EREC: Please explain the setup for knock-out questions in questionnaires

Hi
Can anyone help me with the setup procedure for working with knock out questions in SAP 604 SP1.4?
I know the basics, but can't seem to figure out how to set it up.
Greatly appreciated
Jakob

Hi Roman,
I also have a question regarding the Knock out questionnaires in EHP4.  I have set up a single selection questionnaire.  I would like to see a green light for all but one of the answers and I can not make this happen. If I mark the 4 I want green as "Expected" they appear red as does the one that I don't want to be expected. If I gradually mark them 100, 90, 80, 60, they are all green, even the one I marked with zero points. If I gradually mark them and mark them expected they are ready.   I have tried 9 different variations.
Here is what it looks like:
What was your most recent PEP rating? 
LP
SP
CP
IP
NP
I want green as my result if the internal candidate picks any of the first 4 and red if they pick NP.  I am just unsure of how to make this happen. Any advice you could provide would be most appreaciated!
Thank you,
Kelly

Similar Messages

  • Oracle modrator ---please explain the reason for locking thread

    Hi,
    https://forums.oracle.com/thread/2583144
    and your active discussion at
    https://forums.oracle.com/thread/2583143
    the first above mentioned 2  threads for creating character sets with existing database without taking backups.It was crucial tasks and below mentioned thread was creating new database and find out the ways for charactersets .both are different threads and ways to work and as well as methodology
    i will be highly greatful , if u can explain the reason for blocking below mentioned thread
    creating addtitional database
    thanks

    It is all the same issue.
    ... manipulation and/or creation of databases with changes in character sets and how those character sets influence the functionality of the databases.
    Keep your thoughts, conclusions and responses to those that reply to you in one contiguous thread.
    Keep the evolution of your issue in one place.
    This site is an online user-to-user forum.
    It exists for more than just you.
    Once your discussions are finished, others are going to read them and (hopefully) learn from them so that they don't even need to post a new thread of their own.

  • Critical Errors Were Found in Setup. Please see the Setup Logs for Details

    Hello everyone. I have recently gotten Adobe Flash CS4 and i was really happy, until i kept getting the same error whenever i tried to install:
    "Critical Errors Were Found in Setup. Please see the Setup Logs for Details"
    I do not know what is the cause of the problem, but i have installed Adobe Photoshop CS3 succesfully without any problems. Please do help. I checked the setup logs, but i have no clue what it is saying, and its too long to post here.
    Thank you for your time and help.

    We've all been there with the frustration.
    And I'd really like to see you get back up and running. I'm a bit of an insomniac and tend to go back over the day while I'm pretending to sleep, and a couple of new things filtered back into my mind. There have been, I think, some problems reported about conflicts with some scanner drivers, and of course with firewalls, anti-virus programs, and the like. I think iTunes and instant messengers are also on that list.
    Make sure you turn off everything non-essential before trying to do your installation (and I'd probably do the same thing before running the scripts again). I do this by running MSConfig on XP and going to the startup tab. I uncheck everything I can't identify as being essential (which means I pretty much only leave the mouse driver checked. You may need to google some of the stuff to find out what it is) and then go to the services tab and hide all Microsoft services. From what's left I again uncheck everything that isn't required to run the system. Bonjour, if you see it, should be left active as it is used by the CS3 installer. Restart the computer.
    This should have turned off pretty much everything that could have been conflicting with the installer. Go to windows security center and make sure the windows firewall is also temporarily turned off, if you use it, and you should be ready to go. It can't hurt to try the add/remove programs again, but it probably won't show any adobe products anymore if you've run the scripts correctly (did you also run the MSI cleanup utility?).
    After you've finished, you can run MSConfig again and reset to standard startup.
    Peter

  • When trying to create connection using Contribute 6.5, get error message "Unknown error.  Please see the log for detail."  The log says "Network connection timed out."  What do I do now?

    Have been using Contribute 6.5, and earlier versions, for years with Hostway without any problems.  All of a sudden I cannot create a connection to our website.  Tried to chat with Adobe a twice now and got no help.  Yesterday they started a chat with me, then ended the session without any communication!  My problem has been going on for several weeks now.  I uninstalled Contribute, downloaded and installed again, but it did not help.  Hostway had me connect with Zilla and everything worked fine.  So, they say the problem is with Adobe.    The last attempt ended with "Unknown error. Please see the log for detail."  The log says "Network operation timed out."  Does anyone have any suggestions?

    Hi There,
    Can you please try using any other Internet connection outside your company's network and see if it is working? Alternatively, Can you please try the below settings from the Advanced... Menu while creating the connection using FTP details and try to create the connection again:
    Regards,
    Mayank

  • CS4:  "Critical errors were found in setup. Please see the setup log for details" !!

    I am using Win XP Pro SP3. I have CS3 installed, and successfully installed Dreamweaver, Fireworks and Flash from CS4 Design Premium. Then I successfully uninstalled DW, FW and FL CS3.
    When I tried to open a SWF in Illustrator it failed to open, and then I tried to create a really simple SWF (a rectangle) by exporting from Illustrator and tried to open that and it also failed. Whenever I tried to open or place ANY SWF into Illustrator I get a "file *** is in an unknown format and cannot be opened" error.
    I decided there must be a corrupt file, maybe the upgrade must have affected some Illustrator files, so I tried to repair the CS3 installation. After over 2 hours of INTENSE FRUSTRATION having to constantly switch CS3 and CS4 disks many MANY times, the installation failed, listing "common files" that were missing from non-existent folders such as "C:\Documents and Settings\[username]\Desktop\Adobe CS4\Fireworks CS4\payloads\etc
    When I tried to repair the CS4 installation after loading all the profile settings it errors before the installation window comes up, with "Critical errors were found in setup. Please see the setup log for details". Then it shuts down the installer. I then tried to do a system restore and system restore failed on all restore points!
    Please help:
    1. Where is "the setup log"?
    2. Will creating and populating the folders mentioned in the failed CS3 installation from the CS4 disk allow it to work?
    3. How can I uninstall CS4 if I can't even get to the installation window?
    4. Has Adobe just DESTROYED MY REGISTRY BEYOND REPAIR!!!???

    im haveing a huge irritation useing illustrator cs4 live paint bucket because i can use everything else apart from the paint bucket which should be the easyiest tool to use sometimes it works with the white arrow sometimes it doesnt i sometimes get this below message
    the selection contains objects that cannot be converted. live paint groups can only contain paths and compound paths. clipping paths are not allowed
    the lines which i have drawn are connected which i believe have to be in order to use the paint bucket and i have no clipping paths so i am am baffled
    i presume it is because the line is set to 0.01 it seems the live paint bucket wont notice thin lines, but i tried makeing the line thicker so i could use the paint bucket and it still doesnt work.

  • TS1503 In the iPhone, please explain the requirements in settings for Apple id, iPhone and iCloud

    In the iPhone, please explain the requirements in settings for Apple id, iPhone and iCloud

    You can use 1 unified Apple ID for iTunes so you don't have to repurchase apps.   That part is fine.
    For iCLoud/iMessage/Facetime you should each have a unique ID so the 2 phones will be separate and you won't accidentally erase each other's content and overwrite settings, nor will you get the others messaages by mistake.

  • A consent for a new eula, please explain the ramification of these new terms

    4. Your Compliance With This Agreement.
    You acknowledge that your compliance with the terms of this Agreement may require you to provide certain notices to, obtain certain rights from, and impose certain obligations on your Clients and/or users of the websites hosted by the Services. To that end, you agree that each website for which Adobe provides Services on your behalf (including, if you are a Partner, your Clients’ websites) will contain a clear and conspicuous link to a terms of use and a privacy policy that comply with all applicable laws, rules, and regulations.
    5. Partner Obligations.
    (c) You are responsible for your Clients’ compliance with applicable laws in connection with their use of the Services.
    (g) You have or will obtain all rights necessary for you to grant Adobe the licenses granted in Section 16 (“Content”), below.
    16. Content.
    You (if you are a Site Owner) or your End Users (if you are a Partner), and/or each such party’s respective licensors, retain ownership of any information, content and/or materials that they submit in the course of using the Services (“Content”); however, Adobe needs certain rights to Content in order to provide the Services. Accordingly, you hereby grant to Adobe and its service providers and designees a worldwide, non-exclusive, transferable, sublicensable (through multiple tiers), royalty-free, perpetual, irrevocable right and license, without compensation to you: to use, reproduce, distribute, adapt (including without limitation edit, modify, translate, and reformat), create derivative works of, transmit, publicly display and publicly perform such Content, in any media now known or hereafter developed.
    please explain the ramification of these new terms
    Thank you,
    Lana

    Hi guys,
    Correct as Liam noted there are various topics on these concerns. 
    However if still having issues/concerns I would suggest posting in the original thread below after reviewing Magda's response.
    - http://forums.adobe.com/message/4353638
    Kind regards,
    -Sidney

  • How do i output CMY reg marks over BLK master reg mark without the BLK being knocked out on BLK film

    how do i output CMY reg marks only CMY films where they are over the BLK master reg mark without the BLK being knocked out on BLK film

    You're evidently doing some kind of custom registration, but not explaining what it is.
    First, what kind of printing are you doing that requires ten seps (CMYK and six spots)?
    By definition, the Registration Swatch prints solid on all seps, both process and spot. But you talk of a CMY registration mark as if it is distinct and separate from K. Don't you also want your CMY seps to be registered not only to each other but also to the K?
    You mention a "master" registration (as opposed to…?) needing to appear on the K sep. If a registration mark only appears on a single sep, what is it going to serve to register to; and how if there is no corresponding mark on the other sep(s)?
    You seem to be under a not uncommon misconception that separations are somehow associated with Layers. They're not, unless you just want to organize your drawing that way for some reason.
    If you want to create your own registration or fold or other printer marks which separate only to specific process inks, simply create and assign Swatches defined with 100% values of the desired component inks. There is no need to set these marks to overprint.
    If you want to create your own marks which separate only to specific spot inks, those will need to involve object-level overprinting. You do not have to do that using multiple objects. You can assign multiple Strokes to a single path and set the overprint attribute on the Strokes individually.
    It almost sounds like you are designing for screen printing on garments, and want to use registration marks. But because there is no "trim" region on the garment, you are trying to build the files in such a way that the marks end up being overprinted (therefore hidden) by subsequent inks. The default assumption in forums like this is always commercial offset printing. Otherwise, you should always state the printing method for which you are designing and describe the pertinent parameters.
    Edit:
    >"... this is a silk screen process with each colour applied over the other..."
    We were typing at the same time. So it's as I suspected (or similar). Your description of what the printer wants is still confusing.
    JET

  • Please explain the magic! (Question)

    The ActionScript snippet below is from the BlaseDS chat sample app. Can someone please explain the magic that declares the chatMessage property of AsyncMessage.body (IMessage.body?) object? It's not in the docs anywhere so I'm guessing it is not built into AsyncMessage. And it's not defined in any of the sample app source files.
    Coming from a strongly-typed development world, seeing a property that apparently has no declaration and is not explicitly instantiated does not pass the sniff-test.
    Thanks.
    <mx:Script>
      <![CDATA[
       import mx.messaging.messages.AsyncMessage;
       import mx.messaging.messages.IMessage;
       private function send():void
        var message:IMessage = new AsyncMessage();
        message.body.chatMessage = msg.text;
        producer.send(message);
        msg.text = "";
       private function messageHandler(message:IMessage):void
        log.text += message.body.chatMessage + "\n";
      ]]>

    Hold your nose, because that is the dynamic "feature" of Actionscript.  Pretty much every class derives from Object (http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/Object.html) which is a dictionary of key-value property pairs.  The {"chatMessage", msg.text as Object} pair is created upon assignment.
    I am fairly new to Flex/AS, and while not having to declare types is convenient for quick and dirty coding, I try to avoid it in production code...I have been bitten by refactoring a class and not catching all the places where it was referenced dynamically.  I'm sure there are comprehensive pro and con arguments out there.

  • Please explain the use of all the below movt types

    Hi friends,
    Can you Please explain the use of all the below movt types and how it is triggered.
    901     GR Area for Production
    902     GR Area External Rcpts
    904     Returns
    910     GI Area General
    911     GI Area for Cost Center
    912     GI Area Customer Order
    913     GI Area - Fixed Assets
    914     GI Area Production Orders
    915     Fixed Bin Picking Area
    916     Shipping Area Deliveries
    917     Quality Assurance
    920     Stock Transfers (Plant)
    921     Stock Transfers (StLoc)
    922     Posting Change Area
    980     R/3 --> R/2 cumulative
    998     Init.entry of stock bal.
    999     Differences
    Regards,
    Balu R.V

    Hi,
    The below mentioned objects are interim storage types, not movement types.
    Interim storage types are used as a sort of bridge between IM and WM.
    MZ

  • Can any please explain the integration business process between PS and CS

    Dear Guru's
    Can any please explain the integration business process between Project systems (PS) and customer service (CS).
    Business Process: We do machinery Erection or commissioning, later we do provide service warranty for one year.
    How we map this Business scenario in sap.
    Regards,
    Bhanu

    basic steps for such a process would be
    1) Use PS functionality for your machinery erection or commisioning work. Once the physical work is completed then close porject
    2) Use CS functionality for warranty and service - set up the work as a functional location on customer site (PM/CS functionality)
    3) Use service order to manage any service calls on the object which could require billing via SD module - bill value may be zero if under warranty

  • Can I homeshare my music with somebody not on my home network by providing my applied and password in the setup for homesharing

    can I homeshare my music with somebody not on my home network by providing my applied and password in the setup for homesharing

    Yes, you can install and use the software on the 2nd machine so long your new company owns the license, the software is used but the same person who is using the primary installation (that is, you).

  • Have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me.

    I have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me
    I see only photoshop elements 13
    Thanks

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..

    Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..

    iOS: Forgot passcode or device disabled - Apple Support

  • In po,every time i want to add the message for print out.

    in po,every time i want to add the message for print out.
    is there any permanent solution for above issues ?

    Hi,
    1) use transaction nace
    2)Select application EF  and go to condition records
    3) o/p type is neu , select the same and double click on it .
    4) select paricular condition table.
    5) maintain condition records , means for particular combination NEU should appear automatically in PO print.

Maybe you are looking for