ERec- Notification for Vendor submitting a candidate

Hi Experts,
We need to implement a small enhancement in Erec system.As soon as a Vendor submits a candidate,a notification is required with details of the Requisitiona against the contractor,name of the vendor,name of contractor submitted.
This notification email should be triggered at run time .We dont to create a Work- flow for the same.Should the BSP application be enhanced or is there any other alternative for same.
Thanks in advance!
Cheers
Akash
ERec

Hi
I have not tried this. I guess, Yes, ideally a notification should be sent.
Refer report - RBBP_NOTIFICATION_OFFAPP (Forward work items to other mail clients)Also See Offline Approval!http://help.sap.com/saphelp_srm50/helpdata/en/31/ec423b4ac8d506e10000000a11402f/frameset.htm
Refer to this link as well.
http://help.sap.com/saphelp_srm50/helpdata/en/c0/7a0859ee91d54aa48a69fb5d2c4089/frameset.htm
Regards
- Atul

Similar Messages

Auto creation of notification for vendor problems

Hi, pls advise how to generate notificatin for vendor problems during goods receipt. can it be possible to generate automatically when there is problem for the vendor for the goods which are subjected to GR. Pls advise.

Hi Yadav,
pls advise how to generate notificatin for vendor problems during goods receipt.
While doing GR( which is stores activity) why you want to generate Notification, once GR is made the inspection lot is generated, then while doing RR if some thing is not as per specs then you can raise notification automatically.
can it be possible to generate automatically when there is problem for the vendor for the goods which are subjected to GR. Pls advise.
You will be able to generate auto notification only after you do GR, while doing RR. This authorization you can given to stores but again unless you inspect the material how you will know that there is problem in material and you need to raise notification.
for auto notification while RR, you have to assign notification type Q2/ N2 at that inspection type at customizing.
Also you should tick 'Defect recording' tab in control indicator of MIC's, this will automatically pop up the Window for defect recording and thereby notification.
Best Regards,
Shekhar

Email Notifications for Forms Submitted

How can I be sure that I am notified by email when a form has been submitted?

You can turn on notifications by going to Options tab -> Notifications.
Randy

Automatic notification to vendor for PO delivery

Dear all.
We have vendor delivery day and vendor email information in vendor master data,
Whether its possible to trigger email notification to vendor before near the vendor delivery day,
for example, if we have a vendor whose delivery day is 30 days, and one PO was created on Aug 1,
so the goods should be delivered before Aug 30, whether it 's posible to send email notification to vendor before Aug 30 automatically, for example we set 10 days before delivery day, so email can be sent on Aug 20?
Please let me know your thoughts on this.
Regards
Shyam

Hi,
Have a look at the reminder functionality within SAP - I believe you can set negative amounts for the number of days from delivery before the reminder is sent out which would fulfill your requirements.
i.e. Delivery Date = 30.08.2010
Reminder 1 (on inforecord or material master - it's copied to the PO when the PO is created) is set to -10.
Then you schedule the reminder job to run each day (trans ME91F). It checks to see if there are eny reminders to send out and in the case above, a reminder would be sent out on the 20.08.2010.
Kind Regards,
Steph.

Asking for vendor login while opening Attached docs for Vendor

Hi,
We are using SRM 4.0 classic scenario.
Having two issues regarding Vendor Bid..
1.
When the Bid invitation is submitted we would like the system to send the Extranet alias URL to the vendor for logging in rather than the original ITS URL for vendor login.
So do we have to control this using the Smarform 'IV_URL' parameter
or
i tried to add this extranet alias URL as the EXT_ITS attribute in the Org structure and this shows up in the vendor e-mail. But does not work. Are there any other settings to be taken care of to make this work.
2.
The external vendor logs into the Webgui using the Single sign on setup.
Now when the vendor tries to open the attachements sent in by the Purchaser it asks them for a SAP login which the vendors will not be aware of.
Any ideas on how to avoid this step as we dont give our vendors the SAP user id and password.
Regards
Manoj A.

Hi,
We are using SRM 4.0 classic scenario.
Having two issues regarding Vendor Bid..
1.
When the Bid invitation is submitted we would like the system to send the Extranet alias URL to the vendor for logging in rather than the original ITS URL for vendor login.
So do we have to control this using the Smarform 'IV_URL' parameter
or
i tried to add this extranet alias URL as the EXT_ITS attribute in the Org structure and this shows up in the vendor e-mail. But does not work. Are there any other settings to be taken care of to make this work.
2.
The external vendor logs into the Webgui using the Single sign on setup.
Now when the vendor tries to open the attachements sent in by the Purchaser it asks them for a SAP login which the vendors will not be aware of.
Any ideas on how to avoid this step as we dont give our vendors the SAP user id and password.
Regards
Manoj A.

Approval for Vendor Bid

Hi All,
I have activated "WS79000010"- No approval required for vendor bid and maintained the required start conditions for this workflow, but when the vendor submits the bids the system throws an error that " No approval workflow found. Inform system administrator".
We are using SRM 5.0 with SP09
Any inputs on this issue are highly appreciated.

Hi,
Please check your starting conditions.There seems to be some problem with that as the system is unable to identify the workflow to be triggered.
Also see teh foll note and related threads for more pointers;
Note 865269 - Bid: Incorrect workflows, incorrect approval preview
Re: Err "No workflow found" while creating bid
Re: URGENT : Workflow for Vendor Bid
Re: Urgent: Quotation Workflow: Message Approval WF is ambiguou
BR,
Disha.
Pls reward points for useful answers.

Does SAP support open tender process for Vendor selection

Hi all,
Does SAP Support Open tendering process for Vendor Selection.
I men in my clients scenario. For vendor selection process for any material starts with advertisement of tender in newspaper. Vendor replies back with his quotation. After receiving technical and commercial quotation, the organization go for technical bidding and those who qualify in technical bidding they contest for commercial bidding. After commercial bidding, comparative statement is prepared and then purchase committee approves the vendor. The problem is that any no. of vendors from any where can give their reply to the tender as it is a government organization. So, how to map this process in SAP as we are not directly sending RFQ to the vendor, instead he reply back with quotation directly once he sees the advertisement in newspaper.
I want you all to suggest me whether to keep this process in SAP or out of SAP. waiting for your response.
Regards,
Amit

Hi Ravi,
Thanks for your response. My problem is that the organization advertise its tender in newspaper of all india circulation and seeing that tender vendor reply back with quotation. They don't identify who all are the vendors to whom RFQ is send. only when reply of vendor comes with quotation client comes to know about the vendors submitting quotation. Normally one vendor is selected for one material and 20 to 25 vendors give their quotation. Is it feasible to bring those 25 vendors in SAP if only one will be selected. Because in any way, for any processing we need to create vendor in SAP. So do we need to create 25 vendors, though we know we require only one finally. Can you please clarify this issue. If you want I can mail you the whole process map.
Thanks & Regards,
Amit

Sp_Transaction Notification For Purchase Order Item Checking

Hello All,
I need to create a sp_Transaction notification for Purchase Order where system will check that the document to be added
with Vendor 'A' and ItemCode 'ERT' should not be be previously added for the same vendor 'A.
Example:-
Doc No. Vendor Item Code
1 A ERT
Is added
Next if the Purchase Order is added with same vendor and same Item then system should block the entry and throw a message
'Purchase Order Already Entered for Vendor 'A' with Item Code 'ERT'"
This checking will be done for each line item of currently entered Purchase Order Document.
Thanks ,
Amit

Hi Amit,
i found this on forum. Try this,
if @object_type = N'22' and @transaction_type in (N'A', N'U')
begin
declare @line1 int
declare @lin1 int
declare @out1 int
Set @out1 = 0
SET @lin1 = 0
Declare @Vend as varchar(200)
Declare @ItemCode as varchar(200)
Select @Vend = CardCode From OPOR Where DocEntry = @list_of_cols_val_tab_del
Select @line1 = Max (LineNum)FROM POR1 WHERE POR1.DocEntry = @list_of_cols_val_tab_del
While @lin1 < @line1
Begin
 Select @ItemCode=ItemCode From POR1 Where DocEntry=@list_of_cols_val_tab_del and LineNum = @lin1
 if (SELECT COUNT(T0.DocEntry) FROM POR1 T0 inner join OPOR T1 on T0.DocEntry = T1.DocEntry
 WHERE T0.ItemCode = @ItemCode and T1.CardCode = @Vend)> 1
 Begin
 Set @Out1 = 1
 Break;
 END
 Else
 Begin
 Set @lin1 = @lin1+1
 Continue
 END
END
Set @lin1 = @lin1 + 1
if @out1 = 1
begin
 Set @error = 1
 Set @error_message = 'Item Code in line ' + CONVERT(nvarchar(4), @lin1) + N'already Exists For This Vendor!'
End
END
Check this too Stored procedure in purchase order for duplicate item for a vendor
Thanks,
Joseph
Edited by: Joseph Antony on Jan 11, 2011 1:37 PM

Assigning tax code for vendor selection

how to Create and develop user exits for the me21n where as per the vendor selection tax code has to be assigned.

Transaction Code - ME21N                    Create Purchase Order
Exit Name           Description
LMEDR001            Enhancements to print program
LMELA002            Adopt batch no. from shipping notification when posting a GR
LMELA010            Inbound shipping notification: Transfer item data from IDOC
LMEQR001            User exit for source determination
LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001            Customer-Specific Source Determination in Retail
M06B0001            Role determination for purchase requisition release
M06B0002            Changes to comm. structure for purchase requisition release
M06B0003            Number range and document number
M06B0004            Number range and document number
M06B0005            Changes to comm. structure for overall release of requisn.
M06E0004            Changes to communication structure for release purch. doc.
M06E0005            Role determination for release of purchasing documents
ME590001            Grouping of requsitions for PO split in ME59
MEETA001            Define schedule line type (backlog, immed. req., preview)
MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1            Enhancement to Document Overview ME21N/ME51N
MEVME001            WE default quantity calc. and over/ underdelivery tolerance
MM06E001            User exits for EDI inbound and outbound purchasing documents
MM06E003            Number range and document number
MM06E004            Control import data screens in purchase order
MM06E005            Customer fields in purchasing document
MM06E007            Change document for requisitions upon conversion into PO
MM06E008            Monitoring of contr. target value in case of release orders
MM06E009            Relevant texts for "Texts exist" indicator
MM06E010            Field selection for vendor address
MMAL0001            ALE source list distribution: Outbound processing
MMAL0002            ALE source list distribution: Inbound processing
MMAL0003            ALE purcasing info record distribution: Outbound processing
MMAL0004            ALE purchasing info record distribution: Inbound processing
MMDA0001            Default delivery addresses
MMFAB001            User exit for generation of release order
MRFLB001            Control Items for Contract Release Order
AMPL0001            User subscreen for additional data on AMPL
No of Exits:         35
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Activate notification for not getting material certificate

I am QM user,In case of 01 type QA32 inspection,where I need a material TC from vendor,In case I am not getting TC from vendor end,How I could process the result recording/UD & activate notification for not getting material TC?Is it possible to acitvate the same during result recording?

QC55 is a different functionality. It is used to prevent UD before certificate receipt is confirmed.
You can do dunning but not creating QN from this transaction.
What I had suggested was
1. in QE01 transaction, click on 'create defect'
2. Enter report type
3. select defect code corresponding to TC
4. Click on activate notification.
5. Add tasks/ activities to the notification. process the QN.
If you are not able to create defect notification, check config under
QM --> QN --> Defects recording.

Notification for Receiving payments

A client tells me they sent a payment today at 1pm, about 3 hours ago. I have not received any notification emails and there is no activity showing up under "summary" on my paypal account. How long does it usually take?

Hi,
Please refer the below link.
F110 - S_BTCH_ADM
Since there is no check for vendors, there are 2 authorizations which
are necessary to start the payment run:
1) F_REGU_BUK (company code) and F_REGU_KOA (account type).
2) Basis administration objects S_BTCH_ADM and S_BTCH_JOB.
The program design assumes that 2 different people are responsible for
creating the payment run and for releasing the jobs. Please review the
documentation for object S_BTCH_JOB. In addition, please review the
source code for program SAPF110V via trans SE38; click on Display and
select Edit -> Find using "authority-check". This will provide you with
the authorization objects which are checked in program SAPF110V.
Regards,
Raj.

Report for vendor balances

Hello,
I need to run a query or transaction to find the vendor opening and closing balances at the beginning and end of the financial years. Is there any standard report that can provide both these amounts? or any transparent tables that hold them?
Thanks a lot!

Hi,
Go to SAP Menu >Accounting >Accounts Payable >Information System >Reports for Accounts Payable Accounting >Vendor Balances
Here you can find variety of reports for vendor.
Thanks,
Nirav

Opening & closing balances for Vendor

Hi Experts,
I am doing a report where in i need to get the opening & closing balances for Vendor(s). I am using BSIK & BSAK tables. Are there any more tables involved and how do i carry out the calculations?
Please help.
Thanks
Dany

Hi,
There are various t. code to check line items for vendor like: S_ALR_87012103 but Any table is not helping to check opening/closeing balance for vendor.
Table BSIK and BSAK are having are records for open items and close items for vendor and system calculate the balance by using these tables.
Regards,
Vinod

Creation of a shipping notification for a PO in EBP from a XML file via XI.

Hi everybody.
We are trying to create a shipping notification for a Purchase Order in Enterprise Buyer from a XML file via XI.
For to do it, we are using DespatchedDeliveryNotification_In message interface (transaction SPROXY).
But when we execute it, the system show us next message:
"An error occured within an XI interface: An exception with the type CX_GDT_CONVERSION occurred, but was neither handled locally, nor declared in a RAISING clause Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F5B; Line: 4"
No more information is available.
Is there any additional transaction to see more information about the error message?
Is there any documentation about this XML file, mandatory fields, examples?
We populated some fields in our XML file, but we do not know if the problem is with mandatory fields, data, program error
I will thank for any information
Thanks in advance.
Raúl Moncada.

Raúl,
This is because of the inbound UOM.
The include LBBP_BD_MAPPING_SAPXML1F5B is in charge of mapping the item Unit Of Mesure (UOM) sent in the ASN XML file (it should be an ISO code).
You can test FM UNIT_OF_MEASURE_ISO_TO_SAP with this inbound ISO code.
PS: you should create an OSS message so the mapping sends back an error message instead of generating an uncatched exception (that generates a dump).
Rgds
Christophe
PS: please reward points for helpfull answers

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

ERec- Notification for Vendor submitting a candidate

Similar Messages

Maybe you are looking for