Eroracle patchset( 9.2.0.6.0) to Oracle (9.2.0.1.0) on Windows Xp (32 bit)
Hi All,
I am trying to apply oracle patchset( 9.2.0.6.0) to Oracle (9.2.0.1.0) on Windows Xp (32 bit) system. While trying to apply this patch I got a message to shutdown OS services like RPC (Remote Procedure Call), COM3+ System Event which should not happen ideally. As per my experience we can not close down the RPC service, Since this is a critical system service. Have any faced similar problem in the past? If yes, then please let me know.
Thank You.
Hi,
There are two concerns about your upgrade.
Direct upgrade to 11.2.0 is not support from version 9.2.0.6, at least you should be on version 9.2.0.8.
11.2.0.3 is not supported on solris8, at least you should be on OS version - Solaris 10.
Please refer MOS tech notes:
Upgrading to 9i with Standby Database in Place (Doc ID 165296.1)
Upgrading Oracle Database with a Logical Standby Database In Place (Doc ID 437276.1)
Complete Checklist for Manual Upgrades to 11gR2 (Doc ID 837570.1)
How To Upgrade A Primary Database And A Physical Standby To Oracle10gR2 (10.2) (Doc ID 407040.1)
thanks,
X A H E E R
Similar Messages
-
Looking For Patchsets for Oracle 11.2 g for Windows 2003 64 bit
hi,
I suppose I should not be running Oracle on Windows :) i have heard that more than once.
I'm browsing My Oracle Support (support.oracle.com) searching for the correct patchsets for Oracle 11.2 g database Enterprise on Windows Server 2003 64 bit.
All I seem to find is for 11.1
I'm browsing under the 'Patches and Updates' tab in My Oracle Support. Can anyone point me to the downloads for Windows 64 bit and 11.2 please?
Thank you.
JohnDo you by chance mean the 11.2.0.1 release? I don't believe any patchsets for 11.2 have been released yet?
[http://www.oracle.com/technology/software/products/database/oracle11g/112010_win32soft.html ]
Hope this helps!
Eric -
Current patchset for windows 2003 32 bit OS and oracle 10.2.0.4
Hi,
From the Service Marketplace i come to understand that SAP has released only patch collection 8 for windows 32 bit server and oracle 10.2.0.4.
I am currently in patch collection 5.
Please let me know if i need to apply patch 8 or higher.
Regards,
siddhartha.
Edited by: Siddhartha Rabindran on Dec 13, 2008 7:25 AMIt´s advised to have the latest patchset but it´s not required if you have no problems.
Markus -
Patchset 10.2.0.5 (required for Windows 7 64-bit)
Am I right in thinking this isn't freely available - only access route I can find mentioned seems to be via some sort of support contract.
Anyone know why Oracle is restricting access to this when 11 is available?Hi;
Am I right in thinking this isn't freely available - only access route I can find mentioned seems to be via some sort of support contract.Correct, you need valid CSI number to can connect metalink download patch from metalink
Anyone know why Oracle is restricting access to this when 11 is available?Ask this to oracle not us :)
Regard
Helios -
Hello All
I have Oracle EE 11.1.0.7.0 running on Windows 2003 x64 server plus ASM, and I want to apply patch 5, so that it becomes 11.1.0.7.5.
I came to know from Oracle Support Services, Windows patche comes as bundled patchset, but I am not sure which patch to apply, there are 38 of them. Is 11.1.0.7.5P the correct one?.
Patchset Avaialble:
11.1.0.7.0 Patch 38 (11.1.0.7.38P) 32-Bit Patch:11741169 64-Bit (x64) Patch:11741170
11.1.0.7.0 Patch 37 (11.1.0.7.37P) 32-Bit Patch:10636464 64-Bit (x64) Patch:10636465
11.1.0.7.0 Patch 36 (11.1.0.7.36P) 32-Bit Patch:10350787 64-Bit (x64) Patch:10350788
11.1.0.7.0 Patch 35 (11.1.0.7.35P) 32-Bit Patch:10245099 64-Bit (x64) Patch:10245101
11.1.0.7.0 Patch 34 (11.1.0.7.34P) 32-Bit Patch:10168052 64-Bit (x64) Patch:10168056
11.1.0.7.0 Patch 33 (11.1.0.7.33P) 32-Bit Patch:9773817 64-Bit (x64) Patch:9773825
11.1.0.7.0 Patch 32 (11.1.0.7.32P) 32-Bit Patch:9930894 64-Bit (x64) Patch:9930895
11.1.0.7.0 Patch 31 (11.1.0.7.31P) 32-Bit Patch:9846179 64-Bit (x64) Patch:9846180
11.1.0.7.0 Patch 30 (11.1.0.7.30P) 32-Bit Patch:9869911 64-Bit (x64) Patch:9869912
11.1.0.7.0 Patch 29 (11.1.0.7.29P) 32-Bit Patch:9718019 64-Bit (x64) Patch:9718020
11.1.0.7.0 Patch 28 (11.1.0.7.28P) 32-Bit Patch:9707661 64-Bit (x64) Patch:9707665
11.1.0.7.0 Patch 27 (11.1.0.7.27P) 32-Bit Patch:9604444 64-Bit (x64) Patch:9604446
11.1.0.7.0 Patch 26 (11.1.0.7.26P) 32-Bit Patch:9523179 64-Bit (x64) Patch:9523181
11.1.0.7.0 Patch 25 (11.1.0.7.25P) 32-Bit Patch:9392331 64-Bit (x64) Patch:9392335
11.1.0.7.0 Patch 24 (11.1.0.7.24P) 32-Bit Patch:9384493 64-Bit (x64) Patch:9384497
11.1.0.7.0 Patch 23 (11.1.0.7.23P) 32-Bit Patch:9264211 64-Bit (x64) Patch:9264214
11.1.0.7.0 Patch 22 (11.1.0.7.22P) 32-Bit Patch:9166858 64-Bit (x64) Patch:9166861
11.1.0.7.0 Patch 21 (11.1.0.7.21P) 32-Bit Patch:9082702 64-Bit (x64) Patch:9082709
11.1.0.7.0 Patch 20 (11.1.0.7.20P) 32-Bit Patch:9025140 64-Bit (x64) Patch:9025144
11.1.0.7.0 Patch 19 (11.1.0.7.19P) 32-Bit Patch:8928976 64-Bit (x64) Patch:8928977
11.1.0.7.0 Patch 18 (11.1.0.7.18P) 32-Bit Patch:8832980 64-Bit (x64) Patch:8832986
11.1.0.7.0 Patch 17 (11.1.0.7.17P) 32-Bit Patch:8783655 64-Bit (x64) Patch:8783657
11.1.0.7.0 Patch 16 (11.1.0.7.16P) 32-Bit Patch:8689191 64-Bit (x64) Patch:8689199
11.1.0.7.0 Patch 15 (11.1.0.7.15P) 32-Bit Patch:8655458 64-Bit (x64) Patch:8655460
11.1.0.7.0 Patch 14 (11.1.0.7.14P) 32-Bit Patch:8603948 64-Bit (x64) Patch:8603952
11.1.0.7.0 Patch 13 (11.1.0.7.13P) 32-Bit Patch:8553512 64-Bit (x64) Patch:8553515
11.1.0.7.0 Patch 12 (11.1.0.7.12P) 32-Bit Patch:8508245 64-Bit (x64) Patch:8508247
11.1.0.7.0 Patch 11 (11.1.0.7.11P) 32-Bit Patch:8451592 64-Bit (x64) Patch:8451598
11.1.0.7.0 Patch 10 (11.1.0.7.10P) 32-Bit Patch:8416539 64-Bit (x64) Patch:8416540
11.1.0.7.0 Patch 9 (11.1.0.7.9P) 32-Bit Patch:8343061 64-Bit (x64) Patch:8343070
11.1.0.7.0 Patch 8 (11.1.0.7.8P) 32-Bit Patch:8297200 64-Bit (x64) Patch:8297201
11.1.0.7.0 Patch 7 (11.1.0.7.7P) 32-Bit Patch:8260294 64-Bit (x64) Patch:8260301
11.1.0.7.0 Patch 6 (11.1.0.7.6P) 32-Bit Patch:8219259 64-Bit (x64) Patch:8219268
*11.1.0.7.0 Patch 5 (11.1.0.7.5P) 32-Bit Patch:7712568 64-Bit (x64) Patch:7712570*
11.1.0.7.0 Patch 4 (11.1.0.7.4P) 32-Bit Patch:7682184 64-Bit (x64) Patch:7682189
11.1.0.7.0 Patch 3 (11.1.0.7.3P) 32-Bit Patch:7664953 64-Bit (x64) Patch:7675231
11.1.0.7.0 Patch 2 (11.1.0.7.2P) 32-Bit Patch:7586190 64-Bit (x64) Patch:7586195
11.1.0.7.0 Patch 1 (11.1.0.7.1P) Only available in 32-Bit Patch:7540527
Any help would be great.
Regards
AmitHi All
I have applied this patch 38 for Oracle 11.1.0.7.0 on Windows 2003 x64 bit server today but the database version from v$version didn't change at all and still its showing 11.1.0.7.0, I expected it to show 11.1.0.7.5.
Any suggestions.
Regards
Amit -
Downloading and installing Oracle (with sql plus) on Windows 7 Professional
Hi,
I got a new laptop which has Windows 7 Professional (64 bit). I intend to download Oracle 10g and would like to install bothe the database and the sql plus in this system.
I would appreciate if somebody could provide me a link to the appropriate database (with sql plus installation capability). Also if available the installation guide.
Thanks in advance.Hello,
Windows 7 Professional (64 bit). I intend to download Oracle 10g and would like to install bothe the database and the sql plusOracle *10g* is not certified on Windows *7*, except with the latest patchset *10.2.0.5*, and its Premium Support ended on the *31st of July 2010*.
You should download Oracle *11.2* which is certified on Windows *7 - 64 bit*.
You'll find the Documentation and Download tabs on the link below:
http://www.oracle.com/technetwork/database/enterprise-edition/overview/index.html
About SQLPlus, it's delivered with Oracle Server and, in *11g*, you can still use it from a DOS box. If you intend to have a Graphical Tool, you should use Oracle SQL Developer instead:
http://www.oracle.com/technetwork/developer-tools/sql-developer/overview/index.html
Hope this help.
Best regards,
Jean-Valentin -
Error while applying patchset 11.1.0.7 to 11.1.0.6
Hi, I am a new DBA and would appreciate any help on this.
I am in the process of upgrading my database from 10.2.0.4 to 11.1.0.7. I installed 11.1.0.6 and was applying the 11.1.0.7 patch. I installed the 11g patchset successfully and was working on 'Upgrading Oracle Database 11g Release 11.1.0.6 to Oracle Database 11g Release 11.1.0.7' - Section 9.2 of the readme of the 11.1.0.7 patchset. After starting the dbua and selecting the 11g home that needed to be upgraded, the dbua gave the error -
The upgrade Assistant failed in bringing up the database proddb1. Oracle Home /opt/oracle/product/11.1.0/dev obtained from file /etc/oratab was used to connect to the database. Either the database is not running from Oracle Home /opt/oracle/product/11.1.0/dev or the pfile /oravol00/oracle/product/11.1.0/dev/dbs/init.ora used is incorrect. Correct the error and run the Upgrade Assistant again.
Here are some more details about my system - I have a 10g dev instance and a 10g production instance also running on the same box. The 11g instance location is /oravol00/opt/oracle/product/11.1.0/dev and has a soft link to /opt/oracle/product/11.1.0/dev.
I read another thread on the OTN where another person had the same problem and was asked to start the database in the upgrade mode from sqlplus and then try the dbua again. I tried that - started the databse in startup upgrade mode and it gave me this error -
SQL> startup upgrade;
ORACLE instance started.
Total System Global Area 1.0088E+10 bytes
Fixed Size 2162320 bytes
Variable Size 5502927216 bytes
Database Buffers 4563402752 bytes
Redo Buffers 19697664 bytes
ORA-03113: end-of-file on communication channel
Process ID: 19677
Session ID: 170 Serial number: 3
Can someone please give me some clue on what I did wrong here and how to correct it? Any help is appreciated.
Edited by: user12158503 on Mar 12, 2010 7:47 PMI checked my alert log and see errors from the day I installed the 11g instance. When DBUA said the installation is complete, I thought everything went fine. But now I see alert log had errors since then. I created the database on March 12th and tried to install the 11.1.0.7 patch on March 14th by around 3pm. Here is more clarification on the upgrade. I am trying to upgrade my dev environment. I plan to upgrade using export/import. For this I created the 11g instance and am applying the 11.1.07 patch. Next, I need to apply the PSU patch and then do the upgrade.
I am pasting the alert log errors here. Please advice on what I need to do.
I see these errors from the day I created the database -
alter database "progdev" open resetlogs
RESETLOGS after incomplete recovery UNTIL CHANGE 844220
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_ora_29547.trc:
z00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/oravol00/oradata/progdev/redo01.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
2010-03-11 14:23:24.757000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_ora_29547.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/oravol00/oradata/progdev/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
2010-03-11 14:23:27.729000 -06:00
And these from when I tried to do the patch install -
Shutting down instance (immediate)
License high water mark = 71
ORA-1089 : opidrv aborting process unknown ospid (1452_47151230037104)
2010-03-12 16:20:31.653000 -06:00
All dispatchers and shared servers shutdown
2010-03-12 16:20:33.732000 -06:00
ALTER DATABASE CLOSE NORMAL
SMON: disabling tx recovery
SMON: disabling cache recovery
2010-03-12 16:20:34.730000 -06:00
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 4
Successful close of redo thread 1
2010-03-12 16:20:48.060000 -06:00
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
2010-03-12 16:20:49.267000 -06:00
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Stopping background process VKTM:
2010-03-12 16:20:58.416000 -06:00
System State dumped to trace file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_ora_10281.trc
2010-03-12 16:20:59.757000 -06:00
Instance shutdown complete
2010-03-12 17:03:02.814000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 17:03:04.837000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 3
2010-03-12 17:03:08.261000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=26304
VKTM started with pid=3, OS id=26306 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=26310
DBRM started with pid=5, OS id=26312
PSP0 started with pid=6, OS id=26314
DIA0 started with pid=7, OS id=26316
MMAN started with pid=8, OS id=26318
DBW0 started with pid=9, OS id=26320
DBW1 started with pid=10, OS id=26322
LGWR started with pid=11, OS id=26324
CKPT started with pid=12, OS id=26326
SMON started with pid=13, OS id=26328
RECO started with pid=14, OS id=26330
MMON started with pid=15, OS id=26332
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=26334
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
ALTER DATABASE MOUNT
2010-03-12 17:03:12.994000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_26318.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 26318): terminating the instance due to error 27103
ORA-1092 : opitsk aborting process
Instance terminated by MMAN, pid = 26318
2010-03-12 17:12:46.811000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 17:12:48.769000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
2010-03-12 17:12:51.909000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=28723
VKTM started with pid=3, OS id=28725 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=28729
DBRM started with pid=5, OS id=28731
PSP0 started with pid=6, OS id=28733
DIA0 started with pid=7, OS id=28735
MMAN started with pid=8, OS id=28737
DBW0 started with pid=9, OS id=28739
DBW1 started with pid=10, OS id=28741
LGWR started with pid=11, OS id=28743
CKPT started with pid=12, OS id=28745
SMON started with pid=13, OS id=28747
RECO started with pid=14, OS id=28749
MMON started with pid=15, OS id=28751
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=28753
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
ALTER DATABASE MOUNT
2010-03-12 17:12:55.989000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_28737.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 28737): terminating the instance due to error 27103
ORA-1092 : opitsk aborting process
Instance terminated by MMAN, pid = 28737
2010-03-12 21:09:24.016000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 21:09:25.986000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
2010-03-12 21:09:29.084000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=19640
VKTM started with pid=3, OS id=19642 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=19646
DBRM started with pid=5, OS id=19648
PSP0 started with pid=6, OS id=19650
DIA0 started with pid=7, OS id=19652
MMAN started with pid=8, OS id=19654
DBW0 started with pid=9, OS id=19657
DBW1 started with pid=10, OS id=19659
LGWR started with pid=11, OS id=19661
CKPT started with pid=12, OS id=19663
SMON started with pid=13, OS id=19665
RECO started with pid=14, OS id=19667
MMON started with pid=15, OS id=19669
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=19671
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
ALTER DATABASE MOUNT
2010-03-12 21:09:33.214000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_19654.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 19654): terminating the instance due to error 27103
2010-03-12 21:09:34.222000 -06:00
Instance terminated by MMAN, pid = 19654
2010-03-12 21:10:15.072000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 21:10:17.067000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
2010-03-12 21:10:20.227000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=20310
VKTM started with pid=3, OS id=20312 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=20316
DBRM started with pid=5, OS id=20318
PSP0 started with pid=6, OS id=20320
DIA0 started with pid=7, OS id=20322
MMAN started with pid=8, OS id=20324
DBW0 started with pid=9, OS id=20326
DBW1 started with pid=10, OS id=20328
LGWR started with pid=11, OS id=20330
CKPT started with pid=12, OS id=20332
SMON started with pid=13, OS id=20334
RECO started with pid=14, OS id=20336
MMON started with pid=15, OS id=20338
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=20340
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
ALTER DATABASE MOUNT
2010-03-12 21:10:24.263000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_20324.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 20324): terminating the instance due to error 27103
ORA-1092 : opitsk aborting process
Instance terminated by MMAN, pid = 20324
2010-03-12 22:02:04.524000 -06:00
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Starting ORACLE instance (normal)
2010-03-12 22:02:06.715000 -06:00
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
2010-03-12 22:02:10.003000 -06:00
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile /opt/oracle/product/11.1.0/dev/dbs/spfileprogdev.ora
System parameters with non-default values:
processes = 150
memory_target = 9664M
control_files = "/oravol00/oradata/progdev/control01.ctl"
control_files = "/oravol00/oradata/progdev/control02.ctl"
control_files = "/oravol00/oradata/progdev/control03.ctl"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "/opt/oracle/flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=progdevXDB)"
audit_file_dest = "/opt/oracle/admin/progdev/adump"
audit_trail = "DB"
db_name = "progdev"
open_cursors = 300
diagnostic_dest = "/opt/oracle"
PMON started with pid=2, OS id=32493
VKTM started with pid=3, OS id=32495 at elevated priority
VKTM running at (20)ms precision
DIAG started with pid=4, OS id=32499
DBRM started with pid=5, OS id=32501
PSP0 started with pid=6, OS id=32503
DIA0 started with pid=7, OS id=32505
MMAN started with pid=8, OS id=32507
DBW0 started with pid=9, OS id=32509
DBW1 started with pid=10, OS id=32511
LGWR started with pid=11, OS id=32513
CKPT started with pid=12, OS id=32515
SMON started with pid=13, OS id=32517
RECO started with pid=14, OS id=32519
MMON started with pid=15, OS id=32521
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=16, OS id=32523
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /opt/oracle
2010-03-12 22:02:11.216000 -06:00
ALTER DATABASE MOUNT
2010-03-12 22:02:14.385000 -06:00
Errors in file /opt/oracle/diag/rdbms/progdev/progdev/trace/progdev_mman_32507.trc:
ORA-27103: internal error
Linux-x86_64 Error: 17: File exists
Additional information: -1
Additional information: 1
MMAN (ospid: 32507): terminating the instance due to error 27103
ORA-1092 : opitsk aborting process
Instance terminated by MMAN, pid = 32507
oracle@<progdev>:/home/oracle $
Thanks,
Anu -
Oracle BPM Suite 11.1.1.4 (Patchset 3) is available
Oracle BPM Suite 11.1.1.4 (Patchset 3) is available at - http://www.oracle.com/technetwork/middleware/bpm/downloads/downloads-097443.html
It requires WLS 10.3.4 - http://www.oracle.com/technetwork/middleware/downloads/index.html
Dan
Edited by: Daniel Atwood on Jan 21, 2011 6:46 AMThank you Dan!
I have a question. I have been trying to download the generic installers (since I want to install on a 64 bit Linux). The thing is I cannot find the RCU generic (there is one for Win and another one for Linux). Any idea where can this be downloaded?
On a different topic, here I am sharing the BPM 11.1.1.4 Installer guide that has been released recently:
http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf
That link is available from this page (just in case they change it):
http://www.oracle.com/technetwork/middleware/soasuite/overview/index.html
Regards,
Gus -
When is the Oracle 10.1.0.4 patchset available?
Hi,
Can someone tell me when the 10.1.0.4 patchset will be available please?
Cheers,
WarrenThe first release, for Linux and Windows, was supposed to be on March 11, but it's still not out and they've clammed up about a new release date.
I can understand a schedule-slip, but they should have some idea of a new release date, you'd think.
This is the (obsolete) tentative schedule we got from Oracle support:
Intel Linux : March 11' 2005
MS WIndows NT : March 11 '2005
MS Windows 64bit : March 21 '2005
MS Windows Server 2003 : March 11 '2005
MS Windows XP : March 11 '2005
MS Windows XP 64 Bit : MArch 21 '2005
Sun Spark Solaris 64 Bit : March 25 '2005
Sun Solaris V2 Intel : April 11 '2005 -
When is Oracle 10.1.0.4 patchset available?
Hi,
Can someone tell me when the 10.1.0.4 patchset will be available please?
Cheers,
WarrenThe first release, for Linux and Windows, was supposed to be on March 11, but it's still not out and they've clammed up about a new release date.
I can understand a schedule-slip, but they should have some idea of a new release date, you'd think.
This is the (obsolete) tentative schedule we got from Oracle support:
Intel Linux : March 11' 2005
MS WIndows NT : March 11 '2005
MS Windows 64bit : March 21 '2005
MS Windows Server 2003 : March 11 '2005
MS Windows XP : March 11 '2005
MS Windows XP 64 Bit : MArch 21 '2005
Sun Spark Solaris 64 Bit : March 25 '2005
Sun Solaris V2 Intel : April 11 '2005 -
9.2.0.3 patchset on RH9
Has anyone been able to apply the 9.2.0.3 patchset to a 9.2.0.1 Oracle database server on RH9? The 9.2.0.1 server was working fine until after I ran catpatch.sql. Then it started giving me a lot of the following error messages:
ORA-00604: error occurred at recursive SQL level 1
ORA-04045: errors during recompilation/revalidation of <some package name>
ORA-06508: PL/SQL: could not find program unit being called ORA-06512: at line 2
This would happen whenever I access any system or user defined package.
Also, anyone knows how I can check the value of an environment variable (LD_ASSUME_KERNEL) in the environment in which the Oracle database server is running? I know how to set the env variable in a shell and then use the shell to run a client app. But I want to make sure the server processes are also running in an environment with this variable set correctly.
Thanks,
DaveHi Stefan,
Exactly which Java component did the installation stop at, and if you go to the end of the install log (install log is in oraInventory/logs directory, it's named installActions<date>.log), what does it say?
If you forgot to set LD_ASSUME_KERNEL to "2.4.1", the installer will stop right at the beginning when it starts copying files. This is because although the installer is a Java app, it calls native shared libraries via JNI to perform OS operations like copying files or changing file permissions. Those shared libraries were compiled against an earlier version of glibc.
The only places where relinking stopped for me were at oemagent and at a ctx agent. The ctx agent has a fix which is well known. The oemagent cannot be fixed without hacking glibc source code and recompiling I think. I haven't had time to try that yet.
Cheers,
Dave -
Where can I download the patchsets.sh ftp site is not working
Hi Hussein
the ftp site for the patchsets.sh is not working.
ftp://ftp.oracle.com/support/outgoing/PATCHSET_COMPARE_TOOL/patchsets.sh
thanks
Reddyhsawwan wrote:
schavali wrote:
Ensure that FTP service on your server is running and that the FTP port has not been blocked by security rules or software.This is Oracle FTP server, and it has nothing to do with the FTP service on the server. Just like downloading the file from a client machine.
Thanks,
HusseinTrue - I am talking about the FTP service on the OP's server/network. If the FTP service or port is blocked by security rules or software, then connection to the Oracle FTP site will appear to hang.
Srini -
Installing Oracle, patchset and CPU
I am building a new oracle server (Windows 2003 64-bit R2 SP2). I will be installing oracle 10.2 64-bit and patchset 10.2.0.4. Can you please let me know whether I can ialso nstall the latest oracle CPU before creating any database on the server?
Regardsvkidambi wrote:
I am building a new oracle server (Windows 2003 64-bit R2 SP2). I will be installing oracle 10.2 64-bit and patchset 10.2.0.4. Can you please let me know whether I can ialso nstall the latest oracle CPU before creating any database on the server?
RegardsAs others have said, given the choice you should definitely apply all available patchets (esp cpu) before creating any databases. But let me point out one thing. If you use dbca to create your database, and you chose one of the pre-defined templates, dbca will actually create the database from a pre-created standard backup. That backup will be of a database from the base level installation, which would then require picking up the patch instructions from the point of beginning to update the database dictionary. If you tell dbca to create a 'custom' database, it will create a db from scratch, using the CREATE DATABASE command, so will be created with all appilied patches available. As a learning exercise, I'd recommend that before you create any databases with this new installation, you walk through dbca twice, once selecting a pre-defined db, and once selecting for 'custom'. On both times, when you get to the end, do not select to create the database, but do select to create the scripts. Then get a cup of coffee, sit down and study both sets of scripts. After that, you'll know what course of action to take. -
Where Can I download oracle8.0.5 patchset?
Where Can I download oracle8.0.5 patchset? I can't login ftp.oracle.com, oracle-ftp.oracle.com have nothing.
metalink.oracle.com
but you need a support contact for it.
BTW: 8.0.5 is de-supported -
PATCHSET 적용 후 실행파일의 배너가 'STANDARD'에서 'ENTERPRISE'로 변경됨
제품 : ORACLE SERVER
작성날짜 : 2004-08-30
PATCHSET 적용 후 실행파일의 배너가 'STANDARD'에서 'ENTERPRISE'로 변경됨
======================================================
Problem Description
8i나 9i "Standard Edition"에 Patchset을 적용 하면, sqlplus 같은 실행파일의
배너가 "Enterprise Edition"으로 보여지면서 시작이 된다.
Change(s)
~~~~~~~~~~
Oracle Server가 Standard Edition에서 Enterprise Edition으로 변경이 된다.
Cause
~~~~~~~
Patchset이 라이브러리 libvsn8.a (8i) 나 libvsn9.a (9i) 파일을 대체하고
이것이 v$version의 배너를 변경한다.
Solution Description:
8.1.7의 경우 다음의 작업을 실행한다:
1) 817 설치 CD에서 stdlib.0.0.jar 파일을 찾는다.
"stage/Components/oracle.rsf.rdbms_rsf/8.1.7.0.0/1/DataFiles/stdlib.0.0.jar"
9.0.1의 경우
"stage/Components/oracle.rsf.rdbms_rsf/9.0.1.0.0/1/DataFiles/stdlib.0.0.jar"
2) 이 파일을 디스크로 복사한 후 다음의 명령으로 libvsn_std8.a 파일을 추출한다.
$ jar -xvf stdlib.0.0.jar
3) libvsn_std8.a (8i) 나 libvsn_std9.a (9i) 파일을 $ORACLE_HOME/lib 으로
복사하고 libvsn8.a (8i) 나 libvsn9.a (9i)로 이름을 변경한다.
$ cp ./libvsn_std8.a $ORACLE_HOME/lib/libvsn8.a
9.0.1의 경우
$ cp ./libvsn_std9.a $ORACLE_HOME/lib/libvsn9.a
4) Oracle 실행파일들을 Relink 하고 배너를 확인한다.
$ relink all
Reference Ducumment
<Note:219233.1> Executables' Banner Change from Standard to Enterprise
Edition After a Patchset Install
Maybe you are looking for
-
FBCJ BADI/User Exit or Validation Rule Implementation
Inspite of my maintaining validation as under, i am not able to achieve what i desire, i.e., System is still posting Cash transactions thru FBCJ t code for amount exceeding INR 50,000 1. Created a validation name 2. Assigned it to Application Area -
-
I am trying to connect my Macbook Pro to an old analog TV. I have a digital to analog signal converter and am sending signal via VGA to a composit video cable, everything seems to work fine. The TV is detected by the laptop, I can see the picture fli
-
Hi, I want a code in jsp or javascript for selecting combo box value and it is assigned to another variable. Example: If combo box value is Number, it is assigned to 0. If como box value is Name, it is assigned to 1.
-
Disc not ejected properly message...
Can anyone help, since updating OSX from Lion to Maverick on my MacBook now i cant open files on my CF card thats connected via a USB 3.0 Kingston Card Reader. Wether i try to open in Adobe Camera Raw, Canon DPP or just Finder i get the same result w
-
How to display images [Local Path] of JSP in firefox?
Hi, I have been facing this problem so long. I have tried every possible option available on the net. like changing '\' to '/' and give complete path like 'file:///D:/images/image.gif' etc. but still facing the same problem. Its shows the image perfe