Eror when i m click on sap managment consol
Hi team,
i have one problem,, i have installed IDES version of ECC.5.0 ,, and that was working fine ,but after some day ,, sudanly i facing this eror when i m click on sap managment consol ..
snap-in failed to initialize.
Name:SAP Systems Manager
CLSID:{633547EE-A302-11D1-AE59-080009B07DBB}
And when i m click on OK , than on SAPMMC WINDOW SHOWING THIS EROR
SNAP-in Creation failed
the SNAP -in is not created, it may not be installed properly .
Name:SAP Systems Manager
CLSID:{633547EE-A302-11D1-AE59-080009B07DBB}
Please help me to solve this problem
Regards
Ravinder verma
Edited by: Ravinder verma on May 20, 2011 10:02 AM
Edited by: Ravinder verma on May 20, 2011 10:02 AM
Hello
Check the following articles:
297064 - Error Message "Snap-in Failed to Initialize" When You Use Microsoft Management Console http://support.microsoft.com/default.aspx?scid=kb;en-us;297064&FR=1&PA=1&SD=HSCH305831 - "MMC Snap-In
Failed to Initialize Disk Management Extension" Error Message Starting Disk Management http://support.microsoft.com/default.aspx?scid=kb;en-us;305831&FR=1&PA=1&SD=HSCH
Make sure the following files exist in your system folder (probably C:\Windows\system32). Then, make sure they are all registered.
certmgr.dll
filemgmt.dll
mycomput.dll
If noting else helps and in worse case perhaps re-install of Windows is necessary.
Regards.
Similar Messages
-
SAP Management Console - Remote System Management
When I fire up my SAP Management Console (mmc plugin), I can see my locally installed instance for starting and stopping. Can I use the plugin to manage a remote machine?
Thanks!This machine isn't running R/3, it is only running the Java application server. There is no System > Status which I can find.
When I open the SAPMMC on my local machine, it has the tree:
Console Root
SAP Systems
J2E
bknitter-dt
bknitter-dt 1
bknitter-dt 0
I'm assuming in my case, if someone were to manage this remotely, they would simply put in "bknitter-dt 00" and "bknitter-dt 01" ??
Thanks for the confirmation!
Message was edited by: Brandon Knitter -
Error coming when starting SAP Management Console
Hi
Error is coming when trying to start the Server in Microsoft Management Console . Well this has started coming just now , it was working fine except one point i want to highlight is that on the machine WAS620gui was installed and i upgraded to WAS640 gui , so is it related to with the upgradation of gui ?
The error is :
Snap in failed to initialize |
Name : SAP system Manager |
CLSID {633547EE-A302-11D1-AE59-0800009B07DBB}|Hi
It seems that the registration of the sapmmc.dll failed.
You can recover SAP Management Console again by manually registering the MMC snap-in. Do the following:
Open a CMD.exe and walk through the directory containing the sapmmc.dll file (mostly is under %systemroot%\system32 directory) then execute the following command:
Regsvr32 sapmmc.dll
You should see a message confirmation that registration was successful.
Then start mmc again...it should now work smoothly!
Hope this helps!
Best Regards,
Federico G. Babelis
http://www.gazum.com -
Cannot start BW or HANA instances in SAP Management console
Hi,
I created instance of "SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7". When I'm trying to start SAP BW or SAP HANA instances in "SAP Management console" via remote desktop connection I receive an error message :
"WebService error: 21 The operation timed out" / "The RPC server in unavailable".
Any ideas how to fix this?Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction. -
Sap Management Console tool (NSP is in yellow - dispatcher stopped status)
I have installed SAP ABAP Netweaver 7.03 trial version. I was able to log in through sap logon till day before yesterday. Today When i open sap management console, NSP appears in green initially and then turning to yellow completely. Process List status shows (Disp+Work.Exe) stopped.
How to make NSP to green flag.Hi boss, thanks for your help.....
could u please guide me how can i check database is up and running or not....
one thing, i want to tell you, when i was installation SAP, after oracle installation, i didnot load the oracle patch...becuase when i clicked on that patch, patch itself show error "Data error or corupted"... is it reason also for database which is not running. somebody told me ,,not necessary to upload the patch..anyway, if you have a patch,,please send me....
Oracle version is: oracle 8.1.7
please , i will really gratuful to you..also guide me , how can i check the database is running or not.. -
Restarting J2EE server nodes from Developer Studio Vs SAP Management Consol
Hi,
What makes the difference between restarting server nodes from Dev Studio and SAP Management console.
Please let me know if any documents related to this.
ThanksThanks for your quick reply.
I observed that options for restarting services from Dev Studio are disabled.
Could you please let me know where we need to configure to enable these options when right click on server instances.
Thanks -
SAP Management Console (5NN13 port) does not open in Firefox or IE browser.
Hi ,
Title: SAP Management Console (5NN13 port) does not open in Firefox or IE browser.
Iam not able to see the pop up window SAPMC when i run the following in firefox browser but it works fine in my colleague's computer:
http://hostname:5NN13
I tested the same sap system with this address and it works fine - http://hostname:5NN00
Iam sure that something has to be changed in my browser but dont know what. Please help. Thank you.
Regards,
Mohan.Dear krishna,
even if your thread is closed:
If you get this error in firefox you just have to install java plugin.
Please find documentation [here|http://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox].
Best regards,
Alex
Edited by: Alexander Foerster on Dec 2, 2011 12:44 PM -
Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K -
SAP Management Console : Error : MMC cannot open the file
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP -
Nothin visible under SAP Management console\content root
Hi,
I have installed 2004 sneek preview...It was working fine...But in the last 2 days the IP of the computer in which it was installed changed twice...and now nothing is visible under SAP Management Console->content root...
Could u tell me what could have happened to the system...and a possible way to fix it??
Regards
KrishnaHi,
1) Goto usr\sap\SID\SYS\exe\run\sapstartsrv.exe
2) Click on sapstartsrv.exe
Specify SID, Instance number, sap profile path and click on ok.
Then you can be able to see instance details in MMC
regards,
kanthi -
SAP Management Console and Services
Good morning everyone,
I am trying to understand more about the services used by the SAP System, the order in which they are / need to be started.
First I have a precise question regarding what appears to be, to me, as a discrepancy between the SAP Management Console and The Services Console.
At the moment I have a Server with the SAP System stopped. It shows the correct information in the SAP Management Console but when I look at the Services Console the following services show as started:
SAPOsCol, SAPPRD_00 & SAPPRD_01
SAPCCMSR.01 & SAPCCMSR.11 are set to manual
Has anyone got an explanation on why different info are displayed in both console?
Also, is there a way of checking if the SAP Services are running without going through any interface (Management Console)?
Finally,
In the Services Console the SAPOsCol, SAPPRD_00 & SAPPRD_01 services are set to automatic but when we restart the Server the services do not restart automatically even so they show as starter. Can anyone give me direction on what I need to check or change for these to start properly?
Thank you
CorinneCorinne,
The Services SAPOsCol, SAPPRD_00 & SAPPRD_01 started doesnot mean that SAP is up. So even if you stop SAP through MMC it will show these services as started. These Services denote whether the Instance PRD_00 and PRD_01 are enabled in MMC. So if you stop these services, you wont be able to start SAP through MMC.
SAPCCMSR.01 & SAPCCMSR.11 are set to manual -- These are optional CCMS Agents , so they are set to manual. If you need them you can change them to Automatic
SAPOsCol, SAPPRD_00 & SAPPRD_01 are set to automatic. This should mean that they get strated with the start of OS during a reboot. If they are not getting started there is some issue.
Hope this helps!
Reward points if useful!!!
Cheers!
Bidwan -
Unable to see server nodes in sap management console
I am unable to see servernodes in sap management console.
I am getting error like sapstartsrv.exe-application error ,
"The instruction at " 0x00000000" referenced memory at "0x00000000".The memory couldnot be "written "
click on Ok to terminate the programme.
click on cancel to debug the programme ".
Please advise me how can i see servernodes in the sap management console.
Rewardpoints will be awarded.Hi,
You get back your MMC , please do the following steps.
1. Go to Run and type MMC.
2.Go to file and select add/remove snap in ( alt+m).
3.Click on add
4.Select the SAP system from there.
Save the MMC console which you have created now....This should work fine.
Thanks
Pankaj -
SAP management console doesnt show any instances
Hi,
I installed CE recently and it seemed to be working fine. But today I have been running into trouble with the SAP management console. When I open the SAP management console it shows no instances and is empty. I tried to start the server from SAP Netweaver Composition Environment 7.1 > Application server J01 (CE1) > Start Application Server and it fails also giving me this message
===================================================
============== Starting System CE1 ================
===================================================
=============== Starting database instance ...
>>The requested service has already been started.
>>More help is available by typing NET HELPMSG 2182.
>>The MaxDB Database Starter, Version 7.6.02.09
>>Copyright 2000-2007 by SAP AG
>>OK
>>============== Starting central services instance ...
>>03.07.2007 10:28:20
>>Start
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>03.07.2007 10:28:20
>>StartWait
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>============== Start operation failed !
>>Press any key to continue . . .
And surprisingly I am not able to see any logs for today, The last I can view them for is when I tried to start the application yesterday.
I also tried to go through the composition tool set up again where it could lead me to a screen to start the server , but had no luck , it didnot give me any information about the CE instances at all.
Any help in this regard would be really appreciated it.
Thanks so much
Regards
RoopaHi Roopa,
Follow this...
Execute sapstartsrv.exe from one of the following paths
fill with your system details, select your START profile
from \usr\sap\<SID>\PROFILE\START*, use your Service user and password (your as <hostname>\SAPService<Sid>)
\usr\sap\<sid>\SYS\exe\uc\NTI386
\usr\sap\<SID>\SYS\exe\run
Now Check MMC
Thanks & Regards,
Venkat.
Reward points if useful -
SAP management console not showing AS java
Hello all,
I have made a NW04s installation system test (linux+oracle). I then installed as java add-in EP and BI (AS JAVA, EP CORE, EP, BI JAVA). It was NW04s SR2 with SPC13 and kernel not changed: 700 patch 111.
In the SAP management console there were 3 entries: one for database, one for abap instance and one for java instance.
In the abap instance node I was able to see an entry for "AS java" which was whowing two process (SDM and another one...).
I made a new test installation similar to the previous one and in the SAP management console I do not see any entry for "AS Java". Of course AS java is installed and running !
How can I get SAP management console show "AS java" ????
Thank you
JeanHi Jean,
Start Services.msc from run prompt (if this is windows based installation)
and look for <SID>services, where <SID> is your instance name..
Please do the following and let me know if this of any success
You get back your MMC , please do the following steps.
1. Go to Run and type MMC.
2.Go to file and select add/remove snap in ( alt+m).
3.Click on add
4.Select the SAP system from there.
Save the MMC console which you have created now....This should work fine.
Thanks
Pankaj -
SAP Management console SID missing
Hi,
After restart the operating system, SAP SID is missing in SAP Management console.
Below are the details and steps I tried,
1. Starting the SAP System from the command line u2013 I got the following
message u201CSTARTSAP Continues u2026u201D
2. Oracle is up and running (Can able to start and stop oracle )
3. R3trans -d return code is "000"
4. Installed latest SAP Managent console from "SAP MMC 7.20 -> Windows Server on IA32 32bit"
6. Downloaded and install "NTSCMGR" from "Note 618053 - Download Location for NTSCMGR.EXE".
7. I have checked these note:: 82751 and 0000142100.
When i try adding servie using sapstartsrv.exe -t under /usr/sap/<SID>/SYS/exe/uc/NT1386 am getting the below message
"Cannot install service
Create Service failed:421
The acount name is invalid or does not exist, or the password is invalid for the account name specified"
Please advice on below points,
1. How to add a SAP service in services.msc (SAP<SID>_<NR>)
2. What I have to do bring back the instance in the SAPMMC and continue with my old configuration
System Environment :: This is 32bit IDES server (ECC 6.0 / Oracle 10g) sits in windows server 2k3 service pack 2
Thanks, GaneshHi Orkun,
Please see th output below
E:\WINDOWS\system32>netstat -a
Active Connections
Proto Local Address Foreign Address State
TCP saptest:1031 saptest:1032 ESTABLISHED
TCP saptest:1032 saptest:1031 ESTABLISHED
TCP saptest:1424 saptest:1425 ESTABLISHED
TCP saptest:1425 saptest:1424 ESTABLISHED
TCP saptest:1426 saptest:5939 ESTABLISHED
TCP saptest:5939 saptest:1426 ESTABLISHED
E:\WINDOWS\system32>netstat -a -o
Active Connections
Proto Local Address Foreign Address State PID
TCP saptest:http saptest:0 LISTENING 1420
TCP saptest:epmap saptest:0 LISTENING 680
TCP saptest:https saptest:0 LISTENING 1420
TCP saptest:microsoft-ds saptest:0 LISTENING 4
TCP saptest:1025 saptest:0 LISTENING 432
TCP saptest:1527 saptest:0 LISTENING 1228
TCP saptest:5938 saptest:0 LISTENING 1420
TCP saptest:50113 saptest:0 LISTENING 3036
TCP saptest:netbios-ssn saptest:0 LISTENING 4
TCP saptest:1026 saptest:0 LISTENING 1228
TCP saptest:1031 saptest:1032 ESTABLISHED 1420
TCP saptest:1032 saptest:1031 ESTABLISHED 1420
TCP saptest:1424 saptest:1425 ESTABLISHED 2804
TCP saptest:1425 saptest:1424 ESTABLISHED 2804
TCP saptest:1426 saptest:5939 ESTABLISHED 2804
TCP saptest:5939 saptest:0 LISTENING 1420
TCP saptest:5939 saptest:1426 ESTABLISHED 1420
UDP saptest:microsoft-ds : 4
UDP saptest:isakmp : 432
UDP saptest:ipsec-msft : 432
UDP saptest:ntp : 792
UDP saptest:netbios-ns : 4
UDP saptest:netbios-dgm : 4
UDP saptest:ntp : 792
UDP saptest:1030 : 792
Thanks
Maybe you are looking for
-
My new Mac doesn't recognize my iTunes Match account, asks me to register and pay again
I think the title says it all. I used to have a Mac laptop, using the paid service iTunes Match for less than a year. My computer broke down, so I bought a new Mac, when I log in with my account at the iTunes, it says that I have to pay and register
-
Requesting guidance on repair versus replace for iBook G4 (2005)
I'm looking for some guidance in deciding to upgrade/repair for my iBook G4, operating Mac OS X 10.4.11. I've gotten to the point where I don't seem to be able to run more than one application at a time (for example be online and listen to music at t
-
Cannot change Material Type due to existing DR
Hi All, I tried changing one material by it reflects an existing Delivery for the said material, I checked the DR and found that it was already received - although its Shipment Cost hasn't been transferred. What should be done with these DRs? =)
-
I am not sure if this is a bug, and if it is not, then I suppose this will be a feature request. Background: I am using Lightroom 1.3.1 on a MacBook Pro 2.4 GHz on OS X 10.5.1 with 4GB of RAM. Expectation: When in the Library Module, I'd like to be a
-
How to Reverse Functions Key setting on P55W Satellite
I have a P55W Satellite that I would like to reverse the way the function keys work. I did it once by accident but on reboot it is back to original. How do I get the keys to operate as function not media keys permanently?