Erorr with Creative Blaster Audigy Value

hi
i have one
Creative Blaster Audigy Value.
but when im run creatvie graphic equlaizer see this erorr :
Graphic Equalizer
The audio device supported by this application is not detected. The application will exit.
OK
what am i doing?

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Similar Messages

  • Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

    pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
    how cn i solve this problem..
    pls help..thnx
    my spec:
    AMD Sempron 2400+
    Epox 8rda3i
    Seagate 80gb
    Palit GeForce 6600gt
    Creative Sound Blaster Audigy Value 24-bit

    screwguy_28 wrote:
    is this the one?
    IRQ 0 System timer OK
    IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
    IRQ 3 Communications Port (COM2) OK
    IRQ 4 Communications Port (COM) OK
    IRQ 5 Uni'versal Serial Bus (USB) Controller OK
    IRQ 6 Standard floppy disk controller OK
    IRQ 8 System CMOS/real time clock OK
    IRQ 9 Microsoft ACPI-Compliant System OK
    IRQ 9 SCSI/RAID Host Controller OK
    IRQ 0 MPU-40 Compatible MIDI Device OK
    IRQ NVIDIA nForce PCI System Management OK
    IRQ 2 PS/2 Compatible Mouse OK
    IRQ 3 Numeric data processor OK
    IRQ 4 Primary IDE Channel OK
    IRQ 6 Sound Blaster Audigy OK
    IRQ 8 SoftV92 Data Fax Modem OK
    IRQ 9 NVIDIA GeForce 6600 GT OK
    IRQ 2 Standard OpenHCD USB Host Controller OK
    IRQ 22 Standard OpenHCD USB Host Controller OK
    Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
    Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
    jutapa

  • Creative Sound Blaster Audigy Value/SE/LS Driver 01.04.0

    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit Vista Beta Driver 0.04.0055
    Yeah, 32-bit, wooo.
    When will a 64-bit version be available?

    Has anyone tried the "AMD64" Driver for the Audigy Value (I assume this is the SE?) that is on the bundled CD?
    I tried different driversets from the download/support site to no avail.
    I didn't think about the CD driver until I got to work this morning.
    Really wishing I picked up the Li've! (yesterday) instead of the Audigy Value now
    ...expected this card to have a better chance, especially with "x64 drivers" on the box.
    Oh well, I'll give it one more shot tonight with those CD drivers... hopefully something will work.Message Edited by abz on 2-07-200604:08 PM

  • About my Sould Blaster Audigy Value in Vi

    After installing the latest driver for Sound Blaster Audigy Value (Vista)
    i can only set 24 bit / 48Khz in the windows audio resample rate
    how can i set to 96khz?
    Besides, my bundled driver can't work in vista with this driver. Can anybody tell me
    how to solve this problem or tell me when will the next driver for this card be released? thanks a lot

    After installing the latest driver for Sound Blaster Audigy Value (Vista)
    i can only set 24 bit / 48Khz in the windows audio resample rate
    how can i set to 96khz?
    Besides, my bundled driver can't work in vista with this driver. Can anybody tell me
    how to solve this problem or tell me when will the next driver for this card be released? thanks a lot

  • Windows Vista vs. Sound Blaster Audigy Value = Problem

    I am facing problems with SoundBlaster Audigy Value when using it with Windows Vista. However i have downloaded and installed latest drivers (Version No. - SB24_VTDRV_LB__04_0077) supporting this card but still it is functioning as good as it worked with windows XP .
    Prob # : I can hear sound from my TV Tuner device but cannot perform recording , an error ("Cannot render audio capture system") is generated whenever i try to do so. I also tried to set recording control of my Tv Tuner device to sound card's "line in" parameter as i used to do in XP but in Vista my device shows nothing. Why ?
    Prob # 2: Can you tell me where I can find "creative graphic equalizer" for this card which supports windows Vista or please provide a link to download it's
    Prob # 3: Why we cannot enable "Bass Boost" using new Creative Audio Console while using Creative Inspire 4400 (4. Channel Speakers) like i used to do in windows XP ?
    I will be extremely thankful to you if you please provide a solution to these problems.
    Thank You........

    altho i tried this with audigy se u might wanna check this
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7665#M7665

  • Error with Sound Blaster Audigy 2 installation...driv

    Hi
    I am really stuck with this issue and was wondering if someone out there could help. I have an Audigy 2, and have had it working for a long period of time. I had to re install Windows not so long ago and since then I have found a number of errors with my sound.
    Firstly there are a lot of pops and clicks when either gaming or playing audio files. Admittedly the pops and clicks happen a lot more when gaming (multiple sounds playing at once ?).
    Therefore I decided to come onto creatives site and download the new drivers for my sound card. I was still running the original drivers from the CD supplied, so felt it was about time.
    I downloaded the file SBA2_PCWDRV_LB__84_55-R, which is the correct update for my card and tried to install it.
    It comes up with a message:
    Setup could not detect and Sound Blaster Audigy 2 on you system.
    Please ensure that your sound blaster hardware is properly installed before running this setup program.
    setup will not exit
    After that message i was a little confused, because as far as I was concerned everything was working ok, sound was coming out and was coming out correctly from my 5. surround system.
    So i double clicked on the Creative Volume Control to check everything was on.
    I'm not sure if this is an error but a long the top where you select the output device mine says:
    SB Audigy [A000]
    I'm not 00% sure but I don't think it said that before, I think it said something else, but I could be wrong.
    I decided to uninstall my sound card and re-install. Everything installed absolutely fine from the CD, recognised the card and no complaints.
    So I tried to re-install the driver update, and same message. (And the output device is still SB Audigy [A000].
    Again I uninstalled and tried the Beta patch on the off chance that that would work, still nothing, it does not recognise the card in my computer.
    I definately have an Audigy 2 and it has worked properly allowing me to update it before.
    Sorry to have such a long message, but I am really confused about all of this and would really like to get everything working properly.
    Any advice and help would be appreciated.
    Thanks

    fedepolito,
    I assume that you are running WinXP with Service Pack 3. Did you do a clean sweep of all the Creative Software and reinstall from the A2ZS CD? Do you get sound then?
    Me disculpo que no entend?a que todo que usted dijo en su poste. Asumo que usted est? funcionando Windows XP con el Service Pack 3. ?Usted hizo un retiro del barrido limpio de todo el Creative software? (Busque los foros para el "clean sweep." ) ?Despu?s de eso, cuando usted reinstala del CD de Audigy 2 ZS, usted consigue el sonido?
    Message Edited by Katman on 03-29-2009 2:59 [email protected]

  • Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

    i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

    Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
    Check the end of this thread with tips:
    http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
    And take a look for other similar threads.

  • Capturing laserdisc AC3 signal with Sound Blaster Audigy 2 ZS Platinum

    I'm considering converting my laserdisc collection over to DVD.
    As far as PC hadware is concerned, I have the ATI All-In-Wonder 9800 Pro and the Sound Blaster Audigy 2 ZS Platinum Pro.
    My system in a 3.2G P4 on a Intel D875PBZ board w/ 2Gig of memory. Connected are 3 dri'ves, (2) 250G SATA dri'ves and () old 250G IDE dri've that I keep archi'ves on.
    The laserdisc player has the following:
    AC-3 Bit Stream / PCM Optical Output AC-3 Bit Stream / PCM Coaxial Output PCM Coaxial Output
    I was planning to use the optical input of the soundcard but was unsure what to use to capture the digital stream to capture the entire surround channel info. Normally audio is captured as an uncompressed WAV and then converted to AC3 which to me is a wasted step since it's only going to wind up as AC3 again
    I've used Virtual dub in the past to capture TV broadcasts, but I seem to be at a loss on this current venture. Any assistance will be great

    Alright, let me just double check...
    As long as the output from my laserdisc is 48K then things should work fine and I should receive the entire unadulterated stream, no data padding or modification. If it's not 48k then it won't. This is as long as I save it as 2. PCM audio stream
    The audiobitrate for AC3 should be at 384k, and this will be preserved using the above method?
    From what I'm reading, this unprocessed stream should sound like white noise. Once processed by cooledit , Soundforge or besweet I should have the DD 5. soundtrack intact and not a 2 channel AC stream?
    Sorry if I am rephrasing things but I just want to be absolutly certain when I start this project .
    Message Edited by madmax66 on -6-2004 02:40 AM

  • Recording with Sound Blaster Audigy 2 Value! ag

    Alright, I've been trying to record from various instruments and devices... (synth with /4 inch stereo output to /8 inch convertor, cd player with /8 inch output, guitar to amp to /4 inch stereo output to /8 inch convertor)Basically, I want to record in stereo sound.) Does line-in on the SB Audigy 2 Value card have stereo input? Whenever I've tried to record, I have only been getting the left channel. 2) Where's the game controller / midi input? Do I have to purchase the optical digital i/o 2 add on? And if I do, will this even work with the Audigy 2 value? 3) Does the SPDIF work as a stereo input for any of the devices I've been trying to record from at all? or does it require the I/O device I just mentioned?Thanks in advance,Tyler Pantella

    picklehammer wrote:
    Alright, I've been trying to record from various instruments and devices... (synth with /4 inch stereo output to /8 inch convertor, cd player with /8 inch output, guitar to amp to /4 inch stereo output to /8 inch convertor)Basically, I want to record in stereo sound.) Does line-in on the SB Audigy 2 Value card have stereo input? Whenever I've tried to record, I have only been getting the left channel. 2) Where's the game controller / midi input? Do I have to purchase the optical digital i/o 2 add on? And if I do, will this even work with the Audigy 2 value? 3) Does the SPDIF work as a stereo input for any of the devices I've been trying to record from at all? or does it require the I/O device I just mentioned?Thanks in advance,Tyler Pantella
    You just can't record analog mono instruments as stereo without a stereo microphone.
    If you mean to record a signal which 'stays in the middle' and not 'panned left or right' then you need
    - mono to L+R (stereo) convertor adapter
    or
    - mono to R+L (stereo) cable
    between (pre)amplifier output and soundcard input.
    <i>Note: Normally instruments are recorded mono --> easier to set instrument positions in final stereo mix</i>.
    ) yes it is stereo
    2) no game/midi on Value. Purchasing Digital I/O won't make any difference to this.
    3) dunno, see yoyr user manual
    .jtp

  • Problems With Sound Blaster Audigy: New Sys

    I just received my new computer from Dell:
    Pentium D 3.0ghz
    Geforce 7800 GTX 256mb
    2 GIGs ram
    Windows Xp Prof x64
    SoundBlaster Audigy
    My problem occurs in my game called Nascar Racing 2003 Season. The sounds play fine, however when It comes time to load more 3dimensional sounds (like cockpit), the sounds turn into a high pitched buzz, and then freezes my computer so that not even ctl-alt-del works. Sometimes this happens when exiting the game as well, and my system does a complete memory dump and then shows this file: ctoss2k.sys..
    I've reinstalled the drivers, the game, and I'm out of ideas. I don't have any other games to test this one, but I've run the Dell diagnostics and run the dxdiag for the sound and it passed with flying colors. If nothing can be done here my next idea is getting on the phone with Dell and having them fix my new computer!
    Any help would be greatly appreciated!
    P.S. On my last computer I had Sound Blaster Li've! and that worked perfectlyMessage Edited by mciarlo on -0-2005 04:05 AM

    Noticed your setup (XP PRO 64)
    Correct me if Im wrong but I dont think there are drivers for 64bit yet Right?

  • Problems With Sound Blaster Audigy 2

    The Problem that I'm having is this:
    Every time that i bring up the volume console to do whatever, once i move the mouse cursor into the window, my computer either restarts or locks up. Now I have tried over and over again to update all drivers and software for this sound card. Even thinking that it might be a compatibility issue with other cards (video, wireless) i updated their drivers as well. Doing so made me run into other problems, like opening up office Word, just locks up. I never had these problems before at all until i installed this sound card. Now, the card works perfectly! Sound comes out in all respecti've ports and microphone and line in works as well. Its the software that I cant seem to use. I just don't understand why, this is a brand new card with its own software. But to add lastly to this, I formatted hard dri've, installed Windows XP home, then immediately afterwards i installed the drivers and software for the sound card and it worked like nothing was wrong at all, software and all. But once i installed my video drivers and software, either the sound card software didn't work or the operating system would lock up right after the splash load screen. Please, can someone let me know anything that i can do to fix this problem! It's been very bothersome and annoying as all! Thank You.

    Alright, I once again formatted the hard dri've. This is what i've done:
    Windows XP Home w/SP
    All Motherboard Drivers
    Disabled On-Board Sound
    Installed Audigy 2 ZS Drivers and Software
    Removed Wireless Card and Video Capture card
    And all Windows OS updates
    Direct X 9.0c
    But what i haven't done yet is installed the drivers and software for the video card. I have a ATI 9800 XT 256mb AGP card, getting updated drivers for the card is not a problem. But I also didn't install service pack 2 yet either. im trying to figure what is really causing the problem now. But as of now, the sound card and software is working properly. thats pretty much where i stand now, so if there is anyone out there that might now what i can do from here, or what should i NOT do, please let me know!
    Thanks again

  • Re: Sound Blaster Audigy Value/SE/LS & Li

    New drivers for this cards again ? :angry: . Most of the SoundBlaster users are waiting for Sound Blaster /2/2ZS/4 fully functional?driver...

    can someone mod these for the SB Li've 5. again

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

    (ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
    CONTINUE ON-
    Download RAR file with ISO inside and install if you don't have the installation CD
    installation cd with EQ download: http://files.filefront.com//;689430;;/
    If you do or after you finish downloading goto step A.
    A) Take your Creative Driver/Install CD, copy it to your hard dri've.
    B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
    C) Set it for Windows XP SP2.
    D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
    E) Restart when told to
    F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
    G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
    Message Edited by jeepbme on 03-08-200708:50 PM

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Severe Jitter/Glitches with Audigy Value/SE in Windows 7 64bit

    Hello all,
    Im experiencing a severe sound jitter and random "clicks" in windows 7 when playing music and using the computer for browsing.
    I didnt notice this problem before because i used to keep my computer idle while doing other stuff when playing music.
    the sound plays as if it "slows down" or something when doing random activities on the computer
    My setup is
    Intel Core 2 Duo E6550
    4GB DDR2 800 MHZ
    Creative Sound Blaster Audigy Value/SE
    Windows 7 64BIT
    Gefore 8880GT
    I use winamp for playback.
    Im using the latest drivers from the creative site.
    Is there anything I can do?
    The sound so

    Thanks for the reply jmacguire.
    I'm using default values: 6 bit, 48000 hz (DVD Quality)
    Which one do you recommend with the SB Audigy SE?
    The sound distorts when listening music in youtube or other flash webpages, both in normal and in HQ settings.
    I have tried almost everything. I think the drivers downoladed for Windows 7 works better.
    Then the Autoupdate function downloaded some new drivers (version .0090 I think) and it screwed up the sound on the web.

Maybe you are looking for