EREC- Standard table entries missing

Hi Experts,
We are in the process of implementing SAP E-recruitment EHP5. System has been set up. We have also activated the following  business functions
HCM_ERC_CI_1
HCM_ERC_CI_2
HCM_ERC_CI_3
HCM_ERC_CI_4
HCM_ERC_SES_1
HCM_MSS_ERC_CI_1
HCM_HIRE_INT_CI_1
HCM_ASR_CI_2
But i am not able to find any entries in any of the standard tables(t77rcf*). Say for e.g. i cannot find any standard activities in the table.
Is there anything else that needs to be done, so that all the standard entries are visible.
Do i need to copy all the tables from client 000??
Please guide me in rectifying this issue.
Regards,
Pradeep

Hi,
it depends on the settings for the client copy if customizing entries from client 000 are copied or not.
I general all entries in SAP customizing tables are examples and no "SAP standard". So in all of my projects I start from empty customizing tables for activities as I setup the system according to the customer requirements and do not care much for the SAP examples.
If you really want to have these sap examples as a starting point you can run report rhttcp77 for tables t77rcf* to copy the entries from client 000 to your working client.
kind regards
Roman

Similar Messages

  • Standard Table entries missing in E-RECRUIT System

    Hi,
    We are in the phase of E-Rec implementation. We have installed standalone E-recruit system (NW 7.4)
    We did client copy with SAP_CUST profile from 000 to 300, but some of the table were not reflected which we copied again.
    We run the report RHTTCP77 for tables t77rcf* and copied client dependent tables from 000 to overcome the issue for the missing tables in 300.
    But, still we have an issue with VV_T77SK_RCF as all entries are not updated, what is the way fwd?
    Shall we proceed with SAP_CUST or SAP_ALL during client copy if we need above entries?
    Can anyone please suggest what way we will follow to overcome the issue of missing tables?
    Regards,
    Khushboo Sahu

    Hi,
    Please use SAP_ALL and for step wise instruction please check the below thread -
    http://scn.sap.com/thread/121904

  • Table entries missed

    Hi,
    Some table entries were missed.
    How can we get the details and any solution to get the table entries again?
    Regards,
    Chandu

    Hi,
      Are you trying to say that the records got Deleted???
      If yes then, the basis team has to restore the SAP system to the point when the table entries were present.
      The risk here is the programs and configuration done after that point will get deleted.
    Regards,
    Vimal.

  • How to transport standard table entries

    Hi All,
    I want to transport SAP standard tables records from one server to another server in append mode. It is actually required for upgradation purpose.
    Can anybody please guide me in this regards ?
    Thanks in advance!!

    Hi Reddy,
    Thanks for your suggestion! but one problem I don't have the Transport Entries submenu enabled for all the SAP standard tables. Is it table specific ?. Please let me know how to enable this sub menu or is there any other generic method to attach the records of any SAP standard table in a TR.
    Thanks!

  • Standard table entries

    hi all
      i am having standard table J_1IPART2 . in this table i need to modify values of 4 fields with document number i.e with value of one field i need to modify values of 4 fields which already stored in database. can i have any ways to do it
              can i write a simple modify program in se38 to modify the values in database. is it work?  pls suggest me.
                                                       Kumar

    Hi Kumar,
    Yes you can write program to update the table directly and modify the entries for the specific document number, however this is not a recommended way as the database may become inconsistent with different entries maintained in different related tables.
    So before updating the table entries make sure the values you are updating are maintained in only this table and not anywhere else for the respective document number.
    regards.
    Vikas
    <b>Do reward useful  suggestions.</b>

  • A standard table is missing in ABAP dictionary

    We wane to use a standard program which uses a standard table(CCEE/FISISTGRD) .
    but when trying to execute this pgm , itrs going into dump..
    The error is CCEE/FISISTGRD doesnot exist in ABAP dictionary
    Edited by: deepti Gandham on Apr 24, 2009 9:58 AM

    Hi,
    deepti Gandham,
    I check with ECC 6.0  ,but your standard Table not there
    List of the table,
    /CCEE/FISI_DDVN    Slovenia VAT open period
    /CCEE/FISI_SET       Seting for print programs
    /CCEE/FISIFP_A       Forign Payments - account connection
    /CCEE/FISIFP_B       Forign Payments in/out
    /CCEE/FISIFP_C       Bank list
    /CCEE/FISIFP_HAL   Podatki za HALCOM
    /CCEE/FISIKOEF1    Coefficients for revaluation
    /CCEE/FISIMT940     Bank statement - MT 940 - convert referenc
    /CCEE/FISIOBR1      Povezava kupca z letno obr. mero za izraèu
    /CCEE/FISISTGRD   Reasons for Reversal enabling to change ta
    /CCEE/FISITAX        Convert Tax on sales
    /CCEE/FISIZDV       
    Regards,
    Ansari.

  • Table entries missing in table TJ05

    Hi Experts,
    I have search in SCN regarding below issue...but i havn't get any solution.
    Recently we upgrade to ECC EHP5 from 4.7,
    The values "ZIN1" in table "TJ05" is missing in  ECC 6.0. This value was available in 4.7 .
    How can Z1N1 value insert in the TJ05 table.
    above reason the "Non-updation of status in QM notification".(its effecting to Quality module.)
    need to be insert values through configuration or through a tcode in SPRO..
    i can't use this thru utilities->Table Contents->create entries in se11.
    I know that we can forcibly insert values while debugging
    if code = 'SHOW'.
    set titlebar 'TAB'
    elseif code = 'EDIT'.
    Please provide valuble suggestion.
    Thanks and Regards,
    Syfulla

    - Check also if records are missing in table TJ03.
    - The code start with a "Z" and should have been added by your company/customer (*),  so may have been erased by the upgrade (you know/remember the warning message like "Do not make any changes (SAP entry)" ignored by press ENTER
    Look at BS* transactions like BS12/BS13 or BS22/BS23.
    Regards,
    Raymond
    (*) Not found on a 4.6c, a 4.70 and an Ecc6 Ehp4 systems..)

  • Standard Table entry after EA-FIN activation

    Hi All
    after the activation of the business function EA-FIN (mandatory for the RE-FX) my guess was that the system  should automatically insert the standard entry on customizing table.
    In my case it doesn't happen.
    How can I resolve this problem?
    TIA
    Sarah
    Edited by: Sarah Soldi on Sep 24, 2009 10:44 AM

    Hi Sarah,
    sample customizing entries are only delivered in the delivery client. This is usually client 000. You have to transport them manually in your customizing client.
    There are two ways:
    1. login to client 000 and go through the customizing views of RE-FX and put the entries in a transport request
    2. login to customihzing client and go through the cusotmizing of RE-FX and compare it with client 000. There is a compare function in the customizing views: Utilities -> choose connection with client 000 -> mark the entries and copy them in your customizing client.
    I would recommend you the second way because you can adjust the customizing during copying it AND the adjusted data will be automatically saved in a transport request.
    Regards,
    Franz

  • 2011 New Form 941 Table entries missing

    Greetings,
    We have implemented note 1568184 but the new functionality appears in the existing 941 form.  The note says:  new forms are being released in the standard system - "The Form 941 Federal and Form 941-PR PDF layouts are being released in this Note, by means of the new forms HR_F_941_11 and HR_F941PR_11 respectively (available for release SAP ERP 6.0 and above).  We are on 6.04 and the new entries are not in the tables V_T5UX7 or V_T51T5 as indicated in the note.
    Has anyone else had this problem?  Or have input as to why the new forms are not listed in the tables as specified after applying the SYST and ZIP files?
    Thank you for your assistance.

    Great article. Thanks for the info, you made it easy to understand. BTW, if anyone needs to fill out IRS Form 941, I found a blank form here Fillable Online Form 941 (Rev. January 2014) Fax Email Print - PDFfiller. This site also has some tutorials on how to fill it out and a few related forms that you might find useful.

  • Table entry missing: plz help

    Hello friends
    While doing migo in subcontrating scenario, I getting an error msg that :
    Check Table 169P : Entry ATTS < company Code > does not exist.
    Please help immedietely.
    Full reward points
    Thanks and regard
    Inder

    Hi for this error
    goto SE11 and enter V_169p then click on display
    then again click on contents icon then u wil get the company code list first u search ur comapny code if it exits pls do changes according to ur requirement.
    if company code is not there click on chnage button and goto new entries enter ur comapny code as per as requirement.
    and save it
    then again do the trasaction
    reward points if it helps.
    thanks&regards
    veera.

  • I am receiveing error while creating Z table: Entry in table TAORA missing

    Hi Experts,
    I am receiving "Entry in table TAORA missing" while creating Z table.
    Please help
    Edited by: N_niki on Jun 11, 2011 9:22 AM

    Hi
    1) Check for the DB System. The Table name in  "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
    2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
    Regards
    Gopu

  • Transporting table entries present in standard SAP R/3 table u201CTMCEXCFZu201D.

    Hi All,
    We have a requirement where in we need to capture a table entry in transport request in R/3.
    The table "TMCEXCFZ" is a standard SAP R/3 table.
    The" transport entries" option under the "table entry" in menu bar is disabled in our case.
    Is there an alternative way to capture the table entries in the transport request?
    Thanks for your help in advance.
    Thanks and Regards
    Arun Ail

    Hi Arun
    Try to go to object changeability in the table....assign the table in a package.....then try to save this...it should ask for a transport...
    Hope this helps
    Cheers
    Chanda

  • Archiving Object - Entry missing in Customizing table for object Z*********

    Hello friends,
    We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
    "Entry missing in Customizing table for object Z******* "
    I have matched my object with few other archiving objects and things looks similar.
    Have you faced this kind of problem..
    thanks
    ashish

    Hi,
    I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
    But when i enter ZSCS_TRAFO, i get this error :
    Entry missing in Customizing table for object ZSCS_TRAFO
    Message no. BA057
    Diagnosis
    A function cannot be executed due to a missing table entry.
    Procedure
    Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
    However, a few other Z objects works well.
    thanks
    ashish

  • Triggering event when entries inserted in standard table

    Hi Experts,
    I've a requirement to trigger an custom event when entries created in table TOA01 table. We can do this for Z-tables by through options available in table maintenance generator screen. But, in my case its standard table, so i cant change the table. And I dont want to use change document objects. Can you please let me know is there any other method to achieve this.
    Thanks in Advance,
    Siva Sankar.

    Have you checked that if there is a standard event triggered when an entry is done to this table? I think that there might be. If an event is triggered, you can for example create a check function module, and trigger your own event from there.
    Regards,
    Karri

  • Short dumop in J2I5 (provide duplicate entry in Standard table)

    Hello Expert ,
                              We have a problem in  T.Code J2I5  ( Excise Register Extraction) input entry is lelect Excise group 20 . and a date   from 04.08.09 onwards. and select the register RG23D . it shows the run time error  ( Eg The ABAP/4 Open SQL array insert results in duplicate database record ) .  but in the standard Tcode is there possible to provide duplicate entry in Standard table
    Thaks & regards
    Aditya Kr Tripathi

    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Except.                CX_SY_OPEN_SQL_DB
    Date and Time          29.01.2010 10:57:09
    <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    problem occurs in this code :
       assign I_RG23D_TAB-I_RG23D_TYP to <x_rg23dtyp> casting.
       <x_extrctdata> = <x_rg23dtyp>.
        class CL_ABAP_CONTAINER_UTILITIES definition load.
        call method CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
          EXPORTING
            IM_VALUE               = i_rg23d_tab-i_rg23d_typ
          IMPORTING
            EX_CONTAINER           = i_report_tab-extrctdata
          EXCEPTIONS
            ILLEGAL_PARAMETER_TYPE = 1
            others                 = 2.
       I_REPORT_TAB-EXTRCTDATA = I_RG23D_TAB-I_RG23D_TYP.
        COMPUTE I_REPORT_TAB-EXTRCTLNGT = STRLEN( I_REPORT_TAB-EXTRCTDATA ).
        APPEND I_REPORT_TAB.
      ENDLOOP.
      IF M_EXTRACTED = 'X'.
        LOOP AT I_RG23D_KEY.
          DELETE
          FROM  J_2IEXTRCT
          WHERE BUDAT    = I_RG23D_KEY-BUDAT
          AND   SERIALNO = I_RG23D_KEY-SERIALNO
          AND   REGISTER = I_RG23D_KEY-REGISTER
          AND   EXGRP    = I_RG23D_KEY-EXGRP.
        ENDLOOP.
      ENDIF.
    Control table check here for data Extraction
      INSERT J_2IEXTRCT FROM TABLE I_REPORT_TAB.
    If the insertion of the extract table is successfull then the table
    for Extraction is Inserted
      IF SY-SUBRC EQ 0.
        PERFORM FILL_EXTDT USING C_RG23D M_EXTRACTED.
      ENDIF.
    ENDFORM.                                                    " RG23D
    *&      Form  RG23CPART1
    Purpose : RG23C Part I extraction logic
    FORM RG23CPART1.
      DATA: $PART1      TYPE PART1_TYP,
            $LINCNT     LIKE SY-LINCT,
            M_EXTRACTED VALUE '',
            $RC         LIKE SY-SUBRC.
    *********************************************************************************************8

Maybe you are looking for