ERecruitment TREX Installation Index category

Hi All,
SDN is really very helpfull. Thanks to one and everyone for sharing their knowledge. I am having a problem with TREX installation.
We installed TREX with SES. First i created Search service relation with TEST_SSR. with this ssr a index category is created. I got some errors in this index category. So i deleted this index category and tried to create another Search service relation with different name. Here New index category is not created but the old category is exisiting and when i am trying to use it, it is giving an error that "TEST_SSR" does not exist. So could u pls suggest me to create a new index category for new SSR.
Thanks

Hi,
Now for the step activate index category enter the search server id TREX_SSR as you have created. keep it as it is.
Then check for the rfc destinations if its fine and the link is made.
Now after that you will create the index category so only refer to the last step(split in multiple to create the index category as in the document).
Regards,
Divya

Similar Messages

TREX error Index category could not be created: Exception 8,Error

Hi,
I am geting the error while creating the index on TREX 6.1. In t-code SKPR07 I have check the application log and got the following error and I am not able to create the index. Moreover I have check all setting as per installation document its looking fine. Please help me.
error:-
Index category could not be created: Exception 8, Error
Message no. INDEXING015
Diagnosis
An error occurred when a new index category was generated using the
function module SRET_IDXCAT_CREATE.
Thanks,
Harshal

Hi Harshal,
i just found your Question here, while I was searching the SCN for a solution. Because I had the same Issue.
In the SAP Support Portal I found the SAP Note 1512896 - KPro: Index category could not be created.
Take a Look at it. I guess, that could solve your problem (if it´s still exists)
Regards
André

Build Up new TREX index category and leave old catgory for search requests

Hello All,
we are using TREX 7.1 in a SAP Netweaver Environment only for a full text search in transaction CV04N. The TREX Server is running on a Unix machine.
But no we have a problem that our current productive index category contains an inconsistent tempterm failure. Because of this failure it might be that the search result list may not contain all documents for the search query
Therefore we have to rebuild our big index in a complete new index category. And because this takes a lot of time we would not have all of our documents searchable in the index.
Now my question: Is it possible to use the existing index category to search after documents whereas a new index category will be build up in an initial and incremental indexing process (BOTH FROM THE SAME SAP SYSTEM)?
THANKS.
Christian

Hi,
Now for the step activate index category enter the search server id TREX_SSR as you have created. keep it as it is.
Then check for the rfc destinations if its fine and the link is made.
Now after that you will create the index category so only refer to the last step(split in multiple to create the index category as in the document).
Regards,
Divya

How to create index category for TREX in ECC for E-recruiting

Hi guys,
   i have finished the settings in SKPR07 transaction for SSR and attached to the HR_KW the SSR id.
   But i don't know how to create or generate the index category.
   From the posts of this forum someone told me to regenerate the index in SKPR07 , but i failed.
   Can anyone show me the way?
   Thanks in advance.
    sheery

The solution is so simple you want to kick yourself....
You need to upload a document. The index catagory is created automatically. I recommend simply adding an attachment to a candidates profile.
;p)

Uploading a document inorder to create index category

I've just installed TREX 7.0 and completed most of the Technical configuration for E-recruiting 604. I am currently on step "Add document attributes to Index Category" which requires an index category to be created for document area HR_KW. Inorder to do that, there needs to be atleast 1 document uploaded. I haven't been able to figure out yet the most effective way to upload a document. How can I accomplish this?

Hi,
as you are probaly not uploading directly to TREX but rather to your e-recruiting application, it may be better to ask in that area (HCM).
Best, Karsten

SRMO - Cannot delete Index Category after System Copy

Hi,
I am trying to delete incorrect Index Categories using t-code SRMO after a system copy (restore db from backup) from our production system to our sandbox system.
When I select the Index Category and click on the "Delete Category" button I get this message:
Error during deletion of language 'EN'. Search
engine result '3147'
When I click on the Help button I get this:
Error during deletion of language 'EN'. Search engine result '3147'
Message no. SRET148
Diagnosis
When the index category is deleted, all languages, and consequently all physical indices on the search server (RFC server) are deleted.
If a physical index could not be deleted, the index category is not deleted or set to inactive either. This is to prevent the index from staying on the search server without R/3 inforamtion.
Procedure
Firstly clean up all languages / indexes for which this information appears.
Use the function to delete an index without R/3 information (if such an index exists) and / or the function to delete the language without an index from the R/3 System.
You can then call the function 'Delete index category' again.
Any ideas on what function they are talking about in the second to last paragraph: "function to delete an index without r/3 information"?
Thank you,
Neil

I have exactly the same problem, only that the index category still can't be deleted even after I deleted the languages first. I still get the error message '3147'. It says that there was an error deleting the languages. As procedure it is suggested (as before) to first delete the languages and then again the index category. But the languages are no longer displayed in the index category.
Does anybody know how I should proceed in order to delete the old invalid index and to create a new one for indexing with the new TREX?

Trex installation error

hello friends,
iam doing trex installtion in my local system, it's in installwebserver and trex webpages. i got bellow error:
TRACE [synxcaccmg.cpp:648]
 CSyADsPath::fromString(SAP_ALL\IIS_WPG)
Account SAP_ALL/IIS_WPG has ADS path 'WinNT://SAP_ALL/IIS_WPG'
TRACE [synxcaccnt.cpp:571]
 bool CSyAccountImpl::do_isMember(IUnknown* pAccount, iastring sName) const
INLD50044610A\rajadm is not member of group "SAP_ALL\IIS_WPG"
TRACE [synxcaccmg.cpp:648]
 CSyADsPath::fromString(INLD50044610A\rajadm)
Account INLD50044610A/rajadm has ADS path 'WinNT://INLD50044610A/rajadm'
TRACE [synxcgroup.cpp:425]
 void CSyGroupImpl::addMember(PSyAccount pAccount)
IADsGroup::Add: HRESULT = 0x8007056b
ERROR 2008-02-15 17:06:41 [synxcgroup.cpp:426]
 void CSyGroupImpl::addMember(PSyAccount pAccount)
FSL-01006 Unable to add account <#0> to group <#1>. <#2>
TRACE [iaxxejsbas.hpp:270]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::ESyException: ESAPinstException: error text undefined
TRACE [iaxxcwalker.cpp:301]
 CDomWalker::processStep()
<html><head></head><body>An error occurred while processing service SAP NetWeaver '04 SR1> SAP System Installation> Search and Classification (TREX)> TREX Instance Upgrade / Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li> <li>reset your input for the current task. In this case, SAPinst will permanently remove all installation files from the installation directory. This gives you the opportunity to restart from scratch.</li></ul>Log files are written to C:\Program Files\sapinst_instdir\NW04\PATCOL640\WEBAS630\IND\TREX\MAIN.</body></html>
pls help me out in this issue.
points guaranteed..
regards,
venkat

Hi Rich,
Thanks for the reply. I tried whatever you have said. After executing the command "G:\usr\sap\trex_02\TREXDaemon.exe -f G:\usr\sap\trex_02\TREXDaemon.ini", instead of MSVCP60.DLL missing, I got
"An instance of this service is already running.
You should consider checking if the process with the id 2548 is running and of type TREXDaemon. If you are sure that there is no instance alive remove the file G:\usr\sap\trex_02\lock\[email protected] and restart." and also I have the MSVCP60.DLL file under C:\WINDOWS\system32. My EP is on Windows Server 2003 Enterprise Edition.
I removed [email protected] and restarted. I am still getting the same error "Index could not be created; creating index failed: HTTP server error: 502 (Errorcode 7266)". I am still not able to create an index. While TREX installation i have a first_test_index created succesfully. But No index Server is Displayed in TREX Monitor. While performing Serach I get No Search Index could be found.
Rich could you help me out.
Thannks and Regards,
Piyush

TREX not indexing Excel files

Hi all,
We are getting the following error when trying to index some MS Excel files:
14011 - Filter: The file is password protected or encrypted
We are using TREX 7.10 rev 34.
We have found that the cause of this is when the Excel file has been set to protect the worksheet with a password (in Excel, go to Tools -> Protection -> Protect Workbook -> set password). It seems odd to me that TREX cannot index a file like this because it should be able to open it. I would think that it only would have problems if it were trying to write to the file (which it is not trying to do).
Does anyone have any ideas as to why it's like this or what can we do about this other than remove the workbook password? We have dozens of files like this, and I need to find a solution other than removing the password.
Thanks!
-StephenS

Hi Stephen,
I couldn't find any release note specific to this issue however I do know that there are newer filter versions available in the most recent TREX revisions so the upgrade is usually a good option to resolve such issues. Of course I cannot say for certain if Revision 39 will resolve it without trying to index your specific document on that version myself.
Anyway I know there are some Oracle filter issues ongoing with TREX 7.1 so I think an upgrade to a newer revision may be inevitable at some stage, but perhaps in this scenario it would be best to wait for confirmation of the exact revision that contains the fix from the TREX experts in your message.
Kind regards,
Lorcan.

TREX installation and configuration in Portal 7.0 SP9 evolution version

I have got install the 7.0 SP9 evolution version . In the specification , it has given clearly that, TREX is not available. How can i install TREX in the portal system.
where is the Trex installable avilable ?
which version is suitable for the 7.0
What are the configuration steps ?

Hi Vijay,
you should use either TREX 7.0 or TREX 7.1 with the EP 7.0 . Please see the TREX installation Guide for detailed information how to install and configure the TREX for using with the Portal.
Best regards,
Mikhail

Trex installation

Hi All,
I am Planning to install Trex and i am new to this. We are running with JAVA + ABAP stack standalone box.
We need to the installation in the same box, is it possible or not ?
While starting the installation i am getting three types of options
1. Global File system with a Trex instance
2. Installing a TREX Instance Only
3. Installing a TREX Global File System
In my case which option i have to choose ?
While doing the installation it is asking for SAP SID here i have to give new one or already existing one ?
Suggest me how to proceed furhter.
Kind Regards,
Phanikumar.

Hi PhaniKumar,
Check the following TREX Installation guide:
[https://websmp102.sap-ag.de/~sapidb/011000358700004245702005E.PDF]
Hope this helps.
Regards,
Adren

Help with TRex Installation

Hi, I am trying to install TRex (6.1.09.00) on my local portal (Netweaver 04 (640) - Stack 12) and during the 2nd last step of the installation I get the following message:
"error starting web server" and then the installation fails. When I checked the log, I got the following error message:
"The system cannot find the file specified.)in execution of a 'CreateProcess' function, line (278), with parameter (C:\usr\sap\Python
python.exe C:\usr\sap\trex_02/CCMS/install_config.py)".
I tried installing a couple of times and I always got the same error messages. Can anyone please help me? Thanks a lot for your valuable time.
Sincerely,
Sri

Hi,
When once Trex installation is failed, subsequent tries will also get the same error. My advice woudl be to uninstall the trex, delete all the sap_inst dir contents and delete the trex website after uninstallation. Go ahead with fresh installation. But the specify the new trex instance suppose previously you have specified 00, now specify 02 or 03 etc.
Never install Trex on same server on which portal is installed. It slow down your portal performance.
As well you need to satisfy the pre-requisites specified in installation directory.
https://websmp102.sap-ag.de/~sapidb/011000358700000082762005E.PDF
Hope this helps.
thanks,
Praveen
PS. Dont forget to reward points

E-rec How to create or generate the index category????? SOS!!!!!

Hi guys,
How to create or generate the index category?.
From the posts of this forum I have read more things but anything works:
reports:
-RSRETT02
-RCF_INITIALIZE_KPRO
-RSTIRIDX_INDXCAT_RETRIEVE
Can anyone show me the way?
Thanks in advance.

Hello,
If you haveat least Version 7.10.18 then KPro configurations are no longer required. Did you activate Business Function HCM_ERC_SES_1 as this is required for SES? The scenario to choose will depened on whether you are making a new implementation, upgrading without use of SES before or upgrading after using SES with earlier versions. Scenario 1 is for when you have activated HCM_ERC_CI_3 after using earlier versions with HCM_ERC_SES_1 already activated. Scenario 2 is for those who have upgrade and activated HCM_ERC_CI_3 but where using search without SES in their earlier version. Last scenario is when you are making a new e-Recruiting implementation (not upgrading). Also check notes 1426757 and 817145.
When you try to search are you getting an error? Can you check in SLG1 transaction after trying to search and post the error messages. Also can you execute report RCF_CHECK_SEARCH_SETTINGS as it will point you to the missing configurations points if any based on your version.
Regards,

Error during Addon Installation Index was outside the bounds of array

Hi wen im trying to install addon on x64 2003 server its throwing me error
Customer library
"Error during Addon Installation Index was outside the bounds of array."
"Error(-2) at EndInstallEx(False) at the end of the addon installation"
Please provide me a solution for this.
Thanks
Rekha

Hi Rekha,
You may check this: Add-on Installer Issue
Is this your add-on or SAP add-on? If it is 3rd party add-on, post it to the other forum
Thanks,
Gordon

TREX installation problems

I have EP 6.0.2.4.7 on MSS 8.0, J2EE pl 22
The Portal is up. I tried to install TREX on the same server. However I had not installed the IIS before I started. I got an error during the TREX install about creating a site in IIS. So I decided to uninstall TREX cleanly and re-install after I got my ISS up. That way I hoped it would create the site this time.
However I guess the Control panel - Add remove programs does not uninstall TREX cleanly. Because I tried to un-install / re-install and this time it was not showing the TREX services as originally. One more pass at the same, and now I have errors during installation.
My question is, how can I remove all traces of TREX from this box ( while not touching the portal, J2EE, MSSQL etc.), so that I can start again just as if it was the first time......
Regards, Sanket

Clear out all of your temp folders. TREX installation stores some information in the temp folders to be re-used. I've ran into the same problem and noticed that when i reinstalled with the same user my previous settings were remembered, but when I installed with a other user I could select the options again......

Use TREX to index /search archive on IXOS?

I wonder whether TREX can index/search archives on IXOS.
Could anybody share experience here?
Thanks!

Hi Eric,
Using SAP Netweaver Enterprise Search you can search content from ERP, BI, KM, File Search, Business Object Search, Search in Webservice etc., for more information please go through this URL
https://websmp209.sap-ag.de/nwes70
Please provide points if this helps you

ERecruitment TREX Installation Index category

Similar Messages

Maybe you are looking for