EREC BSP Problem

Hi pple,
We are seting up EREC system on ECC 5.0,EP 6.0 and EREC 3.0.
We did the needed Technical Settings for the EREC system.
When we tried TESTING the BSP Application - <i>HRRCF_START_EXT</i>, it's asking for EREC User id and password. When we typed in the id and password, we are getting an error -
"<b>Name of logical port '&lp_name&' is invalid</b>"
The validation of user id and password is getting done properly, but only thing is, after validation, we are getting this error.
In fact we tried out same thing with another BSP Application - <i>HRRCF_CAND_REG</i>, And when we enter all these details, the USER ID is getting created properly in BACKEND System, but getting the same error in the next screen of that application.
Can anyone help us in these regards.
Regards,
<i><b>Raja Sekhar</b></i>

Hi pple,
I solved the problem with the help of SAP Support.
Well, the problem is due to 2 reasons.
1) We got to test the EREC BSP Application by creating the URL using the RCF_GENERATE_URL report and use this URL to test the EREC Application.I created my IView and copied the application parameters(which I got from my generated URL) in my IView definition.
2) The error "Name of logical port '&lp_name&' is invalid", comes due to lack of OTR Definition. We got to define OTR's for every application,Group,Page so that we can see the correct description.
All these works only after setting the SYSTEM PARAMETER in EREC Technical Settings.
And there is no problem with LOGICAL PORTS at all.
I hope this solution will be useful for many pple like me.
Regards,
<i><b>Raja Sekhar</b></i>

Similar Messages

BSP Problem in EP

Hi All,
I am facing the BSP problem in the EP my problem is ...
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
BSP Exception: Das Objekt application.do/start in der URL /sap/bc/bsp/sap/hrrcf_start_int/application.do/start?sap-syscmd=nocookie&sap-client=001&sap-language=en&style_sheet=http%3A%2F%2Fepsand1.prosofthq.com%3A50000%2Firj%2Fportalapps%2Fcom.sap.portal.design.portaldesigndata%2Fthemes%2Fportal%2Fsap_tradeshow%2F ist nicht gültig.
Error type:
Your SAP Business Server Pages Team
every thing is fine SICf Service is also active.
when I go to SE 80 to check the URL , I found this URL no 8000 but my port 8010 as below , if i would like to change it how can i change it or please give the alternate solution.
http://xxxxxxx.xxxxxxxq.com:8000/sap/bc/bsp/sap/hrrcf_start_int/application.do
regards,
Iqbal

Hi Iqbal,
I am sure if this Iview is supplied out of the Box from SAP or not. You need to double check with your functional guy who deals with HR (MSS/ESS). To create BSP Iviews read the link below.
http://help.sap.com/saphelp_nw04/helpdata/en/30/1b62799d786445a72ad85acb4fd55b/content.htm
Read point <b>3.7</b> of this DOC. This is step by step guide to create BSP Iviews.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a303e745-0d01-0010-b280-802bca844b8f
Hope this helps.
Cheers
Amandeep.
<i><b>Reward points for each helpful answer.</b></i>

EREC-BSP-How to call a bsp application from another bsp application

Hi Experts,
In E-Rec one of my bsp application zapp_e_ext calling another standard bsp application hrrcf_searchhlp when user click on search help button.
i made a zcopy (zhrrcf_serchhlp) of std application hrrcf_searchhlp,and did some changes,
now the problem is how to replace the std application with zapplication so that zapplication should be called in place of std application when user click on search button.
Cheers,
Amod

try exec()ing the cad program with the name of the file as a command line parameter...
Runtime.getRuntime().exec("CADProg.exe Test.prt");
i have no clue if this will work but it seems like it's worth a try.

BSP: Problem in F4 help

Hi All,
While displaying a custom field as an input field with F4 Help. i used the statement:
onValueHelp = ="ICWCShowF4HelpExtern(... )"
by passing the relevant values(structure-attribute name etc..) and i am able to see the F4 help as a pop up..
But the problem here is when i select an entry from the F4 list. it is not flowing into the input field!.
Any help/hint really appreciated..
Thank You,
sudeep v d.

Just go through the blogs of Thomas for input help in BSP. Hope this will help you.
Link : <a href="/people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30">BSP Input help</a>
Regards,
Animesh

BSP problem in web browser

The tutorial BSP applications are not working in my system at the moment. I have activated all the ICF services and thought that I had set the hostname correctly using the computer's IP address. The message I am receiving in Internet Explorer is:
Following error text processed in system:
BSP Exception: Die URL enthält keine vollständige Domainangabe (192.168.0.100 statt 192.168.0.100.168.0.100).
The address that the page is pointing to is:
http://192.168.0.100:8080/sap/bc/bsp/sap/tutorial_1/default.htm?sap-client=000&sap-sessioncmd=open
Has anyone had this problem in the past?
Thanks in advance for any help.
Cheers,
JB

From note 616900, the number you should have written on your monitor, we see:
Specifically for fully qualified domain names problems, see:
434918 Configuration for fully qualified host names for BSP
654326 Domain restrictions in a portal environment
654982 URL requirements due to Internet standards
677118 SP31-->: Fully Qualified Domain Names Check
763427 Error message for domain name with underscore
814832 Hostnames and Cookies

Integration of Job Portal IN Erec (BSP)

Dear all,
I have a requirement to *integrate JOB portal ( monster) as a posting channel in EREC by using BSP *
My Client dosn't have any SAP -XI team,
kindly provide helpful documents and ideas.
Thanks in Advance,
Regards,
Kranthi kumar Palle.

Hi,
Please check the threads.
E-Recruitment : Integration of E-Recruitment with external job portal...
E-Recruiting Job Board Integration Using XI
Thanks & Regards,
Sandip Biswas.

MSS BSP problem

Hi all,
I have a MSS problem. When push a link in the BSP application it calls the bakecnd system with hostname:8000. this results in the error:
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (hostname statt hostname.).
In portal I have written the system object with the exsension company.com on the WAS, Connector and ITS. So where does the url come from? ERP?
I need to change the call to be with a fully qualified domain.
Message was edited by:
Ingvild Nygaard

Hi all,
I have checked the BSP aplication and also the tried deactivating/activating the service in SICF transaction. But im getting the same error.
This BSP iView is in MSS performance management. The BSP page is triggered on the click of a link from a WD java application. These links are dynamically generated from the Backend system. My doubt is the application parameters for generating the BSP page must be present in the backend system and passed on. Is there a way to find out the URL for generating the BSP page in MSS???
Thank you,
Viji

Strange BSP problem

Hello,
I have a BSP application with a strange probelm, which occurs only when NO breakpoint was set in my code.
So I can not analyse the problem with Debug, because it runs perfectly with the breakpoint.
Does anybody have the same expierence.
Thanks
Yang Yang

Hi Yang,
Please see the following Wiki link. It has little explanation about "Application only Works in Debugger".
[Debugging Problems|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bsp/debugging+problems]
Hope this may help you for this issue.
~Salil

Upgrade 620 to 640: BSP problems

Ok, I know there are a few of you in here who have done this so speak up
I just upgraded our 620 SP47 server to 640 SP11 and I've started going through checking out all our apps. I'm on the last app now and it's of course the biggest.
I'm getting nothing but strange problems about "How I can't use that variable as 'Protected' in my controller class" or I am getting syntax errors CL_O2ELI489813B0ROMNXZ1RWW5ON5C
in the Include "CL_O2ELI489813B0ROMNXZ1RWW5ON5CO " in line 5:
"Implementation missing for method "%_ONLAYOUT". "%_ONLAYOUT"."
So has anyone come across this or do I need to open an OSS message?

Hallo Craig,
We have had these mysterious problems a few times. Unfortunately not long enough to understand why. Two options:
(A) Open OSS message so that we can mess around for 5 days in your system. Maybe we understand it then. Will require some workbench expertise.
(B) Just reactivate all BSP pages (what we will do in anycase in the end:). Control-F3 on each page should make the problem go away. (From what I remember you can select them all in the tree on the left and do it that way.)
bye, brian

Calling web-dynpro-transaction in BSP problem

hi,
in my BSP html-coding i have the following:
o nclick="window.open('xxxxx.xxxxxxl:8011/sap/bc/gui/sap/its/webgui~transaction=Z_LSO_WF_UEB{code
when i push the button in the portal i get to the transaction Z_LSO..... in sap. this is fine, BUT:
sometimes the new window opens and in the middle of the screen the 'round icon' (which is displayed when a page is loaded) is displayed and nothing more happens.
then i have to push F5 (refresh) in internet explorer and then the start-selection-screen of my transaction appears correctly.
in other tries it works fine, then i get to the selection-screen after pushing the button without pushing F5.
any ideas bout that behaviour ?
best regards, Martin
Edited by: Martin Svik on Apr 30, 2008 1:50 PM
Edited by: Martin Svik on Apr 30, 2008 1:53 PM
Edited by: Martin Svik on Apr 30, 2008 1:53 PM

Thanks Raja,
I am in 4.7 E
This is my code for VF03 ,
this is layout code of page
<%@page language="abap"%>
<<html>
<body bgcolor = "silver">
<form>
<input style="Z-INDEX:   BACKGROUND-COLOR: #FFFFFF;
BORDER-BOTTOM: black 1px groove; BORDER-LEFT: black 1px groove;
BORDER-RIGHT: black 1px groove; BORDER-TOP: black 1px groove;
FONT-FAMILY: Verdana, arial; FONT-SIZE: 8pt; TEXT-DECORATION: none"
type="text" name="number" value = "" maxlength = 10>
<INPUT style="Z-INDEX: 103; BACKGROUND-COLOR: whitesmoke" type="submit"
name="onInputProcessing(select)" value="Display" action = "tcode.htm">
</form>
</body>
</html>
This is its event handler(OnInputProcessing)
event handler for checking and processing user input and
for defining navigation
case event_id.
when 'select'.
    navigation->set_parameter( 'number' ).
    navigation->next_page( 'tcode' ).
   set parameter id 'VF' field number.
endcase.
*****This is code for next page
Layout
<%@page language="abap"%>
<html>
<body BGCOLOR="#f5f5f5">
<h2> Your Customer search </h2>
<%
if number is initial.
%>
<h3> Sorry, we found no matches for <%= number %>. </h3>
<%
else.
%>
<%
endif.
%>
Event Handler(OnInitialization)
if number is not initial.
   SET PARAMETER ID 'VF' FIELD number.
   call transaction 'VF03'.
else.
number = '%'.
endif.
Plesae check it, I am waiting Or Give me sample code for any TCODE.
Thanks,
Dhananjay

EREC BSP link not working on dev portal

Hi,
I need to find the link to open the E-Rec BSP application through portal. I am new to the system and dont know how to find it. Can any one help?
I know the link for PROD system but not for DEV....any clues..suggestion...
Thanks & Regards,
Shruti

Hi I checked the transaction RZ11 for parameter icm_host_name_full parameter ....the values there are not set. I Then tried editing it in tcode RZ10..here its already set but it doesnt gets reflected in RZ11 tcode...kindly help

EREC: BSP compatibility with Firefox 10 (and above)

We recently hit a compatibility issue with Firefox 10 (launched last day of January) and eRecruitment EP03 BSP pages used for the Recruiter scenarios.
This is due to class CL_BSP_ELEMENT_RT_ATTR_VALID, method BROWSER_CHECK which checks the browser versions.
It now thinks the version number is lower than the minimum supported so throws a nasty "Your browser isn't supported" error page.
A quick workaround is to apply an implcit enhancement to the start of the method. Simply "EXIT" to skip checking the versions.
SAP recently removed browser version checking from WebDynpro, but don't appear to have got around to removing it for BSP yet.
George

Hi Roman,
Yes. I understand its not easy for SAP to keep pace with the rapid release changes.
When they do support Firefox rapid release, I'd be surprised if they back port the changes to NW 7.00.
There's still no sign of Safari working in 7.00 despite fixes being back ported to NW 7.01
It appears the version number isn't coming through correctly as it thinks version 10 is less than the
minimum supported version. If anyone actually has a very old version of Firefox that's less than the
minimum version it won't work properly for them, but we can simply ask them to upgrade. For me that's
less of a pain than blocking the newer versions and waiting for a support pack/SAP Note to fix it.
The suggested workaround is a one line ABAP implicit enhancement to the start of the method that
performs the checks to disable it. With this in place we're back up and running in production with Firefox 10/11.
George

PMS BSP problem

Hi Experts,
We have upgraded our system from ECC 5 to ECC 6 but now the form layout got changed in ECC 6 in portal view , It uses a BSP application HAP_DOCUMENT , everything is same defined as in ECC 6 .

Hi,
Check the system definition in portal.
a. Edit the system being used by your BSP iView
b. Check the value for WAS settings,host, port and path
c. Ensure that the port is correct
d. Save the changes to the system
Check your BSP application. It should be fine.
Thanks and Regards,
Prasanna Krishnamurthy

BSP can not show when host isn't in a domain

Hi guys,
I tries to configure alert in XI Runtime Workbench but failed, then I followed one how to guide in SDN : How to monitor exchange infrastructure.
then I test, and try and test.
finally I found out it is a BSP problem. I have tested a simple BSP application "webservicebrowser" in se80. but it show error.
could you help me?

Hi,
follow sap notes: 750287
regards
ravi.

ERECRUITMENT 6.0 - Mass activation of BSP's in QA

We have successfully completed unit testing EREC functionalities and are in the process of transporting configuration to QA.
Our Technical team activated all the standard EREC BSP's when we did the install, it did create a transport request. Works fine.
Issue: Technical team is concerned that if all the BSP's are migrated to QA, then, there would be potential issues.
I do not think it is a valid concern. Any one has pointers?
BTW: In SE80, I see that there are around 80 EREC and around 15 SP BSP's and there is no option to individually go into each of these BSP's and test it out..
Question: Is there any issue in transporting the change request containing all the BSP's with the user assignment to QA??
Thoughts appreciated.

Sunil,
How r u, long time no talk...
Couple of things :
The activation of BSPs will not be included in transport request. Only any changes to BSP for example assigning service users in log on data will be included in transport request.
I dont see any issue transporting those BSP changes, also I hope there are no core modifications done to std delivered BSPs'.
Lastly, testing URLs is easy way to test the eRecruit services/applications.
regards
Sridhar

EREC BSP Problem

Similar Messages

Maybe you are looking for