EREC : Upgrading browser compatibility for SAP E-Recruiting

Hi
We are currently using E-Recruiting 603 Sp 2 (Netweaver 7), does anyone knows how to upgrade browser compatibility. Currently we are only supporting Internet Explorer and Firefox up to version 7.0 and 3.5 respectively. Does anyone how to upgrade the browser compatibility to includes the newer version of IE, Firefox, Chrome and Safari.
Expert please help.
Regards
Ridzuan

Hi Ridzuan,
We have exactly the same problem as we currently run eRecruitment on EHP3 (Netweaver 7.00).
With EHP3, SAP officially support IE and Firefox only. This doesn't help external job applicants who can be
applying using any web browser. In particular Mac users tend to use Safari as its the default browser. Its not at all
good customer service to have to tell job applicants to download and install Firefox just to be able to fill in a job application.
When we originally implemented, eRecruitment worked fine in Safari, but currently all the drop down lists, date pickers
and pop-up dialogs fail to render making it unusable. This is caused by a security restriction in WebKit (used by Safari and
Chrome) blocking frame navigation.
SAP officially support Safari as of EHP5 (which runs on Netweaver 7.02). If running via the portal you'd need Netweaver 7.2 portal or above for Safari support for the portal.
I also found a SAP Note 1642778 " which includes "Unified rendering: Support for Safari, Chrome browser", which is
relevant to EHP4 (Netweaver 7.01). Upgrading to EHP4 and above isn't a small step if you've done any significant customisation on the BSP Recruiter pages as these are replaced with new ABAP WebDynpro pages.
To date I haven't seen the unified rendering corrections back ported to Netweaver 7.00 even though they were for 7.01
and this isn't officially supported (as per the PAM as mentioned by Andy).
See https://service.sap.com/pam
Then look at the link in the middle of the page:
"Browser information for: SAP NETWEAVER 7.0, SAP EHP1 FOR SAP NETWEAVER 7.0 and SAP EHP2 FOR SAP NETWEAVER 7.0 "
This opens a PDF showing official support dependencies between browser versions and SAP versions and patch levels.
EHP3=Netweaver 7.00
EHP4=Netweaver 7 EHP1 (a.k.a. 7.01)
EHP5=Netweaver 7 EHP2 (a.k.a 7.02)
To see what patch level you're running log into the SAP GUI on the eRecruitment system, then select System->Status...
from the menu. Click the detail (maginifying glass icon on the right next to Component Version). Then look at the patch
level of the SAP_BASIS component. Compare this to the patch levels in the browser support PDF to see which versions
to upgrade to e.g. SP24 or higher for IE9 support.
We're currently patching our EHP3 system up to SP25 to help with IE9. Firefox 8 is working (as is Firefox 9 beta).
Sadly Safari and Chrome still aren't working and this is the latest patch level. SP26 is mentioned but not out yet.
Also check the browser roadmap on p17 of the browser support PDF. It makes clear they intend to support Safari and Chrome
going forward but no timescale is given.
George

Similar Messages

SAP System DB usage for SAP E-recruitment.

Hi experts,
We are in the process of implementting SAP E-recruitmetn 600 in an integrated scenario with SAP Ecc6.0.
We would like to know the consequences of using SAP system DataBase as storgare system for SAP E-REcruitment. If this is the case, all external and internal candidates CVs and otehr documents will store in SAP System DB.
We would like to konw,
1.) Will this collection of huge data ruins the preformance of SAP system?
2.) How to proceed with backup for E-recruitment if DB is SAP DB
3.) Work-around Document for the above process
4.) What are the impacts
5.) What are the possibilities to restore data from SAP DB to content server once Content server issue resolved?
Thanks & Regards,
Sudheer Kumar P.

Hi Sudheer,
Have you got answers to your questions? I am also stuck with the same questions. If you could help me with these I would be very thankful.
My email is [email protected]
Edited by: Manoj Chauhan on Jun 11, 2008 12:38 PM

Using SAP Content Server for SAP E-Recruitment

Hi SAP Experts,
We are presently implementing SAP E-Recruitment using BSP services, We are successfully runnig with Whole E-recruitng cycle when we use SAP system DB as storgae for External Candidtes' Documents.
But, Our Client wants to have SAP Content Server to store all documents uploaded by External/Internal Candidates becuase client is worrying that if SAP system DB holds such huge data base of Resumes, it may slow down the performance of SAP System.
So, We need inputs from you suggesting whether is it feasible to use SAP Content server for SAP E-Recruitment Implementation. SAP no where suggests to Content server. So, we are in deliema to go for content server or not. If it is feasible to use Content server, pls provide me proper links or documents for reference.
Please give your valuable inputs,
Thanks & Regards,
Sudheer Kumar P

Hi Sudheer,
We are considering the same option. We are concerned about performance after all these documents are uploaded too. Did you install a content server? How did it go and was it difficult to set up with e-rec?
Thanks
Shane

CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0

Hello,
What are the compatibility issues for EHP4 FOR SAP ERP 6.0 Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
Following are the System Details:
Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
Component: SAP_APPL
Release: 604
Support Pack: SAPKH60402
Level: 0002
Existing CRM 5.0
Component: BBPCRM
Release: 500
Support Pack: SAPKU50006
Level: 0006
Thanks,
AG
Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PM

Hi Amirsd,
You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
It would run in 7 phases including downtime phase.
Let me know if you have any queries. !!!!
Regards,
Shobhit Garg

EREC: What is new in SAP E-Recruitment 6.0 SP5, SP7 and SP8?

Hi
Does anyone know what are the features available or improved in SAP E-Recruitment 6.0 for Support Package 5,7 & 8?
Regards
Ridzuan
Edited by: Ridzuan Mohsin on Nov 18, 2011 9:30 AM

Hi Ridzuan,
as the named support packages are already years old is your question actually about e-recruiting 600 or do you mean the support packages for an enhancement package (like EhP 3 or EhP 4) for the e-recruiting application.
Rgds.
Roman

SQL Server 2005 Workgroup Edition compatibility for SAP B1 2005B

Hi Experts,
Please advise SQL Server 2005 Workgroup Edition can be used as the backend for SAP Business One 2005B.
Thanks,
Shakeel

Hi
Please go to:SAP service portal-product availability-supported platform-database platform
For 2005 B version we could get the following supportted information:
Microsoft?SQL Server 2005 SP2
- 32 Bit / 64 Bit (x64)
- Express (3), Workgroup (4), Standard & Enterprise Edition
Please read SAP Note 928839 on how to order SQL 2005 for upgrade purposes.
(3)SQL 2005 Express Edition is only supported with the SAP Business One Evaluation Versions and only in 32 Bit mode.
(4)SQL 2005 Workgroup Edition is only supported with Windows Small Business Server (SBS) 2003 and only in 32 Bit mode
For more detailed information regarding the supportted platform you could refer to the webpage from the above path.
Best Regards
Helen Sun
SAP Business One Forums Team

Data migration for SAP E-Recruiting

Hi all,
We are looking for a standard way to migrate data from a nun sap system into SAP E- Recruiting.
Is there any way for doing so?
Thanks,
Sharon

There is no standard way available for data migration in SAP for E-recruiting.
As it believes in the concept of creating new data and a new talent pool.
Regards,
Divya

Browser support for SAP Netweaver 7.3

Hi All,
Just wanted to know what all browsers are support by SAP Netweaver 7.3 bcoz its mentioning it supports all the major browsers but I could not find the versions of it as well as do we have to do some extra work to make it compatible with different browsers
Regards
JM

Hi John,
You can check the Product Availability Matrix for browser support at http://service.sap.com/pam
Regards,
Leo

Browser compatibility for Adobe AIR (browser-based version)

Hi there,
I'm using RoboHelp 10 to create the browser-based version of Adobe AIR. My understanding is that this version of AIR uses Flash for some of the navigation, such as the table of contents.
Can anyone else share their findings on which browsers and Flash plug-ins will reliably display the browser-based version of AIR? I've found that it displays fine on IE 8, but not IE 9, and not Google Chrome (version 23).
Any advice would be appreciated.
Robert

Hi Peter,
I've spent more time looking at my project and I am not getting the results I need.
To summarize, I've created a browser-based version of Adobe AIR that is a local copy. It runs fine on IE 8, but not Google Chrome (version 23) or IE 9. I've also tried created a very small second RoboHelp project and I get the same results--the index.htm page is blank in Chrome and IE 9.
In Chrome, I've double-checked that it is running Flash version 11.5.31.5. I've noticed that Chrome changes my file path (see attached screen capture).
I'm at a loss to figure out why this is not displaying, as expected.
Any suggestions would be much appreciated.
Robert

Many Patch/Upgrade Questions/Processes for SAP Systems

Hello, I am trying to wrap my head around the patching/update process in SAP. I am familiar with how to use SPAM and SAINT, but my questions are more about the process as a whole. Here are some of my concerns:
- Do you update the OS or SAP first?
- Do you just apply only OS Service Packs or do you do all security patches as well?
- Should kernel updates be done before or after database patches?
- How do I update the kernel on a cluster?
- Should you go to the latest database patches available or go to a certain level?
- Are some areas more important to update then others?
- How are all of our customizations (1000+ in ERP) handled by the patches?
- What if we implemented an OSS Note that is fixed in a support patch?
- How do we test to ensure we are not doing damage?
- Can you uninstall security patches?
- Is there a way to know what t-codes are affected by the updates?
Just for reference, we are running an ECC 6.0 system on Windows 2003 x64 servers, with a MS SQL 2005 db. Our Prod environment is running in high-availability via MS clustering services. Your input on these questions is appreciated.

Hello Techies,
I am new to SAP and have done course in SAP-BASIS MODULE.
I would like to know the major tasks to be done by basis admin daily,weekly,monthly and how and when to do those tasks???
Please help me out...i am in a desperate need of it..
please mail me on
my email id <removed by moderator>
Thanks & Regards,
Ayaz

MOPZ error while generating stack file for EREC upgrade

I need to upgrade E-Recruitment 604 to 606.
Currently we are on Netweaver 7.01 While adding this system in SOLMAN 7.1 SPS 05 in order to generate
stack.xml file i manually selected this product system in product system
editor and we had selected below combinations
1)EHP4 for SAP ERP 6.0/NW 7.01(marked as installed) + SAP ERP
-> started MOPZ with same and selected target as SAP ERP 6 EHP 7 but
while doing so got error as Invalid queue because EA_APPL is not selected
but actually EA_APPL is not in components for EREC system
2)EHP4 for SAP ERP 6 with ABAP technology and E RECRUITING + EHP1 for
NW 7.0
->started MOPZ with target as SAP netweaver 7.4 but while doing so
getting error as "EHP Component ERECRUIT 604 without suitable Technical Usage!"
and Mark relevant instance to include the software component ERECRUIT
604 in SMSY/LMDB but Product system editor is perfect and verification tool is also green.
Please help
Warm Regards,
Sumit

Problem has been resolved.
SAP E-recruiting should be selected in SAP ERP 6.0 as a pre-requisite.
Warm Regards,
Sumit

Is there any tool in DW for chencking browser compatibility ?

Hello all,
I have some doubts. When i develop one website in Dreamweaver, i can check the out put design into all the browser compatibility. But I need to know is any tools having to check browser compatibility for website.
Please reply to this thread,
Regards
Abdul
www.whitehouseit.com
www.ilearnsmart.com

http://my-debugbar.com/wiki/IETester/HomePage
http://ipinfo.info/netrenderer/
You could also look at those.
Martin

Know more detail about the Remote Support Platform for SAP Business One ?

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

Check on EHP2 and EHP5 Compatibility for Adobe Forms

Hi,
Does anyone knows if adobe forms for EHP2 and EHP5 is downward compatible?
Meaning, the standard SAP adobe forms I have in EHP2 can run as well in EHP5?
Or appreciate there is any info on the compatibility for sap adobe forms

Hi Sashu,
It should be downward Compatible .
Ranganathan

Connecting SAP E-Recruiting with SAP ERP HCM via PI 7.10

Hello guys,
i am currently working on connecting a SAP E-Recruiting and a SAP EPR 6.0 (HCM) via a SAP Netweaver PI 7.10 SP6 (Its a Proxy-to-Proxy Connection). For this i have created a more or less detailed How-to Wiki page. As i am not a PI/XI Expert at all - but i am always eager to learn I have some difficulties and i have hoped that you may help me out so i can complete the guide and so help others who also have some difficulties in setting up the scenario.
For what i have already done, please check out the Wiki page i have created.
One question i do have is, where can i monitore the send process.
I mean i am executing the proxy-call in the sender system (E-Recruiting) but nothing happens (no error message)
Also please take a look the RFC Destinations i have created for the Communication Channel. Not sure in which system i have to create those Destiantions and where they should point to.
Here is the Wiki (still working on layout issues)
https://wiki.sdn.sap.com/wiki/display/profile/HowtoConnectyourE-RecruitingwithyourHCMviaNetweaverPI+7.10
best regards,
Markus

Hi Li,
I am the Product Manager for SAP E-Recruiting. I'll try and give some direction.
SAP E-Recruiting uses no functionality from the existing SAP recruitment module, and has a new data model. For HR releases before ERP2004, SAP E-Recruiting can only be deployed on a separate instance to HR, and integrated using a combination of ALE (qualification catalogue, employees, organizational units, jobs, and positions) and RFC calls (for moving candidate to be hired into HR).
If you have ERP2004, then you can have E-Recruiting on the same instance as HR. There are advantages and disadvantages to this including, security, sizing, etc. We can discuss this if you consider this an option.
If you have E-Recruiting on a separate instance to ERP2004, then you can also display or use organizational data using supplied data extractors. These are great for easily pulling HR data. In the standard they are only used to display information based on the job/position (example: current position holder) but they could also be used in custom workflows, job postings, etc.
With ERP2005, employee qualifications will also be available in E-Recruiting, as well as the possibility of defaulting qualifications on the requisition, based upon the job or position.
I hope this helps. Please feel free to ask more questions.
Best wishes, Mark

EREC : Upgrading browser compatibility for SAP E-Recruiting

Similar Messages

Maybe you are looking for