Erorr

hello
please help 
my touch pad is not working 
also there is a yellow trinagle on this devices 
-pci simple communications controller
-pci device
-unknown decice
and 
-AMD radeon hd 7600m series
my lap is HP Envy 6-1090ee slickbook 

Welcome Haridy.
All your drivers can be found here.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=5273155
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Similar Messages

  • After PC Suite upgrade erorr with infrared!

    Halo to all.
    I had before PC Suite PC_Suite_6_84_10_3_eng - everything was ok and were working good on Nokia 8800 and N95 8GB.
    Yesterday i made update To PC_Suite_6_85_12_0_eng ( software ask it to make automaticly )
    And after update and new instalation I got message:
    Problem with infrared connection?
    - Make sure that your PC has the required infrared hardware installed.
    - Make sure that you have activated infrared on both your PC and your phone. For more information, refer to the manuals for your phone and PC.
    - Make sure that your PC and phone use the same infrared speed. To adjust the connection speed, go to Control Panel > Wireless Link > Hardware > Properties > Advanced. In the property list, select Maximum Connect rate and change the rate. For more information, refer to your PC manual.
    - For Symbian phones:
    - To be able to connect your phone to the PC via infrared, make sure that you have selected to use the infrared connection type on your phone. For more information, refer to your phone manual.
    - To be able to connect to the Internet using infrared, make sure that you have selected to use the infrared modem on your phone. For more information, refer to your phone manual.
    - Restart both PC and the phone and try to create the connection again.
    - If the connection still cannot be established, consult the Nokia PC Suite FAQ Search on the Nokia web site.
    When I press ok, this message closed and I see:
    Selecet conection type:
    - cable conection
    - infrared
    - bluetooth
    But the problem: I cannot selcet cable conection!!!! All radioboxes are not active!!! Also I DONT HAVE INFRARED in my labtop and never had before. Bbut before it was working - now always this erorr message and no possibility to change connection type!
    I have make next also: full unninstall, reboot. Instaling old version - same!
    Please help me to fix it.
    Have Windows XP

    (I assume you have now 6.85.12, check from PC Suite -Help -About box and select info (i) and copy-paste all the text to your answer)
    Open PC Suite - Settings - Manage connections, make sure all the alternatives (tell what they are) are ticked ?

  • I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."

    Hello,
    I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."
    Please heLp.
    Thank you.

    Repair your Apple Sofyware update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install

  • Help Fix erorr Contentpresenter

    Hi All
    I using weblogic portal 10.3, i use porlet Content Presenter have get content in CMS, but many times throws erorr such as:
    ####<Aug 9, 2012 9:12:52 AM ICT> <Error> <netuix> <portalXXXXXXXXXX> <MS0XXXXXXXXXXX> <[ACTIVE] ExecuteThread: '113' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1344478372727> <BEA-423405> <An exception [java.lang.NullPointerException] was thrown while rendering the content at [/portlets/wlp/contentpresenter/ContentUIController.jpf].
    com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: java.lang.NullPointerException
         at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:721)
         at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:265)
         at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.render(PageFlowStubImpl.java:137)
         at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
         at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:429)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:736)
         at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:401)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
         at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
         at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
         at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:465)
         at com.bea.netuix.servlets.manager.UIServlet.processControlTree(UIServlet.java:373)
         at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.java:981)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
         at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: java.lang.NullPointerException
         at org.apache.beehive.netui.pageflow.internal.AdapterManager.getServletContainerAdapter(AdapterManager.java:43)
         at org.apache.beehive.netui.pageflow.internal.DeferredSessionStorageHandler.applyChanges(DeferredSessionStorageHandler.java:305)
         at com.bea.portlet.adapter.scopedcontent.ScopedContentStorageHandler.applyChanges(ScopedContentStorageHandler.java:73)
         at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:863)
         at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
         at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
         at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
         at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
         at com.bea.portlet.adapter.scopedcontent.framework.internal.PageFlowUtilsBeehiveDelegate.strutsLookupInternal(PageFlowUtilsBeehiveDelegate.java:43)
         at com.bea.portlet.adapter.scopedcontent.framework.PageFlowUtils.strutsLookup(PageFlowUtils.java:108)
         at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:707)
         at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:265)
         at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.render(PageFlowStubImpl.java:137)
         at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
         at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
         at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
         at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
         at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
         at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
         at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:465)
         at com.bea.netuix.servlets.manager.UIServlet.processControlTree(UIServlet.java:373)
         at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.java:981)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)-Please Help me resolve, Thanks all member

    I believe there is a patch (or patches) to combat the elusive "actionlookupfailed" exception. Contact Oracle Support for the patch information.
    Brad

  • Erorr code 4014

    Hi My second Ipad 2 4th gen. First had trouble connecting to the internet Apple replace under warranty in October 2013.The warranty expiried November 2013. Now my replacement has now unexpectly turn off i have tried rebooting through itunes which says it is in recovery mode and a erorr code 4014. My replacement has only lasted 7 months which i am not very happy with what can i do. Ipad is up to date. Any help welcome. Thanks

    How to Fix iTunes Error 4014/4013 and Upgrade Your iPhone Successfully
    http://www.igeeksblog.com/how-to-fix-itunes-error-4014-4013/
    iOS: Restore errors 4005, 4013, and 4014
    http://support.apple.com/kb/TS5314
    Cheers, Tom 

  • Tpcall erorr

    private string tester()
    TypedFML32 request = new TypedFML32(430024);
    TypedBuffer response = new TypedFML32(430024);
    AppContext ctx = null;
    String result = null;
    try
    request.Fadds(aaaa, "PBO");
    request.Fadds(bbbb, "06444658");
    TypedTPINIT tpinfo = new TypedTPINIT();
    ctx = AppContext.tpinit(tpinfo);
    ctx.tpcall("CUSTADDR", request, ref response, 2);
    result = "1111";
    catch (Exception ex)
    MessageBox.Show(ex.Message);
    label2.Text = ex.ToString();
    result = "0000";
    ctx.tpterm();
    return result;
    this the erorr "TPESVCFAIL - application level service failure"
    iam using tuxedo 9.1 client and Tuxedo .NET Workstation Client Applications "c#"
    and how to use TypedFML32 .
    thanks
    Edited by: a.mofeez on 07/04/2013 03:21 ص

    Hi,
    What Kristian says is absolutely correct, the error is an indication that the service you called returned an error, application error, not a Tuxedo infrastructure error, so you will need to talk to the service developer to see what is wrong with your request. Also, even though a service returns TPFAIL, it can still return data, so there may be an output buffer that contains more information.
    As for FML32, you seem to have the hang of it., i.e., you use the various FML Library methods to create and modify the contents of the FML32 buffer. The documentation for that is at:
    http://docs.oracle.com/cd/E13203_01/tuxedo/tux91/dotnet/dotnet_chapter.htm
    http://docs.oracle.com/cd/E13203_01/tuxedo/tux91/fml/fml01.htm
    By the way, Tuxedo 9.1 is really old and only extended support is available for it. Premiere support has already ended.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • How to fix erorr 9

    hello guys i have this problem for over month right when i try to restore my ipod 4g 64gig to 6.1.3firmware start normal to apple icon and bar under the icon like any normal restore after 20 sec shutdown in giving mr erorr number 9 in itunes and trust me i try everything in internet to fix i change the usb delete it itunes and installed back to pc i try do it in anthere pc try costem frimware nothing seem to work the pig problem is the are no apple shops close to me to repair it soo anyone can help me with this issue and thanks
    (Sorry for bad englsih)

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Not knowing exacly what you tried.
    Sayinfg everythng does not say WHAt you tried
    If still problem, make an appointment at the Genius Bar of an Apple store .
      Apple Retail Store - Genius Bar

  • Bapi erorr in portal

    hi,
    i wont run bapi in portal and i get erorr :
    No storage space available for extending an internal table., error key: RFC_ERROR_SYSTEM_FAILURE
    the bapi is working o.k. in R.3
    what can be the problem?
    Regards

    Hi Ricardo,
                      U can find it in ur server .
    D:\usr\sap\<SID>\JC00\j2ee\cluster\server0\log. at this place u can check for defaultTrace.trc file. check this file & get the stack trace from there.
    regards
    Sumit

  • Erorr in run bapi in portal

    hi,
    i wont run bapi in portal and i get erorr :
    No storage space available for extending an internal table., error key: RFC_ERROR_SYSTEM_FAILURE
    the bapi is working o.k. in R.3
    what can be the problem?
    Regards

    hi ricardo.............
           check for the number entries that the bapi returns when run in r3.
            make sure that it is rfc enabled.
            tell the portal consulant to check whether the bapi is being called number of times so that the internal table is getting filled again and again... tell hi to debug the coding.
    ---regards,
       alex b justin

  • Erorr in run bapi

    hi,
    i wont run bapi in portal and i get erorr :
    No storage space available for extending an internal table., error key: RFC_ERROR_SYSTEM_FAILURE
    the bapi is working o.k. in R.3
    what can be the problem?
    Regards

    does the query too large, consuming large memory?
    This is most likely to happen when the system is being used extensively and the memory is not sufficient, or the query is very large or complex.
    - any relevant dump in ST22?
    - can simplify the bapi query definition ?
    - try execute $SYNC to clear the internal
    - can it be run in background somehow ?
    - what is the value of following parameters ?
    ztta/roll_extension =
    abap/heap_area_total
    abap/heap_area_dia =
    abap/heap_area_nondia
    em/initial_size_MB =
    - are you in 64bits or 32 bits ?
    - SAP note #649327     Analysis of memory consumption
    cheers,
    Vincent

  • Why can't I update to 10.5?  Keep getting erorr message

    Please help.  I cannot update to 10.5 in iTunes.  I keep getting an erorr  message.  I need to update to get it to work on my iPad.
    Thanks
    carol87

    With that one, I'd try updating using a .dmg installer downloaded from the Apple Website:
    http://www.apple.com/itunes/download/

  • Erorr in phase DEPLOY_ONLINE_DEPL

    Hello Netweaver Expert,<br><br>
    I get an erorr when upgrade sap netweaver pi 7.1 to EHP1 in phase DEPLOY_ONLINE_DEPL. This the log of \usr\sap\<SID>\EHPI\java\log:<br><br>
    LOGHEADER[START]/--><br>
    HELP[Manual modification of the header may cause parsing problem!]/--><br>
    LOGGINGVERSION[2.0.7.1006]/--><br>
    NAME[ :\usr\sap\DXI\EHPI\java\log\DEPLOY_ONLINE_DEPL_DDB_28.LOG]/--><br>
    PATTERN[DEPLOY_ONLINE_DEPL_DDB_28.LOG]/--><br>
    FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/--><br>
    ENCODING[UTF8]/--><br>
    LOGHEADER[END]/--><br><br>
    Aug 24, 2010 10:34:47 PM:<br>
    com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been started.
    Aug 24, 2010 10:34:47 PM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.
    Aug 24, 2010 10:34:47 PM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter action=deploySlot
    Aug 24, 2010 10:34:47 PM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter connect=standard
    Aug 24, 2010 10:34:47 PM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter errorStrategy=skipDepending
    Aug 24, 2010 10:34:47 PM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter rule=all
    Aug 24, 2010 10:34:47 PM [Info]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.checkParameters(PhaseTypeDeploymentManager.java:558) [Thread[main,5,main]]: Checking phase parameters action, connect.
    Aug 24, 2010 10:34:47 PM [Info]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.checkParameters(PhaseTypeDeploymentManager.java:570) [Thread[main,5,main]]: Phase parameters have been checked. All required 1 phase parameters have been set.
    Aug 24, 2010 10:34:47 PM [Info]:    com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:152) [Thread[main,5,main]]: Trying to connect JSPM.
    Aug 24, 2010 10:34:47 PM [Info]:    com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:161) [Thread[main,5,main]]: JSPM is not connected, trying to start it.
    Aug 24, 2010 10:34:48 PM [Info]:                                                com.sap.sdt.util.proc.Process.start(Process.java:164) [Thread[main,5,main]]: :\usr\sap\DXI\EHPI\jvm\jre\bin\java -ea  -Xmx1024m -cp :\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\bootstrap\lib\sdt_jspm_bootstrap.jar  Jspm -boot=win  -port=6250 -properties=jspm-srv_config.txt -startJSPM
    Aug 24, 2010 10:34:49 PM [Info]:                                                         java.lang.Thread.dumpThreads(Thread.java:-2) [Thread[ProcessReader,5,main]]: >> Current log directory is :\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_24_22_34_49.
    Aug 24, 2010 10:34:51 PM [Info]:     com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.finished(AbstractToolConnector.java:373) [Thread[Process(:\usr\sap\DXI\EHPI\jvm\jre\bin\java -ea  -Xmx1024m -cp :\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\bootstrap\lib\sdt_jspm_bootstrap.jar  Jspm),5,main]]: JSPM terminated with exit code 0.
    Aug 24, 2010 10:34:51 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.handleExitMessage(AbstractToolConnector.java:600) [Thread[JSPM,5,main]]: Handling tool exit with rc=0
    Aug 24, 2010 10:34:53 PM [Info]:      com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.connect(AbstractToolConnector.java:721) [Thread[main,5,main]]: Connected to host [host_name] on port 6250.
    Aug 24, 2010 10:35:07 PM [Info]:    com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:164) [Thread[main,5,main]]: JSPM was started successfully.
    Aug 24, 2010 10:35:07 PM [Info]:      com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:207) [Thread[main,5,main]]: Trying to log in with user SAP*.
    Aug 24, 2010 10:35:16 PM [Info]:      com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:219) [Thread[main,5,main]]: JSPM successfully logged in with user SAP*.
    Aug 24, 2010 10:35:16 PM [Info]:              com.sap.sdt.util.net.AbstractCharacterCommLink.read(AbstractCharacterCommLink.java:131) [Thread[CharacterCommLink,5,main]]: socket closed
    Aug 24, 2010 10:35:16 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.handleMsgClosed(AbstractToolConnector.java:552) [Thread[JSPM,5,main]]: Reporting failed commlink.
    Aug 24, 2010 10:35:17 PM [Info]:                                                         java.lang.Thread.dumpThreads(Thread.java:-2) [Thread[ProcessReader,5,main]]: >> Closed input stream
    Aug 24, 2010 10:35:17 PM [Info]:                                                         java.lang.Thread.dumpThreads(Thread.java:-2) [Thread[ProcessReader,5,main]]: >> Closed input stream
    Aug 24, 2010 10:35:17 PM [Info]:         com.sap.sdt.jspm.rapi.connector.JSPMConnector.waitForJSPMTermination(JSPMConnector.java:457) [Thread[main,5,main]]: JSPM stopped.
    Aug 24, 2010 10:35:17 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Aug 24, 2010 10:35:17 PM [Error]: com.sap.sdt.jspm.unattended.processors.LoginRequestProcessor.process(LoginRequestProcessor.java:123) [Thread[main,5,main]]:<b> Check account for user SAP* failed. JSPM is unable to logon on AS Java</b>.
    JSPM version is 7.11.5.0.18. Current JSPM log directory is :\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_24_22_34_49.
    Aug 24, 2010 10:35:17 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:714) [Thread[main,5,main]]: <html>The following <b>/thread/1625419 [original link is broken], but i do not know what's his/her solution to solve his/her problem. I change check my pswd in secstore and add profiles SAP_NEW for SAP* in shadow instance, but still get same problem :(. <br><br>
    Any suggestion to help me please ?<br><br>
    Regards<br>
    FX<br><br>
    Edited by: felix tansulla on Aug 24, 2010 6:34 PM

    Dear Tom,<br><br>
    After retry in many time, finally the JSPM.TRC created and appear in folder JSPM\trc. This is the content of JSPM.TRC file:<br><br>
    Aug 31, 2010 6:27:18 PM [Error]:<br>
                                                    com.sap.sdt.j710.deploymentmgr.DeploymentManagerImpl [Thread[CharacterCommLink,5,main]]: com.sap.engine.services.dc.api.ConnectionException: [ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.
    Reason: Exception during getInitialContext operation. Cannot establish connection to the remote server.<br><br>
    Aug 31, 2010 6:27:18 PM [Error]: <br>com.sap.sdt.j710.deploymentmgr.DeploymentManagerImpl.checkConnectivity(DeploymentManagerImpl.java:1310) [Thread[CharacterCommLink,5,main]]: com.sap.engine.services.dc.api.ConnectionException: [ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.
    Reason: Exception during getInitialContext operation. Cannot establish connection to the remote server.<br><br>
    Aug 31, 2010 6:27:18 PM [Error]:  <br>                                               com.sap.sdt.j710.deploymentmgr.DeploymentManagerImpl [Thread[CharacterCommLink,5,main]]: com.sap.engine.services.dc.api.ConnectionException: [ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.
    Reason: Exception during getInitialContext operation. Cannot establish connection to the remote server.
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:204)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:129)
         at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:31)
         at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:110)
         at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:73)
         at com.sap.sdt.j710.deploymentmgr.DeploymentControllerFacade.connectDC(DeploymentControllerFacade.java:305)
         at com.sap.sdt.j710.deploymentmgr.DeploymentControllerFacade.connect(DeploymentControllerFacade.java:117)
         at com.sap.sdt.j710.deploymentmgr.DeploymentManagerImpl.checkConnectivity(DeploymentManagerImpl.java:1305)
         at com.sap.sdt.jspm.gui.AbstractSystemInitializer.checkAccount(AbstractSystemInitializer.java:408)
         at com.sap.sdt.jspm.unattended.processors.LoginRequestProcessor.process(LoginRequestProcessor.java:118)
         at com.sap.sdt.jspm.unattended.RequestController.processRequest(RequestController.java:135)
         at com.sap.sdt.jspm.unattended.CommunicationController.notifyJSPMRequestListeners(CommunicationController.java:118)
         at com.sap.sdt.jspm.unattended.CommunicationController$JSPMConnectionObserver.receive(CommunicationController.java:247)
         at com.sap.sdt.ucp.communication.SDTServerConnection$SDTServerConnectionObserver.msgReceived(SDTServerConnection.java:579)
         at com.sap.sdt.util.net.AbstractCommLink.fireMsgReceived(AbstractCommLink.java:229)
         at com.sap.sdt.util.net.AbstractCommLink.run(AbstractCommLink.java:146)
         at java.lang.Thread.run(Thread.java:666)
    Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. Cannot establish connection to the remote server. [Root exception is com.sap.engine.services.rmi_p4.P4ConnectionException: Error. Check your available working servers. Error message: server crashed while processing the request]
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:519)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:387)
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
         at javax.naming.InitialContext.init(InitialContext.java:223)
         at javax.naming.InitialContext.<init>(InitialContext.java:197)
         at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:181)
         ... 16 more
    Caused by: com.sap.engine.services.rmi_p4.P4ConnectionException: Error. Check your available working servers. Error message: server crashed while processing the request
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:743)
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:725)
         at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:148)
         at com.sap.engine.services.rmi_p4.ClientConnection.run(ClientConnection.java:395)
         ... 1 more<br><br>
    Aug 31, 2010 6:27:18 PM [Error]: <br>com.sap.sdt.jspm.unattended.processors.LoginRequestProcessor.process(LoginRequestProcessor.java:123) [Thread[CharacterCommLink,5,main]]: Check account for user SAP* failed. JSPM is unable to logon on AS Java.
    Aug 31, 2010 6:27:18 PM [Error]:   <br>                                      com.sap.sdt.jspm.unattended.processors.LoginRequestProcessor [Thread[CharacterCommLink,5,main]]: com.sap.sdt.util.diag.DiagException: Check account for user SAP* failed. JSPM is unable to logon on AS Java.
         at com.sap.sdt.jspm.unattended.processors.LoginRequestProcessor.process(LoginRequestProcessor.java:123)
         at com.sap.sdt.jspm.unattended.RequestController.processRequest(RequestController.java:135)
         at com.sap.sdt.jspm.unattended.CommunicationController.notifyJSPMRequestListeners(CommunicationController.java:118)
         at com.sap.sdt.jspm.unattended.CommunicationController$JSPMConnectionObserver.receive(CommunicationController.java:247)
         at com.sap.sdt.ucp.communication.SDTServerConnection$SDTServerConnectionObserver.msgReceived(SDTServerConnection.java:579)
         at com.sap.sdt.util.net.AbstractCommLink.fireMsgReceived(AbstractCommLink.java:229)
         at com.sap.sdt.util.net.AbstractCommLink.run(AbstractCommLink.java:146)
         at java.lang.Thread.run(Thread.java:666)<br><br>
    Aug 31, 2010 6:27:18 PM [Error]:<br>com.sap.sdt.jspm.unattended.processors.LoginRequestProcessor.process(LoginRequestProcessor.java:123) [Thread[CharacterCommLink,5,main]]: Check account for user SAP* failed. JSPM is unable to logon on AS Java.
    JSPM version is 7.11.5.0.18. Current JSPM log directory is E:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_31_15_19_55.<br>
    Aug 31, 2010 6:27:18 PM [Error]:     <br>                                                   com.sap.sdt.jspm.unattended.RequestController [Thread[CharacterCommLink,5,main]]: com.sap.sdt.util.diag.DiagException: Check account for user SAP* failed. JSPM is unable to logon on AS Java.
    JSPM version is 7.11.5.0.18. Current JSPM log directory is E:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_31_15_19_55.
         at com.sap.sdt.jspm.unattended.processors.LoginRequestProcessor.process(LoginRequestProcessor.java:123)
         at com.sap.sdt.jspm.unattended.RequestController.processRequest(RequestController.java:135)
         at com.sap.sdt.jspm.unattended.CommunicationController.notifyJSPMRequestListeners(CommunicationController.java:118)
         at com.sap.sdt.jspm.unattended.CommunicationController$JSPMConnectionObserver.receive(CommunicationController.java:247)
         at com.sap.sdt.ucp.communication.SDTServerConnection$SDTServerConnectionObserver.msgReceived(SDTServerConnection.java:579)
         at com.sap.sdt.util.net.AbstractCommLink.fireMsgReceived(AbstractCommLink.java:229)
         at com.sap.sdt.util.net.AbstractCommLink.run(AbstractCommLink.java:146)
         at java.lang.Thread.run(Thread.java:666)<br><br>
    Aug 31, 2010 6:27:19 PM [Error]:    <br>                                                         com.sap.sdt.ucp.pce.ctrl.ExecutionDialog [Thread[main,5,main]]: Unable to process dialog ScrollDialog: Could not send dialog message. See previous messages.
    Unable to send message. See previous message.
    Communication link is closed.<br><br>
    Aug 31, 2010 6:27:19 PM [Error]:    <br>                                                         com.sap.sdt.ucp.pce.ctrl.ExecutionDialog [Thread[main,5,main]]: Unable to process dialog ScrollDialog: Could not send dialog message. See previous messages.
    Unable to send message. See previous message.
    Communication link is closed.<br><br>
    Aug 31, 2010 6:27:19 PM [Error]:  <br>                                                          com.sap.sdt.ucp.pce.ctrl.ExecutionDialog [Thread[main,5,main]]: Unable to process dialog ScrollDialog: Could not send dialog message. See previous messages.
    Unable to send message. See previous message.
    Communication link is closed.<br><br>
    An this the content of deploy log in folder  \j2ee\JSPM\log\:<br>
    LOGHEADER[START]/-->
    HELP[Manual modification of the header may cause parsing problem!]/-->
    LOGGINGVERSION[2.0.7.1006]/-->
    NAME[E:\usr\sap\DXI\DVEBMGS00\j2ee\JSPM\log\log_2010_08_31_15_19_55\deploy_2010-08-31_15-20-10.log]/-->
    PATTERN[deploy_2010-08-31_15-20-10.log]/-->
    FORMATTER[com.sap.tc.logging.TraceFormatter(%25d[%6s]:%m)]/-->
    ENCODING[UTF8]/-->
    LOGHEADER[END]/--><br><br>
    Aug 31, 2010 3:20:10 PM  [Info  ]:DC API is trying to connect to 'host_name:50004'
    Aug 31, 2010 6:27:18 PM  [Error ]:[ Exception ]::SessionImpl::getContext():[get ctx. NamingException],cause=Exception during getInitialContext operation. Cannot establish connection to the remote server.<br><br>
    Regards<br>
    FX

  • Erorr " import javax.servlet.*"

    For every one!
    I use JDK1.4.0 to develope in Java . But when i study come to Servlet and when i import the library :
    "-----import javax.servlet.*---------"
    to explore the erorr that can't open this package. Now i don't know to answer this question.
    Can any one help me with this?
    Outside , these are some erorr for this , when i import this Package : Javax.servlet.*, ....
    Thanks for read my post.

    Here a direct answer to your question, cutting all the bullcraps that's meaningless to you, which other people told you on the forums you been looking at including this one:
    1. install j2ee, I think everyone is clear on that.
    2. there should be a page pop up after you finish the installation, and on top it says "Congratulations - You've Completed Installation!"
    3. If you don't see this page or you closed it b4 you realize you have a problem on the classpath, go to your j2ee folder and look under doc folder, it will be under the name (((((((about.html/htm))))))) whichever it is.
    4. Then look down about 20 lines including empty lines, there should be a link that says:
    "Your First Cup: An Introduction to the Java EE Platform: Provides detailed instructions for compiling and running your first program."
    If some varies from the instruction than your machine:
    1. make sure your system is compatiable with the version of java you installed, it will not run on some of the OS including some version of Windows last time i checked. XP and Vista should be okay i believe.
    2. recheck and make sure you done everything correctly.
    3. contact java support if there's one if you still think something is worng.
    (That's assuming you have no error messages while installing the program, if you not sure about that, reinstall it and note it carefully)
    And finally if you are too lazy to look through this instruction or still too dumb to figure this out:
    1. uninstall your j2ee.
    2. quit your job/school study/hobby as a programmer.
    3. choose a new job/school study/hobby.
    Took me 2 hours to figure this out while i'm watching youtube so shouldn't be hard once you find this step by step instruction.
    And also there's a lot of other goodies such as: Setting up a tomcat server, which got NOTHING to do with coding a java servlet page, it's a server you host the page on.
    And please read carefully on other people's comment before you reply so the person who wrote the original message won't be like "WTH is this guy talking about??$*@&!?"
    Good luck too you! :)

  • I received an error when trying to sync my IPOD erorr 13019

    I received an error when trying to sync my IPOD erorr # 13019

    See my response to your other post.

  • I receive "WorkflowCannotStartWorkflow" erorr, though the Project Type is not associated to any workflow!

    Hello,
    I keep receiving an erorr mesaage says "WorkflowCannotStartWorkflow" though the Project Type is not associated to workflow!
    Following is an image of the erorr mesaage:
    Any advise please ??

    thanks indeed for your replay.
    i am not sure what part of the ULS log you may need, but i copied all of the rows that mentioned "WorkflowCannotStartWorkflow"
    Line 7282: 03/10/2015 09:08:53.34 Microsoft.Office.Project.Server (0x0718) 0x2CEC Project Server Project Server Workflow tjpu Medium Error is: WorkflowCannotStartWorkflow. Details: Attributes: ebc3a7e8-ebc6-e411-a767-005056842187 Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.WorkflowStartWorkflowMessage 1 DontBlock . Standard Information: PSI Entry Point: Project User: i:0#.w|global\gerafia Correlation Id: e5c3a7e8-ebc6-e411-a767-005056842187 PWA Site URL: http://rdd.projects/PWA SA Name: Project Service Application PSError: WorkflowCannotStartWorkflow (35100), LogLevelManager Warning-ulsID:0x746A7075 has no entities explicitly specified. 9947f19c-a65a-803f-02b4-9b3da47dee50
    Line 7282: 03/10/2015 09:08:53.34 Microsoft.Office.Project.Server (0x0718) 0x2CEC Project Server Project Server Workflow tjpu Medium Error is: WorkflowCannotStartWorkflow. Details: Attributes: ebc3a7e8-ebc6-e411-a767-005056842187 Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.WorkflowStartWorkflowMessage 1 DontBlock . Standard Information: PSI Entry Point: Project User: i:0#.w|global\gerafia Correlation Id: e5c3a7e8-ebc6-e411-a767-005056842187 PWA Site URL: http://rdd.projects/PWA SA Name: Project Service Application PSError: WorkflowCannotStartWorkflow (35100), LogLevelManager Warning-ulsID:0x746A7075 has no entities explicitly specified. 9947f19c-a65a-803f-02b4-9b3da47dee50
    Line 7283: 03/10/2015 09:08:53.34 Microsoft.Office.Project.Server (0x0718) 0x2CEC Project Server General b0ry Medium PWA:http://rdd.projects/PWA, ServiceApp:Project Service Application, User:i:0#.w|global\gerafia, PSI: [ProjectServerError] Mismatched Attributes for PSErrorID WorkflowCannotStartWorkflow. List of defined attributes: none. List of provided values: ebc3a7e8-ebc6-e411-a767-005056842187, Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.WorkflowStartWorkflowMessage, 1, DontBlock., LogLevelManager Warning-ulsID:0x62307279 has no entities explicitly specified. 9947f19c-a65a-803f-02b4-9b3da47dee50
    Line 7305: 03/10/2015 09:08:54.35 Microsoft.Office.Project.Server (0x0718) 0x2CEC Project Server Queue Jobs ad3f2 Medium PWA:http://rdd.projects/PWA, ServiceApp:Project Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://rdd.projects/PWA: Group 36c4a7e8-ebc6-e411-a767-005056842187 correlation ebc3a7e8-ebc6-e411-a767-005056842187 type = WorkflowStartWorkflow failed at Message 1 Errors: WorkflowCannotStartWorkflow, GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified. 9947f19c-a65a-803f-02b4-9b3da47dee50

  • IPhone in Facebook show network erorr

    iPhone in Facebook show network erorr

    I know that for MacFamilyTree that you need to have the app running on the iPhone with a WiFi connection showing on the iPhone before the MacFamilyTree software on the Mac will recognise the iPhone at all. If you start the software on the Mac without the iPhone (or iPod Touch) MacFamilyTree app running then you will not see the iPhone (or iPod Touch - we use both too) at all.
    It may be there is another configuration issue, but it works just fine for us, although we have had a few panic-moments when we haven't had all the pieces in place at the same time.... It does work though when we do it right!
    I can't comment on Bento, but good luck with the MacFamilyTree!

Maybe you are looking for

  • Migratiion from oracle 7.3.4 to 8i

    I am working with a 7.3.4 database. I have existing reports made with oracle report 2.5. The reports are published using oracle report server and r25cgi32 (PDF files). The database will migrate to 8i. Can i still use report 2.5 and report server 2.5?

  • I can't register Quicktime Pro with Quicktime 7

    I am having a problem registering Quicktime Pro, in order to upgrade from Quicktime 7.  I have purchased the software and have typed reg name and code properly but it won't send after I typed it in.  Any help?

  • How to restart a message from beginning

    Hi, in our test-xi we have 10.000 failed message because of a mapping error. The problem is, that the receiver determination was wrong so the wrong interface mapping was startet. If I restart the failed messages, only the step "message mapping" is ru

  • Populate flex tree control on demand using HTTPService (Flex 3)

    First, I am sorry if the same post is already posted here but after spending 30 minutes or may be more I could not find the solution. By the way I have two problems. 1.) I am new to flex which I know if my own problem and soon I will handle it. 2.) T

  • Links open in a new browser instead of a new tab. I do have "open new windows in a new tab instead" ticked

    Hi I am using Windows 7 on my desktop and today my Firefox browser opens links from emails in a new browser instead of a new tab. I do have "open new windows in a new tab instead" , under tools; options, Tabs ticked. I have tried unticking it and the