ERM5.3 - X Create a valid request

Good day All.
The following error message appears in ERM5.3 when I want to approve a role - X Create a valid request
All the previous steps have been successfully executed.
I think the issue is that the intergration/workflow between CUP and ERM is not working. I have checked and rechecked the Configuring Enterprise Role Management Web Services for Compliant User
Provisioning. It has been configured as per the config doc.
Has anybody experianced this issue and resolved it?
Regards,
Michael Hannie

The resolution is as follows -
1.Activate your number range
2.in CUP > Config > Miscellanous ensure that the RE workflow type (short description ERM) is
http://<server name>:<port number>/AEWFExitServiceWS5_2/Config1?wsdl&style=document_
pan to the left and ensure the Active option is ticked
3.in ERM > Config > Miscellanous > Web Service Info. for AE Workflow ensure that the entry is http://<server name>:<port number>/AEWFRequestSubmissionService5_2/Config1?wsdl&style=document_
Edited by: Michael Hannie on Dec 12, 2008 10:06 AM
Edited by: Michael Hannie on Dec 12, 2008 10:30 AM

Similar Messages

PR no created in SRM : No valid request Found for user 0013

Hi. I try Send PR from ECC6.0 to SRM 7.0
I appobed the PR in BACK end but SC does not created in SRM side.
in transaction SLG1 into SRM show the next message.
No valid requester found for user 0013 .
Previously made the next configurations
1.- IN ECC6.0 has the RFC with USER RFC creates in SRM system i check the connection and working ok.
2.- in PPOMA i created a new node of Unit Orgnizational to Entry channel .
3.- I created a new RFC user and was assigned to previous Unit Organizational
4- created a new local purcharse gruops and assigned the responsability for Entry channel and product categories are introduced.
some idea what is missing to set?

Hi,
Check the below threads
[No valid requester found for user 0013 . BBP_EXTREQ_TRANSFER Posted: Jan;
[No valid requester found for user 0013 . BBP_EXTREQ_TRANSFER;
[BBP_EXTREQ_TRANSFER - No valid requester found for user 0013;
regards,
MRao

No valid requester found for user 0013 . BBP_EXTREQ_TRANSFER Posted: Jan

Hi,
We have a PDP scenario where a channel R/3 has the RFCUSER maintained and the link is established with the ECC6.0.
When we try to send the PR to SRM the message shows the the PR is transferred but gives an error in the SLG1 as
"No valid requester found for user 0013
Message no. BBP_BD002"
The SMQ1 status is ANORETRY
TYPE : A
ID : BBP_EXTREQ
NUMBER : 013
MESSAGE : Ext. requirement cannot be created, see application log.
If you have any solution please tell me,.
i am waiting for reply,
Thanks in advance.

Santosh,
In my recent experience this SLG1 error is usually due to the RFC user being either missing, locked or not having their password set.
Get your Basis person to check the RFC link relevant to the transfer process in TCode SM59.
Hope this helps
Allen Brooks
SRM BPO
Sunderland City Council

Substitution rule created, NO transport request generated automatically?

Hello Everyone..Good day!
Have searched the PS forum, but in vain .. Can anyone suggest why system is not automatically creating a transport request for new substitutions created in IMG as I need to transfer the same to other systems thru transport system with a TR. Should a TR be created manually in this case??? Is this a normal behavior in case of customization for substitutions in PS.
Regards
Murad

Hi Ahmed,
Can you please check SCC4 transaction for know the configuration parameter for No transports allowed is set or not?
such this is the standard behavior in case of OPSI and OPSN validation and substitution. & its client based task to have to do manual in all client system.
why we avoid substitution by transport Request? there are following reason to avoid
1.Class ZV messages are not transportable
2.Repaired objects cannot be included in dev./correction.
Regards,
Sanjeev

Create a validation that runs when a button is pressed

Hi good people from this forum, I was wondering if it's possible to create a validation that runs when a button is pressed.
I'm using Oracle Apex 4.2.2 with Oracle Apex Listener 2.0 and Oracle Database XE 11g
Thank you so much for your time
P.S. On another note, How can I change my display picture =P?

You can create a validation and give it's condition like 'When Button Pressed' and select a button name or select the Condition Type as 'Request=Expression1' and give request(button name) in Expression1.
Thanks
Lakshmi

Error while creating a Travel Request

Hi All,
EP 7,ESS/MSS 1.0
We have a issue in Creating Travel Request in Portal.
Once we fill all the required entries to create a travel request and click the review button it pops a message saying " Errors have been discovered when checking the Expense Report. Please correct them in order to proceed." .
When i check the same in backend using the tcode- TRIP, we are able to create the travel request.
Can some one tell me where we are going wrong and is there any configuration at backend to be done still.
Thanks,
NR

Hi NR
Ensure that all the variant are properly integrated between Travel & Expenses.
Also, for testing, removing the integration and test if the pop-up comes back.
If this helps, pl do reward.
Thanks
Narsimha

Creating a Service Request in metalink

When creating a service request what product do I choose for ODSI? I see no form of ODSI listed, or DPS (although apparently there used to be one). Should I just choose Oracle Data Integrator or Oracle Web Logic? If it helps, I'm using the "new" version of Metalink, not the classic view.

Do you know if this is only available in the classic view of metalink? Perhaps it has something to do with what's supported under our contract or something? I know I sound like an idiot but it's really not available on my list.

[ICSS B2B] Problem when creating a service request due to language

Hi everyone.
We have a web portal based on icss_b2b wich is linked with our backend (CRM).
On the web portal, we should be able to create service requests and it works fine when we are using english.
But if we log using german language, when we try to create a service request we have an error and creation ins't done.
Do we need do to do any configuration in the xcm ? Crm ? to allow to create service request in a new language ?
Thanks for your help.

Hi,
We are facing the same problem, were you able to solve this?
Our Portal takes the language from the browser but we only want to allow people access to ICSS in French and English.
Example:
If browser language = French --> French ICSS
If browser language = English --> English ICSS
If browser language = Dutch --> English ICSS (English = default language)
Many thanks for any feedback.
Cheers,
Geert

How to Create a Validation based on a Z table

I want to create a validation for t-code FB50 so that for any line item that contains a GL Account listed in a table, the validation would then check to see if the field Trading Partner is populated.
My question is How do I set up the validation so that the values in the table are referenced? I don't want to have to continually update the valid GL accounts in a set. I want the table to hold the values. The business users have a custom t-code to update the values in the Z table.
The Z table contains the field HKONT (GL Account). The table contains 1 record (it could contain more) with GL Account 123456.
My attempt was to create a set (Z_TP_ACCTS) that was based on the Z table and the corresponding field. I then set up my validation to compare the value entered in FB50 (BSEG-HKONT) to look at the set. My understanding is that the value would be compared to the values in the table, but my tests are failing. I did not enter any values in the set.
Any advice / help would be appreciated.

Hi
You will have to use an user exit to call up the Z Table to check for your requirement. There are lot of postings on SDN to use an user exit in FI Validations. The standard module pool provided by SAP is RGGBR000 for FI Validations. You can write a form in this.
Additionally you also have the option of using a BTE for this. The one I can recollect are 00001011 or 00001085
Thanks & Regards
Sanil Bhandari

SC error while creating a service request

Hi experts,
I am on SRM 7 , ECS . I am trying to create a service request in the shopping cart through SC full functionality/operational purchaser.
I am getting the error when i clcik on the "supplier/service agents"
SRDBIQCI02
http://srdbiqci02.ssw.local:8010/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
UNCAUGHT_EXCEPTION
Called method not supported by current PDO instance
Method: /SAPSRM/IF_PDO_BO_SC~PRODUCT_CONV_INT of program /SAPSRM/CL_CLL_SER_PDO========CP
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH of program /SAPSRM/CL_CH_WD_DODM_SC_I_SOSCP
Method: WDDOINIT of program /1BCWDY/T2R7E4WKA5D7C8DML3PR==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/T2R7E4WKA5D7C8DML3PR==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
http://srdbiqci02.ssw.local:8010/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
Rgds
Sumendra

Hi Sumendra,
I have the same issue. Did you solve it?
BR,
Ivá

Error in creating a travel request

Hi Experts,
In portal i am trying to create a travel request but it is showing some 'Error during call of fuction module TRIP_WRITE_PERIO'.
Checked this function module in ECC it is not an RFC function could it be the reason?
I am new to EP could help me?
Thanks in advance.

Hi devika,
Yes. The function module should be RFC enabled. Otherwise it will throw this error.
Regards,
Shyam.

Creating credit memo request - V1 498 / missing order quantity

Hi Experts,
could any of You pls help me with a credit memo creation issue?
I credit memo needed to be created based on invoice, so configuration and copy control is done as usual, but I have a failure during CR order creation referring to an invoice F2.
I got an error message: V1 498 - Credit already exist for item... - and no qty is transferred to new document
I have gone thought the threads on Forum, but none of the suggested solution was appropriate to solve the issue:
- the document flow is updated in copy control ,
- I can no remove the schedule line flag at VOV7 - the order qty will be missed but target qty is used, and end up incompletition (VU 019 error messge), so billing is faile
- completition control set as B at VOV7,
Still have the problem
Could any of You pls help me - answers will be appreciated.

V1 498 - Credit already exist for item...
What the above message means is that lines items have already been used as reference for the creation of credit memo request(s).
Create a new sales order, delivery and billing document. Then create credit memo request with reference to this new billing document and test.
In VTAF copy control, at item level, field "Pos./neg. quantity" dictates how the quantity in the source document is affected by copy control.
PS - I tried to create credit memo with reference to billing document (F2), there were no issues there. Therefore I am taking that the issue is with credit memo request (copied with ref to billing document F2)

Error while creating Credit Memo Request for Milestone billing invoice

Hi All,
I have a scenario where i have Milestone billing(% based) at header level in Contracts. I create Invoice for that and then try to create Credit Memo Request with reference to the Invoice.
Problem comes when we try to change the qty in the credit memo request. we are able to change the qty but the value is not changing. It remains the same constant value of that milestone.
In my copy control from Invoice to Credit memo request for the item category i have maintained the pricing type as "C" because i want to copy and manual conditions.
So kindly let me know which config setting should be done so that whenever i change the qty the value should also be changed.
Please Note : This is happening only when my billing plan is at header level. For Billing plan at Item level its working fine.....
Thanks.....

Hiiii.....
Can anyone please advise on the below issue of mine.....
Thanks alot for the help.......in advance

Error when creating a transport request

I have developed a process with GP and now I want to export it by creating a transport request. When I choose my process in the gallery, I get the following messages:
Process "House Connection Request" refers to deprecated version of Callable Object "CO_InputRequest"; deprecated versions cannot be exported
Process "House Connection Request" refers to deprecated version of Action "Input House Connection Request"; deprecated versions cannot be exported
Both the action and its CO exist, but I don't understand why they are deprecated as they are activated and working.
So I deleted them from the process and created them new, but I still get the same error message from above.
Any help is greatly appreciated.
Regards,
Aydin

Hi Experts,
we are currently facing the same issue, that some Guided Procedures processes can not be added to transports, always throwing the same error messages:
Process "xxx" refers to depricated version of Callable Object "zzz"; deprecated versions cannot be exported
Can someone tell us if this is a technical issue or has object xxx been created/modified in the wrong way?
Any help is greatly appreciated.
Thank you very much.
Kind regards,
Jan

Problem while creating credit memo request using BAPI

HI,
I am trying to create credit memo request using the BAPI_SALESDOCU_CREATEFROMDATA1..
I am getting the error as " No customer master data is available for the customer". But the customer exists in the KNA1 table. What is the mistake i hv done.. this s my code..
REPORT ZSV_CREDITMEMO_TEST1.
Data declarations.
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                         WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                         WITH HEADER LINE.
DATA: lt_schedules_ink    TYPE STANDARD TABLE OF bapisdhead1
                         WITH HEADER LINE.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = 'G2'.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = '0001'.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = ''.
headerx-distr_chan = 'X'.
Division
header-division = ''.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
    header-COMPL_DLV = ''.
    header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = '0000C10130'.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = ''.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = 'C20011'.
itemx-material = 'X'.
Plant
item-plant    = ''.
itemx-plant   = 'X'.
Quantity
item-target_qty = '10000'.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = '10000'.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
       EXPORTING
            sales_header_in     = header
            sales_header_inx    = headerx
       IMPORTING
            salesdocument_ex    = v_vbeln
       TABLES
            return              = return
            sales_items_in      = item
            sales_items_inx     = itemx
            sales_schedules_in = lt_schedules_in
            sales_schedules_inx = lt_schedules_inx
            sales_partners      = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
    COMMIT WORK AND WAIT.
    WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
can anyone tell what the error is.?

Hi
please look at code below code this succefully creating credit memo may some help to you
header-doc_type = 'ZS4'.
    PERFORM get_plant.
    headerx-doc_type    = 'X'.
    header-sales_org    = wa_temp1-vkorg.
    headerx-sales_org   = 'X'.
    header-purch_no     = wa_temp1-bstnk.
    header-distr_chan   = wa_temp1-vtweg.
    headerx-distr_chan = 'X'.
    header-division     = wa_temp1-spart.
    header-purch_no_s   = wa_temp1-bstnk.
    headerx-division    = 'X'.
    wa_partner-partn_role = 'AG'.
    wa_partner-partn_numb = wa_temp1-kunnr.
    APPEND wa_partner TO it_partner.
    wa_partner-partn_role = 'WE'.
    wa_partner-partn_numb = wa_temp1-kunnr.
    APPEND wa_partner TO it_partner.
    CLEAR: wa_partner.
    LOOP AT lt_temp2 INTO wa_temp2 WHERE kunnr = wa_temp1-kunnr.
      "AND matnr = wa_temp1-matnr.
*wa_item-itm_number = wa_temp2-posnr .
      wa_item-material   = wa_temp2-matnr.
      wa_item-plant      = wa_temp2-werks.
      wa_item-req_qty    = wa_temp2-fkimg * 1000.
      wa_item-target_qty = wa_temp2-fkimg * 1000.
      APPEND wa_item TO it_item.
    ENDLOOP.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
      EXPORTING
        order_header_in       = header
*   WITHOUT_COMMIT            = ' '
*   CONVERT_PARVW_AUART       = ' '
     IMPORTING
       salesdocument          = v_vbeln
*   SOLD_TO_PARTY             =
*   SHIP_TO_PARTY             =
*   BILLING_PARTY             =
       return                 = return
      TABLES
       order_items_in         = it_item
       order_partners         = it_partner.
    IF v_vbeln <> space.
      wa_vbeln-vbeln = v_vbeln.
      APPEND wa_vbeln TO lt_vbeln.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      HIDE wa_vbeln-vbeln.
      CLEAR: wa_partner,header,v_vbeln, wa_temp2.
      REFRESH: it_partner,it_item.
    ELSE.
*    LOOP AT return .
      it_error-srno = idx.
      it_error-err_msg = return-message.
      APPEND it_error.
*    ENDLOOP.
    ENDIF.
    idx = idx + 1.
ENDLOOP.
Regards

ERM5.3 - X Create a valid request

Similar Messages

Maybe you are looking for