Erecruit business contents in BW 3.5
I am challenged with a brand new BW 3.5 install where I am trying to install Erecruit (ODSs) business contents. I cannot find any documents on what is needed before I can use the business contents as well as what's included in the ODSs and the rest of business contents. Perhaps they share objects from other infoCubes that I do not have. This is a fresh installation of BW 3.5 and nothing else is installed. We have a fully functional ESS/Erecruit so it'd be nice to analyze that data into BW system. Thanks for any help or clues.
I have found some information on the details of queries that are included in erecruit business contents at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3ed09790-0201-0010-c28e-c639f87d40b9
The link is for a pdf document titled: SAP Business Information Warehouse 3.5 /BI Content 3.5.2 Add-On
Similar Messages
-
How to install/use business contents on Erecruit - in BW 3.5
I am challenged with a brand new BW 3.5 install where I am trying to install Erecruit (ODSs) business contents. I cannot find any documents on what is needed before I can use the business contents as well as what's included in the ODSs and the rest of business contents. Perhaps they share objects from other infoCubes that I do not have. This is a fresh installation of BW 3.5 and nothing else is installed. We have a fully functional ESS/Erecruit so it'd be nice to analyze that data into BW system. Thanks for any help or clues.
Bilal
Welcome to SDN
Please check the following links
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c5c43f82ab6d3fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/93/38c53f3e0f0228e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b1/c7bb3f039cf772e10000000a114084/frameset.htm
Hope this helps
Thnaks
Sat -
Hello!!
we are installing a IDES BW system for customer demos, training and so on.
I am tying to activate all HR Business Content, and I began activating Personnel Administration.
Every time that I am trying to activate HR Business Contentt objects, the following error message appears:
Err.tmpo.ejec. CALL_FUNCTION_CONFLICT_LENG
Excep. CX_SY_DYN_CALL_ILLEGAL_TYPE
Error in the ABAP Application Program
The current ABAP program "SAPLRSAOS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
A function module was called incorrectly.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "OSOA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The call to the function module "RSA1_OLTPSOURCE_GET_ALL" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "I_T_OLTPSOURCE".
Although the currently specified field
" " is the correct type, its length is incorrect.
We have installed the following components:
SAP Netweaver 2004s:
SAP_ABA 700 0015 SAPKA70015 Componente multiaplicaciones
SAP_BASIS 700 0015 SAPKB70015 Sistema Base SAP
PI_BASIS 2005_1_700 0015 SAPKIPYJ7F PI_BASIS 2005_1_700
SAP_BW 700 0017 SAPKW70017 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
SAP ECC6.0:
SAP_ABA 700 0015 SAPKA70015 Componente multiaplicaciones
SAP_BASIS 700 0015 SAPKB70015 Sistema Base SAP
ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution Tools Plug-In
PI_BASIS 2005_1_700 0015 SAPKIPYJ7F PI_BASIS 2005_1_700
SAP_BW 700 0017 SAPKW70017 SAP NetWeaver BI 7.0
SAP_AP 700 0012 SAPKNA7012 SAP Application Platform
LCAPPS 2005_700 0006 SAPKIBHD06 LC Applications (LCAPPS) 2005_700
SAP_APPL 600 0012 SAPKH60012 Logísitica y Finanzas
EA-IPPE 400 0012 SAPKGPID12 SAP iPPE
EA-APPL 600 0012 SAPKGPAD12 SAP R/3 Enterprise Extension PLM, SCM, Finanzas
EA-DFPS 600 0012 SAPKGPDD12 SAP R/3 Enterprise Extension Fuerzas de defensa y
EA-FINSERV 600 0012 SAPKGPFD12 SAP R/3 Enterprise Extension Financial Services
EA-GLTRADE 600 0012 SAPKGPGD12 SAP R/3 Enterprise Extension Global Trade
EA-HR 600 0028 SAPKGPHD28 SAP R/3 Enterprise Extension HR
EA-PS 600 0012 SAPKGPPD12 SAP R/3 Enterprise Extension Administración pública
EA-RETAIL 600 0012 SAPKGPRD12 SAP R/3 Enterprise Extension Retail
FINBASIS 600 0012 SAPK-60012INFINBASIS Fin. Basis
FI-CAX 600 0012 SAPK-60012INFICAX FI-CA Extended
INSURANCE 600 0012 SAPK-60012ININSURANC SAP Insurance
IS-CWM 600 0012 SAPK-60012INISCWM Industry Solution Catch Weight Management
IS-H 600 0013 SAPK-60013INISH SAP Healthcare
IS-M 600 0012 SAPK-60012INISM SAP MEDIA
IS-OIL 600 0011 SAPK-60011INISOIL IS-OIL
IS-PS-CA 600 0012 SAPK-60012INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT 600 0012 SAPK-60012INISUT SAP Utilities/Telecommunication
LSOFE 600 0012 SAPK-60012INLSOFE SAP Learning Solution Front-End
SEM-BW 600 0012 SAPKGS6012 SEM-BW: Strategic Enterprise Management
SLL-LEG 7.00 0006 SAPK-70006INSAPSLL SLL-LEG 700 : Add-On Supplement
WFMCORE 200 0012 SAPK-20012INWFMCORE WFMCORE 200 Upgrade: Meta-Commandfile (D
CPRXRPM 400 0012 SAPK-40012INCPRXRPM SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ECC-DIMP 600 0012 SAPK-60012INECCDIMP DIMP
ERECRUIT 600 0012 SAPK-60012INERECRUIT E-Recruiting
FI-CA 600 0012 SAPK-60012INFICA FI-CA
MRSS 600 0000 - Multi Resource Service Scheduling
ST-A/PI 01G_ECC600 0000 - Application Servicetools for ECC 600
AIN 400 0005 SAPK-40005INAIN AIN 400 : Add-On Supplement
XFT 210_700 0000 - xft business add-on
So, can everybody help me? Do we need any component more in BW or SAP ECC? How can we solve this problem?
Thanks in advanced for your help.
Best regards,
SeshenHi Sam,
Please check whether datasources are installed and active in the source system.
For remote activation you need role SAP_RO_BCTRA or authorization object S_RO_BCTRA in your profile.
If not active, you can activate via RSA5.
Afterwards, install the transfer rules again.
If you are lower than SPS8, check note 929935.
Hope this helps,
regards,
Olav -
Error while activating the business content object
Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
ThanksThanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks -
Unable to 'set the default source system' to Install Business Content
Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P -
How to activate the Info object catalog in Business content
Hi,
While trying to activate the Info object catalog, I found that some of the info objects under this catalog was earlier activated by some other developer. I brought this catalog (0SALES_CHA01) over to the Business content activation panel ( with only 'necessary object settings ) and all the info objects that also came along were de-selected since I didn't want to install those again). When I tried to install these I get an error indicating that some of the info object in question are not already active.. and ultimately the catalog doesnt get activated , although more than half of its infoobjects are already active under the '0CHANOTASSIGNED' node.
Please let me know whether I can get only the Catalog activated without getting any existing activated info object merged or installing those which are not already activated.
Thanks
ArunavaHello Arunava,
Just drag the infoobject catalog as u did earlier to the left in the bus cont installation screen with "only necessary object" option.
Dont try to deselect any object. Go ahead with the default options and install in background.
Now you can check for the available objects in the catalog. if you have some objects missing, and available in unassigned node,double click on the newly installed infoobject catalog, select the required objects (which are not yet assigned to this) from the left side and bring them to the right side.
this will make the unassigned objects assigned to the required catalog.
Hope it helps..
(please dont forget to reward points to helpful answers) -
Business content datasource enhancement
Hi Experts,
I am new to HR.
We are implementing HR modules Personnel development and Personnel administration, while I was looking into business content extractors 0HR_PA_0 and OHR_PA_1, I found that there were only few fields in the extract structure but there were many fields in the cube.Do we need to enhance the datasources? how it works?. If anybody did the enhancement to these datasources, please give me the information with examples.
AnitaNo, it is no necesary to enhance standard data sources. Those datasources extract, basically employee and date. Most infoobjects in cube are calculated from 0PERSON and 0EMPLOYEE attributes, having in count the date and employed extracted, because most in HR is time dependent.
Assign point is usefull -
Taking too much time incollecting in business content activation
Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des. -
Hi All,
I would like to know the infosource of 0SR_C01 procurement overview(aggregated) cube. while on help.sap it shows 0SR_MC01 as a multiprovider for 0SR_C01. But could not find the infosource for the same.
I would also like to know if anyone has the list of content infocubes and their infosources for SRM. Please share it with me.
Thank in Advance
NirenHi ,
for all business content, you can start here
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
scm
http://help.sap.com/saphelp_nw04s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
and bi best practice
http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
Check this link for SRM Business Content information: http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
DataSources
New DataSources have been created for NW 2004s BI Content Add-On 2 and SRM 5.0. These are described here, along with their extraction logic.
The following graphic shows the data flow from the DataSources to the DataStore objects
Structure
Each DataSource has an extraction structure and a data extractor. Generally, this is an RFC-capable function module.
There are two types of extraction: Specific extraction and generic extraction:
Specific extraction is strongly oriented towards the data model of the BI System and the necessary extract structure. It executes DataSource-specific processing steps.
The logic contained within the generic extraction is implemented centrally and can therefore be reused by the specific extraction modules. The generic extraction deals with access to the SRM database and is similar for each DataSource.
Generic and specific extraction
Extraction logic in detail
Data extraction involves the following six function modules:
InitLoad
InitLoad is called as soon as an initial upload is started in the BI System. In other words, it is executed when data is loaded into the BI System for the first time. The module can restrict the data extraction according to filter criteria that were defined in BI during extraction (for example, extract the data for a particular timeframe). InitLoad packages the data before it is transferred to the BI System.
DeltaLoad
DeltaLoad is called when a document is modified in the SRM System. The module writes data that has accumulated since the initial loading to a delta queue.
Data Collector
The Collector reads the required data from the database in the source system. For performance reasons, the data is then buffered in system-internal tables. The tables have the same structure as in the database. This saves time and effort, because data conversion is kept to a minimum.
Data Consolidator
The Consolidator groups data that belongs together from a business point of view. The consolidated data is stored in internal tables and is prepared for further processing.
Data Normalizer
The Denormalizer prepares the source data for the BI System. It calculates key figures that are required for the report but are not contained on the database and converts data types in the source system to data types of the BI System. Depending on the BI data model, the system now decides how each row is filled with data.
Data Mapper
During mapping of the data, the system defines which fields of the denormalized data structure are assigned to the fields of the extract structure. In this way, flat and one-dimensional lines are generated from the data.
The following table shows the technical names of the function modules of the individual DataSources:
Description
0SRM_TD_PO
0SRM_TD_CF
0SRM_TD_IV
0SRM_TD_PO_ACC
InitLoad
BBP_BI_PO_EXTRACT
BBP_BI_CF_EXTRACT
BBP_BI_IV_EXTRACT
BBP_BI_PO_ACC_EXTRACT
Collector
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
Consolidator
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
Denormalizer
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
Mapper
BBP_BI_PO_MAP
BBP_BI_CF_MAP
BBP_BI_IV_MAP
BBP_BI_PO_ACC_MAP
DeltaLoad
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
Hope this helps,
Regards
CSM Reddy -
Finding fields in R/3 for data extraction VS Business content
Hi all,
I am doing my first BW project after my training and I am finding it difficult to locate some fields that should be part of my report.
The Consultant says Sales Group, Inco terms, Open orders, Account assignment group, Sold to party, ship to party, Payment terms, Document currency and base currency, Complete deliver indicator, Order type and Count of Complete deliveries required should all be in the Order while transmission type and number of transmissions should be in NAST.
I have gone to R/3 - RSA6 to look at datasources and found 2LIS_01_S260 (Sales order) to have most of the fields but not payment terms, complete delivery indicator, open orders base currency and count of complete deliveries required. Also in Sales document header data, these fileds are not there.
Is it a case of not understanding the correct name of the fields if they are described in a different manner in R/3 or I have not done the proper thing? Can I just use an infocube in BW business content to get all the required objetcs -(infocube, infosource, datasource).
Thank youHi,
Finding the correct Infoobject and it's mapped field is a job of BIW consultant. But the problem is how to find them and how to frind respective R/3 field and it's table. You will be familar with them as your experience increases.
So you need to list of fields you require and then find out the Datasource/s which can give these fields by going through the Business content help or using LBWE Tcode in R/3.
The datasource you mentioned is obsolate one. i.e 2LIS_01_S260 .
You better to go wtih new DSes like 2LIS_11_VAITM,2LIS_11_V_ITM.
http://help.sap.com/saphelp_bw31/helpdata/en/8f/36f338472b420de10000000a114084/frameset.htm
If allmost all fields are avialable in a DS , then you can check the possibility of enhancing the DS for remaining Fields.
With rgds,
Anil Kumar Sharma .P -
Business Content for Bill Up transaction in CRM system
To all Experts,
I'm currently working on a project that requires Bill Up transactional data ( Source Table: CMSD_BU ) to flow from CRM to BW system. I'm looking for Business Content that can fulfill this requirement. However, till to date, I couldn't find any information of such Business Content. I'm not sure if such BC exist. Can anyone help if you have experience implement this data flow?
When searching for the DataSource / Extractor, I found BW Extract Structure CMST_BU_BW and CMST_BU_BW_C in the CRM system. But couldn't find any DataSource for both extract structure. Not sure if we need to install any support pack in order make the BC available in the system. Please help if you have any idea.
Thanks in advance.
Regards,
Hui PinHi Shalini,
The document is replicated from ECC to CRM without any errors.
For this document I just want to create follow up transaction in CRM.(I dont want to change the document in CRM)
The follow up transaction is in display mode. this is my problem.
Hi Rekha:
I have done following setting in CRM to create follow up transaction in CRM for the document which is replicated from ECC to CRM.
1) Defined the Copying Control for Transaction type
2) Defined Copying Control for Item categories
3) Defined Item category determination when copying
Thanks in advance,
Regards,
-Rahul. -
How to open document from business content in weby dynpro ?
Hello experts,
I've cretaed a webdynpro where I want to display a document which is attached
to a product in tx commpr01 in business content.
I've tested method o_cl_crm_documents->get_with_url , but
there I do not get a url in webdynpro.
Does anybody know another method/fm to display such a document from
business content in webdynpro ?
Thanks and best regards
GerdHello Mr. Jung,
I'm sorry but I didn't find this method linktourl.
In my web-dynpro I'm getting the url for my document after
cklicking on the selected row.
Then I just want to give this paramter to this linktourl method
and open the document.
How can I implement this method ? which class ?
Thanks Gerd -
Business Content or Information for GR/IR Account Report
Hi All,
I have an R3 report called GR/IR Account Report by PO Mismatch.
Is there any business content available for this in BI.
The below tables are using in the report.
bsis, " Accounting docs by account
bsas, " Cleared accounting docs by acc
bseg, " Accounting doc line item
ekko, " Purchase Order Header,
ekpo,
mkpf, " Material Document
lfa1, " Vendor details
ekbe, " PO History
ekkn, " PO Acct.Assgnment
usr21,
addr3_val,
ad3_flags,
stxh.
Could you please provide me your inputs on this
Regards
SriniThe new additional fields need to be populated are
ZZAUFNR Order Number *
ZZBEDAT Purchase Order Date *
ZZCRE_FI FI Doc Created By *
ZZCRE_PO PO Doc Created By *
ZZEBELN Purchasing Document Number *
ZZEBELP Item Number of Purchasing Document *
ZZKOSTL Cost Center *
ZZMWSKZ Tax on sales/purchases code *
ZZPROJK WBS element *
ZZTXZ01 Short text *
ZZUSNAM User name *
ZZXBLNR Reference document number *
ZZHWSTE Tax Amount in Local Currency *
ZZSGTXT Item Text *
ZZHKONT Finance G/L Account *
when '0FI_AP_4'.
Declare the local data fields to store data temporarily
data : l_dtfiap_3 like DTFIAP_3,
mwskz like bsik-mwskz,
l_ernam like bapibname-bapibname,
l_address like bapiaddr3,
l_bseg like bseg,
l_bedat like ekko-bedat,
l_ps_psp_pnr like prps-pspnr.
data : gt_return type bapiret2 occurs 0 with header line.
loop at c_t_data into l_dtfiap_3.
l_tabix = sy-tabix.
*Select the tax Code for the particular record from BSAK TABLE
select single mwskz sgtxt into (l_dtfiap_3-zzmwskz,
l_dtfiap_3-zzsgtxt)
from bsak
where bukrs = l_dtfiap_3-bukrs
and buzei = l_dtfiap_3-buzei
and belnr = l_dtfiap_3-belnr
and lifnr = l_dtfiap_3-lifnr
and gjahr = l_dtfiap_3-gjahr
and zuonr = l_dtfiap_3-zuonr
and augbl = l_dtfiap_3-augbl
and augdt = l_dtfiap_3-augdt
and bldat = l_dtfiap_3-bldat
and blart = l_dtfiap_3-blart
and bschl = l_dtfiap_3-bschl
and budat = l_dtfiap_3-budat.
if sy-subrc = 0.
modify c_t_data from l_dtfiap_3 index l_tabix.
else.
*If corresponding Document Number is not present in BSAK check BSIK
*TABLE
select single mwskz sgtxt into (l_dtfiap_3-zzmwskz,
l_dtfiap_3-zzsgtxt)
from bsik
where bukrs = l_dtfiap_3-bukrs
and buzei = l_dtfiap_3-buzei
and belnr = l_dtfiap_3-belnr
and lifnr = l_dtfiap_3-lifnr
and gjahr = l_dtfiap_3-gjahr
and zuonr = l_dtfiap_3-zuonr
and augbl = l_dtfiap_3-augbl
and augdt = l_dtfiap_3-augdt
and bldat = l_dtfiap_3-bldat
and blart = l_dtfiap_3-blart
and bschl = l_dtfiap_3-bschl
and budat = l_dtfiap_3-budat.
if sy-subrc = 0.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
endif.
select single hwste into l_dtfiap_3-zzhwste
from bset
where bukrs eq l_dtfiap_3-bukrs
and belnr eq l_dtfiap_3-belnr
and gjahr eq l_dtfiap_3-gjahr
and buzei eq l_dtfiap_3-buzei.
Select Created By and invoice Reference Number from BKPF table
select single usnam xblnr from bkpf
into (l_dtfiap_3-zzusnam,l_dtfiap_3-zzxblnr)
where bukrs = l_dtfiap_3-bukrs
and belnr = l_dtfiap_3-belnr
and gjahr = l_dtfiap_3-gjahr.
if sy-subrc = 0.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
move l_dtfiap_3-zzusnam to l_ernam.
refresh : gt_return.
Get the Fi doc Created By doing the function Module call
call function 'BAPI_USER_GET_DETAIL'
EXPORTING
username = l_ernam
IMPORTING
address = l_address
TABLES
return = gt_return.
move l_address-fullname to l_dtfiap_3-zzcre_fi.
if l_dtfiap_3-zzcre_fi is initial.
move l_ernam to l_dtfiap_3-zzcre_fi.
endif.
if not l_dtfiap_3-zzcre_fi is initial.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
if l_dtfiap_3-blart eq 'RE'.
.....Get New Fields from PO linked to FI Document.....................
Select PO Number from PO Line item from BSEG TABLE
select buzei buzid ebeln ebelp
into corresponding fields of l_bseg
from bseg
where bukrs eq l_dtfiap_3-bukrs
and belnr eq l_dtfiap_3-belnr
and gjahr eq l_dtfiap_3-gjahr.
if l_bseg-buzei eq l_dtfiap_3-buzei.
.....Already read this line, therefore ignore it......................
continue.
endif.
if l_bseg-buzid eq 'T'.
.....Don't read automatically created lines - Tax Line................
continue.
endif.
if not ( l_bseg-ebeln is initial ).
move l_bseg-ebeln to l_dtfiap_3-zzebeln. " PO Number
endif.
if not ( l_bseg-ebelp is initial ).
move l_bseg-ebelp to l_dtfiap_3-zzebelp. " PO Line Item No
endif.
if not l_dtfiap_3-zzebelp is initial.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
endselect.
.....Got PO Number from FI Document, Now get PO Details...............
.....Get Short Text...................................................
GET PO Line Item text
select single txz01 into l_dtfiap_3-zztxz01
from ekpo
where ebeln eq l_dtfiap_3-zzebeln
and ebelp eq l_dtfiap_3-zzebelp.
if sy-subrc = 0.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
.....Get Account Assignment...........................................
select ps_psp_pnr aufnr kostl sakto
into (l_ps_psp_pnr,l_dtfiap_3-zzaufnr,
l_dtfiap_3-zzkostl,l_dtfiap_3-zzhkont)
from ekkn
where ebeln eq l_dtfiap_3-zzebeln
and ebelp eq l_dtfiap_3-zzebelp.
if sy-subrc = 0.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
select single posid into l_dtfiap_3-zzprojk
from prps
where pspnr = l_ps_psp_pnr.
if sy-subrc = 0.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
endselect.
.....Get Name of Person who created PO................................
clear : l_ernam,l_bedat.
select ernam bedat into (l_ernam, l_bedat)
up to 1 rows
from ekko
where ebeln eq l_dtfiap_3-zzebeln.
endselect.
move l_bedat to l_dtfiap_3-zzbedat.
if not l_dtfiap_3-zzbedat is initial.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
refresh : gt_return.
call function 'BAPI_USER_GET_DETAIL'
EXPORTING
username = l_ernam
IMPORTING
address = l_address
TABLES
return = gt_return.
move l_address-fullname to l_dtfiap_3-zzcre_po.
if l_dtfiap_3-zzcre_po is initial.
move l_ernam to l_dtfiap_3-zzcre_po.
endif.
if not l_dtfiap_3-zzcre_po is initial.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
else.
.....Get new Fields from FI Document..................................
select buzei buzid ebeln ebelp projk aufnr kostl hkont
into corresponding fields of l_bseg
from bseg
where bukrs eq l_dtfiap_3-bukrs
and belnr eq l_dtfiap_3-belnr
and gjahr eq l_dtfiap_3-gjahr.
if l_bseg-buzei eq l_dtfiap_3-buzei.
.....Already read this line, therefore ignore it......................
continue.
endif.
if l_bseg-buzid eq 'T'.
.....Don't read automatically created lines - Tax Line................
continue.
endif.
if not ( l_bseg-ebeln is initial ).
move l_bseg-ebeln to l_dtfiap_3-zzebeln. " PO Number
endif.
if not ( l_bseg-ebelp is initial ).
move l_bseg-ebelp to l_dtfiap_3-zzebelp. " PO Line Item
endif.
move l_bseg-aufnr to l_dtfiap_3-zzaufnr. " Order Number
move l_bseg-kostl to l_dtfiap_3-zzkostl. " Cost Centre
move l_bseg-hkont to l_dtfiap_3-zzhkont. " GL Account
select single posid into l_dtfiap_3-zzprojk
from prps
where pspnr = l_bseg-projk.
if not l_dtfiap_3-zzprojk is initial
or not l_dtfiap_3-zzaufnr is initial
or not l_dtfiap_3-zzkostl is initial
or not l_dtfiap_3-zzhkont is initial.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
endselect.
.....Get PO Short Text................................................
select single txz01 into l_dtfiap_3-zztxz01
from ekpo
where ebeln eq l_dtfiap_3-zzebeln
and ebelp eq l_dtfiap_3-zzebelp.
if sy-subrc = 0.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
.....Get Name of Person who created PO................................
clear : l_ernam,l_bedat.
select ernam bedat into (l_ernam, l_bedat)
up to 1 rows
from ekko
where ebeln eq l_dtfiap_3-zzebeln.
endselect.
move l_bedat to l_dtfiap_3-zzbedat.
if not l_dtfiap_3-zzbedat is initial.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
refresh : gt_return.
Get PO Doc Created By
call function 'BAPI_USER_GET_DETAIL'
EXPORTING
username = l_ernam
IMPORTING
address = l_address
TABLES
return = gt_return.
move l_address-fullname to l_dtfiap_3-zzcre_po.
if l_dtfiap_3-zzcre_po is initial.
move l_ernam to l_dtfiap_3-zzcre_po.
endif.
if not l_dtfiap_3-zzcre_po is initial.
modify c_t_data from l_dtfiap_3 index l_tabix.
endif.
endif.
endloop.
Edited by: Srinivas Gogineni on Apr 19, 2009 11:10 AM -
After activation of atandard business content key figure is not visible
Hi all,
I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
Thanks and regards
Ankit modiHi
Again it install from BI content and do the changes what ever u want by RSD1
Cheers
Edited by: SDN USER on Jun 26, 2008 12:04 PM -
Error message in Business Content Installation
Dear All,
I am getting one error message while install some objects in FI through Business Content.
Object '0GL_ACCOUNT_T011_HIER_EC1' (ISTS) of type 'Transfer structure' is not available in version 'A
I have search around but I dont find any related to it.
Please suggest.
ThanksHi,
Exactly what your trying to activate?
info object or data source?
Use grouping option as - only necessary object and drag required object form middle pane to right side pane.
try to install it. If it shows any dependences then those first need to install.
above mentioned name is GL Account master data source hierarchy.
Thanks
Maybe you are looking for
-
Satellite A100-512 - Message appears - Network cable unplugged
My laptop model is Satellite A100-512 bought in Germany, am now in India, whenever i connect a LAN cable i get the status as "Network cable unplugged", the system shows the ethernet is working fine! when i looked into the device properties...what cou
-
Can't open .cr2 files in Bridge CS4 v.3
Been browsing for hours; can't find the right answer... I just purchased a Canon 60D, which shoots .cr2 raw files. They won't open in Bridge, which previously opened my Canon 10D .crw raw files. What do I need to do to make the .cr2 files open? I'd r
-
How come my Iphone4 ringer is not working after upgrading to iOS 5
I recently updated my iphone4's firmware to iOS 5. I just found out that my ringer is not working anymore. It seems like it's always in silent mode. I tested music and it worked fine. Please help...thanks in advance
-
Problem with embed font such us some character
Hi i have some problems with a font. I have this simple code. [CODE] package { import flash.text.AntiAliasType; import flash.text.TextFormat; import flash.text.TextFieldAutoSize; import flash.text.TextField; import flash.text.Font; import flash.disp
-
Sony wireless headset model TMR-RF930.
hello community.just unpacked my Sony wireless headset model TMR-RF930. need steps to connect 2 iMac