EREC: Internal candidate Start page authorization issue

Hi,
We had upgraded our erecruitment system from SAPK-60404INERECRUIT to
SAPK-60409INERECRUIT after which we are facing the below issue.
While I'm trying to access the start page for the internal candidate
from portal i'm gettin an error" You do not have the required
authorization to use this application"
1)User Id is mapped to PA30-0105
2)In HRALXSYNC report all the objects have green status including
internal candidate
3)The services hrrcf_a_candidate_profile_int and
hrrcf_a_startpage_int_cand are activated. However when I test the same
through R/3 the service hrrcf_a_candidate_profile_int runs successfully
but the service hrrcf_a_startpage_int_cand give the same error.
4)Role and mapping have also been verified.
5)The P-NA->CP->BP relationship exists in the system.
Regards,
Divya

Hi,
We had upgraded our erecruitment system from SAPK-60404INERECRUIT to
SAPK-60409INERECRUIT after which we are facing the below issue.
While I'm trying to access the start page for the internal candidate
from portal i'm gettin an error" You do not have the required
authorization to use this application"
1)User Id is mapped to PA30-0105
2)In HRALXSYNC report all the objects have green status including
internal candidate
3)The services hrrcf_a_candidate_profile_int and
hrrcf_a_startpage_int_cand are activated. However when I test the same
through R/3 the service hrrcf_a_candidate_profile_int runs successfully
but the service hrrcf_a_startpage_int_cand give the same error.
4)Role and mapping have also been verified.
5)The P-NA->CP->BP relationship exists in the system.
Regards,
Divya

Similar Messages

  • E-Rec - hiding links in Internal candidate start page in ECC6.0 por

    Hello,
    I have a requirement to hide some links from the start page of Internal candidate (Employee) in portal.
    I Have done the necessary configuration at the back end SAP-E-Rec --> Technical settings --> User Interfaces > Set user interface with BSP's> Start pages. I also have generated URL using rcf_generate_Url and assigned it in portal.
    But in the Internal candidate (Employee) start page, I get a display called as "Physical Writes". Any clues how this can be fixed pls??
    Best regards
    G Raj

    Hello,
    I have a requirement to hide some links from the start page of Internal candidate (Employee) in portal.
    I Have done the necessary configuration at the back end SAP-E-Rec --> Technical settings --> User Interfaces > Set user interface with BSP's> Start pages. I also have generated URL using rcf_generate_Url and assigned it in portal.
    But in the Internal candidate (Employee) start page, I get a display called as "Physical Writes".
    When assigning the required links to the page group, there are fields in SAP which ask for Online text repository alias title. But thers is no F4 selection option to select from the available list.
    Any clues how this can be fixed pls??
    Best regards
    G Raj

  • E-recruiting - Customizing external candidate start page with a new start p

    Hi ,
    I require some inputs from you on creation of new start page for external candidate.
    I have a requirement to hide Age / Gender fields in the Personal data tab of the external candidate application wizard in the external candidate start page.
    I Created a new start page with I.D "9001" and using customized context i was able to hide the Age and Gender fields. The URL using the customized context looked like below;
    http://XXXXXX.XX.XXXXXXXXX.XXX:8053/sap/bc/bsp/sap/hrrcf_start_ext?sap-client=300&sap-language=EN&rcfSpId=9000&rcfContext=NAEXT
    The external candidate start page requires the following services assignment to a service user;
    hrrcf_apply_ext: Apply with Reference Code (Non Registered Candidate)
    hrrcf_cand_reg: External Candidate, Registration
    hrrcf_unrg_srch: Non Registered Candidate, Job Search
    The service user requires SAP standard role u201CRCF_EXTERNAL_CANDIDATEu201D to provide access to any external candidate to do a job search and register. This role in standard would have application object u201C0002u201D u2013 Standard external candidate start page I.D which would provide access to the start page.
    We have cloned the role to include the customized application object u201C9001u201D and have assigned it to the service user.
    But even after doing this i get an error message when trying to execute the URL in IE which reads "You do not have the required authorisation to use this start page"
    Iam not sure if iam missing anything on the authorisation part. Please advise.
    Thanks
    G Raj

    Hello G Raj,
    it seems you are mixing some things up. The service user is only for all parts of the e-recruiting which are accessable without logging in. This includes services linked to the unregistered search and the registration (where the applicant creates his candidate / his login). The service user is no candidate and has a special role (must not have a candidate object or the candidate authorization role).
    As soon as someone logs into the system, e.g. to his start page, he acts as candidate. Depending on his relation to a P object he is either an external or an internal candidate.
    In your example we are talking about external candidates. These candidates get a reference user assigned on candidate creation which is customized for the external candidate role (here the e-recruiting role) in IMG. Usually it is called RCF_CAND_EXT. The SAP delivery role (here the authorization role) this reference user gets is SAP_RCF_EXTERNAL_CANDIDATE (as long as you are using BSP). You have to copy this role to a customer one and replace the value 0002 of auth object P_RCF_APPL (Application in E-Recruiting) by your customer one 9000.
    Then everything should work fine.
    Best regards
    Roman Weise

  • EREC:Authorization issue in Registration of External Candidate

    Dear All
    We are on EhP 5 and NW 7.3 system with SAP Erec 605 addon.We have a single instance architecture.Need help with user assignment to various WDA ERec services.
    Also whenever i click on register now link in External Candidate Start page ,it asks for SAP backend authorization. In my view this should not happen.
    Please assist.
    Regards

    Hi Shankar,
    Even i'd gone thru tough time to complete the eRec config successfully...!
    You only need the reference user as logon data, as this is for the external service and there won't be any login expected by the External Candidate to the SAP system. When you assign the reference/service users to ICF services.. it means you are saying to SAP system that .. when ever this service is called use the authentication provided in the logon data and the rest is taken care by SAP!
    This is one URL from eREC which will be exposed to internet (via a reverse proxy) and shouldn't be asking for SAP authentication.
    You can use all the standard roles for eRec config, until unless you really have a custom scenario.
    Thanks,
    MS

  • EREC: Internal Error while logging in using Registered External Candidate

    Hi,
    We are on ECC 6.0 EHP 5 & ERECRUIT 605 (0005) and EP 7.0 SP22.
    I'm on the final stages of config on Production system for eRec applications, all works fine and ready for LIVE except the below functionality:
    1. i've registered 2 uses as external candidates using the external url
    2. when trying to login with that user, it throws internal error - this kind of issue didn't happen in DEV/QAS.
    when i've checked the SLG1 below came:
    Serious error; see log
    The error occurred in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56
    The user is not assigned a candidate or an employee
    The error occurred in program CL_HRRCF_START_A==============CM007 line 19
    The user is not assigned a candidate or an employee - this message didn't make me any sense as its the external candidate who is logging into the system.
    Then i've checked that user by running the HRALXSYNC >User: 455DC84C411 > F8. This gave me below errors:
    Determination of connections to object 'CP' of 'US' '455DC84C411' failed
    User 455DC84C411 is not integrated in the organizational model
    This kind of issue didn't repeated while I was configuring the DEV and QAS system, why i'm getting this only in PRD?
    Awaiting for valuable inputs.
    Thanks,
    MS

    Hi,
    I do not really understand what you expect from report HRALXSYNC. This report has nothing to do with the external candidates.
    A common issue when things on the production system are not working like on dev / qs are insufficient authorization tests. So you should check the authorization trace for the sevice user wich is defined in the external alias for the external candidate registration ICF service. Furthermore checking the NA, CP, BP, US objects and the relations between them can help analyse authorization problems on the object creation.
    Rgds.
    Roman

  • Applications Start Page Profile Option Causing Issues

    Hello Oracle Gurus,
    I'm having an issue in a 12.1.3 instance that I think may be related to the "Applications Start Page" profile option.
    For testing purposes, we set the profile to a specific Self-Service page at the Site level. We eventually removed the Site level profile and added it at the user level just for specific users, but since the Site-level profile was set, every time we click the Home link in the upper right-hand navigation, we get an "unexpected error." If we attempt to log in as a user that does not have the Applications Start Page profile defined, we also get an unexpected error.
    After getting the error using either of the methods listed above, if we then try to navigate back to the login page, the instance throws a 500 Internal Error.
    If we close the browser and navigate to the instance again, we're able to log in without any issues with user accounts that have an Applications Start Page profile defined.
    Our "Self Service Personal Framework Mode" is set to "Framework Only" at the site level.
    Bouncing Apache seems to resolve the issue temporarily, but then it comes back again a few hours later...
    We've opened a Service Request, but has anyone else run into this before / have any ideas on how to fix it?
    Here are some related Metalink notes from 11.5.10:
    729375.1 (About the Applications Start Page profile option)
    331814.1 (Error on Personal Home Page when returning to 'Home' link)
    Thanks!
    Anne

    The issue is not specific to a responsibility or application.
    Here is the error:
    Fatal NI connect error 12170.
    VERSION INFORMATION:
         TNS for Linux: Version 11.1.0.7.0 - Production
         Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
         Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
         TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
    Time: 27-JAN-2011 09:46:02
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
    TNS-00505: Operation timed out
    nt secondary err code: 110
    nt OS err code: 0
    Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.30.31.107)(PORT=1502))
    Thu Jan 27 09:53:30 2011
    Incremental checkpoint up to RBA [0x42.e3635.0], current log tail at RBA [0x42.e37e1.0]
    Thu Jan 27 10:13:31 2011
    Incremental checkpoint up to RBA [0x42.e602b.0], current log tail at RBA [0x42.e6146.0]
    Thu Jan 27 10:33:33 2011
    Incremental checkpoint up to RBA [0x42.e7bc9.0], current log tail at RBA [0x42.e7d51.0]
    Thu Jan 27 10:53:35 2011
    Incremental checkpoint up to RBA [0x42.e995f.0], current log tail at RBA [0x42.e9ac9.0]
    Thu Jan 27 11:13:37 2011
    Incremental checkpoint up to RBA [0x42.ec163.0], current log tail at RBA [0x42.ec3f7.0]
    Thu Jan 27 11:23:48 2011
    Starting background process CJQ0
    Thu Jan 27 11:23:48 2011
    CJQ0 started with pid=8, OS id=17239
    Thu Jan 27 11:33:39 2011
    Incremental checkpoint up to RBA [0x42.ee08f.0], current log tail at RBA [0x42.ee216.0]
    Thu Jan 27 11:53:41 2011
    Incremental checkpoint up to RBA [0x42.efd07.0], current log tail at RBA [0x42.eff13.0]
    Thu Jan 27 11:54:02 2011
    Stopping background process CJQ0
    Thu Jan 27 12:13:43 2011
    Incremental checkpoint up to RBA [0x42.f25c0.0], current log tail at RBA [0x42.f2e4b.0]
    Thu Jan 27 12:33:45 2011
    Incremental checkpoint up to RBA [0x42.f4cae.0], current log tail at RBA [0x42.f4e4b.0]
    Thu Jan 27 12:53:47 2011
    Incremental checkpoint up to RBA [0x42.f6e8a.0], current log tail at RBA [0x42.f6fb7.0]
    Thu Jan 27 13:13:50 2011
    Incremental checkpoint up to RBA [0x42.fa3d0.0], current log tail at RBA [0x42.fa845.0]
    Thu Jan 27 13:33:52 2011
    Incremental checkpoint up to RBA [0x42.fc7d9.0], current log tail at RBA [0x42.fc989.0]
    Thu Jan 27 13:53:55 2011
    Incremental checkpoint up to RBA [0x42.fed4e.0], current log tail at RBA [0x42.ff12e.0]

  • Internal Candidate Issue in E-Recruiting

    Hello folks,
    I am currently working on getting E-Recruiting to work on our system. We are using ERP 2005, EP 7.00 with the latest service packs. I got all the BSPs to work fine, have portal users assigned to pernr's in the backend who are managers, employees, recruiters, etc.
    When i logged in as an recruiter from the portal and click on 'Candidate Overview' in order to look at all the candidate, i saw only a few of them and not all of the employees. Then i ran the report(HRALXSYNC) to create candidates for all the employees of a certain org. This orgranizational unit contains two employees (employee1 and employee2).
    After this, i ran the report (RCF_CREATE_USER) for employee1 and he shows up fine under the Candidate Overview search. When i try and run the same report for employee2, it says candidancy already exists, but he doesn't show up under Candidate Overview. Both these users are assigned the role (SAP_RCF_INTERNAL_CANDIDATE) so i am not sure what is the issue here.
    Can anyone please let me know if there is anything i am missing out on ?
    Thanks,
    Bhushan.

    Dear Emilio,
    To be able to use the workflow functions, you must create a system user (such as WF-BATCH) in the standard system.
    For more information, see the Implementation Guide for SAP E-Recruiting under Technical Settings ® Workflow ® Workflow in E-Recruiting.
    In SAP E-Recruiting you must also assign this user (in addition to the other users) to a candidate. You can do this by using the RCF_CREATE_USER report.
    Also you will need the correct authorizations : External candidate  SAP_RCF_EXTERNAL_CANDIDATE
                                                                               Internal candidate   SAP_RCF_INTERNAL_CANDIDATE
    Check out also online help :
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/06/0aa70872891742be5757a7f00d25b2/frameset.htm
    Hope it helps
    Christine
    Edited by: Christine Morin on Sep 1, 2009 4:13 PM

  • BI 7.0 Analysis Authorization issue: some reports displaying a blank page.

    Hi All,
    This is regarding BI 7.0 Analysis Authorization issue.
    Overview:
    we have restricted some queries at infoobject level.
    Issue:
    a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
    b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
    c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
    d.  Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
    e. But when we execute the same report with Auditors ID then we get a blank page.
    Any idea why this is so?

    Hi Neha,
    I tried the below also,
    GL Acnt
    I EQ 0000134010
    I EQ :
    but still it didn't work.
    No Infoobject is missing in Authorization Object.
    For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
    As mentioned earlier also it is giving me the below message,
    ""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION                                                                       RS_EXCEPTION        301CL_RSR_RRK0_AUTHORIZATION                         AUTHORITY_02"
    Kindly suggest, since this is a show-stopper for us!
    Thanks,
    Ishdeep Kohli.

  • There appears to be a MAJOR issue (hang/memory leak) in "about:home", also known as the Firefox Start Page, in Firefox 26.0 on Windows!

    There appears to be a MAJOR issue (hang/memory leak) in "about:home", also known as the Firefox Start Page, in Firefox 26.0, on Windows!
    observed on:
    - Windows 7 x64 machine with 12GB RAM and high-performance CPU (core i7-920)
    - Virtual Machine guest running WinXP SP3 (in Oracle VirtualBox) on the same machine
    - Intel Atom D525 netbook with 4GB RAM, running Win7 x64
    Neither of these machines are connected via Sync or anything like that. The Firefox instance on the VM is a fresh/clean install.
    The problem:
    - 100% cpu usage for 10 seconds, memory usage (PF usage in XP) goes up to 1.7GB
    - if "about:home" is the Firefox Start Page, effectively it hangs the computer at Firefox startup for 10 seconds
    - if "about:home" is NOT the Firefox Start Page, startup is fine - BUT if I press the "home" button on the toolbar it loads "about:home" which causes the same issue again

    Thank you cor-el! Your suggestion has solved the problem on my WinXP VM which I was using to test, and I will soon confirm that it has also solved the problem on my primary Win7 desktop.
    To recap:
    - I set "browser.aboutHomeSnippets.updateUrl" to an empty string
    OLD VALUE: https://snippets.mozilla.com/%STARTPAGE_VERSION%/%NAME%/%VERSION%/%APPBUILDID%/%BUILD_TARGET%/%LOCALE%/%CHANNEL%/%OS_VERSION%/%DISTRIBUTION%/%DISTRIBUTION_VERSION%/
    NEW VALUE: (blank)
    - I deleted the folder \storage\persistent\moz-safe-about+home under the Profile directory
    Actual folder name on WINDOWS XP:
    C:\Documents and Settings\<USERNAME>\Application Data\Mozilla\Firefox\Profiles\<PROFILENAME>\storage\persistent\moz-safe-about+home
    However I have a concern that the '''OLD VALUE''' of "browser.aboutHomeSnippets.updateUrl" will creep back in, in a future update! Can you communicate this issue to someone on the development team?

  • Internal Candidate in eRec

    Dear All,
    We are using standalone eRec server and i am done with external canidate process.
    Now we require internal canidates process.
    Can anyone pls clarify the following queries
    1)For the internal canidate will be accessing the career and Jobs link from ESS so what all configuration that i need to do for This from the backend and front end.
    2)How the internal candidate will be converted as an NA object in erec server and how this happens.
    3) If any one explain me how the internal canidates process happenes would be really great help

    Hello Vijay,
    for question 1)
    you need a general decision if internal employees should access the system via e-rec frontend or e-rec backend server and which technology they use bsp/webdynpro. I'd go for backend except the hr network is separated from the overall intranet. Settings are found in SPRO under the technical settings for candidate ui.
    Then you need a decision if you use ESS or not as it is not required. This decision should be made on your general portal strategy and availability. If you want to use portal there is an e-rec ess scenario but it is a bit outdated and some of my customers created own portal roles / iViews to change / reduce navigation levels.
    for question 2)
    Standard way for transfering employees to e-rec and create candidates is ALE. ALE processing differs between all releases up to EhP3 and EhP4.
    for question 3)
    The process for internal candidates / internal applications depends on the customer of course. I try to keep it as near at the process for external candidates as possible. It makes things a lot easier.
    Kind Regards
    Roman

  • Start page Internal ITS into Portal

    Hello guys!
    We are having SRM 4.0 with Internal ITS on WAS 6.40 and EP SP16/17, also the SRM Business Package is implemented.
    I would like to have an initial SRM start page, just like the BBPSTART that is on the ITS. (But only the lower right part of the BBPSTART with the 5 headers and the 5 links into main areas of SRM).
    Anyone of you have made this or know how to do it?
    My option now is to involve a WebDynpro and the UME and then list a few main areas and also a few links to other parts of the portal.
    Any help is highly appreciated and will be rewarded!
    BR
    Mattias

    Thank you for your answer.
    Users still need access to the standard BBPSTART transaction.
    Maybe it is possible to only keep the right hand side part of the BBPSTART transaction but I don't really know how to do that.
    It seems to be that the HTML template BBPGLOBAL 650 is the one I should use ... how would I make use of that?
    I'm a Portal developer with great knowledge of ABAP but I'm a beginner in the internet service SE80 area
    BR
    Mattias

  • Starting Point for Internal Candidates in E-Recruitment

    Hi Experts,
    We recently upgraded our E-REC to SAPK-60405INERECRUIT.  I noticed that hrrcf_a_startpage_int_cand is now inactive.
    Is hrrcf_a_startpage_int_cand the starting point that you use for all your internal candidates, or is there another option?
    Thanks in advance.
    Shane

    Hello Shane,
    I assume you have the effect that after importing the support package the ICF service went from active to inactive. This has nothing to do with the support / usage of this ICF service. It is a technical behaviour that ICF services or complete subtrees of services can change from active to inactive during release upgrade, on applying a support package or even when transporting an ICF service.
    So you should add "checking the state of ICF services" to your patch checklist as it is something you should always verify, same like run the SGEN, invalidate the http server caches or adjust the otr text contexts.
    Kind Regards
    Roman

  • E-Recruiting 6.04. Issue with internal candidates e-mail.

    Hi,
    We are on E-Rec 604 with seperated standlone e-rec system.
    We did the initial transfer of employees with ALE and we though that all were ok, but now we realized that there are some internal candidates that no have e-mail adress in e-recruiting.
    We have been investigating and those employees have filled the infotype 105 subtype 0010 in Hr system. In E-Recruting system the user created by ALE has the e-mail too, but in transaction BP only a few of them have filled the field e-mail in the block of adress independent comunication. So only this few internal candidates have e-mail in the portal of E-Recruiting.
    We are looking for any differences of those employees in HR system but we can´t find anything.
    Someone could help me with the reason of this problem, please?.
    And someone know if there is any way for repared this in the e-recruiting system.
    Best Regards,
    Esther

    Hi,
    I just want point out the HCM ALE processes. Firstly independently of connected to eRecruiting or not.
    The message type HRMD_B is containing the infotypes belonging to the software component SAP_BASIS.
    The message type HRMD_ABA is containing the infotypes of the message type HRMD_B and the infotypes belonging to the software component SAP_ABA.
    The message types HRMD_B and HRMD_ABA must be used to distribute HCM data into non-ERP based landscapes.
    The message type HRMD_A is containing the infotypes of the message type HRMD_B and the infotypes belonging to the software component SAP_HR. It should then be used to distribute HCM data into an ERP based landscapes.
    Esther is describing an eREcruiting standalone based on an ERP landscape. Therefore, the message type HRMD_A should be used.
    Then, from the HCM integration in Business Partner point of view, the standard implementation of the BAdI HRALE00INBOUND_IDOC should be deactivated. This implementation is normally converting the object P into a CP, because the object P is known only in HR (and ERP based landscape). In an ERP based landscape, the P will exist with its CP. The integration to the BP will not work during the ALE-Inbound process, but during the Synchronization run (report HRALXSYNC). The implementation makes sense only in none-ERP based landscapes (where message type HRMD_ABA will be used).
    Ester should then adapt her distribution model to be able to distribute the necessary infotypes for the consistency of a P (infotypes 0000, 0001, 0002, 0003) as well as the one which are used for the BP-integration (infotype 0006 subtype 1, infotype 0009, infotype 0105 subtypes 0001, 0005, 0010, 0020), as well as the HR-object CP and its relationship to the P (infotypes 1000 and infotype 1001 subtype B209).
    With the hope it is clarifying the usage of the message types depending on the used scenario and on the used landscapes.
    Best regards.
    Pierre

  • Issues with start page and default headings

    Hello there. I'm trying to give our school newspaper's webpage an overhaul using BC (without dreamweaver) and have run into two problems.
    First off, every time I set one of my pages as the start page, it doesn't stick. I've named it home, hit start page, base url still says no default start page. I've tried creating a new page called index, and it still doesn't work.
    Base URL: http://bellmagazine.businesscatalyst.com/
    Desired Home page: http://bellmagazine.businesscatalyst.com/index
    My second problem is visible on both links. Above and below the content are numerous links and text about BC, along with a floating "report abuse" button. I cannot find these in either the design or html tabs, and would like to remove them from my site. How do I accomplish this?

    Hi,
    I've checked your site and was able to set the domain's start page to reference the /home page as required. 
    This is appears working at the moment.
    In regards to the "abuse report" button that will remain visible only in trial.  Once a site is upgraded this button will be removed automatically. 
    Kind regards,
    -Sidney

  • SAP E- Recruitment - Internal candidate

    Hi,
    When i try loging into Internal Candidate page iam getting an error message "an internal error occured pls try again later". EREC and ESS are on the same system and Eph 1.
    but i have created the necessary i.e
    1. SAP_RCF_internal - reference user is created
    2. Dialog user - employee is available
    3. SAP_RCF_Internal Candidate role and its profile is maintained
    4. Following BAdI are activated.
    HRSYNC_P
    HRPAD00INFTY
    5. have also run the report HRALXSYNC in the background.
    Would be great if you could what is that iam missing. Would appreciate your knowledge sharing on same.
    Thanks for your time
    Regards
    Saipriyan

    do you have a valid 105?
    also look in slg1 to see what is the error, this usually tells you where the issue is.

Maybe you are looking for

  • Strange about invoking web service method declared “string  method(void)”;

    Dear forum readers I’m experimenting with OpenESB and web services. I’ve create a simple web service using NetBeans 6.1. The method consists of a single method, getTime, that is declared: String getTime() My current experiment is to invoke this metho

  • Error when installing Oracle Lite for Mobile Field Service Laptop

    Hi, I am facing a strange problem when installing Mobile Field Service Laptop agent "Oracle Lite" on my laptop. When I run the setup, it asks me username and password, after entering the information, when I proceed, I see setup window which displays

  • Save as reduced file size

    I receive pdf's to be posted on the web and need to reduce the file size. Is there a way to do this with a keyboard shortcut or some other way besides clicking on the file>Save As menu?

  • I have an 'Unknown error' message pop up when i try and sign in on itunes

    I have never had a problem signing in until now, I tried to sign in to add a song to my wish list and itunes wanted my password for my Apple ID. I put it in and a red message saying 'unknown error' popped up. I have reset my password and it still won

  • Table SWWUSERWI empty

    Hi Colleagues, I'm trying to implement a basic travel workflow approval process. I've created a basic organizational plan, as attached (organizational_plan.PNG). The user Maria and Manuel are both linked with valid system users. When I execute transa