ERD Tool for Linux
Is there a reason why Oracle has refused to create an ERD tool that works on Linux?
Has anyone found a good Linux-based ERD tool?
I've heard some good things about aqua studio, which should also work under Linux.
C.
Similar Messages
-
Is there an ERD tool for JDeveloper? If not, how about a good 3rd party plug-in? I would like to have the power of ERWin from within my IDE. If Jdeveloper can do UML-to-Java, I would think it could do ERD-to-OracleDB.
JDeveloper 9.0.3 is one of the best IDE's I have seen that has the potential to go head-to-head with MS Visual Studio .net.
** Good Job Oracle **William,
Thanks for your question and encouragement.
Right now, there is no database modeling solution in JDeveloper, and I am not aware of any plug-ins in this area.
However, we do acknowledge the importance of this functionality, and are currently working on a DB modeling solution. This work is targeted at the next major release of JDeveloper (10i). In addition to generating and reverse engineering Oracle DBs, the tool will also enable users to link these models to EJB and BC4J designs.
Thanks, Guus
Product Manager UML modeling -
Surround Test Tool for Linux?
Hello,
since I changed to Linux some years ago, my surround 5.1 Sound isn't working. Atm it seems that only the left front channel is used. I had a look into alsamixer but it's hard to judge which channel is or is not working. Under windows there was a little tool for my soundcard (Realtek ALC650F) which played a sound on every channel one after another - it was easy that way to check which channels were working. Is there something comparable for Linux?
Thank you
cl10kman speaker-test.
Last edited by Wintervenom (2010-02-11 07:05:40) -
Overclocking tools for Linux?
morning,
i am looking for some Over/Underclocking tools for CPU / RAM / FSB etc.
Windows has billionQuadtrillion OverClocking Tools, and what is with Linux?
Can someone tell me a linuxoverclocker Site?
Can someone tell me tools for my Athlon 64 (X2) NForce4 Board or for my Laptop.
Under Windows is Notebook Hardware Controll http://www.pbus-167.com/chc.htm awsome it change CPU Voltage and can some more then 30 Minutes Battery.
thank you for any answersydney wrote:
Thanks its a begin, i hope it comes more respond.
I will try the Pentium-M Patch.
For my 6800 i am using nvclock (works fine) but thanks for the tipp.
hi, I got a nvidia 6800 go (laptop)
I don't use nvclock, I use the nvidia-settings (you can do it if you read how to tweak nvidia's drivers)
(Arch Wiki) Tweaking nvidia drivers
you got my xorg.conf here:
http://bbs.archlinux.org/viewtopic.php?id=63225 -
Using Command Line Tool for Linux
I have to use the command lines of Linux for SCM commands(like repcmd, set workarea, checkin etc...)
should I have to install something?
I have documentation for using the oracle repository command line Toll for Windows and Unix, but I didn't found anything about using the oracle repository command line Toll for Linux.JDeveloper runs excellent on Linux and is supposed to be able to use the repository, but that's a GUI...
-
Know of an uzip tool for Linux
Can anyone recommend a zip tool on Linux that is guaranteed to decompress zip
files downloaded from java.sun.com (notably the J2SE docs)?
This is in reply to the following javadoc forum question:
http://forum.java.sun.com/thread.jsp?forum=41&thread=370653&tstart=0&trange=30Being a java forum it only seems reasonable to mention that jar will unzip a .zip file. .zip and .jar formats are (or at least started out to be) identical.
JDB
SCJP/SCWCD -
I need to give a webinar in a few hours. I need to demo a website for a new
client and he asked for a webinar. To be honest I have never been
involved in a webinar--neither as host nor participant. He suggested
GoToMeeting but that requires Mac or Windows apparently.
Anybody know what tool I could use for this? Not sure what he has but
it ain't Linux, that's for sure. Actually I am pretty sure he has Windows.My online school uses Elluminate for their webinars, and it works quite well with Linux as long as you have Sun's version of Java installed. Very few issues with it overall.
-
Developer? jDeveloper?
When?
Any news?
nullHi tmx,
You can connect your PlayBook to Linux with both USB and Wifi.
The trick is to access it like a network device both ways.
USB method:
1. Plug in the PlayBook to your system and make sure that file sharing is set to 'Mac'.
2. In the network icon you should see a new connection appear. If not, click on the icon and look at connection information.
3. You should have a USB network device with an IP address of something like 169.128.123.123. Make a note of this number, and subtract 1 from the final 3 numbers for the next step.
4. Open your home folder (Nautilus) and in the location bar type in smb://169.128.123.122 - based on your address that you wrote down in the last step. You have to subtract 1 to connect to the PlayBook like I did in my example.
5. You should see the PlayBook appear as a 'Windows share', in there is the 'media' folder. Double-click and the PlayBook will be mounted as a network disk.
I know it's a bit fiddly, but once you've done it a few times it's really simple. I've been meaning to write a script to automate this... When I eventually get around to this I'll post it here
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you! -
StorEdge monitoring tool for linux
Hello,
I have StorEdge 3310 SCSI array. Is there any way to monitor it from Linux? The best would be CLI interface.
Best Regards
Maciej BoguckiMaciej,
I suggest you also glance at another storage-related Sun forum.
There is a link to it at:
http://forum.sun.com/index.jspa
... near the bottom of that page.
My perception is that very few of the participants in these HARDWARE forums are using Linux in there daily administration of their Sun storage products.
The postings here are more for issues with the hardware pieces of equipment and not necessarily for whatever software may be used. -
Pls help me to find admin tool for latest bi linux version
Hello,
Oracle Business Intelligence, v. 11.1.1.5.0
I installed the latest version of OBIEE of linux version 64 bit on the server.
Installation went fine.
Now the only problem is finding Admin tool.
Could u pls tell me where its sitting.
I know i Windows it Admintool.exe
ThanksHi user,
Firstly you wont have admin tool for linux environment....you need to install the client on windows local machine and access the BI server of linux by setting up a connection.
So you need to download 64-bit or 32-bit windows one to install http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/biee-111150-393613.html
Read this document :- http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10539/c5_postinstall.htm#CEGEHEJF
hope answered your question.
Cheers,
KK -
Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbienewbie2007 wrote:Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbieEverything should work, except for the target pack and the non-existent Linux Pegoda driver.1. The is no seperate Linux distribution. You just need a Linux distribution for Eclipse.JCOP Tools plugin should work under Linux, except for the target pack and the non-existent Pegoda driver for Linux.1. There is no seperate Linux distribution. You just need the Linux distribution for Eclipse.
2. Prior to JCOP Tools 3.1.2 the last time something was mentioned about Linux was in the release notes of 3.1.1b . In version 3.2.0 IBM added a linux_support page to the JCOP Tools user guide (see release notes and linux_support page below).
3. There shouldn't be any problems with the generic simulation. The target pack runs only with Windows though.
h1. Release Notes
h2. Version
JCOP Tools 3.1.1.b (Bärlach)
h2. What's new?
h3. 3.1.1.b
<ul><li>New simulation (fixed static obj/arr bug, fixed instance field token bug).</li>
<li>Applet privileges can now be specified in the launch configuration dialog.</li>
<li>The "exportmap" feature is now available.</li>
<li>The JCOP Performance Test Demo ("JCOP Factor") is now included.</li>
<li>Minor bug fixes.</li>
</ul>
h2. Known problems
<ul><li>Simulations do not run (Linux, MacOS X)
The Eclipse update manager does not set the execute permission bits for the simulations. You need to manually <code>chmod 755</code> those files in ECLIPSE/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.x/simuls/
</li>
<li>PC/SC Support (Linux)
JCOP Tools only works with pcsc-lite 1.2.0.
</li>
</ul>
h2. Frequently Asked Questions
Please refer to the online FAQ at http://www.zurich.ibm.com/jcop/download/eclipse/faq/.
h2. Bug Reports
Please send bug reports to [email protected]. Make sure you include the following:
<ul><li>Problem description</li>
<li>Steps to reproduce</li>
<li>Eclipse version and build number (Help > About)</li>
<li>JCOP Tools version (Help > About; click on BlueZ icon)</li>
</ul>
h2. Using JCOP Tools with Linux (>= 3.2.0)
h3. ___
Overview
The current JCOP Tools release now also offer a version for the popular Linux
operating system. Both the Windows and Linux verson provide more or less the same
functionality, and JCOP application development can thus fully succeed on Linux systems.
Nevertheless, installation of the JCOP Tools differ between Windows and Linux
where the Linux version does not provide a simple installer as in case of Windows.
Additionally, the Linux version expects a properly setup Muscle PCSC installation
as soon as you want to use them together with physical, real cards. As Muscle
PCSC is still not shipped with most Linux distributions, you must download and
install them separately from the JCOP Tools.
h3. ___
Contents
h3. ___
Software Requirements
Linux distribution
The JCOP Tools simulation has been developed on a Fedora Core 6 system, but should also work in case of
many other recent Linux distributions.
Java Development Kit
The JCOP Tools have been developed and tested with the Sun JDK 1.4.2_13-b06
for Linux. Your success with other Development Kits may vary as there are
partly subtle differences across the different devlopment kits.
PCSC
The JCOP Tools use PCSC to talk with real cards on Linux. Most distributions
do not ship with Linux PCSC by default (Fedora Core 6 does), you must thus download it fromhttp://www.linuxnet.com
and install it by yourself. If you are used to software installation under Linux,
and are not afraid of compiling and installing software packages, this should
not be a hard problem. You have to download both the base PCSC package
(including PCSC daemon and client libraries) and separately the driver
for the reader you want to use. The PCSC package contains a test program
which should tell you whether your installation is set up correctly and
communicating with a card works. The JCOP Tools have been reported to
work together with Muscle PCSC version 1.3.1-7.
JPCSC
The JCOP Tools are shipped with JPCSC which you can also download athttp://www.linuxnet.com. JPCSC
is a JNI library which offers Java applications the access to PC/SC functions
by mapping their requests to an underlying native PC/SC implementation. The JCOP
Tools - mostly written in Java - thus depend on JPCSC to communicate with real cards
on Linux. JPCSC depends on a properly installed and setup PC/SC environment.
Especially, the JAVA_LIBRARY_PATH should list the directories where the
PC/SC client libraries and the native JPCSC library libjpcsc.so ( downloadable as binary from
Windows Binary Download Here )
are installed, the CLASSPATH variable should list th___
Miscellaneous
What should work
As soon as you setup your system correctly, there should only be minor differences
between using JCOP Tools on Windows or on Linux. Emulating a real JCOP,
debugging, shell, cap-file conersion should all be possible as in case of Windows.
What is missing
No drivers or tools are currently available for using JCOP30's in contactless
mode. If you need such support, please contact directly NXP
at for further assistance.
Copyright 2001,2007 IBM Corp. All rights reserved.
Edited by: lexdabear on Sep 28, 2007 4:13 PM (I hate the new edit) -
LightScribe for Linux!!!
Finally!!!
LaCie LightScribe Labeler for Linux is simple and intuitive, allowing users to burn customized images on to LightScribe discs in three easy steps: import, resize, print. K3b Founder Sebastian Trueg said, "We're happy to see that LaCie is developing tools for Linux users, and are pleased to work with them to make it happen. With the LaCie LightScribe Labeler for Linux, K3b users now have access to the latest disc-labeling technology from LightScribe, and a complete burning solution thanks to LaCie."
Press release
Home page
Downloads:
LightScribe Host Software v1.4.113.1 for Linux
LaCie LightScribe Labeler for Linux (both are RPMs)
Screenshot
Manual (PDF)
UPDATE: There is a package request already. I didn't notice it when posted, should I remove this topic?Use rpmextract to extract the files from the rpm. Then, it's just a question of installing the files in the correct place (in $startdir/pkg), i.e. binaries in /usr/bin, libraries in /usr/lib, etc.
-
4L (LaCie's LightScribe Labeler for Linux) : advice wished!
As K3b Founder Sebastian Trueg said, "We're happy to see that LaCie is developing tools for Linux users, and are pleased to work with them to make it happen. With the LaCie LightScribe Labeler for Linux, [Linux] users now have access to the latest disc-labeling technology from LightScribe."
http://www.k3b.org/
I'm making the PKGBUILDs but some advice on the process would be helpfull
So far, installed with those PKGBUILDs, 4L-gui launches on my Arch (but seems to lack some functionnality) and 4L-cli segfaults even if it prints the options.
_Be aware that those PKGBUILD are not finished yet_
LightScribe Host Software v1.4.113.1 for Linux
# Contributor: kozaki <kozaki>
pkgname=lightscribe
pkgver=1.4.113.1
pkgrel=1
pkgdesc="LightScribe Host Software v1.4.113.1 for Linux"
url="http://www.lacie.com/company/news/news.htm?id=10293"
license=('custom')
depends=('libstdc++5')
makedepends=('rpmextract')
depends=(rpmextract)
source=(http://www.lacie.com/download/drivers/lightscribe-1.4.113.1-linux-2.6-intel.rpm)
md5sums=('9a692c0fa12501598d5c495f028e2a3e')
build() {
# Extract RPM
rpmextract.sh $pkgname-$pkgver-linux-2.6-intel.rpm
# Copy binaries and data files
install -d $startdir/pkg/etc
install -d $startdir/pkg/usr/lib/lightscribe/{res,updates}
# or : install -d $startdir/pkg/opt/lightscribe/{res,updates} but needs to modify etc/lightscribe.rc
install -d $startdir/pkg/usr/share/doc
cp etc/lightscribe.rc $startdir/pkg/etc
cp usr/lib/liblightscribe.so $startdir/pkg/usr/lib
cp usr/lib/liblightscribe.so.1 $startdir/pkg/usr/lib
cp -R usr/lib/lightscribe/res $startdir/pkg/usr/lib/lightscribe
cp usr/lib/lightscribe/updates/fallback.sh $startdir/pkg/usr/lib/lightscribe/updates
find $startdir/pkg/usr/lib -type f -exec chmod 644 {} ;
find $startdir/pkg/usr/lib -type d -exec chmod 755 {} ;
chmod 755 $startdir/pkg/usr/lib/lightscribe/res/*
chmod 755 $startdir/pkg/usr/lib/lightscribe/updates/fallback.sh
cp usr/share/doc/lightscribeLicense.rtf $startdir/pkg/usr/share/doc
LaCie's LightScribe Labeler for Linux
# Contributor: kozaki <kozaki>
pkgname=4l
pkgver=1.0r6
pkgrel=1
pkgdesc="LaCie's LightScribe Labeler for Linux"
url="http://www.lacie.com/company/news/news.htm?id=10293"
license=('custom')
depends=('fontconfig' 'lightscribe')
makedepends=('rpmextract')
source=(http://www.lacie.com/download/drivers/4L-1.0-r6.i586.rpm)
md5sums=('11fc8b2daeaed2b61a567056413bdefd')
build() {
# Extract RPM
rpmextract.sh 4L-1.0-r6.i586.rpm
# Copy binaries and data files
install -d $startdir/pkg/opt/4L/{doc,templates,translations}
install -d $startdir/pkg/usr/bin
cp usr/4L/4L-cli $startdir/pkg/opt/4L
cp usr/4L/4L-gui $startdir/pkg/opt/4L
cp usr/4L/lacie_website.sh $startdir/pkg/opt/4L
cp usr/4L/doc/4L_User_Manual.pdf $startdir/pkg/opt/4L/doc
cp -R usr/4L/templates $startdir/pkg/opt/4L
cp -R usr/4L/translations $startdir/pkg/opt/4L
find $startdir/pkg/opt/4L -type f -exec chmod 644 {} ;
find $startdir/pkg/opt/4L -type d -exec chmod 755 {} ; # what about the bit SUID on 4L-cli ?
chmod +x $startdir/pkg/opt/4L/4L-cli
chmod +x $startdir/pkg/opt/4L/4L-gui
ln -s /opt/4L/4L-cli $startdir/pkg/usr/bin/4L-cli
ln -s /opt/4L/4L-gui $startdir/pkg/usr/bin/4L-gui
etc/lightscribe.rc :
ResourceDir=/usr/lib/lightscribe/res;
UpdateScriptDir=/usr/lib/lightscribe/updates;
4L-1.0-r6.i586.rpm has 4L-cli with a bit SUID :
-rwsr-xr-x 1 kozaki users 60540 aoû 10 15:20 4L-cliwww.k3b.org wrote:Although [LaCie] wanted to support the development of an Open-Source software, licensing issues always stood in the way of that. Now they released the Closed-Source but free LightScribe Labeling application 4L for Linux and it is about time Linux users get to use LightScribe
Remember lightscribe is HP patented.
Romashka > Hi
Yeap, it seems using LightScribe on Arch may be a little more complicated than just to put the .rpm's files into AL...
I think I missed some dependencies; may someone confirm this ?
$ ldd /usr/bin/4L-cli
linux-gate.so.1 => (0xffffe000) liblightscribe.so.1 => /usr/lib/liblightscribe.so.1 (0xb7e5d000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7e4a000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb7d69000)
libm.so.6 => /lib/libm.so.6 (0xb7d44000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb7d38000)
libc.so.6 => /lib/libc.so.6 (0xb7c17000)
libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0xb7b5f000)
/lib/ld-linux.so.2 (0xb7fd7000)
$ ldd /usr/bin/4L-gui
linux-gate.so.1 => (0xffffe000)
libXi.so.6 => /usr/lib/libXi.so.6 (0xb7ede000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0xb7ed5000)
libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0xb7ed1000)
libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0xb7ec8000)
libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0xb7ec4000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb7e4c000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb7e22000)
libXext.so.6 => /usr/lib/libXext.so.6 (0xb7e14000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb7d28000)
libdl.so.2 => /lib/libdl.so.2 (0xb7d24000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7d10000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb7c2f000)
libm.so.6 => /lib/libm.so.6 (0xb7c0a000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb7bff000)
libc.so.6 => /lib/libc.so.6 (0xb7ade000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0xb7ad9000)
libz.so.1 => /usr/lib/libz.so.1 (0xb7ac6000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb7aa7000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb7aa4000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7a9f000)
/lib/ld-linux.so.2 (0xb7f03000) -
Using the Oracle Repository Command Line Tool under Linux
I have to use the command lines of Linux for SCM commands(like repcmd,
set workarea, checkin etc...)
should I have to install something?
I have documentation for using the oracle repository command line Toll
for Windows and Unix, but I didn't found anything about using the oracle
repository command line Tool for Linux.JDeveloper runs excellent on Linux and is supposed to be able to use the repository, but that's a GUI...
-
MII Migration tool for server installed in Linux
I am planning to migrate few files from xMII 11.5 to 12.0. I searched in market place to download the migration tool(service.sap.com -> SAP Support Portal -> Downloads -> SAP Installations & Upgrades -> Search for Installations and Upgrades.
Entered XMII MIGRATION TOOL in the search field) which can be used from my windows laptop. But, its not available.
I also searched for the components which can be deployed in Netweaver to obtain the migration tool(service.sap.com -> SAP Support Portal -> Downloads ->Entry by application group->Support Packages and Patches...SAP xApps...SAP XMII...SAP XMII...SAP XMII 12.0...XMII MIGRATION TOOL 1.0). But, these components are only available for Windows server.
Let me know whether this is because of authorizations/permissions of my id. Is there a place where I can download either the migration tool or the components for linux?The Migration Tool is a windows only application - so are the files from your 11.5 system for that matter
You'll need to download the tool, run either the SDM or JSPM tool of NetWeaver to extract the zip file from inside the SCA file. This zip file can then be extracted onto your laptop where the java app can run to take the desired 11.5 source files and migrate them into your 12.0 server via http.
Maybe you are looking for
-
Did CUP risk analysis change with SP7?
Dear GRC experts, I am pretty sure when we tested CUP 5.3 SP4 when doing risk analysis it would only show new risks caused by new roles selected in request (like Risks from Simulation Only YES in RAR). Exisitng risks for that user would not be shown.
-
How deep into a windows directory can Mac access?
Well, after moving, and attempting to move numerous files (from a networked XP laptop, with an externally USB mounted hdd), I've found that there are some files that it will not allow me to move. I get the same error message-- not having sufficient p
-
Curve 9320 and Blackberry Playbook
I'm having issues pairing my device (9320) with my new Blackberry Playbook. The software on my phone is 7.1 Bundle 2039. I can pair both devices together through Blackberry Bridge but it shows that I've recieved new emails but doesnt let me open them
-
Wfen i restored my mac to factory settings having upgraded from os x10.7.3 to 10.8 i lost imovie garage band and iphoto. are they just hidden and can be retrieved and how? or not,
-
Locking clips, adding slideshows from iphoto to imovie and reverting clips.
I have a few questions about imovie HD 6. 1. I am working on adding snips of video and pictures to my imovie project. However, I have several small clips that I want to add to a single audio clip. Is there a way to lock several video clips to my audi