EREC - E-recruitment implementation (pre-requisites)

Hi,
I hav just started with a project related to E-Rec EHP4 implementation.May i request E-Rec experts on community to share some pre-requisites for me to start with.
Scenario : E-Rec is being implemented as a separate system with integration to HR system. (data from HR to E-rec will flow through ALE)
1. What all switches and extensions in need to activate in SFW5?
2. What all things are required to be configured in IMG ?
3. What all things I need to configure through Portal ? Which roles should i get on the portal?
4. What all activities are to be done by following people in ERec Implementation
> E-Rec Functional Consultant
> Portal Consultants & Webdynpro
> ABAP-HR Consultants (BAdI's,etc)
> Basis (TREX and what else?)
I would appreciate any quick respone over the same.
Thanks in anticipation.
AJ.

Hi Abhay,
Please check out this link
e-recruitment

Similar Messages

SCOM 2012 R2 - Implementation Pre-requisites.

Hi All,
I would like to know if we need to keep in mind any pre-requisites when we implement SCOM 2012 R2. So my question is specific is , if I would install SCOM DB in a VLAN A and operations manager in VLAN B than are there any specific pre-requisites that
I need to keep in mind?
Rgs,

No. You need to verify firewall ports and communication between Vlans
http://expertslab.wordpress.com/2014/04/09/scom-2012-firewall-ports/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SNOTE wants to implement pre-requisites that do not match our system

Hello everyone,
I am trying to implement a few notes on our Sandbox system where SAP_APPL = 602.
Some of the notes I want to apply using SNOTE want to apply pre-requisites that I would expect to have no relevance as they are for earlier versions of SAP_APPL.
For example:
Note 1506402 wants to apply 801388
Note 1551976 wants to apply 814277, 914560, 930716
Is this a harmless bug in SNOTE or will it actually change something? I looked at the corrected object list in SNOTE for 801388 and there was an entry, even though the change in the correction was already in the code.
Any advice will be greatly appreciated!
Thanks,
Stuart.

Hi Sturt,
Same thinks happened to me also . It download the pre-requisite notes. But which notes are not applicable, SNOTE will not change any code. From SNOTE there another functionality to undo the implementation. So if any think goes wrong, you have the alternative solution.
Thanks
Subhankar

Pre-Requisites for Implementing E Recruiting on ECC6.0

Hi All,
Can anyone please tell me what are the pre-requisites that are to be met to implement E-Recruitment on ECC6.0 (No EHP).
And where can i find out the differences of Erecruitment on ECC6.0 and EHP6 (Functionalities that will be missed if we go without EHP6).
Also is EP necessary to implement E recruitment. We even do not have ESS / MSS
Our System is a Plane ECC (No EHP).
Regards
Syed

Hello Ameen,
Well ECC6.0 is R/3 Server and EHP6 is Portal server .
E-recruitment works good with portal. It provides so may functionalities there .
If u don't have EHP or don't want to use it .
In that case u can Create Customized module pool Application , but obviously u will not get feel and look and some other functionalities available over portal .
You can create Role Matrix table, where u can save roles of Recruiter, manager and id password etc etc .
Plus SAP has also provided traditional Recruitment in R/3 system, you can also use that . You can find that in SPRO .
From EHP4 Sap moved on to Webdynpro abap which was BSP till EHP3 , SO you can also use Webdynpro applications directly without portal . But there you need to customize more . OR you can have Customised Webdynpro application for Recruitment also .
Regards,
Pran

What are the pre requisites for E-Recruitment module?

Hi all,
What are the pre requisites for implementing E-Recruitment module ?
Does it require Hr module or as stand alone it can work?
Regards.
Rajendra

Thanks Aniket
Will the following configuration work as e-recruitment stand alone mode.
WAS with ABAP stack + E-Recruting 6.0 sp + Java stack + Portal + ESS MSS Business package ( for e recruiting).
Regards
Rajendra

What are the pre requisites for implementing ChaRM

Hi
We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
Thanks & Regards
Anand

The listed pre-requisites for the implementation of ChaRM are;
1. Already completed the basic configuraiton of SAP Solution Manager
2. You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
3. you have setup business partners for the users (or at least 1)
4. satellite systems are at the minimum support package level required (note 907768)
5. connections are available to the satelite systems
6. CTS+ if you wish to control non ABAP change requests through ChaRM

Pre Requisites for Implementing the CUE

Hi,
I have an IP Telephony set up with CME in 2 different branches.We need to implemet the AA in sites.
What are the pre requisites for hardware and license based that need to check before implementing the CUE.
one site having cisco 2911 router with Version 15.2(2)T3 and with interface ISM module is present which would like to configure for the AA.
second site having 2901 with Version 15.0(1r)M16 and with interface Embedded-Service-Engine0/0.
Attached is the Show tech support for each CME's .
Thanks in advance
Nithin Louis.

Hello
if there is no module installed you can completely ignore Embedded-Services-Engine as it won't be doing anything. Embedded Service Engine
Overview:-
Cisco Integrated Services Routers Generation 2 (Cisco ISRs G2) have dual core CPUs on the motherboard. The first core runs Cisco IOS software as Cisco Integrated Services Routers (ISRs) do; the second core, or the Embedded Service Engine, is capable of running Linux-based applications.
The following Cisco ISR G2 platforms support the Embedded Service Engine:
•Cisco 2911
•Cisco 2921
•Cisco 2951
•Cisco 3925
•Cisco 3945
Note:- As above 2901 not support embedded service engine . May be you got it on the CLI , because you run the same S/W version.Reference
https://supportforums.cisco.com/discussion/11184226/interface-embedded-service-engine00
*That is why i did not mention for Embededd service engine module supportedwith Cisco 2901, so kindly check. The above post Cisco document for compatibality.If you need to try , so try with minumum memory 1G as 2911
Memory required for 2911,2921 is 1G , 2951 is 1.5 G , 39XX is 2.5 G.My advise to you to go through ISM-SRE-300-K9 , and shut Embedded service engine .
Thanks
please rate all useful information

Pre-requisites for implementing WMS for an Existing Organization.

Dear Folks,
My client is planning to implement WMS for an Existing Organization.And this organization(warehouse) performs all the daily transactions.
Are there any pre-requisites to be done before implementing WMS on this organization?
Any help is highly appreciated.
Regards,
Sri

>
venkatesan janardhanam wrote:
> Hi Experts
>
> We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
>
> I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
>
> Thanks in advance
>
> Thanks & Regards
Hello Venkatesan,
There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
Regards
Amit

Pre-requisites to implement PLANNING through SAP BPC

Hi,
Would like to know the pre-requisites to implement PLANNING through SAP BPC 7.5.
Please help.
Regards,
Deepankar Jain

Hi Raghu,
I have the below scenario:-
The thing is that R/3 team is implementing FICO right now and BPC for Planning only needs to be implemented parallely.
Client would have the Actual figures but not in SAP. so is it possible to go for it in this scenario.
Regards,
Deepankar Jain

Pre requisites for implementing ChaRM & CTS+

Hi Experts
We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
Thanks in advance
Thanks & Regards

>
venkatesan janardhanam wrote:
> Hi Experts
>
> We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
>
> I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
>
> Thanks in advance
>
> Thanks & Regards
Hello Venkatesan,
There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
Regards
Amit

Oracle Universal Installer not starting, failing on pre-requisites

--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
Thanks

Thanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though?

Pre-requisite of Electronic BRS

Hi,
My client's requirement is to use electronic bank statement. For this I need to configure the steps as mentioned in SPRO for electronic bank statement.
I went through the posts in SDN forum. But i want to know the pre-requisites (like interface required for Electronic BRS, Multicash format from banks, etc) required for Electronic BRS.
My client does not have any interface or Mullticash format. It just downloads statement from internet and does manual BRS.
Please let me know if EBRS possible in such scenario
Edited by: Meenu_ND on May 5, 2011 9:58 AM

Meenu-
Implementing Electronic Bank Statement is going to be quite a task:
1. First thing would be to ask your bank in which format they can provide you the statement. Lets say they provide you in BAI Format.
2. Then you would have to get a list of BAI Codes that will be used by your bank in their statements.
3. Get a list of bank accounts that you would be uploading electronically in SAP
4. Based on your company GL Account structure, create all the clearing accounts that are needed (cash receipt, cash disbursement, check receipt, check disbursement, clearing accounts etc).
5. Configure EBS in the system which includes creating BAI Codes, mapping accounts to bai codes, assigning your bank account numbers to company codes to BAI Structure.
Again, it all depends on what format you will be using. In US, we use BAI format and it is pretty straightforward task.
Hope this helps.
Shail

Pre requisites for installing SAP Router

Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
Aayush

Installing the sapcrypto library and starting the SAProuter
Contents
u2022     Downloading necessary software components from SAP Service Marketplace
u2022     Creating the certificate request
u2022     Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
     a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
     b.     For more information on how to obtain authorization if download is not possible see note 397175.
     c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5.     Copy the file to the direcory where the saprouter executable is located
6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1.     As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3.     Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4.     Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7.     With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9.     This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1.     Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX     printenv
Windows NT     System environment variable
3.     start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar

Pre requisites for Structural Authorizations

Guys,
Can some one tell me what are the Pre requisites that I need to follow before implementing Structural Authorizations? Please share your thoughts.
Thanks,
Kumar

Thanks Sikindar,
This document is for BW 3.x and we are implementing Struct Auth in BI 7.0, infact I have the same document as well. I am trying to see whether anything has changed in configuration point of view from BW 3.x to BI 7 for Structural Authorizations.
Thanks,
Kumar

Pre-requisite for BCS implementaion

Hi,
Please guide on pre-requisite for BCS implementation. What are the settings done in ECC for BCS. Also, how can items be directly uploaded without BI help in BCS.
Thanks

Hi,
Take a look at the image below.It is telling all steps need to be done in both ECC and BW side.
http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/33/A703F210254B8884F9E1E39DB83A15/Group_Cl_image002.gif
http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/33/A703F210254B8884F9E1E39DB83A15/content.htm
You may also check service.sap.com/sem for details.
Regards.

EREC - E-recruitment implementation (pre-requisites)

Similar Messages

Maybe you are looking for