ERP and Universe together in one HANA instance

Hello Experts,
Would ERP and SAP BO universe is recommended to work together in same HANA instance in productive environment ? I checked the SAP note 1826100 but not sure if this note covers SAP BO univese in the scope.
Thanks,
Jomerce

By the way, I do the same thing as you with sorting my podcasts by playcount, culling the ones I've already listened to, etc. I have two smart playlists that help me do this - one that displays unplayed stuff (playcount=0), and the other displaying played stuff (playcount not equal to=0 and listened to in the last week). I use the unplayed list for syncing to my ipod, and the played list for culling the library. I generally just option-delete the material from the played list unless I want to save it, in which case it removes itself from the list after a week goes by.

Similar Messages

Icon and text together in one column in alv list

Hello Everyone,
I want to display icon and text together in one column in ALV list.
I am using reuse_alv_grid_display function module.
Currently, i am able to see icon only in the column but i want to see both icon and text in one column in ALV.
Please let me know if this scenario is possible in ALV and how.
Thanks in advance.
Regards, Tarun

Hi,
Check this code....
REPORT ZTEST_ALV_CHECK     MESSAGE-ID ZZ           .
TYPE-POOLS: SLIS,icon.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
      IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
      L_LAYOUT TYPE SLIS_LAYOUT_ALV/
DATA: BEGIN OF ITAB OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      POSNR LIKE VBAP-POSNR,
      ICON(1),
     END OF ITAB.
SELECT VBELN
       POSNR
       FROM VBAP
       UP TO 20 ROWS
       INTO TABLE ITAB.
loop at itab.
if sy-tabix = 1 or sy-tabix = 2.
itab-icon = '1'.
elseif sy-tabix = 10 or sy-tabix = 20.
itab-icon = '2'.
else.
itab-icon = '3'.
endif.
modify itab index sy-tabix.
endloop.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-HOTSPOT = 'X'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_LAYOUT-lights_fieldname = 'ICON'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM       = SY-REPID
    IS_LAYOUT                = L_LAYOUT
    IT_FIELDCAT              = IT_FIELDCAT
TABLES
    T_OUTTAB                 = ITAB
EXCEPTIONS
    PROGRAM_ERROR            = 1
    OTHERS                   = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
vijay

Raw and jpg together as one picture in Lightroom 3

When I import the pictures from my camera I get my raw and jpg together as one image. But the pictures I already have in Lightroom 3 are divided into separate folders and show up as separate pictures. Is it possible to merge the raw and jpg together without importing them anew? I have put keywords on almost all my jpg in Elemenst 8 and don't want to do it again if I don't have to. It took me weeks to do.
Any help appreciated.

I have so much disc so t
he space they fill up is no problem. Also like to have the jpg's if a friend or so want's
to make copies of some of them.
But thanks for the link. Handy little program.

Mac and windows together on one computer

is it true that you can use both Mac OS X tiger v10.4 and microsoft windows in one computer, and do i have to buy a certain computer. im looking at either macbook or macbook pro. does it work on those?

Well I found with version 2.5 of parallels I was getting incredible amount of slow downs. I use parallels (and Fusion) for work, so 90% of my time is connected via a VPN connection. I'm not sure what was causing the slow downs but when I selected an explorer window or a IE window, the computer would freeze for about a minute. Additionally I had parallels crash my entire system, that is take out OSX too.
With VMware's Fusion (while still in beta), I'm getting better speed, better stability and none of that lockup/freeze up that I was getting from parallels. I was even using the same installed OS because vmware has a converter utility to create its own VM from a windows environment which I did within parallels so I'm comparing apples to apples, that is Fusion is not on a brand new installation.
I've been reading a lot of stuff on the parallels board about 3.0 which scared me completely away of trying that and I generally don't use the cohesion (or what ever they call it) technology for either VM.
Finally the support issue, parallels has a very bad reputation of not having good support where as VMware does.

Can Oracle 10g and Oracle 9i coexist and run together in one machine

Dear Friends,
I have installed Oracle 10g on my machine which already had Oracle 9i - 9.1.2.0 Release. Now the problem is that when i try to create a service name it gives me this error- ORA-12514: TNS:listener does not currently know of service requested in connect descriptor. To overcome this what i have done is that i have stopped the Oracle 9i listner and started the Oracle 10g listner, it is working after this but Oracle 9i service stpooed. Does this mean that Oracle 9i & 10g listner can't run together ? Or one has to stop the listner for one version to start another. The port number is same 1521 for both the listner. When i tried to change the port number still the same error comes as described above.
Kindly enlighten me,
Thanks & Regards,
Vinay

if you want to configure both listener (oracle 9i and 10g listener)
then u configure
listener9i on 1521 port
and other
listener10g is on 1522 port
also make changes in tnsnames.ora file
as
ora9i =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.16.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ora9i)
ora10g =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.16.1 )(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = ora10g)
thanks
Kuljeet pal singh

JList and Textfield together as one control

Hi
I want to create a control where i have a drop down list and also a textfield beside the list so that it appears as one control.The dropdown list should be visible only while typing and after selecting text from list i should be able to add some more text to it.How do i do it

I think u should select the component from Jlist which u want to change and set it to JtextField and change what ever u want and add that component back to the Jlist or overrride in the same place.
Thanks.

Memory and CPU load for one Oracle instance

I need to design a database server with 5 oracle instances.
Each instance have only 2 or 3 connected application users and the rate of transactions is about 10 transactions/hour.
How can I estimate to total memory and CPU needed for my server ?
The minimum esimation : 2x2Ghz and 2Go of RAM per instance is it pertinent ?
Dominik

Dominik wrote:
I need to design a database server with 5 oracle instances.
Each instance have only 2 or 3 connected application users and the rate of transactions is about 10 transactions/hour.
How can I estimate to total memory and CPU needed for my server ?
The minimum esimation : 2x2Ghz and 2Go of RAM per instance is it pertinent ?
DominikThough the picked specs look okay but the better answer, as being mentioned already, would be "it depends" . At this moment, almost all the machines are coming with very good specs so 2gb probably would be the least . You can even have a 4gb RAM system with x86_64 architecture , leaving room for future growth if needed. About setting the memory for the SGA, if the release is 11g, setting the Memory_Target would take care of the the memory allocation for both SGA and PGA and you can start by the default that Oracle picks which I guess is about 40% of the total RAM. Afterwards, you can monitor the performance and can bring down the memory settings if you feel its overly allocated.
That said, I think that this is a question better answered by the capacity planning and management people. I shall see if I can ask my friend, who is in this domain to comment on it.
Just my 2 cents.
Aman....

Install Access 2010 Full and Runtime together on one machine?

Hi,
a client at my company has many access database projects. They run mostly fine with Access Runtime. We provide the Apps with a Server 2008 R2 via Terminal Services as RemoteApp. Is there a way to install the Full Access Version parallel to the Runtime? So
if i publish a RemoteApp i just can choose between the two paths for Runtime or Full and provide the AccessApp either with one of both?
AFAIK if i install the full Version of Access 2010, it overwrites the Runtime and uses the same paths as the Runtime used before (something like C:\Program Files (x86)\Microsoft Office\Office14\MSACCESS.exe)
Thanks in advance for your hints,
Rolf

Hi,
Yes, of course you could install the Access 2010 and Access Runtime 2010 in the same machine.As you know the Access Runtime 2010's detail imformation, you could choose to distribute those Access 2010 solutions so that they run without requiring
a full installation.
And the Access 2010 full version is also included in Office 2010, you could choose only install the Access 2010 and change the install path by using OCT.
Regards,
George Zhao
TechNet Community Support

Mysap ERP and BW in one instance

Hello,
in the mySAP ERP 2004, Master Guide", chapter "Technical Overview" it is said that "ERP und BW in the same system ... can only be supported on a project basis".
This is difficult to understand for customers who are told that with mySAP ERP they will have "lower TCO through integrated SAP BW 3.5"
Can somebody explain with respect to the installation of BW 3.5 and ECC 5.0 in one instance
- why there are restrictions
- which problems have to be expected.
Are there any experiences?
Thanks!
Peter

hi,
-->"This is difficult to understand for customers who are told that with mySAP ERP they will have "lower TCO through integrated SAP BW 3.5""
that means mySAP ERP has install BW3.5 with R3 installation.
and BW work as a unique client in mysap ERP.And you can specify the BW client in table.
RSADMINA-->BWMANDT
if you work as a sales man ,you just can say" There is BW in mySAP ERP."

I imported pics to catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. Can I merge cats and will new path to source files be correct if when inporti

I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog? Will the new (Master catalog) have the correct link to the source file? If not, how or can this be done?
I have tried to explain my situation as clearly as I can. Do you understand my situation?
This maybe something you don’t have time to help me with. If not can you suggest somewhere I can get an answer? I really need help. PLEEEZZZ HELP ME.
Bruce Schuerman
Norman, OK
405_514-4875 (call collect)
[email protected]

I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog? Will the new (Master catalog) have the correct link to the source file? If not, how or can this be done?
I have tried to explain my situation as clearly as I can. Do you understand my situation?
This maybe something you don’t have time to help me with. If not can you suggest somewhere I can get an answer? I really need help. PLEEEZZZ HELP ME.
Bruce Schuerman
Norman, OK
405_514-4875 (call collect)
[email protected]

I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I'm not really sure how to get those source files back

I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog? Will the new (Master catalog) have the correct link to the source file? If not, how or can this be done?
I have tried to explain my situation as clearly as I can. Do you understand my situation?
This maybe something you don’t have time to help me with. If not can you suggest somewhere I can get an answer? I really need help. PLEEEZZZ HELP ME.
Bruce Schuerman
Norman, OK
405_514-4875 (call collect)
[email protected]

Is there any solution (other than buying
I really think 'buying' is the best solution on this one. Ideally, you would have at least five internal hard drives.
System
Projects
Cache/Scratch
Media
Exports
Use externals and network drive only for backup.

I am a new mac user and tried to update my firefox but now i have multiple foxes and a half fox fix something? how do i get it all together in one and be sure i have current version on only?

i am a new mac user and tried to update my firefox but now i have multiple foxes and a half fox fix something? how do i get it all together in one and be sure i have current version on only?

Hi there
I think in this case, you may be best to speak with Microsoft about this, as it does seem like an issue with Office, and not your Mac.
Follow this link, to find your local Microsoft Support contact number.
Or perhaps create a new topic in the Microsoft Support Communities
Good luck

TS4006 Hi I am having trouble updating my apps I have tried one at a time and all together but they just will not load any ideas would be appreciated

Hi, I am having trouble updating my apps, I have tried one at time and all together but they just keep on whirring away and nothing happens! any ideas woud be appreciated.

Suggest you update all these apps on iTune (computer) and sync them to your iPad.

How can i get the time and result together show in one Array or in Cluster?

hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
I post the time and voltge NOT together photo
Attachments:
12345.GIF ‏54 KB

You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
Message Edited by smercurio_fc on 10-17-2007 03:15 PM
Attachments:
pic.PNG ‏11 KB

Installing dev and quality BW system one one hana db

Hi Experts,
We are trying to install Dev and BW quality system on one HANA appliance. Please reply with any of the best practices and docs for this type of installations.
Thank you,
Praveen

Hi Praveen,
Hardware resources permitting, SAP supports running multiple HANA databases (or SIDs) on a single non-production HANA system.
While original HANA appliance is installed and delivered by your hardware partner with a single database, you could use SAP HANA Lifecycle Manager to install additional HANA databases on to the appliance. Of course, you need to ensure resources are available on existing appliance.
Few URLs towards MCOS and BW on HANA as follows:
SAP Note 1681092 - Multiple SAP HANA databases on one SAP HANA system
SAP Note 1666670 - BW on SAP HANA - landscape deployment planning
Multiple applications running on single SAP HAN... | SAP HANA
Few sizing notes for BW on HANA as follows, which will be of use:
SAP Note 1637145 - SAP BW on HANA: Sizing SAP In-Memory Database
SAP Note 1736976 - Sizing Report for BW on HANA
Post-installation, ensure to fine-tune configuration parameters to exploit optimum performance for each of the database running on the appliance
Wish you all the best towards your installation!
Best regards,
Shaji

ERP and Universe together in one HANA instance

Similar Messages

Maybe you are looking for