EREC: HRRCF_A_UNREG_JOB_SEARCH Search

Hi,
The search function from this service is not working, no results are displayed almost like its not indexed. But, when i login as candidate and click ont he employment oppurtunities tab...search is working. Standard table entries missing?, we didn't customize anything its standard out of the box..we are on EhP4 and ECC 6.0
thanks in advnace for your help.
Added EREC

Hi,
18 is fine - also that the BSP columns are empty. Only the last two columns have to be maintained with the Business Object - so EXT_POST and NC.
UNREGISTERED2POSTING             18 Search for Employment Opportunities (WD)                                                                             EXT_POST   NC
Regards
Nicole

Similar Messages

  • EREC & TREX Search

    Hi,
    We're using SAP ECC 6.0 with SAP_ABA & BASIS SP21 (SAPKA70021), SAP_HR SP67 (SAPKE60067), ERECRUIT 600 SP17 (SAPK-60017INERECRUIT), TREX 7.0.
    ECC & EREC runs on the same instance.
    Configure the search using the Search Server Relation. Transactions SRMO, skpr07, skpr06.
    The problems is:
    Recruiter: Talent Relationship Management, We still don't have our candidates when searching@TRM
    External candidate: Search for Jobs, Search Result: 0 Hits
    Regards,

    Dear,
    You need to check, If you are able to search it from the TREX side, Use transaction SKPR07 and then check, If you are able to search the candidate from here, If you are not able to search it from here, It means TREX is not giving the results.
    Please check the following notes in this regard:
    817145    Composite SAP note/overview: TREX troubleshooting
    1300398  General Recommendations for Search Related issues in Erec.
    Hope the above details should be helpful.
    Best Regards,
    Deepak..

  • EREC: Qucik search functionality for locked profiles of candidates

    Hi Experts,
    Normally when a candidate register themselves in e-Recruiting application, they have two option to set their profile status i.e. 'Locked' and 'Released'.
    Locked - Applicant is inactive or not looking for change. So when recruiter do a search, they won't see 'Locked' profiles.
    But in our case, recruiters are able to see the Locked profiles. which is not correct.
    Could you please let me know how it can be restricted. So that recruiters will not be able to see the locked candidate profiles.
    Please suggest some hints.
    Thanks in advance.
    Regards,
    Anil

    Hello,
    This is how the standard e-recruiting quick search works. It does not take into account the attachments of objects nor the candidate profile status. It searches for the structured free text data only and also searches for candidates with both released profiles and candidates with locked profiles.
    If you want the recruiters to be able to search for released candidates then they have to use either the TRM search for candidates (Candidate Search service), the search for candidates in the context of a requisition (Search and Proposed Candidates link), and the search for candidates in the context of a talent group. These three searches take into account candidates with released profiles only.
    Regards,

  • EREC: job search

    Hi guys,
    I am new in e-recruiting. I have created requisition, released then posted and publicated.(step by step)
    My publication is for internal, Now I want find my publication via "Job Search". I can't find it. and I dont know this module well.
    Please help me
    Thanks and regards
    Samir

    Hello Samir,
    Job search is a relatively broad area where it's nearly impossible to give you a quick overview. That's the reason I mentioned the wiki pages as there you have potential errors/check reports mentioned you can use to investigate why the job search isn't working for you.
    There can be several issues on that: not indexed on TREX, fulltextsearch not working but attribute on does, wrong search application customizing, wrong SICF service customizing and so on.
    If you have done changes on the search customizing it is usally the best to start the check report I mentioned as there you see what search settings might be missing or are wrong. If all steps are shown with green lights then you can take the next steps.
    Regards
    Nicole

  • EREC : Job search for external agencies still displays expired job posting

    For external job agencies when they go to view publications. It still displays the job postings which have expired.
    For example it displays job postings whose end date is 15.06.2011, no extension has been done for this postings.
    It allows applications be created for these postings as well. Any idea on how this can be prevented.
    Thanks in advance

    Hello,
    You mean by the reference code search? Yes, there you see by default all codes.
    If you want to see only valid ones you have to activate the checkbox 'published'.
    Regards
    Nicole

  • EREC: search for branches

    hi
    I have logged via RECRUITER role. Now I want to create my requisition and want add for it branch.In seacrh criteria i have selected my Company. Clicked to "Start Search" but nothing. I use IDES now. how can I assign company to my other companies? I am new in EREC. anyone can help me?
    regards,
    Samir

    Hi Samir.
    I have the same problem. During my individual searching of solution i found two thing.
    First we can create branch via Administrator -> Maintain brances for selected Company.
    the second under IMG->SAP E-Recruiting->Basic Settings->Enterprise Structure->Define and Assign Branches to Companies
    First create the branches , Second assign them to the Company.
    Regards
    Garayev

  • EREC: "How to assign customize PDF forms in Candidate's job search"

    Dear All,
    I had a requirement to change the format of the form to display the posting. Hence i took the help of the table t77rcf_PRMC_PL , t77rcf_PRM_PL , t77rcf_MDL_PRMC to assign Values to Interface Parameters. Here i user the parameter: FORM_PUBL_EXT_DOVR and parameter value as the new Z form created. The new form was visible in the publication area of the job posting from recruiter portal.
    But when i try to view the form by searching the job posting (as a candidate), it is still displayed in the old format. i.e when i try to view the posting using the posting search functionality.
    Can anybody please tell me what is the configuration left from my side.
    Regards,
    Deepak

    Hi Deepak,
    The customizing of V77RCF_MDL_PRMC is wrong.
    Value "DISPLAY_PDF" is only allowed with values space or "X".
    Furthermore, the correct parameter for the job posting data overviews (publications) is SF_PUBL_EXT and SF_PUBL_INT (see documentation of this IMG step).
    Regards,
    Nicole

  • EREC: Duplicate selection options on job search screen

    Hello,
    I am getting duplicate selection options for unregistered job search. Functional Area, contract type, country are being displayed two times. I looke dup search templates, but didnt find any duplicate values.
    Help is much appreciated.

    Hi Nicole,
    thank you for pointing me in the right direction. I had more than one search template assigned in the search tempalte groups table. I removed that, which solved the problem.
    Thanks Again

  • EREC : Posting is not listed in Job search

    Hi experts,
    I have created requisition job posting and publication(For external) and released them. but when logon to the system as External user this Posting is not listed in Job search section. is there any solution for this ? must  i check something in posting table or something else ?
    Regards
    Garayev

    Hello Garayev,
    Please have a look at wiki page
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/Aparticularobjectisnotshownintheresulthitlist
    and check solution steps explained there.
    Regards
    Nicole

  • EREC: Filtering out locked candidate profiles in the quick search fn

    Hi,
    When a candidate registers in SAP e-Recruiting application, they have two option to set their profile status
    i.e. 'Locked' and 'Released'.
    Locked - Applicant is inactive or not looking for change. So when recruiter does a search, they won't see 'Locked' profiles.
    The requirement is that for the quicksearch option the the locked profiles need to be filtered out.
    I have tried implementing the BADI - HRRCF00_SEARCH_HIDDEN_INFO method RETRIEVE_HIDDEN_INFORMATION( )
    by populating et_hidden_info table for iv_search_task EQ 'quicksearch'. It gives a syntax error "The syntax of your entries in the full text search is incorrect ".
    Is there a way for the locked profiles to be filtered out inorder that recruiters don't see the locked candidate profiles?
    Thanks for your help!

    Hi Sally,
    Thanks for your reply.
    I have verfied if the correction mentioned in the sap note you've mentioned has been incorporated in the system, and I observe that it has been modified per the note.
    I have already added the TREX attributes as below:
        ls_hidden_info-ses_attr_name = me->gc_hidden_info_cand_status. ('hidden_info.candidate_status.key')
        ls_hidden_info-ses_attr_value = me->gc_cand_status_released. ('RELEASED')
    for the iv_search_task EQ 'quicksearch' and appended it to the exp. internal table et_hidden_info.
    After this am getting the error message 'The syntax of your entries in the full text search is incorrect'.
    Many Thanks,
    Wincy

  • Dispaly job close date in job search page in EREC

    Currently applicants can only see job published date when they search jobs, I am just trying to display job closed date which has entered by HR Recruiter.
    Any idea how do i display that field on that page so that applicant would know when the specific job closes?
    How do i also display job pulish date in mm/dd/yyyy format even if Recruiter enters date in mm/dd/yyyy format it displays in other format?
    Thanks

    Hi Experts,
    Please help me on this.
    Thanks,
    Rajeshkumar N

  • EREC: Search Criteria

    Hi Experts,
    Request help...
    This is regarding quick search button available on the recruiter dashboard. We give a search criteria ex:XYZ and click on search, all records answering the criteria are displayed. When we change search criteria to ABC and click on search. Records pertaining to the previous search criteria i.e XYZ are being displayed.
    Why record search details are not getting refreshed?
    Regards
    Savitha
    Edited by: SAPHCMRR on Aug 5, 2011 9:20 AM

    Hello Savita,
    To get an automatic refresh of the Recruiter Dashboard, you should have activated BAdI HRRCF_POWL_REFRESH and implemented note 1401400.
    The POWL queries should be updated only by navigating (so without the application events) eg. by setting parameter refreshOnQuerySwitch in a custom POWL_UI_COMP application configuration which is called in component ERC_POWL_WORKCENTER from the workcenter application configuration.
    Best Regards,
    Deepak

  • EREC:Search candidates in a requisition displaying blank results

    Hello,
    When i search for candidates within a requisition, its displaying blank results. the results window says Results (46) but i dont see any candidates. The search/Proposed Candidates button has 46 as count as well. In the same pop up window i changed the existing search query and clicked search, even that didn't display any candidates.
    SLG1 has no errors, why is the results number displaying inaccurate data? and then i see all blank rows.....any help is much appreciated.

    Hi Dhana,
    Please check the setting described in wiki topic:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/Nosearchresultsinaparticularservice
    Regards
    Nicole

  • " HRRCF_A_UNREG_JOB_SEARCH " service for unregistered candidates is not working

    Dear all,
    " HRRCF_A_UNREG_JOB_SEARCH " service is not opening the contents of search criteria instead its giving an error message  - " You do not have the required authorization to use this application " when trying to open the service directly from SICF in case of unregistered candidates.
    Previously it was working properly but suddenly its giving such an error.
    we have maintain " RCF_UNREGSER " service user for the particular service and maintained the necessary roles.
    Please guide how to resolve the same and as its very urgent for us.
    Regards,
    Deepak

    Hi Andy,
    There is an entry in table HRP5102 for the candidate 3978.
    In SICF, I have change the Procedure as "Required with logon data" instead of standard then also its not working giving the same error "You do not have the required authorization to use this application".
    After search on SAP_RCF_* roles, I got only these many roles. Here no other roles for unregistered candidate.
    Please guide me.
    Best Regards,
    Deepak

  • E-Recruiting - Internal Candidates not displayed in candidate search, job postings not visible for internal candidates in job search

    Hi Friends,
    We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
    All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
    Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
    But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
    1) What needs to be done for internal candidates to visible during candidate search ?
    2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
    Kindly provide your inputs.
    Regards,
    ER.

    Hi,
    In SLG1, getting the below error messages for multiple times.
    "Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY 
    The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96  
    Qualification 52000001 does not exist
    The incorrect HR object has the key 01NA60000029 "
    "The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
    Also please state how to differentiate internal and external candidate search pages.
    Regards,
    ER.

Maybe you are looking for