workstation and notebook computers.
HP System Software Manager
The HP System Software Manager ( HP SSM ) is a utility for updating BIOS and device drivers on your networked PCs.
These tools and more can be found at www.hp.com/go/clientmanagement
Look in the Resources menu for items such as the HP CMS Download Library, HP CMS Whitepapers or HP Driver Packs.
The HP CMS Download Library contains the latest release version of SSM.
      HP CMS Download Library
If you have questions about SSM or any of the other utilities listed, this is the best forum to find answers.
thanks,
Richard
I work for HP but am not a company spokesperson. Participation in the community forums is voluntary.

Thunderbolt Firmware Update 1.2 fails with error 0xb

Can't update on my MacPro (2013) with OSX 10.9.5. Stuck on firmware 22.2. When I try to install the update manually I get an error that the update is already installed, but both of my displays are on the old 2011 firmware (22.2). Diving into the event logs reveals underlying problem, but I don't know how to fix. Sugestions? Both displays suffer the black display bug this is supposed to fix.
2014-12-09 11:29:47.354 TBTUpdateChecker[1317:507] Host board-id = 'Mac-F60DEB81FF30ACF6'
2014-12-09 11:29:48.185 TBTUpdateChecker[1317:507] J59 at 'IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG0@1/IOPP/BR00@0/IOPP /BR12@9/IOPP/UFS2@0/IOPP/DSB0@0/IOPP/NHI2@0/AppleThunderboltHAL/AppleThunderbolt NHIType2/IOThunderboltController/IOThunderboltPort@5/IOThunderboltSwitchType2/IO ThunderboltPort@3/IOThunderboltPort@1/IOThunderboltSwitchType1' with UID = 0x00010001005d7070 (0x0)
2014-12-09 11:29:48.185 TBTUpdateChecker[1317:507] Switch already has a valid UID (0x00010001005d7070)
2014-12-09 11:29:48.186 TBTUpdateChecker[1317:507] UID did not need recovery
2014-12-09 11:29:48.186 TBTUpdateChecker[1317:507] Found TBTD at route 0x3
2014-12-09 11:29:48.186 TBTUpdateChecker[1317:507] Checking firmware version
2014-12-09 11:29:48.186 TBTUpdateChecker[1317:507] TBTD ROM Version = 22.2
2014-12-09 11:29:48.187 TBTUpdateChecker[1317:507] Firmware not up to date.
2014-12-09 11:29:48.187 TBTUpdateChecker[1317:507] Will update route 3 with UID 00010001005d7070
2014-12-09 11:29:48.353 TBTUpdateChecker[1317:507] J59 at 'IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG0@1/IOPP/BR00@0/IOPP /BR10@A/IOPP/UFS0@0/IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL/AppleThunderbolt NHIType2/IOThunderboltController/IOThunderboltPort@5/IOThunderboltSwitchType2/IO ThunderboltPort@3/IOThunderboltPort@1/IOThunderboltSwitchType1' with UID = 0x00010001005abfe0 (0x0)
2014-12-09 11:29:48.353 TBTUpdateChecker[1317:507] Switch already has a valid UID (0x00010001005abfe0)
2014-12-09 11:29:48.354 TBTUpdateChecker[1317:507] UID did not need recovery
2014-12-09 11:29:48.354 TBTUpdateChecker[1317:507] Found TBTD at route 0x3
2014-12-09 11:29:48.354 TBTUpdateChecker[1317:507] Checking firmware version
2014-12-09 11:29:48.354 TBTUpdateChecker[1317:507] TBTD ROM Version = 22.2
2014-12-09 11:29:48.355 TBTUpdateChecker[1317:507] Firmware not up to date.
2014-12-09 11:29:48.355 TBTUpdateChecker[1317:507] Will update route 3 with UID 00010001005abfe0
2014-12-09 11:29:48.358 TBTUpdateChecker[1317:507] 0x156d Host ROM Version = 19.2
2014-12-09 11:29:48.358 TBTUpdateChecker[1317:507] Host EFI: 0116.B05
2014-12-09 11:29:48.359 TBTUpdateChecker[1317:507] 0x156d Host ROM Version = 19.2
2014-12-09 11:29:48.359 TBTUpdateChecker[1317:507] 0x156d Host ROM Version = 19.2
2014-12-09 11:29:48.359 TBTUpdateChecker[1317:507] Cannot update because of error 0xb

There is no "cover" on a MacPro. It is not a laptop. I tried updating one at a time. Failed with the same error.

Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

Hello Everyone,
When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
2010 sp3. Can anyone help me with this error?

I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
This is in the log;
[10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
'{ server.company.com }'
[10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
[10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
[10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
Internet services successfully stopped
Attempting start...
Restart attempt failed.
The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start. The service, or dependent services, may had an error during its startup or may be disabled.
Process standard error:
[10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
[10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
[10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
" was run: "Process execution failed with exit code 1062.".
[10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
[10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
[10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
Anyone has any ideas?

Tp import fails with error "data files not transferred"

Hi colleagues,
I am working on transport requests. I had issued out the tp addtobuffer SIDKxxxx <sid> pf=TP_DOMAIN_SID.PFL command for a number of transport requests at OS level; but when i then try to do tp import SIDKxxxxx <sid> client= u18 pf=TP_DOMAIN_sid.PFL, i get this error: "Data files are not transfered" in the QAS system. Everything works fine in PROD though. What could be the reason for this. I can't get it done within the application either.
Your responses appreciated.

Hi,
I guess you have individual transport directories. I f you have configured the Transport Domain and added the Other Two into the Domain and configured the Transport Route. You should be able to see the Some RFC Destinations in SM59.
TMSADM@<SID>.<DOMAIN NAME>
TMSSUP@<SID>.<DOMAIN NAME>
Please check the Test connection. of all these RFC Destination. If these fail check if you have firewall issues between the system stopping the communication on Port 33<Instance No>.
Thanks,
Tanuj

New DP on winsrv2012r2 - TS failing with error 0x80091007

Hi All,
I need your advice about a really weird issue. We replaced a 2008r2 file server which was also a DP in one of our remote sites it was working well. The new server is on 2012r2 and I reinstalled the DP on it. I need to precise that all of them are are
hosted on VMware 5.1 (esxi-vsphere). I distributed all the needed packages on this newly created dp and tried to setup a vm to test the task sequence and I noted that the win download was very very quick (3-4mins for a quite big wim
file 24gb). in my tests all attempts failed at the end of TS when applying system image with the error code 0x80091007. I need to precise that I choose the E1000 Nic in VMware and 4gb of memory so normally there should not be any issue. I tried also
with a vmxnet3 nic but it wasn't detected at the beginning of TS even if my boot image contains the VMware drivers ..(that's one of the weird point) . But the weirdest point is that I asked one of my colleague to give it a try and at his first attempt he was
successful using exactly the same vm I tried to setup ... but all is other attempts failed afterwards. Do you know what could be the cause ? Could it be linked to the fact that the dp was setup on 2012r2 when the primary site and all others sccm
servers are on 2008r2. Also our forest functional level is still on 2003 so am wondering if that could be the explanation.
Here are all the logs (failed and success one ) which were all from the same dp on 2012r2:http://www27.zippyshare.com/v/83975219/file.html
So after trying all ideas (Redistributing the images on the dp.. validating them... even recreated the dp completely I decided to setup a dedicated server on 2008r2 and it worked at first imaging attempt but I would like to understand what was the cause
if possible that's why I would like to get your advice on that. thx in advance. best regards.

Hi,
There error translates to "The hash value is not correct."
Have you seen this post on the topic.
https://social.technet.microsoft.com/Forums/en-US/77783490-82a9-4dd1-9ea8-ca11c37f3ee6/sccm-2012-osd-task-sequence-error-0x80091007?forum=configmanagerosd
Solving the vmxnet3 nic sounds like a neeeded solition.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

I have downloaded the Photoshop trial in CC when it gets to the updating stage it fails with error code 49

It told me to retry or contact support - I have retried several times & it keeps coming back to error code (49)

Generally, this error is caused by something running on the computer which may be locking files that are trying to be updated. First, try simply restarting the computer to close running applications and unlock all files. If that does not allow the update to complete, try disabling all applications which run in the background. Disable startup items, services | Windows or Start in Safe Boot mode | Mac OS X

New MBP 15", Windows installation fails with error 0x80070570 or 0x80070570D

Hey guys!
I finally got a new MBP a few weeks ago, and I wanted to install a Windows partition for some games. I have tried this with several different windows copies (both legal and illegal, and both of windows 7 and windows 8), but to none avail. The exact error message I keep getting is:
Windows 7:
"Windows cannot install required files. The file may be corrupt or mossing. Make sure all files required for installation are available, and restart the application. Error code: 0x80070570"
Windows 8:
"Windows cannot install required files. Make sure all files required for installation are available, and restart the application. Error code: 0x80070570D"
Any help will be greatly appreciated!

I've let the bootcamp utility put the disk images on the USB. As I mentioned before, I got the Windows installation images through various legal and illegal sources and made several attempts with each and evere disk image, so that should not be the cause.

Trying to assign Security Baseline fails with error 24001

We are trying to assign the Sample Security baseline updates to a cluster group in VMM.
We have followed the steps here
http://technet.microsoft.com/en-us/library/gg675110.aspx
But the job to assign the baseline fails with the following:-
Error 24001
Update server operation failed with error: The specified item could not be found in the database.
We are running VMM 2012R2 V 3.2.7510.0 on Windows Server 2012R2

Remove wsus from VMM and add it again.
This will fix the problem. Otherwise I Think cleaning SQL of missing update fixes the problem.

Updating hybrid configuration failed - Kerberos authentication: The network path was not found

I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
When I run the Manage Hybrid Configuration, I receive the following error:
Updating hybrid configuration failed with error
'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
path was not found.
The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
[1/5/2014 21:21:1] INFO:Opening runspace to
http://[servername]/powershell?serializationLevel=Full
[1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
[1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
   -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
   at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
   at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
   at System.Management.Automation.Runspaces.RunspacePool.Open()
   at System.Management.Automation.RemoteRunspace.Open()
   at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
   at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
I have sought help, posting on the forum at community.office365.com -
http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
Has anyone else come across this problem running the Hybrid Configuration Wizard?

Hello Darrell,
Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
looks good.
As the article states you can run the Exchange BPA and it will check if any of these exist as well.

Time Machine. Backup failed with error code: 21

Hi,
I recently upgraded to Leopard 10.5.4 mainly for the time machine backup. I'm using a DNS-323 in a RAID1 configuration as the TM backup drive. Also I have the DNS-323 connected to my Airport Extreme through the ethernet to give NAS ability to my home network.
After much hunting around the forums I got the sparsebundle created and copied to the DNS-323 share volume. See http://www.flokru.org/2008/02/29/time-machine-backups-on-network-shares-in-leopa rd/ My thanks to flokru.
However, TM is still not working. The console messages have the following:
Network mountpoint /Volume/Volume_1 not owned by backupd... remounting
Network volume mounted at /Volume/Volume11
Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle
Backup failed with error: 21
It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
Is there a way of making TM "own" the volume, Volume_1?
Has anybody else seen this error or better yet, got a fix for it?

James,
It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
Is there a way of making TM "own" the volume, Volume_1?
Actually, it is not TMs failure to mount the volume that is causing your failure to backup. I have received the same Console message using a Time Capsule. However, Time Machines' attempt to 'remount' the volume always succeeds and the backup goes through. That appears not to be your experience, but it is NOT because the volume is not being mounted. It is.
*Mount Point Conflict (TMDisk-1)*
NOTE: the following distinguishes “network drive” (the physical hard disk) from “disk image” (the sparsebundle file TM uses to backup to).
First of all, I am convinced that the second mount point that is created (in your case Volume11) is due to the fact that you already had the network drive mounted on your desktop at the time of the attempted backup. Was that the case?
When you manually mount a network drive the system creates a mount point in the /Volumes folder (Let’s call it TMDisk ). While that exists any attempt by Time Machine to mount the same disk will created a second mount point ( TMDisk-1 )
Nevertheless, as I have observed, this doesn't seem to prevent backups from taking place successfully, at least on the Time Capsule. And according to your Console logs it appears that your volume is being ‘remounted’ successfully.
*”The Backup Disk Image Could Not Be Mounted”*
The real issue is Time Machines' failure to mount the disk image (sparsebundle) contained on your network drive.
+Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle+
+Backup failed with error: 21+
More often than not this is due to having the Time Machine backup disk image (sparsebundle) mounted on your desktop during a backup attempt.
Eject the backup disk image (sparsebundle) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
For more information, see an article on this here:
[http://discussions.apple.com/thread.jspa?threadID=1715977]
Alternatively, a backup disk image can fail to mount if there is a problem with your computer name.
*Proper Computer Name* #
Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
According to THIS article [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
(0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
Let me know if any of this helps.
Cheers!

Loadlibrary failed with error 126 the specified module could not be found

Hello i get this error message at random when am using oracle sql developer, sometimes it comes right after startup, and some times after 5 mins.
the error closes down the program
please help

Searching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll".

Erazer X700 new BIOS update flash is failing with 4 - Error: Rom file ROMID is not compatible

Similar Messages

Maybe you are looking for