Eroor after ligin - Unable to Recover Previous State

Hi,
I have fresh eBS vision installed on suse 9.0,
1. I logging in to eBS home page
2. I traing to open resposibility and getting error:
'Error: Unable to Recover Previous State
Transaction context has been lost for the page you requested. This error could have been caused by an expired user session or a system failure.'
What does it means, how to avoid this error?
Tnx,
Edgar

Did you re-run all the updates to get your computer back to the point it was at prior to "initilization" (by the way, "initialization" really refers just to formatting a disk and not all the subsequent OS installation, etc. that you did)? It is possible not all components of your applications are in synch with each other. I could easily see this happening with Quicktime and possibly Safari. Text Edit is probably so simple that it is not trying to interact with other components on the computer.
Since Safari and Quicktime are easily available I would just download them and reinstall them.

Similar Messages

Previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

I AM UNABLE TO CONNECT TO ANY WEBSITE USING FIREFOX. EVEN THOUGH, I HAVE BEEN USING FIREFOX ON THE SAME COMPUTER FOR YEARS WITH NO DIFFICULTY. THE PROBLEM AROSE AFTER COMCAST, MY ISP, RECOVERED FROM A WIDESPREAD OUTAGE THAT LASTED 5 HOURS.

I SUCCEEDED IN TRANSFERING ALL MY BOOKMARKS TO GOOGLE CHROME. THIS WILL ALLOW ME ACCESS TO WEBSITES WHILE I WAIT FOR A METHOD TO REPAIR MY FIREFOX PROGRAM. IN A PREVIOUS MESSAGE, I EXPLAINED THAT I WAS UNABLE TO ACCESS ANY WEBSITE USING FIREFOX AFTER COMCAST, MY ISP, RECOVERED FROM AN OUTAGE THAT LASTED 5 HOURS. WHENEVER I TRIED TO CONNECT TO A SITE, A POP-UP MESSAGE APPEARED INDICATING: "UNABLE TO INITIALIZE THE APPLICATION'S SECURITY COMPONENT. THE MOST LIKELY CAUSE IS PROBLEMS WITH FILES IN YOUR APPLICATION'S PROFILE DIRECTORY. CHECK THAT THIS DIRECTORY HAS NO READ/WRITE RESTRICTIONS." I EVEN REMOVED FIREFOX FROM MY COMPUTER AND DOWNLOADED IT AGAIN, FIGURING THAT BY NOT MERELY USING AN UPGRADE, I WOULD BE INSTALLING A COMPLETELY FRESH DOWNLOAD. UNFORTUNATELY, I RECEIVED THE SAME DISAPPOINTING RESULT, WITH THE SAME POP-UP MESSAGE RE-APPEARING. HOWEVER USING BOTH GOOGLE CHROME AND INTERNET EXPLORER, I WAS ABLE TO CONNECT TO WEBSITES. SO I HAVE TO CONCLUDE THAT THE PROBLEM IS NOT WITH MY INTERNET CONNECTION.

Press '''START + R''' in keyboard to open the '''Run''' box(or '''start''' then '''run''') , type in the RUN box '''%APPDATA%''' (or copied in just i wrote, bold text) then click '''OK'''. A Windows Explorer window will appear, in this window, choose '''Mozilla''' then '''Firefox''' then '''Profiles'''. Each folder in the "Profiles" folder (e.g., "xxxxxxxx.default") is a profile on your computer (maybe is one file if you have only one profile).
see for more info : [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile folder - Firefox ]
try it, good luck
thanks again

How to get the previous state of my data after issuing coomit method

How to get the previous state of some date after issuing commit method in entity bean (It should not use any offline storage )

>
Is there any way to get the state apart from using
offline storage ?As I said the caller keeps a copy in memory.
Naturally if it is no longer in memory then that is a problem.
>
and also what do you mean by auditlog?
You keep track of every change to the database by keeping the old data. There are three ways:
1. Each table has a version number/delete flag for each record. A record is never updated nor deleted. Instead a new record is created with a new version number and with the new data.
2. Each table has a duplicate table which has all of the same columns. When the first table is modified the old data is moved to the duplicate table.
3. A single table is used which has columns for 'table', 'field', 'data' and 'activity' (update, delete). When a change is made in any table then this table is updated. This is generally of limited useability due to the difficulty in recovering the data.
All of the above can have a user id, timestamp, and/or additional information which is relevant to the data being changed.
Note that ALL of this is persisted storage.
I am not sure what this really has to do with "offline storage" unless you are using that term to refer to backed up data which is not readily available.

I just bought a MBP after my PC crashed. How do I set up my itunes library on my new Mac? I do not have a backup drive, and I was unable to recover anything from the trashed PC drive. Can the library be rebuilt/restored??

Finally made the switch from PC to Mac, after my PC crashed and burned. I Do not have a backup on an external drive, and I was unable to recover any data from the trashed PC hard drive.
Can I download my library, or is there a way to get my itunes content on my new Macbook Pro? I have almost 10 years of music and stuff on my iTunes, so I really hope there is a fix!
Thanks!

No backup is a huge mistake.
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Apple - Support

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad.

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tried again with no success. Any help would be appreciated

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HP G 42 UNABLE TO RECOVER OLD DATA AND FOLDERS AFTER I RAN RECOVERY TO FACTORY SETTINGS

HP G 42 UNABLE TO RECOVER OLD DATA AND FOLDERS AFTER I RAN RECOVERY TO FACTORY SETTINGS

Factory restore erases everyting on the drive, if you did not back up first, they are gone forever.

HT4061 I keep getting a message and unable to utilize my iPad after returning from a flight, message states iCloud Backup - This iPad hasn't been backed up in 3 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi. Plugged in

Greetings,
Any help would be appreciated.
I keep getting a message and unable to utilize my iPad after returning from a flight, message states iCloud Backup - This iPad hasn't been backed up in 3 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi. Plugged in but it is frozen, I keep pressing OK but nothing happens.
Thank you

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How to view previous state in Camera Raw?

In Photoshop, all of the various image adjustments allow the user to view the previous state of the image, after the sliders are moved. This is very helpful while editing an image. However, I can find no similar ability in Adobe Camera Raw. Is there a way to quickly compare the "before" and "after" of images while editing them in Camera Raw? If so, how? Thank you for your help.

This article may help you CreativeFriday – Before and After preview in Adobe Camera Raw (ACR) in Photoshop CC.

Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170:

Hi all,
I have an Windows XP OS with SP3.
I have installed the Oracle 11g server.
On trying to connect to the ODBC connection, i get the following error message:
Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170: TNS: Connect timeout occured
On trying the tnsping,
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 09-OCT-2
011 13:11:05
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
E:\app\Gautam\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.
5.207)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl))
TNS-12535: TNS:operation timed out
On trying to connect with SQL Developer, i get the following error:
Status: Failure - Test failed: Io Exception: The Network Adapter could not establish the connection
However i am able to connect to the same using SQL Plus
Another issue that occurs is that the Oracle Enterprise Manager shows the following error after a while:
Agent Connection to Instance
Status Failed
Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
The following services are all up during this point of time:
OracleDBConsoleorcl
OracleOraDb11g_home1TNSListener
OracleServiceORCL
Any help in this regard will be very useful as this is hindering the progress of my work.
Thanks in advance for the help.
- Gautam

841683 wrote:
Hi,
I did try and delete my listener.ora and then create a new one..
That did not solve my issue..
What are the steps for configuring the listener again.
Thanks for the response..
- Gautamno listener.ora file is required.
just do as below
lsnrctl start

Unable to Load Bank Statement in ECC 6.0

Hi Guru's,
When using FF_5, Unable to load bank statement for 2007/09/13. Error message Statement 00324 already exists; entry ignored (Message no FB771) (Ticket 855)
2 previous statements were loaded out of sequence, so number 00324 is used up already (system assigned) Accounting says they have posted out of sequence before without a problem. when check on FEBA, and the last time posted out of sequence was statements for Aug 9,7,8,10th. So potentially upgrade related, not certain yet.
We are using BAI format.
Recently we have upgraded from 4.7 to 6.0.
Thanks to all guru's

Dear Kumar,
Please, you delete the statement by program RFEBKA96, however before run this program look the documentation.
Regards,
Paulo

Renderfarm error: Pre-Flight Error: Unable to import previously rendered file

I have an error message I am receiving during network rendering on a renderfarm, and was hoping for some help. The error is this: "Pre-Flight Error: Unable to import previously rendered file."
Here is my setup and some details:
The user makes a comp, and adds it to the render queue set to render as a quicktime movie file. Then they run a script which precomps everything and sets it to render as a image sequence with "Skip existing files" checked. This comp also has a post-render action set to import & replace usage. After this comp is rendered, it gets pulled back into the project and the original render item starts rendering the movie file using the previously rendered image sequence as it's only layer.
This project gets saved to a server where our render nodes are watching the folder. All the render nodes pick up the project and proceed to render the image sequence. Then, after they are done, 1 machine will pick up the second render item and begin rendering the image sequence into the final quicktime movie.
All of this goes smoothly about 90% of the time. However, in some cases an error shows up in the watch folder html page for the 2nd render item (the one converting the image sequence to the movie). The error says "Pre-Flight Error: Unable to import previously rendered file." After the error occurs, no machines will start rendering the project.
My first guess is that the render engine on one machine somehow skips rendering the image sequence comp, and then tries to render the quicktime movie comp and fails because the image sequence has not yet been rendered. However, I can't figure out why After Effects would skip rendering the first comp.
Does anyone have any idea?
Thanks for the help, and let me know if you have any more questions about the setup,
Adam

Well, you should get used to the fact that it's simply gone... Just looking at your screenshot makes me grind my teeth. From delayed writing of files to fragmentation in user folders to Windows doing obscure things this could be anything, but seriously, saving important files on the desktop? That is simply sloppy data management. There is no other way to say it. Read up on what proper file naming, incremental saving and backups are good for and why keeping work files separate and away from your user home directories is actually a quite simple, yet effective concept to avoid exactly that kind of issue.
Mylenium

Sleep occurs before previous statement execution?

Hi Everyone,
I'm writing a simple memory game in java for fun, as well as to learn a little more about java. I want it to work like a normal game of memory. Two cards are flipped, you have a few seconds to look at them provided they aren't a match, and then they flip back over.
So I have the cards in my memory game implemented as an extension of the JButton class. In the ActionListener for these JButtons/Cards, I have created a custom event, which the main program listens for. When a card is flipped, the main program checks to see how many cards are flipped, and if it's two it checks to see if they are matches.
If they aren't matches, it is supposed to wait three seconds and then flip the cards back over. I'm using Thread.sleep(3000), and the problem I'm having is that the application sleeps before it reaches the initial flip of the card. It's supposed to go CardFlipped>>Wait>>FlipBackOverIfNotMatch, but it's going Wait>>CardFlipped>>FlipBackOverIfNotMatch.
So I'm a little confused. The statement to flip the card and show it's contents is definitely before the Thread.Sleep command, but sleep happens first for some strange reason. If I throw in a JOptionPane.showMessageDialog after the statement to flip the card, everything works correctly. It's as if the application is "jumping the gun", and showing a message forces it to finish previous statements before sleeping.
Any Ideas? I could just find another way of doing it, but it bothers me that I can't figure out why this way doesn't work. Thanks in advance,
-Kyle

I don't do GUIs, and you haven't posted code, so I can't be sure of the details, but it sound like the sleep and the flip are in two different threads. You DO want you business logic to be separate from the thread that manipulates the GUI, so don't just go sticking random sleeps in the GUI thread.
If you have, in a single thread,
a();
sleep();
b();
then it will execute in the order you specify, with no surprising behavior.
I can't tell you exactly how to fix this, but I hope this will at least give you an idea of where to look.

All navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included Wikipidia, news(with sub-options LA times, NY times,BBC etc), YouTube, mail & others. how do i recover previous version?

all navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included wikipedia, news(with sub-options LA times, NY times, BBC etc),YouTube, mail & others. how do i recover previous version?

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

Just deleted a program can i restore back to previous state, just deleted a program can i restore back to previous state

just deleted a program can i restore back to previous state,

i havent lost any of my projects thats what i was worred about and wanted to know if i could recover ....
Thanks for all your help guys..........

Eroor after ligin - Unable to Recover Previous State

Similar Messages

Maybe you are looking for