ERM -- unable to determine matching org. level for BRGRU in the system

Hello,
I have a problem.
When I trY to import in the ERM (SAP GRC AC 5.3 SP5) a mass import of roles (derived roles) using the template Organizational Template.
Some of the roles gives me this error:
"Role not imported; unable to determine matching org. level for BRGRU in the system".
In the file I put for example
ZAPVAPINTE BUKRS 0083
Am I doing it right? or do I have to put $BURKS?
Best regards.
Pablo Mortera.

I have found that when you run the background job "syncronization of the organizational values" it pulls the org value name and all "values" assigned to it. If you don't have values specified (on the table level) for the org name, you get this error. We have many fields that we use values for these fields but they aren't specified in the table.
For example: We have the org value "PLVAR" with the values "AL", "01", "02", "03", and "GB" assigned to it. You can actually see these values in the backend system using SE11. We do not get this error on this org value. However, we have another org value "SACHZ" that we use, but we do not have any values assigned to it on the table level, so it is giving us this error. We are trying to find out how to populate the "values" field since this was not done through configuration.
Here are the steps: (1) Go to SE11 in your backend system. (2) Put your org value (example: PLVAR) in the "DATA TYPE" field and click display. (3) Double click on the Domain name. (4) Go to the Value Range Tab and click on the "Value Table" name if there is one. This is the table that has the org values assigned in it - normally done through configuration. (5) go to Utilities --> table contents --> display. (6) execute the table contents. These are the values that the sync job pulls over. If there are no values there or if there is no "values table" name, you get the error. If there are values there, you don't get it.
We are working with our technical team to get the values in these fields to see if that works. Another quick way to see if there are values assigned to the org field is to use "Org Value Mapping" in ERM. Select the "derived org level field" you want to see and click on the "org value from" magnifying glass. If no values are there, a "values table" hasn't been populated in SE11.
It doesn't make much sense to me though because we can still use values for these fields for our derived roles....we just don't populate the table with them.
I'll update this message if we find a solution.
Thanks,
Peggy

Similar Messages

Mass role Import in ERM "unable to determine matching org. level" Error

I am trying to upload the Derived Roles into the ERM. I have already uploaded all the Parents Roles. The volumes of the Derived Roles is huge in my SAP Backend system.
I am not able to understand what should be the content of Org File which we upload. Please correct if I am wrong
1>Example a role Z_TEST_D is derived from Z_TEST on the org levels EKGRP,KOART,GSBER,WERKS.
2>I have run Org Synchronization Job in the ERM
3>Downloaded Z_TEST (Parent Role) and uploaded it into ERM(It was easy because there was no org file)
4> Downloaded Z_TEST_D(Derived Role) through /VIRSA/RE_DNLDROLES Tcode in backend.
5>Downloaded the AGR_1252 information for this role which contained the Org levels and values
6>I put all those information into the Org File and then tried to upload it throws me the error Role Z_TEST_D : not imported; unable to determine matching org. level for WERKSin the system
So I again tried with the another method by changing the input sheet for the Org File
Z_TEST_D BUKRS 0* 9*
Z_TEST_D EKGRP *
Z_TEST_D KOART *
Z_TEST_D GSBER *
Z_TEST_D WERKS *
and tried to upload it again gave me the same error. I have checked the ERM all these Org Levels are fetched into the ERM. I am not sure if I am missing any basic things.
Current Support pack: SP10 Hot Fix 2.
Please share your experience and best practice to upload the roles,

Hello Rahul,
I had that same problem with SP10 also. The way I resolved itand this sounds crazywas to move that WERKS line up one or two rows.
The problem I noticed was not with all derived roles, but when there was a problem, it was always the last line of the Org file for the role that was causing the problem. And the problem was not always WERKS either.
If the next time you run it, the error occurs on the "new" last line (e.g. GSBER), move that line up also. Eventually they all make it in. I have not seen this problem repeated in SP12. Don't delete the line, just shift the order within the number of rows the role has.
P.S. I have several hundred derived roles, about 10 - 15% had this import problem.
-Dylan

Assign patch levels for component versions of system: Maintenance Optimizer

Hello,
I am trying to have Maintenance Optimizer check for what files I need to download. However, I get the following error:
Assign patch levels for component versions of system SXM.
I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
Does something read that information from the child system and populate the data automatically? This is a new system install, and perhaps a step was missed in solman.
Thanks,
John

Hi John,
MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
MOPZ is created to point you to the available Support Package Stacks for its products.
Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
If this is your case, you´ll need to redefine the satellite system again in our solution manager.
hope this helps.
Valdecir

I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.

I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.
Orginally I downloaded OFFICE from the Apple Store App, so unable to reinstall as it suggest.

Which version of Office, 2004, 2008 or 2011
and
MS Office is not available from the App Store, so where did you get it?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?m

I experience similar problem with working in internet. Also use Safari.

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are n

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are none available. How can I update my system to ver 10.8 or newer to accommodate the new banking app?

You can update directly to Yosemite (for free) through the App Store (this is 10.10). Make sure your existing applications will run on this OS.
If you wish to stay at 10.8, you can order this through the online Apple Store (it's $20), and they will email you a redemption code to be used on the App Store.
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Matt

Expire date for user in the system

HI ,
There is a place when we can defined expire date for user in the system ,
something that similar to role that provided to user from 24/02/2010 - 25/02/2010 .
i search in su01 and not found anything .
any idea?
Regards
James

hi james,
i thin k you can do it in su01 logon data tab--->valid through (in validity period).
Hope this will help you.
Thanks,
Tanmaya

I cannot pay for subscription cause the system says the address for the invoice doesn't correspond to my credit card

i cannot pay for subscription cause the system says the address for the invoice doesn't correspond to my credit card. It's not possible, my credit card doesn't correspond to any address

These transactions help Adobe confirm that the credit card used is valid and not reported as lost or stolen. The transaction isn't charged to your account, and once your credit card company verifies it, Adobe removes the charge.
http://helpx.adobe.com/x-productkb/policy-pricing/adobe-stores-online-order-payment-faq.ht ml
You can also contact Adobe Support to place the order.
Regards
Rajshree

Enter rate EUR / USD rate type 00000000 for 8000000100 in the system settin

Can u plz look into my problem. While loading the data through 2LIS_11_VAITM I am getting the following error:
Enter rate EUR / USD rate type 00000000 for 8000000100 in the system settings
I did Transfer exchange rate in RSA1-->source system..
And for information this problem I am facing after upgrading..
Can any body put some light on this
Thanks & Regards..

Hi,
You can maintain exchange rate factors in TCURF table via RSA1>source system>context menu (transfer global settings check only currencies, this updates TCURF table but also updates all currency related tables). You need to check what all tables you need to update. Also you can look into standard program RSIMPCUST to know what all currency tables will be updated.
hope this help.
regards,
Rajesh

Measurment through a vibration sensor interfaced with Ni-PXI is very low & less responsive. I wana know any frequency limitations is there for PXi or the system uses any clipping ckts inside ???

Measurment through a vibration sensor interfaced with Ni-PXI is very low & less responsive. I wana know any frequency limitations is there for PXi or the system uses any clipping ckts inside ???

It would be helpfull to know what PXI hardware and what sensor you are using.
Up to now I only found mechanical limitations ....
(Creating a 100kHz sinus exitation with 160nm amplitude need more than 63km/s² (>6400g) acceleration )
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Impact of creating org level for PERSA

Hi,
I am currently on a HCM project, and have been requested to make personnel area an org level. The security currently is working by Personnel area, with their org structure using location on personnel area, and subarea for region. Because we are not finished with the blueprint stage, i'm hesitant to create this, as the security is working on the testing I have done on the sandbox. Their reasoning is for using derived roles. HCM is only phase 1. So, wouldn't this need to be considered for every new project they implement? If deriving is neccessary, has anyone ever derived on Plan Version? Has anyone ever had problems with creating org levels? Any information would be appreciated, I've looked all over, and just want to make the best recommendation. Thank you.

Hi
I often change PERSA to org level, unless the customer is using structural profiles, as Rainer described just use the report PFCG_ORGFIELD_CREATE, but remember,you need to run this report for all the HR systems in your landscape - the change isn't transported, and if you forget, your role transports will fail.
Regarding the Plan Version org level - I have never seen it used
Regards
Morten

Unable to Create or Extend customers for some of the co_cds

Hi Folks,
We are creating customers for some of the company codes to client org. it has number of company codes. we are able to extend customers Except Italy, Iraq and Nigeria Co_cds. The reason given is that field KNB1_QLAND is not on screen SAPMF02D 0610. This field is for With Holding Tax. Recently we have upgraded to ECC 6.0 version from R/3 4.7. what is cause to not creating customers for some regions.
Please give some needful suggestions.
Thanks
Vinay.

Hi Vinay,
It looks like that in the customization "Assign withholding tax type to company code" in SPRO, subject to w/tx is selected in customer master data section. So, system is expecting the relevant informtaion. Check in Customer account group field status (T. code OBD2), the Withholding tax country field might have been set as suppressed. Check it and correct the same.
BR
Amitash

Should these System Preferences match or is it better that the System sets 'Sharing Prefs' (set-up-name's-macbook-pro.local) and Networking/Advanced/WINS name MACBOOKPRO-****) *=numeric digit or letter

I'm now on another fresh OS reinstall which reverted back to the OEM Mountain Lion 10.8.4 after an upgrade to OS X Mavericks 10.9 When I first thought that the failed OS X upgrade could have been the caused by some conflicting networking settings that I discovered in System Preferences. I tried to match the computer name which I gave at setup which the File Sharing section users i.e. name's-macbook-pro.local with the WORKGROUP name which is generated in the System Preferences/Network Preferences/Advanced WINS section uses MACBOOKPRO-****.
However I am not using a Windows PC at the moment and don't expect to be sharing with anyone else using one so I'm a touch uneasy seeing these SMB WORKGROUP settings being established by the System and realising that these settings are not allowing the Administrator user (me) override as. If I do unlock my Networking Preferences settings to edit the WINS WORKGROUP name which is automatically generated as "MACBOOKPRO-****" whatever I enter reverts back to the settings the System has chosen, if I delete this generated name the default System WORKGROP name is reset even after pressing 'Apply' and locking the Networking Preferences again.
The symptoms which make me uneasy are random visibility of a sharing server named as the first half of my Wi-Fi routers SSID ie: BTHub5 not the random letters and numbers that follow BTHub5-****.
Problems setting up Lexmark and Epson printers. Suggested update from AppStore for Remote Desktop Client, I never purchased Remote Desktop but can see that there is a folder Remote Desktop Management in System/Core Services.
Unexpected permission changes appearing all over the System, example being that the user group 'Wheel' changing to 'Staff' I don't employ people and don't want or need filesharing with other computers.
Lots of System crash reports that mostly are listed as 'Exception Type: EXC_BAD_ACCESS (SIGSEGV)'
Is any of this normal or am I being stalked by a very persistent user? Thanks in advance for any tips you guys can give me.
Cheers

I'm now on another fresh OS reinstall which reverted back to the OEM Mountain Lion 10.8.4 after an upgrade to OS X Mavericks 10.9 When I first thought that the failed OS X upgrade could have been the caused by some conflicting networking settings that I discovered in System Preferences. I tried to match the computer name which I gave at setup which the File Sharing section users i.e. name's-macbook-pro.local with the WORKGROUP name which is generated in the System Preferences/Network Preferences/Advanced WINS section uses MACBOOKPRO-****.
However I am not using a Windows PC at the moment and don't expect to be sharing with anyone else using one so I'm a touch uneasy seeing these SMB WORKGROUP settings being established by the System and realising that these settings are not allowing the Administrator user (me) override as. If I do unlock my Networking Preferences settings to edit the WINS WORKGROUP name which is automatically generated as "MACBOOKPRO-****" whatever I enter reverts back to the settings the System has chosen, if I delete this generated name the default System WORKGROP name is reset even after pressing 'Apply' and locking the Networking Preferences again.
The symptoms which make me uneasy are random visibility of a sharing server named as the first half of my Wi-Fi routers SSID ie: BTHub5 not the random letters and numbers that follow BTHub5-****.
Problems setting up Lexmark and Epson printers. Suggested update from AppStore for Remote Desktop Client, I never purchased Remote Desktop but can see that there is a folder Remote Desktop Management in System/Core Services.
Unexpected permission changes appearing all over the System, example being that the user group 'Wheel' changing to 'Staff' I don't employ people and don't want or need filesharing with other computers.
Lots of System crash reports that mostly are listed as 'Exception Type: EXC_BAD_ACCESS (SIGSEGV)'
Is any of this normal or am I being stalked by a very persistent user? Thanks in advance for any tips you guys can give me.
Cheers

Every time I try to play the video ads for iOS 7, the system crashes and I get a "Safari website quit unexpectedly" message. I have an iMac 23", 3.06 Intel Core 2 duo.

I have an iMac 23", 3.06 Intel Core 2 duo. Whenever I try to play YouTube videos, the system crashes and I get a "Safari quit unexpectedly" message.
I know there are Apple vs YouTube issues, but the same thing happens when I try to play video ads from the Apple site.
The computer is 4 yrs old- this problem started a couple of months ago. No major changes, just updated as available.
Any suggestions....?

I don't have any Safari extensions that I know of. I didn't install any anti-virus.
This is on the error message when it comes up. I went to the WebProcess application in Time Machine and tried to restore it to one year ago, but it didn't fix the problem. As I recall, this began about the time Apple and YouTube parted ways- whether that is coincidence or not...
/System/Library/StagedFrameworks/Safari/Webkit2.framework/WebProcess.app/Content s/MacOS/WebProcess
Thanks for taking the time to look at this. I really appreciate the effort. I'm a amatuer at this, I'm afraid.

ERM -- unable to determine matching org. level for BRGRU in the system

Similar Messages

Maybe you are looking for