Erorr while doing the portal postinstallation

Hi
While doing the post installtion activities for portal server
i logged with user administrator
http://hostname:portno/nwa
i have got this error.
Validation Error: Communication with the CMS failed. Ensure that the URL is correct, that the CMS is up an running, and that the given user has administrative access rights for the CMS[ HTTP response "Not Found" from CMS server.
Rao.

Hi
THanks for reply
Just now I started the installtion wat u told to install inthat way i have selected ASJAVA,EP,EPcore only.
Actully my need is i have to give this ep server to development team for ESS/MSS only.
Do i need to install NWDI in developer sytem.
I have some doubt on this .
and can u tell me how to proceed to do configuration for SLD.
I have selected SLD as solution manager while installation of solution manger.
IN ep I selecetd the existing sld as solution manager hostname.
Can u tell me how to configure SLD.
As u told n o need to do any post installation in EP7.0.
Regards
Rao.

Similar Messages

IM Login problem Error while doing the search

Hi people,
I'm facing some strange behaviour with login for a couple of users, I have users that don't have problems to login and I have user that can't login, I'm sure that all of them are valid because they're login to Portal Server, and then launch the IMClient using SSO, users that can achieved the login can't found users that can't login using the "add contact" button of the IMClient.
In the javaws console I'm seeing this exceptions when a user can't login:
30 Oct 2007 14:02:18,898] [xmpp] [javawsApplicationMain] org.netbeans.lib.collab.CollaborationException: Error while doing the search
org.netbeans.lib.collab.CollaborationException: Error while doing the search
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getUserAttributes(XMPPPersonalStoreService.java:1211)
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getPrivateQuery(XMPPPersonalStoreService.java:1289)
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.getProfile(XMPPPersonalStoreService.java:419)
     at com.sun.im.service.xmpp.XMPPPersonalStoreService.getProfile(XMPPPersonalStoreService.java:240)
     at com.iplanet.im.client.manager.CurrentUserManager.getCurrentProfile(CurrentUserManager.java:350)
     at com.iplanet.im.client.manager.Manager.login(Manager.java:1255)
     at com.iplanet.im.client.swing.login.DefaultLoginDialog.login(DefaultLoginDialog.java:550)
     at com.iplanet.im.client.swing.login.DefaultLoginDialog.connect(DefaultLoginDialog.java:540)
     at com.iplanet.im.client.iIM.startLogon(iIM.java:464)
     at com.iplanet.im.client.iIM.init(iIM.java:203)
     at com.iplanet.im.client.iIM.main(iIM.java:950)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.javaws.Launcher.executeApplication(Launcher.java:1171)
     at com.sun.javaws.Launcher.executeMainClass(Launcher.java:1118)
     at com.sun.javaws.Launcher.continueLaunch(Launcher.java:961)
     at com.sun.javaws.Launcher.handleApplicationDesc(Launcher.java:515)
     at com.sun.javaws.Launcher.handleLaunchFile(Launcher.java:218)
     at com.sun.javaws.Launcher.run(Launcher.java:165)
     at java.lang.Thread.run(Thread.java:595)
/home/lalo/.sunmsgr/mx_m53852_latam_int_bbvabancomer_com_mx/messages/scripts/scripts.txt
[SafeResourceBundle] Missing resource key: iIMFrame_title
[Fatal Error] :1:2908: The element type "body" must be terminated by the matching end-tag "</body>".
com.sun.im.service.CollaborationException: org.netbeans.lib.collab.CollaborationException: Error while doing the search
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at com.sun.im.service.util.ReflectUtil.getDelegatorObject(ReflectUtil.java:27)
     at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:179)
     at com.iplanet.im.client.manager.UserCache.getPrincipal(UserCache.java:161)
     at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
     at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
     at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
     at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
     at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
     at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
     at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
     at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
     at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
     at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
     at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: org.netbeans.lib.collab.CollaborationException: Error while doing the search
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
     at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:171)
     ... 19 more
[Fatal Error] :1:2908: The element type "body" must be terminated by the matching end-tag "</body>".
com.sun.im.service.CollaborationException: org.netbeans.lib.collab.CollaborationException: Error while doing the search
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at com.sun.im.service.util.ReflectUtil.getDelegatorObject(ReflectUtil.java:27)
     at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:179)
     at com.iplanet.im.client.manager.UserCache.getPrincipal(UserCache.java:161)
     at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
     at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
     at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
     at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
     at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
     at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
     at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
     at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
     at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
     at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
     at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: org.netbeans.lib.collab.CollaborationException: Error while doing the search
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:330)
     at org.netbeans.lib.collab.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:262)
     at com.sun.im.service.xmpp.XMPPPersonalStoreService.searchPrincipals(XMPPPersonalStoreService.java:171)
     ... 19 more
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
     at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:977)
     at com.iplanet.im.client.manager.BuddyListManager.addBuddyListGroupMember(BuddyListManager.java:938)
     at com.iplanet.im.client.manager.BuddyListManager.loadBuddyListNow(BuddyListManager.java:430)
     at com.iplanet.im.client.manager.BuddyListManager.init(BuddyListManager.java:200)
     at com.iplanet.im.client.swing.communicator.Communicator.<init>(Communicator.java:316)
     at com.iplanet.im.client.swing.BuddyList.showBuddyList(BuddyList.java:187)
     at com.iplanet.im.client.iIM.showBuddyList(iIM.java:1105)
     at com.iplanet.im.client.swing.Client.openNetlertViews(Client.java:379)
     at com.iplanet.im.client.swing.Client.showViews(Client.java:150)
     at com.iplanet.im.client.iIM.loadNetLert(iIM.java:613)
     at com.iplanet.im.client.swing.login.DefaultLoginDialog$1.run(DefaultLoginDialog.java:610)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)All of the users are under the same ldap branch, and previously I ran the command: /opt/SUNWiim/sbin/imadmin assign_services, for that ldap branch.
Any suggestion? Thanks in advance....

Finally we found the cause of the problems, for an strange reason if the user has the character '�' in his 'cn' o 'sn' he can't login, for example:
bash-3.00# ldapsearch -x -h ldap -p 389 -b "c=mx,o=isp" -D "cn=DirectoryManager" -w password "cn=mx.m524217" cn sn uid
version: 1
dn: cn=mx.m524217, ou=people, c=mx, o=isp
uid: m524217
sn: VERA TREVI�O
cn: mx.m524217
When a user login to IM made a search of users if he search a user that can't login that search doesn't found nothing and the exception I posted before appears in the javaws console.
But this only happened while we are using the gateway, if we point to the IM multiplexor directly we don't have all of this problems.
Regards..

Error While doing the Asset Credit Memo -ABGL

HI,
While doing the Asset Credit Memo -ABGL,i am getting the below error.Kindly help me with your inputs.
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 406000000004-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
Thanks
Supriya

Check your config in OABN / OADB
The depriciation area 01 can allow you post values only postive .. in OADB
it has maintained Acquisition values Postive or zero values and net book
values has miantained Postive or 0 values. so based on this setting u cannt
post any negative values for this asset.

Error while doing the Usage Decision in transaction QA32

Hello Friends,
While doing the goods receipt for customer returns from customer, system generated a inspection lot with inspection type 06.
So in QA32 transaction, system is showing that inspection lot, but in same screen, against the column InspPlan: Material, system is not showing any entry.
Later on after analysis, i found that no inspection plan was assinged to the material, Plant for which that inspection lot was created. When i checked that inpection lot in transaction QA03, in Insp. Specifications tab, agaisnt the Assigned Specification section, system was not showing any entry in fields Group, Group Counter, Plant, Usage.
And against that inspection lot,status CRTD, PREQ, CHCR are active.
Because of which, when user is trying to do the UD against this lot system throwing the error message as Status check error.
When i checked again i found that status CRTD is throwing the error message.
Hence friend, i want to do the Usage decision for that inspection lot than how to do?
Now user has assigned the material, plant to the inspection plan in QP02.
Should i go to QA02 transaction, and in Insp. Specification tab, for fields group, group counter, usage, Plant, maintain the values?
Will this allow me to do the usage decision against the inspection lot which got generated when no inspection plan was assingned to that material, plant?
Waiting for your valuable inputs.

For Result Recording and Ud the inspection lot status must be REL as u told ur status is CRTD it Mean Some master
is missing in inspection lot,generally inspection plan for that u run QA02 enter inspection lot no go to specification tab
there a button assigned specification there click on that as u click on button u will find that plan for above material copied to lot and it will show u plan detail line group and group counter no.
then go to next screen Sample if sample management is active and click on sample then system will calculate sample size then save ur lot. it would get Status As REL now ui can enter result or take UD
for QM setting Refer
http://sap-questions.blogspot.com/

Error message while doing the Vendor Clearing

Dear Team,
I am encountering an issue while doing the Vendor clearing.I am nullifying the Vendor down payment against to RE document through residual posting system is showing the message like the below.
No additional posting to asset
Message no. AA 444
Diagnosis
A downpayment was already posted to the asset 80567 0 in the currently displayed document. Additional posting to the same asset in this document is not possible for technical reasons.
Procedure
Combine the two downpayments into one.
Please kindly advice.The concern Down payment is showing under open item in FBL1N.Kindly advice how to proceed further.
Thanks for the consideration.
Regards,
Suma.

Hi Suma,
First clear Down payment with using of F-54 & next you can clear normal OI.
Rgds
SumaMani

Compensation Planning - Error while doing the planning for Employee

Hi Friends,
We have implemented standard MSS Business package.
Line Mangers are using the Compensation Planning Iview and are facing errors while sending it for further approvals.
In the steps.
In the last step they get RFC_ERROR_SYSTEM_FAILURE.
A critical error has occurred. Processing of the service was terminated.
Access via NULL Object reference not possible.,error key : RFC_ERROR_SYSTEM_FAILURE.
Also to note that while doing the planning we get " No budget Data available"
Is budget data mandatory to complete planning. However in test systems we were able to run the complete cycle even without the budget data we were able to complete one cycle.
Kindly advise .
Thanks
Santosh

Hello..
This might point to an unhanded exception. There should be a backend dump (ST22) available and that would help in more analysis. You might need a ABAPer to look into the dump. You may paste the dump here for more analysis.

Error while doing the repository export

hi,
I am getting error while doing the export repository,Message: GEN-13, Additional Message: Dictionary is not available on this database, can anyone help me how to resolve this issue.
thanks,
Sundar M

Hi Sundar,
Please provide the export repository command, what you used and the log file to review.
The error "Dictionary is not available on this database" will pop up when Siebel Repository is not present in DB.
For export process you have to give repository name as "Siebel Repository" and it will export schema in to *.dat file.
NOTE: Do not change Siebel Repository name for export process.
Thanks,
Shilpi

While doing the goods issue system is thruoghing an erro message no VL621

hi ,
actually while doing the goods issue we had put a validation if that filed(serial number) is not valid.like AVAILABLE then the system has through to an error message.but after that error message system is throughing an nother error.
Risk of posting several mat.documents for one delivery->long text
    Message no. VL621
Diagnosis
    Processing has been terminated because there is the risk that the system
    creates several material documents for this delivery.
Procedure
    If this message occurs frequently, please note the exact situation and
    procedure as well as error messages and inform the system administrator.
and we changed that error to warning also still we are getting that error message.
how to stopthis error message.

hi actually not for serial number check.
there is a Z field in serial number master which is used for SIM number.
that SIM number will be validated with available SIM number from another Z table.
after this SIM error system is throughing this VL621 error after transaction terminated message.

Error in WBS element while doing the purchase requisition

Dear All,
While doing the purchase requisition in ps
the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded.
Kindly parovide any solution.
Best Regards,
Venkat.

Hi Venkar,
Check the available budget against WBSE - IN05-PR09-16 . 04 (S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned ), and the PR amount. Available Budget should be more than PR amount. Based on the tolerance limits set for the budget profile, maintain the Current Budget with budget updates and try to create a PR accordingly.
Hope this solves your problem !!
Br
Hari.
Edited by: Hari Krishna Kudaravalli on Aug 20, 2009 3:25 PM

Error while doing the return delivery

Hi Experts,
I had created an PO with describe requirement for 50 quantity and did partial confirmation of 30 quantity.
While doing the return delivery for 10 quantity system is throwing error
Line 1: No goods receipt possible for purchase order 4200051444 00001
When tried doing the same process in ECC, the return delivery is posted without error.
We were able to do the return delivery earlier. Can anybody throw light on, for the possible reason for this error.
Your early response is appreciated.
Regards,
ASGMDM

HI,
This is due to anyone of the following :
01. No further confirmation expected button is checked while doing confirmation for quantity 30. Please check the same in PO, if it is checked please uncheck the same so that you can do further confirmations.
02.Please check the confirmation status of 30 quanityt which you posted earlier. It should be having Posted in Backend. If it is not, then you cannot create return delivery for the same. Also please note that Back end GR document number for 30 quantity should be updated in the table BBP_PDBEH under the field BE_OBJECT_ID.
Thanks
Rajesh K

ERROR WHILE DOING THE SERVICE ENTRY SHEET

Hi All,
I have budget INR 3000 & i created PR INR 2500 ,PO for the same amount INR 2500.Against the same i made INR 2000 down payment and it would as statistical in SAP. But while doing the service entry for same PO ,budget exceeded error coming.
I seen Program RFFMS009 program also all DP figures updated as statistical ,but while clearing the DP through F-54 system getting budget exceeded error message.
Kindly help me .we are in 4.7
Former budgeting
Rgds
Manisuma

Hi All,
There is problem in Field status varaint
Rgds
Suma

Error while doing the confirmation by COR6N

Hello Friends,
While doing the confirmation by T.C COR6N,in that screen i gave the process order no. and the phase no. and the posting date only and pressed enter, after that system thrown the error message " Incorrect Resource entered " , Message no. S1333.
Diagnosis
This message is dynamically created, no more information possible.
Actually by default from the process order system takes the resource.Here in COR6N screen i haven't given the resource than also system is giving the error message.
Thanking you guys in advance.

PLease check in the master data, Whether you have mentioned the resource..
Foe Example, In discrete manufacturing, In the routing , we will give the workcenter which will be copied to the production order...
Similarly please check and revert..
karthick

Process Order Warning Message while doing the Goods Receipt

Dear All,
While doing the GR against process order via t.code MB31, we are getting a warning message which reads u201CProduction date of bch 110420 (17.06.2011) does not match the prod. date entered (26.08.2011)u201D this happens only if the batch number already exists in the system for the same material code , in this scenario if the user ignores the warning message & posts the document the existing batch number production date also will be over written with current/inputted manufacturing dateu2026 this will collapse the batch traceability. Is there a way to customize where we can have a different production date for same batch number?..
For example:
Batch Number: ABCD
Production date 10.02.2011
Batch Number: ABCD
Production date 11.02.2011
Batch Number: ABCD
Production date 12.02.2011
Regards,
Sivanandan

I'm sorry to say that I find your requirement to be absolutely not logical; a batch is, by definition, a homogenous quantity of a material, that you want to separate by it's characteristics from other, different, quantities of the same material.
If you decided that manufacturing date is a characteristic of the batch, then it has to be unique for one batch.
So, as I see it, you have two options: either decide that manufacturing date is not important and do without, or have different batches for the different dates.

HT1414 I lost all my data while doing the latest software upgrade, how do I get it back if I dont have a backup on iTunes?

I lost all my data while doing the latest software upgrade, how do I get it back if I dont have a backup on iTunes?

If you don't have a backup, then all your pics/text/notes are gone.
You can sync back music and app. If you were syncing your contacts with a program in itunes, then you'll get that back.
Not sure why you didn't do a backup, especially prior to doing an upgrade.

Auto check number pick while doing the F110

HI All,
Mentioned error message shown while doing the F110.
Check number status at beginning of processing:
My object is to pick the cheque numbers automatically ,while making the payments through F110.
System is not consuming the numbers.
Rgds
Mani Kumar

4 Possibilities -
> Check if you have the RFFOUS_C program defined for the payment method in Country settings - FBZP.
> Check if your variant for RFFOUS_C has the right payment method for printing checks.
> Check if yo have any other proposal for same vendor already created but not finished the payment run for that. It might be due to duplication of entries.
> Check your check-lot. Hope its not exhausted.
Please search forums for more.
Regards,
Zubin

Erorr while doing the portal postinstallation

Similar Messages

Maybe you are looking for