Ereasing Master Files - Very Slow Process, why?

Hello there,
I usually edit my archive with Aperture. When I select a large amount of images and click erase versions & master files, it just takes a very very long time. So long, that you think the computer crashed. To erase 180 images, took at least 5 min!!
I have set up my Aperture Library on an external hardrive. I am wondering if this has to do with the problem I am encountering when I need to delete a large amount of images at once.
Any suggestions for a better and faster performance?

Florian_S wrote:
Hello there,
I usually edit my archive with Aperture. When I select a large amount of images and click erase versions & master files, it just takes a very very long time. So long, that you think the computer crashed. To erase 180 images, took at least 5 min!!
I have set up my Aperture Library on an external hardrive. I am wondering if this has to do with the problem I am encountering when I need to delete a large amount of images at once.
Any suggestions for a better and faster performance?
hi, florian
for faster performance use a 7200rpm hard drive, firewire 800, with 16-32mb cache and keep a healthy amount of free space (headroom) on all your drives.
btw, just in case you are not aware if you use the Vault -- the Vault will make a folder with your deleted photos so you'll have to delete that too.
victor

Similar Messages

Master is very Slow, Because Slave Takes 20 minutes for "startup done"

I have two db env to be backup for each other. I stopped one db env for 5 minutes, then restarted it. I found that it took over 20 minutes to receive the db callback event "startup done". During these time, there were transactions in the master db env. I guess this makes the sync_up process take so long time.
I used the ack policy "DB_REPMGR_ACKS_ONE_PEER" and used "txn no sync" flag for transaction, so during these 25 minutes, master is very slow.
My requirement is master can resume its performance as soon as slave comes back. Can slave accept the log before its sync completed? Or any other way to solve this issue?

Most likely what happened is that the stopped dbenv is the only site/peer able to
send the acknowledgement. If it is stopped but not disconnected, then the master
will wait the full ACK timeout for every txn.
It is also likely that during that 5 minutes, log files were archived and when the
stopped dbenv became active again, it had to perform an internal initialization
from scratch. That copies over every page of every database and then the logs
needed to resynchronize. If you have a lot and/or very large database files,
that can take a long time.
The client cannot send any acks until it completes its synchronization. One
way to avoid this would be to perform a manual hot backup to the client before
starting up the application. You would have to copy over all database files, then
all log files from the master (in that order) and then run catastrophic recovery
in that client directory. Then start up your application and the client should be
able to quickly synchronize.
You can control this in the application by setting DB_REP_CONF_NOAUTOINIT
to DB_ENV->rep_set_config. You'll get back an error that tells you that the site
needs an re-initialization and you can do that copying then.
Sue LoVerso
Oracle

Healing brush/Clone stamp tool and others very slow processing

Healing brush/Clone stamp tool and others very slow processing. System resources monitor shows only 700MB (of 5GB allocated to Photoshop) RAM and 30% CPU is used to perform such tasks as healing brush. Process bar comes up and is painfully slow to complete the task. I don’t understand why does Photoshop not use all the resources available/allocated? No other programs are running at the time, I have tried all the suggestions on this forum and all over the Google. My brand new system is: Intel I7 4770K overclocked to 4.3GHz, 8GB 1600 RAM, Samsung PRO 120GB SSD system drive, 100GB scratch disk. The photos I usually work on don’t exceed 20MB in size. Any suggestion would be appreciated. Thanks

Thanks for the answer.
I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
I'll try to get the Photoshop system info as soon as possible.
Thanks again.
Zee

Very slow processing on LSMW and IFS access

Hi all,
we have a very slow processing on LSMW and IFS access. I believe it was slow all the time in the past. This LSMW transaction only converts some data, which are stored in a flat file in the IFS and stores it again into a flat file in the IFS. It is reading the data from IFS and writing again the data into the IFS.
IFS is not fast, I know. But do you have an similar experiences with such LOAD ?!
R/3 Enterprise 4.70 shows with transaction SM50 the following lon running job:
4 BGD 65988    waiting         Yes
5 BGD 65989    waiting         Yes
6 DIA 85421    running         Yes                    1      SAPLTHFB   100 USER1
7 DIA 65993    running         Yes                    11500 /1CADMC/SA 100 USER2
8 DIA 65994    waiting         Yes
9 DIA 65995    waiting         Yes
The WRKACTJOB Display shows:
This means for me the job is not doing so much with the database. Only 439 I/O's in 21 minutes. This is nothing. I have tried to give to this job Priority 19, but this is not the reason, the job is not going faster.
Work with Active Jobs
02.07.08 1
CPU %:    89,0     Elapsed time:   00:21:25     Active jobs:   895
Subsystem/Job Type Pool Pty      CPU Int    Rsp AuxIO CPU %
      WP06         BCI     2   20     395,2                136    0,0
      WP07         BCI     2   19   10274,0                439   12,7
      WP08         BCI     2   20    1156,0                  8    0,0
      WP09         BCI     2   20     874,3                  6    0,0
The WRKSYSSTS Display shows: This means for me, the is no memory lack.
Sys      Pool   Reserved    Max ----DB----- --Non-DB--- Act-   Wait- Act-
Pool    Size M   Size M     Act Fault Pages Fault Pages Wait   Inel   Inel
1    5000,00   1448,43 +++++    0,0   0,0    0,4   0,5   94,9    0,0    0,0
2   60340,00     44,65   3500   51,6 6335 113,4 364,1   7887    0,0    0,0
3     128,00      0,00     10    0,0   1,3    0,2   0,8   17,2    0,0    0,0
The WRKDSKSTS Display shows no problem in DASD.
I/O   Request   Read Write   Read Write    %
Rqs Size (K)    Rqs   Rqs     (K)   (K)   Busy
11,5     12,4     3,0    8,4   13,2   12,1     2
13,2     10,2     1,5   11,6    7,0   10,6     1
10,6      8,8     3,5    7,0    8,2    9,2     2
13,8     12,4     4,2    9,5   10,1   13,5     2
8,3     71,3     7,5    0,8   78,4    7,4     5
17,7    123,6    17,5    0,2 125,2    4,0     9
27,0     83,1    25,7    1,3   87,1    4,3    10
26,9     95,0    25,6    1,3   99,6    5,8     9
16,9    115,4    16,2    0,7 120,3    4,0     8
37,3    116,7    37,0    0,2 117,3   18,0    13
21,4     94,0    20,3    1,0   98,6    6,2     7
12,7     72,8    11,5    1,1   77,6   26,8     6
13,5     85,1    12,3    1,1   92,0   12,8     5
Any idea, here ???
best regrads,
Carsten Schulz
Teamleader SAP-Basis, ebmpapst Mulfingen, Gemany

Hi together,
thanks for answering so fast.
The jobs read from the sysbas-IFS   /usr/sap/a/b/ and writes to /usr/sap/SID/DVEBMGS00/work/ also in the sysbas-IFS.This IFS is not remote. Not through the QfileSrv.400 mechanism.
And yes, we have a HA solution. We have two IASP's on two different iSeries and are using XSM to mirror the data.
I have tried to increase the speed by switching off the XSM mirroring, but the speed does not increase. Sorry.
best regards,
Carsten Schulz

HT5012 My iphone 5c was very slow processing,please help me?

My iphone 5c was very slow processing and my setting not working properly please help me
And my iphone 5c apps was crashing again and again..

Try > http://support.apple.com/kb/TS1538

Excel file very slow to save - but only for one user! Why?

The problem ...
I have an excel spreadsheet that I share with my partner, i.e. another user on my Mac. The file works just fine for me, but is very slow to save when my partner uses it. Save time for me is about 3 seconds, for my partner about 45 seconds. The problem only seems to be with this one file, and the slow save time is driving her nuts! (I'm not able to upload the file as it contains confidential info).
The file is about 225kB with about 6 worksheets and some macros. It’s stored in a folder below the standard OSX ‘shared’ folder. Both users have identical permissions on these folders and this file.
What have I tried already? Re-saving the file in a different place, renaming it, re-creating it by copying the contents to a blank file, repairing permissions on my partner’s user account, copying excel .plist files from my user to hers, deleting her .plist file & creating a new one. None of these have worked.
System details ... 2.8GHz I5 iMac (late 2010 vintage), 8GB memory, OSX 10.6.8 (Snow Leopard). Excel for Mac 2011 v14.2.3 (auto updates on & all installed I believe)
Any suggestions would be gratefully received.

On the problem Mac...
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

USB Flash Drive (with password protected Disk Image) copies files very slowly. Why?

I'm backing up some data onto a 32GB flash drive that I've put a password-protected Disk Image onto, and am copying this data into, but it is achingly slow. It's taking hours to copy just 500MB!
I have another 64MB flash drive that I have set up the same way, but this one copies files very quickly. I can't spot any difference between them in Disk Utility/System profiler.
For the record, the process I've used for bothe drives is reformatted to Mac OS Extended (Journaled), then created a new Disk Image onto each drive (just a bitsmaller than the maximum size of the drive to enable it to fit) with 128--bit encryption.
Does anyone have any idea why the 32GB drive would perform any differently? I am using the same USB port on my iMac for each drive, but am getting very different copying speeds. It's driving me nuts! Many thanks.

The drive seems to be working fine if I copy files onto it outside of the Disk Image file (there's about 200MB of free space left over after I added the DMG). So I can only deduce from that that it is something specifically to do with the DMG itself. Though, as mentioned, I compared the DMG on my (fast) 64GB stick and the DMG on this problematic (slow) 32GB stick in Disk Utility/System Profiler (and I originally set them up in an identical way, as far as I am aware), and they seem to be the same. But one is performing achingly slow. Even dropping a file into the mounted DMG takes a few minutes to even think about it. It's very odd.

New iMac very slow? why?

Hi,
I have recently bought brand new iMac 21,5" 2,7 Ghz i5 with 8GB ram and 1 TB memory. I have transfered all data from Time Machine backup. And my computer is very very slow with apps, expecialy when it wakes up from sleep. I turn on safari, illustrator and photoshop and it takes 10 minutes to became normal. If I open mail it is very very slow. Also, twitter app. I don't know where the problem is. It is brand new computer. It has all the power. I have checked "verify disk" and everything is ok. I have repaired all permissions, and still nothing. iPhoto is extremely slow but its just iPhoto, very bad program.
But after 5-10 minutes after wakeup iMac starts to behave normal. When Photoshop is turned on (after 5-10 min) it starts to act normal. Sometimes excel doesn't won't to turn on. Mouse icon turns rainbow circle and nothing. I force quit it and start again and after 2-3 minutes it opens.
Does anybody have an idea what should i do?

Thank you. Here are info:
EtreCheck version: 1.9.12 (48)
Report generated 24. jun 2014. 20.01.32 GMT+2
Hardware Information:
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,1
1 2.7 GHz Intel Core i5 CPU: 4 cores
8 GB RAM
Video Information:
Intel Iris Pro - VRAM: (null)
iMac 1920 x 1080
System Software:
OS X 10.9.3 (13D65) - Uptime: 8 days 12:39:22
Disk Information:
APPLE HDD ST1000LM024 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 999,35 GB (294,02 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
A4TECH USB Device
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.devguru.driver.SamsungACMControl (1.2.32) Support
[not loaded] com.devguru.driver.SamsungACMData (1.2.32) Support
[not loaded] com.devguru.driver.SamsungComposite (1.2.32) Support
[not loaded] com.devguru.driver.SamsungMTP (1.2.32) Support
[not loaded] com.devguru.driver.SamsungSerial (1.2.32) Support
[not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
[loaded] com.iospirit.driver.rbiokithelper (1.21 - SDK 10.6) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items:
CandelairPrefsTool: Path: /Library/StartupItems/CandelairPrefsTool
HP IO: Path: /Library/StartupItems/HP IO
HP USB EWS Gateway: Path: /Library/StartupItems/HP USB EWS Gateway
HPlaserjet Trap Monitor: Path: /Library/StartupItems/HPlaserjet Trap Monitor
Problem System Launch Daemons:
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.iospirit.candelair.daemon.plist Support
[loaded] com.iospirit.candelair.sync.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
[running] com.rim.BBDaemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid] com.oracle.java.Java-Updater.plist
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.divx.agent.postinstall.plist Support
[running] com.plexapp.helper.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items:
iTunesHelper
iTunesHelper
Vuze
Skype
Mail
Dropbox
Messages
Safari
Google Drive
Viber
Dropbox
HP Utility
Calendar
Slack
Twitter
fuspredownloader
HPEventHandler
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 5.2 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
DFusionWeb: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
OnLiveGameClientDetector: Version: OnLiveGameClientDetector 1.0.0 Support
AdobePDFViewer: Version: 10.1.10 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
ViewRightWebPlayer: Version: 3.5.2.0 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
GMail Counter: Version: 0.9.3
Slick Savings: Version: 1.0
Slick Savings: Version: 2.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.182
Amazon Shopping Assistant: Version: 1.1
Searchme: Version: 1.3
Ebay Shopping Assistant: Version: 1.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Picasa: Version: 1.0 Support
fbplugin_1_0_1: Version: (null) Support
fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes:
Adobe Version Cue CS4 Support
Candelair Support
Flash Player Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 656.88 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 62
Oldest backup: 2013-12-05 23:05:33 +0000
Last backup: 2014-06-24 15:11:21 +0000
Size of backup disk: Too small
Backup size 2 < (Disk used 656.88 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      18% Twitter
      14% Viber
      3% WindowServer
      2% Console
      1% JavaApplicationStub
Top Processes by Memory:
672 MB Adobe Illustrator
410 MB Finder
254 MB Viber
246 MB Safari
172 MB JavaApplicationStub
Virtual Memory Information:
53 MB Free RAM
3.12 GB Active RAM
3.04 GB Inactive RAM
1.18 GB Wired RAM
18.21 GB Page-ins
2.35 GB Page-outs

Dreamweaver CC opening files very slow iMac with Fusion drive

I am working on a small website based off on Bootstrap 3. Now that I am almost done with the project opening files take a few seconds to open them (in code view). I have tried the various fixes like resolveremoteurltoipaddress=FALSE but still the files load very slow. On my Windows Machine it loads very fast and that machine is 4 years old. The iMac I am using at work is the latest version with decked out specs and only Dreamweaver CC and Edge Code have very slow opening of files. Creating new documents inside Dreamweaver CC is fast. Is there a way to make Dreamweaver open files faster? How to make it load faster, open documents faster, especially in code view. My initial thought is maybe its because I am linking to a few JS library like TypeKit and jQuery but I have not experience these problems on my Windows PC. Any help would be appreciated.

I am working on a small website based off on Bootstrap 3. Now that I am almost done with the project opening files take a few seconds to open them (in code view). I have tried the various fixes like resolveremoteurltoipaddress=FALSE but still the files load very slow. On my Windows Machine it loads very fast and that machine is 4 years old. The iMac I am using at work is the latest version with decked out specs and only Dreamweaver CC and Edge Code have very slow opening of files. Creating new documents inside Dreamweaver CC is fast. Is there a way to make Dreamweaver open files faster? How to make it load faster, open documents faster, especially in code view. My initial thought is maybe its because I am linking to a few JS library like TypeKit and jQuery but I have not experience these problems on my Windows PC. Any help would be appreciated.

Firefox 5 if installed, gmail becomes very slow. Why?

I was installed fire fox 5. But my G mail was running very slow. Also browsing speed was slower down. so again i installed the previous version of fire fox. Why fire fox 5 is not running with Google search engine?

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker.

Flash player loading files very slow and getting stuck after 100%

Hello all,
I have an issue with my development and need your help and feedback for the same:
I have developed various E-Learning courses which was published some in Flash Player 9 and some with version 10. Since Flash Player 10.1 was introduced all my developed courses was running fine. But it's found that user who are using Flash Player 10.1.85.3 is facing issue with file loading and playing the courses. Some time Flash player fails to load the chapters and files after preloading 100%, and sometime it's very slow in loading performance. I like to intimate that all these was not happening with Flash player version 10. Please give me any idea where I am going wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
Please Note: I have faced an scenario that, suppose a user is stuck with loading the course, and after getting stuck he clear his browser cache, and immediately after that the same player start working fine. And loading the course chapter properly. Need help to get rid of this kind of situation.
Thank you
Amitava D

Hello all,
I have an issue with my development and need your help and feedback for the same:
I have developed various E-Learning courses which was published some in Flash Player 9 and some with version 10. Since Flash Player 10.1 was introduced all my developed courses was running fine. But it's found that user who are using Flash Player 10.1.85.3 is facing issue with file loading and playing the courses. Some time Flash player fails to load the chapters and files after preloading 100%, and sometime it's very slow in loading performance. I like to intimate that all these was not happening with Flash player version 10. Please give me any idea where I am going wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
Please Note: I have faced an scenario that, suppose a user is stuck with loading the course, and after getting stuck he clear his browser cache, and immediately after that the same player start working fine. And loading the course chapter properly. Need help to get rid of this kind of situation.
Thank you
Amitava D

IOS 6 is very slow. Why!!! Can u fix that apple?

I have downloaded iOS 6 on the day it release and I have trouble with opening gmail on my iPhone and iOS 6 is very slow. I don't know what wrong with that. Did anyone know about it.

Try some basic troubleshooting steps. Clear Safari, force close the app and reset the iPad.
Go to Settings>Safari>Clear History, Cookies and Data.
In order to close apps in iOS 8, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
There re are ways to contact Apple directly. Look here for help.
Contact Apple for support and service

Photoshop loading photo files very slow (not printer)

For the past several weeks Photoshop C3 has been loading even the smallest of photo files very, very slowly -- about 10-15 seconds for one.
I read an earlier post to this affect, that said it might be a networked printer, but the printer on this computer is NOT networked.
I'm running Windows XP, latest update, with 3 gig of RAM. And we have deleted and reloaded the Photoshop program and updated it to make sure it's not a file goober in the program.
Anyone else experiencing this trend and/or have any solutions.
rfrank
WSU Today
http://www.wsutoday.wsu.edu

John:
Thanks for the effort, but alas it didnt make any difference.
Our IT support crew tried a variety of generic drivers in the default mode, but a 56k photo still took 15 seconds to load.
However, I still had a version of "Photoshop CS" on my machine. So, out of curiosity I fired up CS and grabbed the same test photos, and bam the photo popped right up. So it is definitely a CS3 issue
Any other solutions that you know of?
rfrank
WSU Today

I work with photoshop CS5 and the stamp is very slow. Why?

I work with photoshop CS5 and the stamp is verry slow. Why?

If you can afford it, go with a Crucial M4 SSD.
If your in a limited budget, go with a Seagate Momentus XT 750GB.
The SSD will be the fastest one and the Seagate being faster than a conventional drive.
If you decide to go conventional, avoid the Western Digital Scorpio Blue. They tend to have issues with Macbooks.
Good luck

Photostat Model HPPhotosmart Plus Prints very slow. WHY?

HP Photosmart plus Model B210 prints very slow. Is this normal. What is pages per minute for this machine??>?

Hi,
Do you use wireless print ? If yes, when you are sending something to print how BUSY is the wireless router ? (Are you streaming videos, downloading something ...). Please bear in mind, the router can slow the printing jobs, not the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Ereasing Master Files - Very Slow Process, why?

Similar Messages

Maybe you are looking for