EREC: search for branches

hi
I have logged via RECRUITER role. Now I want to create my requisition and want add for it branch.In seacrh criteria i have selected my Company. Clicked to "Start Search" but nothing. I use IDES now. how can I assign company to my other companies? I am new in EREC. anyone can help me?
regards,
Samir

Hi Samir.
I have the same problem. During my individual searching of solution i found two thing.
First we can create branch via Administrator -> Maintain brances for selected Company.
the second under IMG->SAP E-Recruiting->Basic Settings->Enterprise Structure->Define and Assign Branches to Companies
First create the branches , Second assign them to the Company.
Regards
Garayev

Similar Messages

Searching for Network / SIM card blocked - help please!!

I have just purchased an 8700c from a reputable eBay seller from whom I have previously purchased other items.
The 8700c was advertised as Unlocked without a SIM card.
I have never owned a Blackberry before and am just getting familiar with it.
When I click icon to 'Turn Wireless On' and press the Phone key then at top of screen displays "Searching for Network".
After a minute or so displays "No Service".
I bought the 8700c because one day my previous mobile phone did exactly the same thing.
After an hour on my landline phone with the phone company they assured me the GSM network was functional in my area and suggested my old phone was faulty.
Not knowing if the phone itself had just died or if fault was with the SIM card I took it to the local branch of the telco.
One of the guys there swapped his SIM card into my phone and had same problem - hence phone faulty.
Thinking about it later I realised that it didn't prove there wasn't also a problem with my SIM card but I thought it unlikely so decided to buy a new phone.
Anyway, received the 8700c yesterday and have inserted my old SIM card, been reading manual, etc.
Whilst learning how to use it I've been asked several times to enter a password.
Assuming this was the PIN/password I had on my old phone to prevent use in case I lost the phone, I entered it and it was accepted without any error/warning.
So I thought I was right in believing the PIN/password was stored on the SIM and not another code, maybe in some EPROM memory in the old phone - I'm not so sure now.
Doing a Google search I've found mention of various PIN/PIN2/PUK/PUK2 codes used in mobile phones which, if not used correctly, can cause the phone to be locked permanently.
Here's current information I've found on the 8700c:
click icon Settings / Options / Status shows
      PIN:      {8 alphanumeric code}
      IMEI:     { 6 digits .00. 6 digits .5}      i.e 15 digits and 3 periods
click icon Settings / Options / Advanced Options / SIM Card shows
      SIM Card: Blocked
      ID:     {20 digit number}
click icon Phone shows
      My Number: Unknown
click again to see list of items, scroll down to Options
click again to see list of items headed Phone Options
click on General Options
the 'Show "My Number":' line has value Yes
click icon Settings / Options / Network shows
      Network: * None *
      Network Selection Mode: Automatic
click again to see list of items, scroll to My Preferred Network List
click again to see one item which is GSM network associated with my old phone
So it seems this has been found from the SIM card.
The top left hand side of screen shows 'cingular' but I think I read somewhere that this was just the network for which the 8700c was originally issued and doesn't detemine whether the 8700c is currently locked/unlocked.
Is 'My Number' Unknown because the SIM card is Blocked?
Is the SIM card Blocked because I entered my old PIN password instead of the Settings / Options / Status alphanumeric code PIN or some other PIN?
How can I determine if the 8700c is really unlocked?
Are there some other settings/options or anything else I should do so I can get connected to the network?
Any thoughts would be very welcome.

I am having exactly the same problem mate. Never used a Blackberry - received mine today from eBay (Didn't include a manual) and i have been trying to configure it with no luck. I can't connect to a Network/My SIM Card is blocked/My number is unknown - Even though my SIM works perfectly in my Sony Ericsson. Have no idea what to do. Any help would be appreciated.

Searching for a good file manager

I'm searching for a good file manager. Konqueror 3.5 is quite good, dolphin 4.1 and konqueror 4.1 are not. Since konqueror 3.5 is going to die due to lack of support in the future, I kind of need to find a new good file manager...
Do there exist file managers with the following features?
Many of these features are things I thought were quite logical to be in a file manager, but seem to be missing in most "modern" ones...
-independent of any desktop (gnome or KDE), just a standalone program
-preferably not being both a web browser and file manager in once, at least not in an annoying way. Konqueror 3.5 shows that being that combination is possible without being annoying.
-ability to have a tree view of the folders on one side and list view showing the files and subfolders of the folder currently selected in the tree on the other side
-detailed list view showing at least filename, type, date and size, and the ability to sort according to any of these properties
-a non-detailed view showing image contents would also be nice, to browse folders of photos or other images
-ability to open files in certain programs if you doubleclick the file, NOT open it by singleclicking, singleclicking may only select it
-ability to select multiple files by dragging box around files or using keys like "ctrl" and "shift"
-ability to do "open terminal here" or type terminal commands in the current open directory
-must have ability to drag files from one folder to another, from list view to tree view and vica versa, to move or copy them
-and must have ability to use "ctrl+c" and "ctrl+v" to copy files and foldes from here to there
-multiple tabs is a huge plus
-favorites (to local folder paths) is also a huge plus
-preview of files when hovering the mouse over them is nice
-must have ability to zip and unzip (or other compression formats) folders by just right clicking them and choosing a zip/unzip command there
-in addition to that, must also have ability to browse through a zip file as you would through a normal directory, and drag files from the insides of the zip file to the tree view to automatically unzip those files there, and of course "ctrl+c"/"ctrl+v" should also work to copy a file from the inside of the zip file, to some other folder on your disk
-no horizontal autoscrolling in the tree view, that is an invention straight from the abyss...

I know exactly how you feel about KDE 4 vs. 3 -- Konqueror was the best part of KDE for me (pretty much the only part I ever used, actually; my window manager is a slightly modified version of WMII and I generally loathe "desktop environments"). KDE 4 ruined it, completely and utterly.
I submitted about 20 different bug reports about Konqeuror 4, mostly features that they'd deleted or mangled; some of them are starting to be addressed now. I don't think they'll ever fix the speed issues though, because those are dependent on the underlying KDE 4 libraries as far as I can tell -- it's as if KDE 4 were purposely and deliberately designed to be slower than KDE 3. Even if they fix all of its deficiencies, that'll probably keep me from using it...
Right now there's KDEmod, which will hopefully maintain its KDE 3 branch for a while longer. It's starting to show some problems, though; I haven't been able to get kdemod konqueror 3 to work fully out of the box (the settings pages are all blank). On my main machine, I somehow managed to hack together some of the KDEmod3 packages so that I have a functional konqueror 3 running alongside the Arch repository's version of KDE4. I'm afraid to pacman -Syu now, though, because it will probably break horribly :P
I don't remember exactly how I got konqueror 3 going like that, as I did it in my initial fit of rage after I did the pacman -Syu that got me KDE4 (a decision I have regretted ever since), but it was something like this:
1. move /opt to /opt.kde4
2. make a new /opt
3. download several KDE 3 packages from the KDEmod3 repositories manually
4. extract those packages into the new /opt with tar -xzf (NOT pacman!)
5. try /opt/kde/bin/konqueror
6. read reams of error messages about missing libraries, segfaults, etc.
7. try to supply the missing libraries by downloading other kdemod3 packages and manually extracting them
8. goto 5
Then, when everything worked (sort of), I renamed some stuff so that 'konqueror' is konqueror 4 (I think having it konqueror 3 broke something else, but I don't remember what), and konqueror 3 is called 'k3nqueror'.
If KDEmod3 ever goes away and there's no other good replacement file manager by then, I'll probably take the source code of KDE3 and try to make a standalone version of konqueror out of it. (Which will probably be quite a project because of how interdependent all the KDE components are.)
Some features I "need" in a file manager, besides the ones you mentioned:
- Konqueror's tree view (where you can expand folder branches in the file list)
- Infinite view splitting -- I frequently have my konqueror windows split into 4, sometimes as many as 6 or 7 view panes. Very useful for sorting out files.
- Selection rectangles are sensitive only over files -- I find full-row-select really annoying, because there are no guaranteed "blank" areas that you can click on to clear a selection. I also use this behaviour to grab long-named files that are interspersed with short ones, because they hilight first when the rectangle touches them (you wouldn't think this very useful, but surprisingly often you do want to do something to all the long-named files...)
- Right-clicking on a folder and clicking "Paste" pastes into that folder, not the current one -- you'd be amazed at how many file managers get this wrong. I shouldn't have to cd into a folder just to paste some files there.

Runtime errors for Branched in SXMB_MONI

Hi,
After PI 7.0 has been upgraded to SPS16, every time I try to display a message in status "Branched" from SXMB_MONI I get a runtime error. Also I got an error when trying to display it from RWB Monitor.
Messages in other statuses donu2019t have problems
Any suggestion why is that? Thanks.
Janos

Hi,
It is error Message_type_X, but I don't think it is a SAPGUI problem, since I got the same problem with SAPGUI 710 and SAPGUI 640
Bellow is the extract from ST22.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          22.09.2008 13:50:43
Short text
    The current application triggered a termination with a short dump.
Error analysis
    Short text of error message:
    Control Framework : Error processing control
    Long text of error message:
     Diagnosis
         An error occurred when the system tried to process the commands
         from the Automation Queue on the presentation server.
         There are several possible reasons for this:
         - The installation of the SAP GUI on the presentation server is
         faulty or obsolete.
         - There is an error in the application program
         - There is an error in the SAPGUI or an integrated control
     Procedure
         1. Make sure that you have imported the appropriate Support
         Package, the current kernel, and GUI patch for the release of your
         system
         2. Check whether the error occurs locally on one or a few PCs, or
         generally on all PCs. Note whether the error only occurs for some
         users, for example because of a specific Customizing setting.
         If it only occurs locally, this suggests an installation problem
         with the PC. Check the installation; if necessary, reinstall the
         software. In the dump, search for the SY-MSGLI field, since it may
         point to the cause of the error.
         3. Activate the Automation Trace (in accordance with SAP Note
         158985).
         4.Start the transaction and continue until the screen immediately
         before the dump.
         5. From the System -> Utilities menu, choose Autom. Queue,
         Synchronous Processing.
         The status bar of the GUI displays the text:
            "Automation synchron flush mode on"
         6. If you now proceed with the application, the short dump will
         display the ABAP call that caused the error; the Automation Trace
         will contain the error on the presentation server.
         7. If necessary, load the short dump and trace files on to
         sapservX, so that SAP can analyze them.
    Technical information about the message:
    Message class....... "CNDP"
    Number.............. 006
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLOLEA" or "LOLEAU02"
    "AC_SYSTEM_FLUSH"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Search Criteria - job search for candidate - TREX

I need to add branches field to selection criteria for job search function( candidate pages). in standard we have
functional area,hirarchy level,country,Work contract type,Education level.
i was able to add branches successful , but when i search which branches no results .
what i have to configure to get the excepted results.
thanks in advance

When add new elements to a search mask, via customizing, you need to add that specific field also to the search profile.
In a search mask, you have the infocategory and field stored. Assign those to the search profile you want to enhance. In case of a requisition it is ERC_REQ. In case of postings INT_POER and EXT_CAND.
After doing this, you need to recreate search profiles. After indexing you will find it.

Why does the App Store crash every time I search for something on my iPod?

Every time I open the App Store on my iPod touch and search for something, it crashes. I tried resetting my iPod, but the App Store still crashes. I used to love my iPod and was very happy to have supported Apple, but it just makes me angry more than anything now. Also, in the Tree World app, my hippo was deleted. I was moving my critters around on their branches when all of a sudden my hippo was carried off the screen never to be seen again. I can't buy it from the market. I am VERY upset over this.

I have the same bug cuz of the new App Store application ,,, almost the next update they ll fix it ,,
But really it isn't a big problem ,,, after AppStore crash open it again ,,, & install what u want ,,,
That's all

Search for a node in a tree

I have a standard APEX tree on a in the side bar region of a page. (using Oracle 10g APEX 3.1.0)
The tree displays and functions just fine. The initial display of the tree is the first 2 levels.
My users would like a search function of some sort that would expand the tree to only those levels that would match their search criteria.
For example if I had the following tree
Animals
|-Mammals
| |-Canines
| | |-Dogs
| | |-Wolves
| | |-Foxes
| |-Felines
| | |-Cats
| | |-Lions
| | |-Tigers
|-Birds
| |-Raptors
| |-Eagles
and so forth
and it was initially displayed
Animals
|-Mammals
|-Birds
|-Fish
and so forth
the user would like to search for Canines or Dogs or Raptors (only 1 criteria at a time) and have the tree expand to the proper branch/node.
I would provide a Search Tree button to initiate the search (refresh the page).
Anybody done this?
Bob

Hi Bob,
Here is an example were this is possible
http://www.oracle.com/technology/pub/articles/spendolini-tree.html
Kind regards,
Iloon

Programmatically search for a page via a property value

Hi,
I really need help with this, using java I need to search for a page via property value.
Thanks.

I don't know if this performs well, but this snippet traverses a branch with root "node", finds jcr:content nodes, and gets a specific child node. You could use the node.getproperty() method in your case and traverse the /content branch (or wherever your pages are stored). See the javax.jcr.node (http://www.day.com/maven/jsr170/javadocs/jcr-1.0/javax/jcr/Node.html). Also see org.apache.sling.jcr.api.SlingRepository (http://dev.day.com/docs/en/cq/current/javadoc/index.html)
NodeIterator iter = node.getNodes();
while (iter.hasNext()) {
        Node n = iter.nextNode();
       //Look for "jcr:content" nodes
       if (n.getName().equals("jcr:content")) {
               //get the path of the model node and save it
               if(n.hasNode(MODEL_NODE)){
                     modelIds.add(n.getNode(MODEL_NODE).getPath());
       } else{
       //Scan child nodes
       getModelIds(n);
scott

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. Any suggestions?

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility. Any suggestions?

Is the computer in you equipment line:
Dual Core Intel Xenon
(which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
If a Mac Pro, their forums are here:
Mac Pro
and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
If you really have a pre-2005 PowerMac, read on.
If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
Get a powered USB hub (has its own power brick
Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
The second gets power from two USB ports on the computer and often that's enough.
Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

While trying to install Creative cloud for my PC all i keep getting is Searching for Server

Searching for Server that is all i get when trying to install creative cloud on my pC and YES i am running Windows 7 and have high speed internet service. HELP

Sweetpea5154 you may be facing a connection error. Is the computer you are utilizing on a managed network? If not then please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve connection errors.

Windows 8 hangs or freezes whenever search for anything

Rebuild the Index
Whenever you try to search for something in windows, its indexing which find the things quickly and brings that to you.If indexing is disabled or corrupt computer won't be able to search and will not present the search results.Windows uses the index to perform very fast searches on your computer.
The index requires almost no maintenance. However, if the index can't find a file that you know exists in an indexed location, you might need to rebuild the index. Rebuilding the index can take several hours, and searches might be incomplete until the index is fully rebuilt.
Go to Control panel and open Indexing Options.
Click the Advanced button at the bottom of the Indexing Options window. This displays a new window titled Advanced Options.
Click the Index Settings tab if it isn’t selected already.
Click the Rebuild button to delete and rebuild the file index.
Click OK to confirm.
For more information on Advance indexing option you can read article on microsoft's website http://windows.microsoft.com/en-in/windows7/change-advanced-indexing-options
Step 2 will always fix this issue but just in case its not helpful try the next Step 3.
3.Check the Registry Value
Manual Fix 1
1. Press Windows Key + R to get the run dialogue box.
2. Type "regedit.exe" in the box and hit enter.
3. Using the box on the left, navigate to the following directory:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced
4. We need to change a registry called "Start_SearchFiles" to a value of 2. If you are like me, yours is already 2. We need to reset this so what we are going to do it change it to 0, then back to 2.
5. Double-click Start_SearchFiles or right-click and select "Modify" to get the edit box. Change the number under "Value data" to 0 then click "Ok".
6. Repeat step 5, changing the value back to 2.
7. Restart your computer.
Manual Fix 2
Using the above information navigate to the following directory: Read More on http://bookingtohosting.blogspot.com/2015/04/windows-8-hangs-or-freezes-whenever.html

Hi,
Regarding current information we can't say that it related to this exe file.
We need to use Clean boot mode and Safe mode to test the results:
Please first restart the Windows in Clean boot and see if the issue still persists after reboot:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
half services.
If the issue still persists in Clean boot mode, please test in Safe mode.
Let me know the results in Safe mode.
If we cannot identify this issue in Clean boot and safe mode, please help to collect the boot trace and let's see what cause this issue:
Windows Performance Toolkit: Simple Boot Logging
http://www.autoitconsulting.com/site/performance/windows-performance-toolkit-simple-boot-logging/
You can upload the etl file from this tool for our research.
Kate Li
TechNet Community Support

Iphone 5s - Calls Breaking Up - Searching for Network

Hello.
I recently started using my new Iphone 5s and I have a big problem.
Every call I get or make, the call suddenly breaks up during the first minute. My network reception bar drops to 1 bar, then says "searching..." briefly, and then it comes back. But the call is already gone. There are no problems when I remake the call. But I get this problem with every single call that I make. I've never had a problem with my Iphone 4 for 2 years, so I don't think it's about my carrier. Anyone else experiencing the same problem? Any suggestions?

I have the same problem. My phone keeps "Searching..." for network, and if I don't fix it, it can go on like that for days. I tried several solutions, Reset Network Settings, Reset All Settings, hard reset, and finally I restored my iphone to factory settings then re installed ios 8.1.3, which I had trouble doing because my phone took 4 days to finally have a successful restore. I am not sure if this is about updating to ios 8.1.3, but all of this happened to my iphone 5s a few days after updating. Anyway, after my phone had miraculously went thru with the restore, my phone was back to the way it was, but after 2 days, it went back to searching for network again whenever I get to an area with poor signal. I put phone in Airplane mode for about 10-20 mins, then turn off Airplane mode to check if signal is back. If it still doesnt, I reset network settings, then airplane mode again. I have not yet used reset all settings since my iPhone restore. I tried to google and see if this really is an ios problem or just my case, then I came across your question. The latest fix I did just this morning is I plugged my phone to my wall charger and tried to dial a number and pressing the green call button several times until the signal went back. That was by far the simplest solution I have discovered, but I still can't say if that IS the solution because it was just my first time to do it. I advise you not to restore your phone because in my case, mine took 4 days to until i was able to use my phone again since restoring wasn't working. You don't want to end up with a dead brick phone. With mine, I just kept trying until it went thru and I don't think I will be doing the restore all over again because of what happened. I hope this is just a problem with ios update and that apple will soon find a permanent fix to this.

My podcast has been accepted by apple and has been working on the itunes store for a few years until recently. If I search for it I can see some of the episodes but no matter which store I am in I am told I can't few the episodes in my current store

I have a podcast that has been submitted to itunes a few years back that has been working just fine. The person updating it broke it a few months back, I have fixed the error and reformatted it but the podcast still doesn't work. If I go in itunes and choose to open stream and connect to the podcast URL there, then it works just fine, but If I search for it in the itunes store (search: Jubilee Community Church) then a couple of the episodes show up (see The Art of Marriage by Stephen van Rhyn) but if I click on any of them it just tells me that my podcast is not available in the current store. But I submitted it from the UK store and it is not even available on that store. I have send numerous emails to Apple Support but they have been incredibly unhelpful. I hoped it would update overtime and start working again but its been a month and still nothing, I can't get hold of anyone technical from itunes support to reload my podcast or tell me whats wrong, I can't even resubmit my podcast because it's already been submitted and therefore won't allow me too. I've run out of options, any help would be appreciated!

A 4th gen iPod can not be upgraded to iOS 8. 7.0.2 is the high version it can run.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

In Pages document, how do I search for word and view its frequency and page numbers in a sidebar?

I have a long document and I want to be able to search for certain key words and phrases, and then see how many times they appear in the document and exactly where. How do I conduct this sort of search and viewing? In the past, in Pages and Word, I've been able to view my "finds" in a sidebar but I can't figure out how to activate that service anymore.
Thanks!

Here is a word frequency concordance Automator Service that works in both versions of Pages. It does not present a page number reference. It is by descending count, and alphabetically, within the repetitive counts as shown in the image here. In any document, you select the text to process, then Menu > Application Name > Services > Frequency. The Service will open TextEdit with the n-pages of scrollable results. It is 16 pt Helvetica Neue for legibility.
Here is the code:
on run {input, parameters}
     try
          set mySelection to input as text
          set formatted_result to concordance(mySelection)
          if formatted_result is not null then
               set textHeading to "Word Frequency List"
               tell application "TextEdit"
               activate
                     set NewDoc to make new document with properties {name:"Concordance"}
                     make new paragraph at beginning of text of NewDoc with data textHeading & return
                     make new paragraph at end of text of NewDoc with data formatted_result
                     tell text of NewDoc
                           set font to "Helvetica Neue"
                           set size to 16
                           set color of paragraph 1 to {0, 0, 65535}
                     end tell
                    end tell
          else
                    display dialog with title ¬
                     "No input selected" with icon stop ¬
                      giving up after 15
          end if
     on error errmsg number errnum
                display alert ¬
                           "AppleScript Error" message errmsg & "[" & errnum & "]" as critical ¬
                              giving up after 30
     end try
     return input
end run
on concordance(mySelection)
-- Use Ruby to count word frequency and alphabetically sort words
    set rb to ¬
    "selected = String.new\nfreqs = Hash.new(0)\nselected = ARGV.join(' ').gsub(/[,.]/, \"\")\n
     words = selected.split(/[^\\w-]+/)\nwords.each { |word| freqs[word] += 1 }\n
     freqs_sorted = freqs.sort do |a,b|\n\t
     a.last == b.last ? a.first <=> b.first : b.last <=> a.last\nend\n
     freqs_sorted.each { |k,v| printf \"[ %8s ]          %s\", v, k }"
    do shell script "/usr/bin/ruby -e " & rb's quoted form & space & mySelection's quoted form
end concordance
Launch /Applications/Automator and choose New Document, then click the Service icon, and then select the Choose button.
On the left, you will have a list of Libraries from which to choose workflow items. Find Library > Utilities. In the adjacent column, locate the Run Applescript workflow. Click on it, then drag and drop it in the large workflow window to your right.
At the top, you can select Service receives text in any application. Leave Output replaces selected text unchecked.
In your Run AppleScript workflow window, you will see AppleScript boilerplate. Click on it and press command+A, then backspace to delete this content. Copy and paste the above code into this Run AppleScript workflow window. Press the Run button in Automator's upper right corner. If (and it should) a TextEdit window pops up, you are good, and you want to press File > Save. A dialog box will pop-up where you can name your Service. I called my Frequency, you may wish to call it something else. Once you have save it, you can exit Automator. Services are deposited in yourlogin directory/Library/Services.
If you have a Pages document open with text, either select it, or command+a to select the entire document. Now, you select your Service via Pages > Services > Frequency. This will now pop-up a new TextEdit document with the results. If you want to save this new document, you must use option+File to Save as...

EREC: search for branches

Similar Messages

Maybe you are looking for