EREC - SAP When an external candidate registers - default email

Hello All,
When an external candidate registers on E Recruitment does a default email go to his email id with the user id & password.
Please let me know if any standard workflow is avaiable?
Regards,
Poornima

Hi Paul,
this workflow is just triggered, when the candidate registers in Pool without applying. In this case he can define user and password himself.
A user and password in an e-mail is just required if you apply from job search. Till EhP4 you cannot define user and password yourself and an e-mail is needed. For that purpose no workflow is available in standard.
best regards
Sebastian

Similar Messages

  • "Central system not accessible" when registering external candidate !!

    Hi,
    When registering an external candidate via candidate registration link we get an error as " Central system niet bereikt ( This is translation of "Central system does not reach " in Dutch language ). This issue is for only ONE language NL (Dutch) and working fine for other languages.
    The SICF service HRRCF_CAND_REG is displayed correctly in all languages . But when an external candidate goes to register itself, he gets such an error message. The recent installation of Dutch language was done correclty.
    Please help ,as what could be the possible reason.
    Thanks
    Shubham

    Hi Shubham,
    Did you add Dutch language in this parameter zcsa/installed_languages in RZ10 ?
    Thanks
    Sunny

  • EREC- External Candidate Registeration Scenario Confussion

    Hi Experts,
    I have a query with regards to those candidates who have not registered in the system. i.e. these candidates doesnt have any user name and password. But their profile exists in the system because agancies or recruiter have entered their profile using "create external candidate".
    Now my query is, if suppose these candidates tries to apply for a new posting, the system would ask for username and password. Also these candidates won't be able to register themself because their profile is already present in the system. So how would there candidates apply for a new job posting in future? have i missed out on any serv
    Regards,
    Kishore

    Hi,
    the other answers are not completely right.
    If a candidate registers within the system without applying, a confirmation of registration is sent.
    If a recruiter types in a paper application into the system this correspondence is not created within standard workflows, because the workflow exits if the candidate has an application.
    Now you have three possibilities:
    1. Include user name and password into your confirmation of application you send after typing the candidate in.
    2. Create a second workflow yourself, which sends out the password after entering a paper application.
    3. Change the texts within the candidate front-end and ask the candidates to request a new password via the password forgotten functionality.
    Best regards
    Sebastian

  • TIME_OUT in SAP when accessing external Oracle table thru native SQL

    Hi,
    I have a problem in one of my native SQL statement. It takes a long time accessing the table considering that the number of records to be retrieved is only small.
    Something happened on the Oracle system. But, stilll to be confirmed. Before, there wasn't any issue. Looking further, I found that when the value in the where clause equated is a literal (meaning the value is not declared in DATA or CONSTANTS in the ABAP Program)
    Example
    1.
    EXEC.
    WHERE FIELD = '1'
    ENDEXEC.
    instead of
    2.
    CONSTANTS: c_1 value '1'.
    EXEC.
    WHERE FIELD = c_1
    ENDEXEC.
    i found that when the way of coding is same as Example 1, a time-out error occurs. But when in Example 2, no issue.
    Can someone explain this? is their something that could affect SAP with respect to Oracle configuration?
    Thanks!

    I wonder if you could share the outline of your code to access an external oracle database.   I've just been given the assignment to do just that, but don't know where to start.
    thx,
    Mike DeGuire

  • Trying to import email files but Thunderbird doesn't show any "import from" choices when Outlook 2007 is my default email program

    Have installed, uninstalled and reinstalled Thunderbird, no change. Am going by the how-to article that says "In order to import messages from Outlook to Thunderbird, Outlook must be the default mail client."
    After all this, I will have to move the files from a Windows 7 machine to a new Windows 8 machine which will not have any Office programs on it.

    https://support.mozilla.org/en-US/questions/1031812

  • Why does Mail open when it is not my default email client?

    I prefer Thunderbird as my mail client and it is set to be my default.  However, if I click to send a picture by email, not only does it open up in the TB mail message, OSX Mail also opens along with an empty draft mail message.  How do I stop this?  I have turned off Mail. 

    Thanks, John.  That is how I already set TB as my default client.  I thought I had solved the issue of OSX Mail opening in tandem, but in fact it still does it.  Very odd.

  • Identification of eRecruiting External Candidate "userids"

    When an external candidate registers in eRecruiting, an SAP user is created. Does anyone know if there is a way to identify these users ? Ideally I would like to prefix the usercode with an underscore (or something) or be able to allocate a "user group for authorization check". My is reason is this.... we replicate our SAP users to our LDAP, which is then used by the portal and various security products for authorization, and do not want the external candidates to be potentially available for login !!
    Any ideas would be much appreciated.
    Regards
    Jack.

    Hi Sandy,
    You can use configuration node Store Legal Periods to acheive this.
    SAP E-Recruiting> Basic Settings> Store Legal Periods
    I am not sure about the mailing part, but it does use workflow WS51900005, so you could copy and tweek it to suit your requirement if needed.
    Regards,
    Priya.

  • External Candidate Registration - ERecruitment

    Hi Team,
    We have an issue in External Candidate registration process. After, the external candidate registration got completed, the user id to be created in the backend is not happening.
    Thus, the candidate is not able to login with the user id he has provided while registration.
    But the details are available in the Talent Pool regarding the candidate.
    Please through some light on how system actually creates an User in the backend when an external candidate registers.
    Thanks in Advance.
    Sadhar

    Hi Siddharth,
    I am also having an issue in case of external candidate registration and application.
    We are also implementing E-Rec as standalone server. We have not yet integrated with 3rd party system. But our client wants integration with their company careers site. Before that I was trying to test the WD services through SICF.
    As you mentioned above, I have done with the Service User creation and assigned the role for unregistered candidate also. Still i am facing the below error.
    When i try testing the Candidate registration page I am getting the following error i am getting an Internal error in function module HRRCF_MDL_AWZD_IS_APPL_GROUP
    When I tried testing the Application wizard, the system is throwing the following errors:
    * Internal error in function module HRRCF_MDL_AWZD_IS_APPL_GROUP
    * Internal error in function module HRRCF_MDL_AWZD_POSTHEADER_GET
    * HRRCF_MDL_AWZD_POSTHEADER_GET does not exist
    The publication period is over. You can no longer apply.
    Can you please look into this and help me on this.
    It would be great pleasure if you give me some inputs.
    Thank you.
    Sekhar.

  • E-Rec 6.04 Incorrect status of external candidate user password.

    Hi,
    We are on E-Rec 604 with seperated standalone e-rec system.
    I have a problem with the password of external candidates. When an external candidate is registered in the application, introduce user and password and all mandatory fields and all work ok. He can enter in his profile, introduce all fields, apply offers, etcu2026
    But when he log off and try to access again, the password is incorrect. If the external candidate Request a new password all works ok and when introduce this one and change this initial password, this new one let him to access in the future login in the correct  way.
    I realized that this is because the USER in R3 of the external candidate is cretaed with the field Password Status set to Initial password (set by administrator) and I think it is wrong, the status must be Product. Password. Instead, when request new password and set the new one the field status is Product. Password., the correct statusu2026
    I´m very confused I don´t know what can I did wrong.
    The type of the user is Dialog and the user that create all the external candidates user is the WF-BATCH my workflow useru2026 I think perhaps this is the reasonu2026 This is the correct user to create the external users?. Perhaps.. I set the assigned agent bad in any Workflowu2026?
    Somebody could guide me, please?.
    Best Regards,
    Esther

    Hi,
    it seems you have a workflow in background sending out a smartforms based email after registration.
    This smartforms seems to have a password generation mechanism, which overwrites the password of the user with a new initial one.
    Please check that.
    Best regards
    Sebastian

  • E-recruiting status of a external candidate data

    Hi experts,
    I have a question about status of an external candidate data. Here I have a situation where the customer I'm working for asked that whenever a external candidate create data (a CV) via e-recruiting, the information should be available to recruiters and only be blocked if the candidate perform a step to block data. Today the standard does the opposite, when an external candidate creates data, this data remais blocked until the candidate unblocks it via a step in E-recruiting.
    Is there any possible way to change that via customize or I'll have to create an enhancement?
    Thanks in advance for your time!
    best wishes,
    Thais

    Hi Sally
    Apologies for the late resonse, we have applied the note and system is generating another error. Please see the details below:
    When a Recruiter creating the external candidate and on saving the data system is generating the following error.  We are using the EP5 system.
    u201CThe client xxxx doesnu2019t contain an active application areau201D.
    Thanks in advance.

  • Default email client issue using thunderbird to share documents

    Get an error message when using Thunderbird as a default email client. Works fine is Mac Email client is the designated default.

    Hi Eb@Lot84,
    Please let me know what exactly is the error that comes.
    Regards,
    Anubha

  • EREC:Authorization issue in Registration of External Candidate

    Dear All
    We are on EhP 5 and NW 7.3 system with SAP Erec 605 addon.We have a single instance architecture.Need help with user assignment to various WDA ERec services.
    Also whenever i click on register now link in External Candidate Start page ,it asks for SAP backend authorization. In my view this should not happen.
    Please assist.
    Regards

    Hi Shankar,
    Even i'd gone thru tough time to complete the eRec config successfully...!
    You only need the reference user as logon data, as this is for the external service and there won't be any login expected by the External Candidate to the SAP system. When you assign the reference/service users to ICF services.. it means you are saying to SAP system that .. when ever this service is called use the authentication provided in the logon data and the rest is taken care by SAP!
    This is one URL from eREC which will be exposed to internet (via a reverse proxy) and shouldn't be asking for SAP authentication.
    You can use all the standard roles for eRec config, until unless you really have a custom scenario.
    Thanks,
    MS

  • EREC: Internal Error while logging in using Registered External Candidate

    Hi,
    We are on ECC 6.0 EHP 5 & ERECRUIT 605 (0005) and EP 7.0 SP22.
    I'm on the final stages of config on Production system for eRec applications, all works fine and ready for LIVE except the below functionality:
    1. i've registered 2 uses as external candidates using the external url
    2. when trying to login with that user, it throws internal error - this kind of issue didn't happen in DEV/QAS.
    when i've checked the SLG1 below came:
    Serious error; see log
    The error occurred in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56
    The user is not assigned a candidate or an employee
    The error occurred in program CL_HRRCF_START_A==============CM007 line 19
    The user is not assigned a candidate or an employee - this message didn't make me any sense as its the external candidate who is logging into the system.
    Then i've checked that user by running the HRALXSYNC >User: 455DC84C411 > F8. This gave me below errors:
    Determination of connections to object 'CP' of 'US' '455DC84C411' failed
    User 455DC84C411 is not integrated in the organizational model
    This kind of issue didn't repeated while I was configuring the DEV and QAS system, why i'm getting this only in PRD?
    Awaiting for valuable inputs.
    Thanks,
    MS

    Hi,
    I do not really understand what you expect from report HRALXSYNC. This report has nothing to do with the external candidates.
    A common issue when things on the production system are not working like on dev / qs are insufficient authorization tests. So you should check the authorization trace for the sevice user wich is defined in the external alias for the external candidate registration ICF service. Furthermore checking the NA, CP, BP, US objects and the relations between them can help analyse authorization problems on the object creation.
    Rgds.
    Roman

  • EREC: theme for Web Dynpro ABAP pages (external candidate)

    Hello,
    I have created a custom theme in the SAP Netweaver Portal for my customer and now I have the requirement to use the same theme for my stand-alone Web Dynpro ABAP applications (pages for the external candidate). Is it possible to use the same stylesheet as in the portal, without having to recreate a theme?
    I tried several options, but none of them did work:
    A. Downloading the portal theme as a ZIP file and then uploading it in ERP using the report BSP_UPDATE_MIMEREPOS (after unzipping) to a location /SAP/PUBLIC/BC/UR/nw5/themes/CUSTOM_THEME. After that, I call my application with the additional URL parameter sap-wd-themeroot=/SAP/PUBLIC/BC/UR/nw5/themes/CUSTOM_THEME but it does not work (the app is displayed with the default sap_tradeshow stylesheet)
    B. I also tried calling my app using the URL parameter sap-cssurl=/SAP/PUBLIC/BC/UR/nw5/themes/CUSTOM_THEME but here again, it does not work (the app is displayed with the default sap_tradeshow stylesheet)
    C. Downloading the portal theme as a ZIP file and then uploading it (zipped) using the report WD_THEMES, but here I receive the error "no themes found in the ZIP file". I have the same error if I upload only the ur.zip I receive from the portal (instead of uploading the whole *.zip file)
    I checked the UR versions both in portal & ERP, and we had a lower version in the portal than in the ERP, so we upgraded the portal version according to SAP note 1446099. Now we have a higher version in the portal than in the ERP. We regenrated the portal theme and downloaded it again, but with the same result.
    Does anyone have an idea what could be the solution to our problem?
    Thanks in advance!

    I would recommend to try another way. If it is possible to access any SAP Portal from outside you can use two URL Parameters to integrate the Portal style sheets in a standalone WDA application. The parameter sap-cssurl contains the absolute URL address to the style sheet and parameter sap-cssversion the current SAP Portal style sheet version. For all external facing scenarios it is important to use the whitelist mechanism to block unknown URLs.
    Example
    ?sap-cssurl=http://myportal.myserver.com:50000/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/mytheme/ur/ur_ie6.css
    &sap-cssversion=7.11.5.20.0
    I canu2019t recommend to raise manually the version number. You will not get an consistent system this way. The meta data (project.zip) are outdated and of course you will get an outdated theme.

  • E-Recruiting u2013 Internal Error when registered as external candidate

    When try to register as external candidate got an internal error page. In SLG1 showed error as u2018Could not determine recipients for message type HRMD_Bu2019
    u2018The error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM005u2019.
    Any suggestion on this will be great help. Thanks.

    Dear Morin,
    We have got the same message while running program for creating candidate for Erecruitment.
    I::000
    I::000
    Candidate 50570305 does not exist
    Could not determine recipients for message type HRMD_B
    This is the error message when i execute the program  "RCF_CREATE_USER".
    we were using this program,to create the CP,NA,BP objects for the employee.
    Can i have ur inputs for the same.
    Regards,
    Pullela.
    Edited by: UV SAP on Jun 13, 2011 8:46 PM

Maybe you are looking for