Ericsson N5321 gw not working

Hi all,
I have a X240 with the WWAN  card Ericsson N5321 gw. The card works fine with Windows 8.1 enterprise. Now after installing Windows 10 9926 and upgrading to 10041 the wwan connecting is not working e.g. the device is not ready (yellow mark in device manager) I reinstalled the driver from 8.1 64 bit manually not help. Any suggestions besides going back to Windows 8.1?
Thanks a lot,
shortie

Sorry for the silly response but I managed to solve the problem by purchasing an HP Elitebook 840.
I believe Lenovo only benefits from the good reputation of the Thinkpads (due to the efforts from IBM)- but looking back at my personal experience with them they are just expensive with bad quality and service.
We have switched all Lenovo devices for HP and see no reason for complaint so far.
Sorry I have no better news to share...

Similar Messages

  • T440p n5321 GPS not working

    Hello,
    I just upgraded my T440p with an Ericsson N5321gw  mobile broadband card. Unfortunaltely the build in GPS module doesn't deliver any data. The driver is correctly installed (visible in the Device Manager) and the firmware is updated.
    When I run Microsofts sensor diagnostic toolkit, it sais the device is Initializing, so first thing I guessed was, it doesn't get GPS fix. But now, since I ran the tool outside under clear sky it should have gotten fix by now.
    I use Windows 8.1 and the mobile broadband card is activated. I'm running out of ideas now, can anybody give me a clue how to get the GPS device to work?
    Thanks,
    tmoehle

    FOLLOW UP;
    when ultranav driver is installed then i do not seem to have issues with the trackpoint movements, until I start clicking buttons. For example this is a standard event. I am in window , like in  a multipage word document, and i want to scroll down using the slider on the left frame of the window. If I do it by keeping the button pressed and moving the trackpoint - all works fine; but if I want to do it by simply multiple clicks at the bottom part of that slider part of windoe frame (left frame) then after 3 clicks (always ) the track point and buttns freeze forever, or sometimg can be unfreezed by external mouse movements, or by quikcly moving my hand over the touchpad...
    As if quick succession of button clicks created the problem
    When no ultranav driver is installed (and touch pad disabled in BIOS) then occasionally the button do not work and in general harder clicks are needed, and occasionally succesion of clicks also freezes the track point and buttons...some time can be "woken up" by external mouse movements and sometimes not.
    thanks for any help or pointing to a place on www where I can find solution..
    by the way anybody heard of physically putting the old trakcpoint system (like e.g. in T60) to t440. ???

  • Remote update service on sony ericsson G502 does not work

    I have a Sony Ericsson G502.  The phone has a problem  which causes it to restart when I am on a call.  Sometimes it just restarts on its own.  I searched on the net and found that other people have also seen the same issue and I believe a software upgrade will fix the problem.
    I dont have the usb cable of the phone so I cannot do the upgrade using the 'Update Service' software from the pc.  I tried doing a 'remote update service' from the phone in Menu-->Update Service-->Search for Update, but it just says that your phone is running the latest software.  The current software version on my phone is 1203-8254 R1FA031 080512.  Is this the latest software available?  I have bought the phone 2 years back (but used it sparingly), and I am not convinced that there is no update to this software.
    Please suggest a way I can upgrade this phone?  I like the phone, but this restart problem makes the phone very unreliable for everyday use.   Kindly help.

    Your best bet is to get a USB cable and update the software with SEUS on your PC.If, as the remote update service tells you, you already have the latest software, you can only re-install the software via PC anyway.Alternatively, you can perform a master reset on the phone and see if that fixes the problem.Hope this helps.

  • S430 - Win 8.1 - WWAN Ericsson H5321 gw not working

    I have a ThinkPad S430 with a WWAN card preinstalled.
    The machine came with Windows 7, but I've actually wiped it and installed Win 8.1
    However, I never managed to get the WWAN to work.
    When I enter the device manager I see some random flashes / updates and occasionally a device shows under "Network adapters" called MbmLowExt.
    It has a yellow mark giving Code 45 "Currently, this hardware device is not connected to the computer" and sometimes Code 10 "This device cannot start" (depending if the device is shown or not).
    I googled this problem for ages and found a lot if similar cases, however, none of the proposed solutions fixed my issue.
    I have installed the newest driver version from the Lenovo site (8.0.10.1 – dated 20 Jun 2013 - g7wo09ww.exe). This driver should actually work without a problem – however it doesn’t.
    Interestingly enough the driver details of MbmLowExt show a different version (8.0.8.5 dated 07.DEC.2012).
    I have also tried to upgrade the firmware using the update tool I found on the Lenovo site when looking for S430. However, the tool always failed claiming it could not find the device.
    I have tried a huge number of different combinations to solve this issue. Old and newer driver versions – the compatibility trick shown here:
    http://www.bibble-it.com/2012/03/17/f5521gw-wwan-install-on-windows-8-cp-lenovo-x220t
    rebooted my machine several times and tried the firmware update with all different driver versions and even without driver versions.
    I tired to uninstall / delete all drivers also from System32 no luck.
    Anybody who managed to get the WWAN running under Windows 8.1 with the most recent drivers?
    Before you as: yes the modem is installed in my machine – I can see the SIM card slot )

    Sorry for the silly response but I managed to solve the problem by purchasing an HP Elitebook 840.
    I believe Lenovo only benefits from the good reputation of the Thinkpads (due to the efforts from IBM)- but looking back at my personal experience with them they are just expensive with bad quality and service.
    We have switched all Lenovo devices for HP and see no reason for complaint so far.
    Sorry I have no better news to share...

  • TP8's Ericsson module does not work after update to win10 & two more unknown devices

    So after update I installed: Intel Platform Device Driver, DPR Util, Ericsson driver (just as I did on win8) but have no luck! And I tried to insert working sim but no effect. Please help. http://i.imgur.com/eVgRkks.png?1 (See Device Manager: blue highlighted is possible Ericsson module)

    to correct bad spelling:
    a) What to do to get the imac sending WIFI out again?

  • U10i sony ericsson speaker not working...need help

    u10i sony ericsson speaker not working...need help...thanks

    Anyway thanks... Yesterday my handphone drop again,than the speaker suddenly recover.

  • Application not working in windows 8

    Hello Sir,
    I have Lenovo Z500 laptop recenty brought.
    When i Run any application in windows 8 It will error as shown in below 1st image.
    So how to solve this error.
    I troubleshoot that program. but still it is not working.
    Hope this will solved out soon...
    And I try to install microsoft office 2013 365 days pack but it is also not stating.
    all .net framework installed in my laptop those are displayed In 2nd image. 
    Thank you

    Hi sanketec87,
    I would restore the computer with the factory defaults.
    A problem probably occured with the previous install of Windows 8.
    Vince.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Thinkpad Helix - Screen auto rotation does not work (Issue 3/3)

    Hi,
    I have installed a clean Windows 8.1 on the Helix and have several issues. Putting them into several threads so they can be answered independently.
    The first thing I did after installing the system (and critical Windows Updates) was running the Lenovo System Update tool and downloading everything.
    Screen rotation does not work. In “Device Manager” I can see “C5621 gw Mobile Broadband Geolocation Sensor” and “Hid Sensor Collection”. The HID one has an exclamation mark next to it. Are there some drivers I need to download to make this work. I did of course check if screen rotation is not locked – it is not (I did turn it on/off a couple of times, without any effect). Manual rotation (using display settings) works fine.
    Thank you in advance for any help,
    Łukasz
    Solved!
    Go to Solution.

    Hi Lukasz,
    Try, in device manager, right click on HID Sensor Collection then uninstall. Reboot, and see if the driver is loaded properly, if not click on scan for hardware changes.
    Vince.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Fingerprin​t Reader does not work under Win 7

    I have a T500 which I have just upgraded from Windows Vista Business to Windows 7 Professional.
    Everything apart from the Fingerprint Reader and the Wireless Broadband seems to work.
    The Fingerprint Reader is the Authentec AES2810, with driver version 2.0.0.18 dated 24/11/2009.
    If I run the Lenovo Fingerprint software version 3.3.0.58 I get the error that the software cannot
    communicate with the sensor.
    The Wireless Broadband card is the Ericsson F3507g. The follwing drivers are installed:
    Network adapters:
        - F3507g Mobile Broadband Driver, version: 1.0.0.52 dated 29/07/2009
    Ports (COM & LPT):
        - Ericsson F3507g Mobile Broadband Minicard GPS Port (COM6), version: 1.0.0.28 dated 29/09/2008
        - Ericsson F3507g Mobile Broadband Device Management (COM4), version: 4.54.7103.1 dated 26/06/2009
    Smart card readers:
        - F3507g Mobile Broadband USIM Port, version 6.0.0.7 dated 12/05/2009
           Even if there is the driver information indicated above the USIM device says:
            "No drivers installed for this device."
    Universal Serial Bus controllers:
         - F3507g Mobile Broadband Device, version: 4.54.7103.1 dated 26/06/2009
    If I use the ThinkVantage Access Connections software I get the following error message:
    "The current wireless WAN connection is being managed by another client utility.
    Close the client utility and try again." But to my knowledge no other Wireless Broadband client is running.
    If I try Mobile Broadband Connect via the Vodaphone UK interface I get the following error message:
    "No Wireless Mobile Broadband device found."
    And finally if I try ThinkVantage GPS I get the folowing message:
    "The GPS NMEA CPM port is not available. You need to check the following things.
     - Another GPS application is using the COM port.
     - COM port is disabled. You can enable the COM port in Device Manager."
    Under Windows Vista both the Fingerprint Reader and the Wireless Broadband device worked without
    any problems. Do anybody have any ideas on how I can resolve these two problems.
    Best regards,
    Frode
    Solved!
    Go to Solution.

    Yes, it is the driver that seems to be the problem. Here is how I proceeded. Before I started to removed the Lenovo software and the driver I first made sure the the automatic driver installation was turned off. The easiest way to do this is to type "change device installation settings" in the Start Menu search box. A window then pops up with the question: "Do you want Windows to download driver software and realistic icons for your devices?". By default this is usually set at "Yes, do this automatically". Instead select the option "No, let me choose what to do", which will bring up another menu where one select the last option: "Never install driver software from Windows Update."
    After you have installed the new driver do not forget to put it back to the recommended automatic mode.
    I first went to Control Panel - Uninstall Programs and uninstalled the Lenovo Fingerprint Software. I then went to the Device Manager and uninstalled the AuthenTec driver version 2.0.0.18 and checked the box delete this driver software. I then rebooted the PC and during pre-boot went into the BIOS, selected Security and Fingerprint Reader and made a reset on the reader. After reboot I reinstalled the Lenovo Fingerprint Software 3.3.0.58 (7wf160ww). This time the installation went through without any error messages but when I started the software I discovered that it still did not work. When trying to run the tutorial or to enroll fingerprints I got the old error message: "Cannot communicate with sensor. Please confirm the sensor is ready."
    I then checked the driver and I found that I now had the older AuthenTec driver version 8.1.2.56 dated 07/07/2009 and everything looked OK from the driver point of view. I then suddenly remembered that I had forgot to uninstall the AuthenTec TrueSuite software. I immediately uninstalled the TrueSuite software and also yet again the Lenovo Fingerprint Software, but left the newly installed driver in place. After a reboot I again reinstalled the Lenovo Fingerprint software and this time it worked. I can now run the tutorial and enroll fingerprints and the fingerprints work 100% for the Windows login. I have not yet tried to install Lenovo Client Security. I will do that later. However, I have discovered that the AuthenTec TrueSuite software has not been reinstalled after doing the last Lenovo Fingerprint software reinstallation. I am not sure if this is a good or a bad sign. Perhaps Bananaman or Cleo_Lenovo can give me some feedback on this issue.
    I thank you all for helping me out with this problem. I find the Lenovo Forums of great interest and usefulness.
    Cheers,
    Frode

  • Tecra M10-10z - 3G does not work after Win 7 installation

    Tecra M10-10z I have installed Windows 7 pro 64bit
    Everything is configured correctly, but connection 3G does not work: the message is " no network"
    with Windows XP is ok.
    I did not find firmware updates or similar.
    Is there someone who can help me?
    tks

    Hi
    In order to use the 3G you should firstly check if the 3G ericsson module was properly installed.
    In case there is an yellow exclamation mark visible in the device manager, the 3G driver should be reinstalled.
    I found on the Toshiba EU driver page:
    [Ericsson 3G Win 7 driver|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=295&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=295&page=1&ID=71930&OSID =-1&driverLanguage=42]
    Furthermore ensure that the 3G RF Power Control Utility has been installed properly.
    The 3G RF Power Control Utility" activates your 3G on startup.
    This tool can be found here:
    [3G RF Power Control Utility for Win 7 64bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=322&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=322&page=1&ID=73658&OSID =-1&driverLanguage=42]
    Hope the 3G network would functions after the reinstallation of both tools.

  • IChat video call not working.

    Hi there,
    Please kindly advise on my ichat video issue.
    ichat indicated this computer does not support video chat.
    We have two mac connected to a router named Ericsson Broadband and the other mac ichat video is working but my isn't working and my macbook pro is newest than the other one. I have gone through the same configuration with the other mac which is working on Preference-Security, Preference-Sharing, Preference-Network. All same configuration as the other mac which ichat is working.
    I did a install application download from gmail for the video but thereafter is not working i demounted it.
    I did saw from youtube to delete the com.apple.ichat.plist file and is not working either so i reinstalled the ichat application again and also not working.
    We can use Skype to chat and gmail video but not on ichat video only audio chat only.
    I will be appreciate if you can list out the check list for me or other to check all the possible way of error on configuration.
    Thanks in advance for your reply
    Regards
    FUIFUI

    Thanks again Ralph for helping here.
    Hardware - USB - USB High -Speed Bus: Built-in iSight
    The log are as below:
    Last login: Fri Jul 23 07:08:50 on ttys000
    Chin-Lee-Fuis-MacBook-Pro:~ user$
    Chin-Lee-Fuis-MacBook-Pro:~ user$ /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
    091600.936386 ER_AddFilter (0): Adding [Chin Lee [email protected]]->[0]
    091600.936411 setLocalUserName: Chin Lee [email protected]
    091600.938383 Default video size is (640 x 480)
    091600.939556 H264: (640 x 480) @ 20 fps
    091600.941852 H264: (320 x 240) @ 30 fps
    091600.944156 H263: (352 x 288) @ 30 fps
    091600.945305 H263: (176 x 144) @ 30 fps
    091600.945416 ######################################
    091600.945423 # SoundDec_Create(16000 --> 3) #
    091600.945428 ######################################
    091600.970844 Leaving SoundDec_Create
    091600.974187 Audio Unit Parameter List = 7, result = 0
    091600.974211 CurrentFormatmSampleRate 44100.000000
    091600.974221 CurrentFormatmFormatID lpcm
    091600.974225 CurrentFormatmFormatFlags 0x00000029
    091600.974229 CurrentFormatmBytesPerPacket 4
    091600.974233 CurrentFormatmFramesPerPacket 1
    091600.974237 CurrentFormatmBytesPerFrame 4
    091600.974241 CurrentFormatmChannelsPerFrame 2
    091600.974244 CurrentFormatmBitsPerChannel 32
    091600.974248 OurFormatmSampleRate 16000.000000
    091600.974253 OurFormatmFormatID lpcm
    091600.974257 OurFormatmFormatFlags 0x00000029
    091600.974260 OurFormatmBytesPerPacket 4
    091600.974264 OurFormatmFramesPerPacket 1
    091600.974268 OurFormatmBytesPerFrame 4
    091600.974271 OurFormatmChannelsPerFrame 1
    091600.974275 OurFormatmBitsPerChannel 32
    091600.974284 Reached err = 4294956417, 459
    091600.974290 Reached err = 4294956417, 467
    091600.975831 ### NEW STATE: to: VC_INIT, from: VC_INVALID
    091600.975865 ### NEW STATE: to: VC_IDLE, from: VC_INIT
    091600.975880 ++++++++ confStatusMapRemoveAll
    091600.975885 ( ) -- mapUserIDToSecurityInfo cleared --
    091600.976118 dispatch_CommNATProc
    091600.979775 selectedCamera: no camera has been set yet.
    091600.979876 Selected microphone is the null device microphone.
    091600.979963 vcCapabilitiesOfCPU returns: 0x00000fff
    091600.980113 BWD: GotBandwidth: 15962/8523144 (up/down) @[15.1.168.192:0.255.255.255]
    091600.980173 BWD bandwidth: 15 kbits up, 8523 kbits down.
    091600.980194 videoNetworkCapable: 0 -- 0 max participants.
    091600.980200 audioNetworkCapable: 0 -- 0 max participants.
    091600.980250 Supports PCMU wideband for audio: 0 / video: 0
    091600.980280 vcCapabilitiesOfNetwork returns: 0x00000345
    091600.980288 vcCapabilitiesOfRouter returns: 0x00000000
    091600.980293 vcCapabilities returns: 0x00000345
    091600.981297 Found 2 cameras:
    091600.981383 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    091600.981487 Built-in iSight - 0x2440000005ac8507 (0x104, 0x104)
    091600.981542 selectedCamera: no camera has been set yet.
    091600.981631 selectCameraWithTundraDeviceID: 0x104 returned 1
    091600.985968 Microphone devices:
    091600.986164 Internal microphone
    091600.986268 Line In
    091600.986519 Selected mic: Built-in Microphone / imic
    091600.986616 Found 2 cameras:
    091600.986679 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    091600.986761 Built-in iSight - 0x2440000005ac8507 (0x104, 0x104)
    091600.986835 selectedCamera2 GUID returned Built-in iSight
    091600.986894 selectCameraWithTundraDeviceID: 0x104 returned 1
    091600.990675 Microphone devices:
    091600.990763 Internal microphone
    091600.990823 Line In
    091600.991022 Selected mic: Built-in Microphone / imic
    091600.992795 Selected microphone is Internal microphone.
    091600.993231 Selected microphone is Internal microphone.
    091602.230195 Found 2 cameras:
    091602.230245 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    091602.230291 Built-in iSight - 0x2440000005ac8507 (0x104, 0x104)
    091602.230321 selectedCamera2 GUID returned Built-in iSight
    091602.230338 selectCameraWithTundraDeviceID: 0x104 returned 1
    091602.234354 Microphone devices:
    091602.234451 Internal microphone
    091602.234509 Line In
    091602.234706 Selected mic: Built-in Microphone / imic
    091602.237567 Selected microphone is Internal microphone.
    091602.239224 Found 2 cameras:
    091602.239255 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    091602.239298 Built-in iSight - 0x2440000005ac8507 (0x104, 0x104)
    091602.239327 selectedCamera2 GUID returned Built-in iSight
    091602.239345 selectCameraWithTundraDeviceID: 0x104 returned 1
    091602.243263 Microphone devices:
    091602.243360 Internal microphone
    091602.243475 Line In
    091602.243670 Selected mic: Built-in Microphone / imic
    091602.244559 Selected microphone is Internal microphone.
    091617.016506 Comm reporting flags: 000000CC
    091617.332881 CommNAT result:
    External IP: 202.152.79.3
    External Ports: 59758, 59761, 59765
    CNAT_BADTEST ....... 0
    CNAT_ISFULLCONE .... 0
    CNAT_ISPAT ......... 1
    CNAT_ISPATHOST ..... 1
    CNAT_TRYPRESERVE ... 0
    CNAT_PATINORDER .... 0
    CNAT_BLOCKIP ....... 1
    CNAT_BLOCKPORT ..... 1
    CNAT_LOOPBACK ...... 0
    Chin-Lee-Fuis-MacBook-Pro:~ user$
    Thanks for your kindness and time to help here.
    FUIFUI

  • Nokia Ovi Mail Not Working In C3-00

    I had purchased Nokia C3 last month and updated it to the latest version and using it very well
    but all of a sudden 2 days back Nokia Ovi mail is not working whenever i start it and ry to open any of my accoun (gmail.hotmail,ovi) it keeps on loading for several minutes and then says:-
    Communication Error.Try Again Later
    My all other apps like communities, web opera are working fine,I even formated my phone and get fresh internet setting but nothing works.
    I am Using Airtel Mobile Office
    Plz help me regarding this

    rahul, as per what you have explained it seems a bit unusual issue. You have taken the best recovery measurements step by step. I suggest you take the device to the care Centre as it sems to be a issue with the mail client only.
    Pls click the green star at left if you find my post useful.
    C3-00 V07.20 Devices since 1999 Motorolla A130 ETACS, MicroTAC ETACS, M3788, Accompli 008, C200 Nokia RinGoIII (NHX-7A) ETACS, 7250i, 3210, 5210, 6030, 3230, 2300, 2310, 3110c, 6300 Ericsson KF788 TDMA, A1018s Sony Ericsson K510 Samsung SGH-600, C210, GT-C3200 Blackberry 7130g

  • Bluetooth connection not working on US Nokia phones from J2ME Midlet (MIDP

    Hi All,
    We are developing a J2ME midlet (MIDP 2.0 ,CLDC 1.1)which makes bluetooth connection to other devices.The bluetooth
    connection is working perfectly on indian nokia phones with Airtel as carrier.But when we deploy the same midlet on Nokia E71
    US phone with carrier as AT&T ,the bluetooth connection is not working.The sample code is as follows:
    public void run(){
    try{
    StreamConnection connection = (StreamConnection)Connector.open(btConnectionURL);
    // open an input stream to get some data
    InputStream in = connection.openInputStream();
    byte[] serialData;
    readData = true;
    while(readData == true){
    int lengthavai=0;
    lengthavai = in.available();
    if(lengthavai > 0){
    serialData = new byte[lengthavai];
    int length = in.read(serialData);
    System.out.println("data read: " + new String(serialData));
    dataViewForm.append(new String(serialData));
    in.close();
    connection.close();
    }catch(IOException ioe){
    ioe.printStackTrace();
    when we try to connect on US Phones],the execution hangs at the following line of code:
    StreamConnection connection = (StreamConnection)Connector.open(btConnectionURL);
    No exception is caught.
    Our midlet is not signed.
    In the Forums it is said that the problem is with the unsigned midlet.AS some of the US carriers block the secure API usage
    on Unsigned midlet.
    But our question is, if we buy a code signing certificate from Verisign or Thawte and sign the midlet, will this problem be solved.
    Any other alternative solutions for this ???
    Immediate help will be appreciated.
    Thanks,
    Yash

    You might want to read this before buying a certificate:
    http://javablog.co.uk/2007/08/09/how-midlet-signing-is-killing-j2me/
    It's not my blog, but I pretty much agree with what it says. Unfortunately the network operators can control the access 3rd party trusted certificates have, so even if you sign with Verisign for example, the signed midlet may not have any more privileges than an unsigned midlet, depending on network. They do this so that only midlets signed with one of their own certificates have unrestricted privileges forcing anyone who wants a useful application to buy it from the network instead of downloading an equivalent freeware version from Getjar for example. Some networks are worse than others, so signing your midlet will allow it to work on more phones than an unsigned midlet. I think Verisign have some info on AT&T on their website.
    The whole MIDP specification for security is a joke, IMHO. I don't mind unsigned midlets flashing up a warning once during an application. Writing 20 files, for example, will give 40 security warnings for reading writing data which is ridiculous, as the user obviously either trusts the app or he doesn't. No one runs an app that they only sometimes trust.
    As far as I know the only mobile manufacturer so far to see sense is Sony Ericsson. All of their new phones from Java platform 7 onwards allow unsigned applications access to the file system, bluetooth etc with just one warning when the applications starts.
    Andy

  • IPhone email not working on 3G/4G

    Hi Everyone
    I’m having a problem with accessing email on the IPhones over the 3G/4G network
    The email addresses are setup for IMAP and are put on a mixture of mobile phones however quite  a large amount of them are on the IPhone 4s/5. The IPhones could access the emails without any problems through both wifi and 3G/4G until a few days ago when the 3G stopped working.
    I checked a few things on the email accounts which was ok, Firstly I deleted the email addresses and re added them to IPhone and restarted, no luck, the users who have the IPhones have upgraded to IOS7 but this issue seemed to start before they upgraded, I spoke to EE (the mobile provider) who advised me to speak to Apple who advised to do a network settings reset which did not work and  then they advised doing a full factory reset, which I have not tried yet but that does seem extreme  to access emails over the 3G connection working
    Other phones synch/access the email fine over 3G/4G such as htc’s, samsungs and sony ericssons, and Blackberrys so the server and the settings are ok, we are just having  this problem with the Iphone’s
    Any help is very much appreciated
    Thanks

    I had a similar problem with emails not sending on 3G, which must have started at about the same time, although it took a while to notice as emails were swooshing on send and not reporting any failure. But they weren't getting to people and on closer inspection they weren't going into sent folders. I'm on EE too, with an iPhone 4.
    Anyhow, I found someone saying they had solved a similar problem by ejecting and reinserting the sim, and that's just worked for me.

  • Sony Ericsson W8 is not on

    my mobile sony ericsson w8. is not  on.  no led light, no vibrate, no charge and update back buttion is not work.. pc connecting not detect device...  My phone is dead. please help me?

    Unfortunately it's not possible to repair/update this phone via PC Companion anymore. You could contact your local Xperia support to get information on how to send in the phone to a service center. See my signature for contact info.

Maybe you are looking for