EREC: Activities are already marked as planned for new candidates

Hello All,
when I log on as recruiter and open assignments to a requisition, select a new candidate (that is totally new in the system) and go to "Activities" two activities are already two activities marked as planned for this candidate.
The activities are "Check Suitability" and "Check Documents for Completeness" only in process step "Inbox".
Process step "Pre-selection" also contains one of these activities, but here it's not marked.
Any idea what could be the reason for this and how I can change these settings?
E-Rec is on EhP5 and NWBC HTML is used as frontend.
Thanks for your help.

Hello Carla,
These activities are created automatically once a candidate applies. This is done by the workflow WS51900010. So if you don't want them to be created you can copy the workflow to a custom one and delete these steps.
Regards
Nicole

Similar Messages

Changed MIC in quality plan for new lot.....

Hi All,
I created quality plan for one material and did result recording.
Now again new lot is created for same material but this time I donu2019t want to check same MIC what I did last time.
I deleted the pervious MIC and added new MIC what I want to check. After doing that again I went to QA32 to do RR for new MIC but its showing pervious one.
So what I have to do.
Please suggest me.
Regards,
Siddharth shanker

Dear Siddharth,
I created quality plan for one material and did result recording.
No issue this is fine.
Now again new lot is created for same material but this time I donu2019t want to check same MIC what I did last time.
If you don't want to check same MIC's there are two options :
a) Go to insp plan delete / overwrite the MIC and save, please ensure that your lot is generated after this change is made. new plan will be applied.
b) Make a separate task list with other set of MIC's and while assigning the task list to inspection lot you can select the desired one.
I deleted the pervious MIC and added new MIC what I want to check. After doing that again I went to QA32 to do RR for new MIC but its showing pervious one.
Pl check when the lot has been generated, if it is generated before you have done the changes then lot will not show new MIC's. for that you have to go to QAC3 to reset the insp lot.
Best Regards,
Shekhar

HEY APPLE! What are upgrade policy plans for new systems shipping with 10.4

I just ordered a brand new Xserver, thinking that there would be some policy in place for brand new computers shipping with 10.4, to get the new version of OSX Leopard Server (without having to buy a retail copy) - however to my surprise, there is nothing currently in place.
Will there be an upgrade policy soon for users who have just ordered new computers, currently shipping with 10.4??? Or should we return recently ordered items, and stop ordering new systems until they start shipping with 10.5?

Assumptions such as this one are often a recipe for disappointment and/or for extra expenses; I've certainly learned to be cautious with these.
In this case, there is a policy that has been in place (AFAIK) since the Leopard announcement.
For details on and requirements of the Leopard upgrade policy, do read the [Mac OS X Up To Date|http://www.apple.com/macosx/uptodate> web site.
Those folks outside the Leopard upgrade window that are upgrading to Leopard (and that don't have a separately-purchased Right-to-Upgrade) will be purchasing and ordering the upgrade. You may end up purchasing an iLife upgrade, too — if you're using it, and not already at the current release — as Mac OS X and Mac OS X Server upgrades apparently do not include an iLife upgrade.

What are the different subscriptions plans for cal...

HI,
I would like to know the different plans to call India (landline or mobile) from my Skype account.
When I select Prices-> put 'India' and click search, nothing gets listed.
Please suggest.
Thanks,
-DA

Call Verizon and ask. Or visit their web site. https://www.verizonwireless.com/b2c/index.html

Are there any special plans for Non-profits?

Part of a very small not profit that currently uses Photoshop and Premeire - would love to upgrade but, have to watch the expense. Thank you.

Not that I know about...
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html

Why are there two AppleCare plans for a MBP "13? the $239 and the $249?

I just wanted to make sure about my hunch, I believe the $239 priced APP is for the "13 MBP while the $249 priced is for "15 MBPs?
I have a "13 MBP, and if these two types of APP cover the "13 MBP, it is obvious I would go for the cheaper one.

Panoy wrote:
I have a non-Retina "13 MBP, so I go with the $249 APP right?
Yes.
Panoy wrote:
Also, is the $349 APP covers all Retina MBPs regardless of size?
Yes.

My plan for new FCS install with questions

End-of-fiscal-year budgetary windfall enables a giant leap from a G4 running FCP 4.5 to a spankin' new 8-Core machine for FCS2. (Hello Motion!).
I'd like to identify any "gotchas" in a new FCS install before I jump into it. Your advice and comments from personal experience are appreciated.
Here's my plan, based on what I've read here, and a couple of questions:
1. Update to latest available OS from whatever version is on the machine.
2. Run installer from disks - repair permissions.
3. Update FCS and Quicktime, if any updates are available - repair permissions.
4. Connect to old machine via Firewire target mode - transfer project files, plug ins, and any universal applications that might be useful.
5. Copy media from my old, external scratch drive to the internal eSata drive I plan to use as the new scratch - seems like a good time to repair permissions once more.
6. Launch FCP, set up preferences and drives, open an old project and reconnect media.
I'm starting with existing DV media and timelines, but part of our studio upgrade includes new Sony EX-1 cameras, so we'll soon be working with XDCam files. I haven't decided which quality level yet.
Do the new mixed-format timelines work as advertised? Lots of legacy material to deal with.
Is there any advantage in capturing XDCam and DV footage to separate drives?
I'd like to repurpose my old external drive for automatic back-ups. Is the Time machine working well for everybody?
That's enough to wrap my brain around right now. Thanks in advance from a long-time lurker. Always great discussions here.
Rob A.

Rob,
Congratulations on the new toy! You gotta love those year end surpluses.
FWIW, I think that you are on the right track. I would second the other response that said to only migrate project files. Everything else needs to be installed, especially since you are going from PowerPC to Intel.
internal eSata drive
This just made me laugh, it's kind of like having a "Hot" water heater. Anyway, the "e" in "eSATA" stands for "external" so having an internal external drive would just be strange.
Do the new mixed-format timelines work as advertised?
This is one of the most misunderstood features about FCS2. You have always been able to mix media on a timeline, and then render. The trick was that you had to choose what kind of timeline you were going to mix your media in. You remember on the old version you would open up a new project, bring in your media only to realize that you forgot to change the easy setup to the new media type. So now you have to delete "Sequence 1", change the easy setup, open a new sequence and everything was good. In the new version you open up a project, get your media, drop it on the timeline and FCP says, "hey, that media is different from your sequence settings, would you like me to change them for you?" Then you can go ahead an d mix media, and render.
Moral of this story, choose your sequence settings according to what the majority of your media in the sequence will be because you will have to render anything that doesn't match.
Is there any advantage in capturing XDCam and DV footage to separate drives?
No.
Hope this helps,
K

Plans for new database back end?

Are there any plans to allow the Calendar Server to use a different database other than the Berkeley DB?
Jason Whitener

Core Data is based on sqlite.

Help with plan for new system

I was hoping to get a little expert advice on the system that I am planning on building. I was looking at picking up the "MSI Z68A-GD80 (B3)" motherboard, along with an Intel 510 SSD 120 gb drive. I am planning on partitioning the SSD into two drives, one for the max 64 gb ISRT cache, and the other with the rest of the space for the win7 prof 64 bit OS drive.
So my question is if the splitting of the SSD is possible like I mentioned?
and next, what should I pick for a data/app drive? I am not sure whether to go with my usual 2 drive raid-0 setup, or simply get one drive since I will be using ISRT. Any suggestions?
Another note, after I read about booting from USB devices, I plan on skipping the floppy drive
Thank you for any input.

Booting of USB device can be set as a priority in BIOS.
SSD is like any HDD, just do the partitioning during setup.
RAID wise, it is up to your preference. Speed or Mirroring or Balance?

Why are pages and articles kept for new tab when privacy settings are on?

History and Tracking is set to not save, and clear upon shut-down. However, when I restart if I open a new tab, previous pages (ie. MSN and any articles I read) show up on New Tab page as options. I like to keep browser history so that when I return to a page my "place" is kept. This doesn't happen in private browsing mode

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Apple Care Protection Plan for new laptop?

I just purchased a MacBook Pro 13", I was just wondering how long I have to purchase an Apple Care Protection Plan?

Up to one year from date of purchase - however, if you don't buy it withing 90-days of purchase, you'll only get the 90-day phone support. I usually buy AppleCare when I buy a new computer - 3 year warranty, 3 year phone support.
Clinton

Every time I open a new Safari page, it loads the one(s) that are already open, instead of taking me to a new start page.

Every time I open a new Safari page on my MacBook Pro, it load the one(s) that are already open, instead of a new page. it's 8.0.2. I already went to Preferences and it says new page will open to Favorites....but it doesn't.

Hello beany1818,
Also check in Safari Preferences and look in the Safari Opens with and make sure that it is set to “with a new window” and not “all the windows from your last session”. Take a look at the article for more information.
Safari 8 (Yosemite): General pane of Safari preferences
http://support.apple.com/kb/PH19247
Regards,
-Norm G.

Interaction enabled on dimensional columns though not marked as Use for display

Hi,
I am facing issue with few of the dimensional columns in OBI 11g. Drill down property is enabled for few columns which are not marked as Use for Display or added to any hierarchy level.
Clicking on these columns is drilling down to the next lower lever. we can avoid this by setting a system wide defaults but not allowed to do that.
Any other suggestions to overcome the issue?
Thanks,
Vj

Any dimensional attribute column residing on a higher level of aggregation will automatically render the drill-down to its next lower-level child.
"Use for display" defines the attribute(s) displayed by default after a drill and is used to populate the property of the (default) displayed presentation column in a presentation hierarchy.
So you are experiencing standard, desired behaviour. Removing that interaction will necessitate setting system-wide defaults.
Cheers

How to map revision level materials to already created inspection plan?

Dear All,
I have created single inspection plan for many existing raw materials. Now it has been found that each raw material have different revision level as well as valid from date.
My inspection plan is created on 02.07.2014 and each raw material has different revision level with valid from date which is also very old (like 11.03.2012 for revision level 09).
My Requirement is: how to correct my inspection plan?, so that it will work for each assigned raw material and there will not be any material revision level wise problem created for the inspection lot so that my inspection lot should be created in REL status in QA32 transaction i.e. inspection lot is assigned automatically as per standard SAP functionality.
Thanks,
Narresh

Hi Amol,
Thanks for your reply.
In this business scenario, we are not creating inspection plan for each raw material because there is similarity in inspection for 40-50 raw materials and total number of raw materials are around 500. This will be very difficult and unnecessarily data creation in the system.
As per my understanding revision level is for material master revision and if material master changes then how it affect so much on inspection plan? also is it means that for every revision in future we will have to create new inspection plan? hence I believe that if I will make back dated inspection plan for raw materials then it may work. Is my understanding is correct?
Expecting much better solution from QM experts.
Thanks,
Narresh

Payment Plan for Upgrade Phones

I think Verizon should have a payment plan for new upgrade phones. I have been a long time Verizon customer and in years past when my plan would come up for a replacement phone I always choose one of the top phones and upgraded for about $50. In today's time, due to Technology, to upgrade to say an I Phone runs around $300 by the time you get tax (CA), new charger- home and car as well as a hands free device. To pay that Big amount the next month on my bill is the reason I am holding back getting one and I want the best because new phones are always coming out and we will have a better ones and the focus is everything going mobile. If I could split that total into 2 payments, it would be a lot easier for me and I would be at the store tomorrow buying one. I think Verizon should do this because they would increase their phones sales immediately. No Other Phone Company is doing this and they could pick up new customers from companies that do not offer this. First to the Marketplace to do this has BIG Value.
In this Economy, Verizon could create a way to increase their sales and a sense of Goodwill to help the consumer at the same time...Novel Idea!!!!!!

Pay for the phones and service up front or use a credit card (as SydneyK suggested) ...Verizon isn't going to finance the phone purchase. They are in the business of providing wireless service, not financing equipment purchases.
I can imagine prices would go up if they ever WERE to do this, since I'm sure there would be defaults that the rest of us would cover with increased rates. No, thanks...

EREC: Activities are already marked as planned for new candidates

Similar Messages

Maybe you are looking for