ERP EHP4 Installation Problem in Update Database registry Phase.

Hi,
We are installing ERP 6.0 EHP4 Ready SR1 on AIX6.1 (6100-03-01-0921)  and DB2 v9.1.0.7.
During installation in phase Update Database Registry, we are getting below error:
SQL1042C  An unexpected system error occurred
If any body has faced this error earlier, then please suggest.
Thanks
Sunny

Hi,
Please find below the latest entries in db2diag.log:
2009-12-14-20.15.17.555605-330 I25354A304         LEVEL: Event
PID     : 630830               TID  : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
DATA #1 : String, 43 bytes
System controller termination is completed.
2009-12-14-20.15.17.555785-330 I25659A383         LEVEL: Event
PID     : 630830               TID  : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:270
DATA #1 : String, 26 bytes
Active EDUs to be waited :
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0001                                  ....
2009-12-14-20.15.17.565945-330 I26043A381         LEVEL: Event
PID     : 630830               TID  : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
DATA #1 : String, 24 bytes
There is no active EDUs.
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0000                                  ....
2009-12-14-20.15.17.830570-330 E26425A301         LEVEL: Event
PID     : 630830               TID  : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
MESSAGE : ADM7514W  Database manager has stopped.
STOP    : DB2 DBM
2009-12-14-20.15.24.936396-330 I26727A1630        LEVEL: Event
PID     : 545014               TID  : 1           PROC : db2start
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
DATA #1 : String, 31 bytes
/db2/db2ged/sqllib/adm/db2star2
DATA #2 : Hexdump, 256 bytes
0x0FFFFFFFFFFF9C20 : 2F64 6232 2F64 6232 6765 642F 7371 6C6C    /db2/db2ged/sqll
0x0FFFFFFFFFFF9C30 : 6962 2F61 646D 2F64 6232 7374 6172 3200    ib/adm/db2star2.
0x0FFFFFFFFFFF9C40 : 4E4F 4D53 4700 0000 0000 0000 0000 0000    NOMSG...........
0x0FFFFFFFFFFF9C50 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C60 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C70 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C80 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C90 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CA0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CB0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CC0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CD0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CE0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CF0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9D00 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9D10 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
2009-12-14-20.15.25.077684-330 E28358A856         LEVEL: Warning
PID     : 602312               TID  : 1           PROC : db2star2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
MESSAGE : ADM12007E  There are "89" day(s) left in the evaluation period for
          the product "DB2 Enterprise Server Edition". For evaluation license
          terms and conditions, refer to the IBM License Acceptance and License
          Information document located in the license directory in the
          installation path of this product. If you have licensed this product,
          ensure the license key is properly registered. You can register the
          license via the License Center or db2licm command line utility. The
          license file can be obtained from your licensed product CD.
2009-12-14-20.15.25.174108-330 E29215A384         LEVEL: Warning
PID     : 667782               TID  : 1           PROC : db2wdog 0
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, routine_infrastructure, sqlerInitFmpTable, probe:30
DATA #1 : String, 16 bytes
agentCachingFmp:
DATA #2 : String, 3 bytes
OFF
DATA #3 : String, 5 bytes
Flag:
DATA #4 : Boolean, 1 bytes
false
2009-12-14-20.15.26.288917-330 E29600A1208        LEVEL: Event
PID     : 602312               TID  : 1           PROC : db2star2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W  Database manager has started.
START   : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2ged" uses "64" bits and DB2 code release "SQL09017"
with level identifier "02080107".
Informational tokens are "DB2 v9.1.0.7", "s090308", "U823509", Fix Pack "7".
DATA #2 : System Info, 224 bytes
System: AIX gpldeve1 1 6 00C1EF854C00
CPU: total:8 online:4 Threading degree per core:2
Physical Memory(MB): total:14336 free:10662
Virtual  Memory(MB): total:35328 free:31640
Swap     Memory(MB): total:20992 free:20978
Kernel   Params: msgMaxMessageSize:4194304 msgMaxQueueSize:4194304
                 shmMax:68719476736 shmMin:1 shmIDs:131072
                 shmSegments:68719476736 semIDs:131072 semNumPerID:65535
                 semOps:1024 semMaxVal:32767 semAdjustOnExit:16384
Cur data size (bytes)  = 0x7FFFFFFFFFFFFFFF
Cur stack size (bytes)  = 0x7FFFFFFFFFFFFFFF
Cur core size (bytes)  = 0x0000000077359400
nofiles (descriptors)  = 0x7FFFFFFFFFFFFFFF
2009-12-14-20.18.03.426764-330 E30809A597         LEVEL: Warning (OS)
PID     : 544840               TID  : 1           PROC : db2set
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqcurdir, probe:100
MESSAGE : ZRC=0x840F0001=-2079391743=SQLO_ACCD "Access Denied"
          DIA8701C Access denied for resource "", operating system return code
          was "".
CALLED  : OS, -, unspecified_system_function
OSERR   : EACCES (13) "Permission denied"
DATA #1 : File name, 0 bytes
Object not dumped: Address: 0x0FFFFFFFFFFFE688 Size: 0 Reason: Zero-length data
2009-12-14-20.18.03.429260-330 I31407A290         LEVEL: Event
PID     : 544840               TID  : 1           PROC : db2set
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, oper system services, db2set_main, probe:40
CHANGE  : CFG DB2SET: DB2_WORKLOAD: From: "SAP" To: "SAP"
Thanks
Sunny

Similar Messages

  • Problem install EHP2 NW (DB2) "update database registry"

    Hi, I have problem install EHP2 NW Solaris and db2. in the phase "update database registry".
    the log is:
    Unable to access application /db2/db2epd/sqllib/adm/db2set. No such file or directory
    Failed action:  with parameters
    Error number 0 error type SPECIFIC_CODE
    S.O:
    In the directory /db2/db2epd
    server: ls
    db2_software
    only found this file. not such file sqllib.
    what happend??
    help please.

    Hi,
    What is your Operating system ?
    Please make sure that file system should not be created with cio option but with rw option.
    Thanks
    Sunny

  • Installation error at Update database statistics

    Hi,
    During DB installation at Update database statistics Installation error.
    Error shows that
    MTU- 03010 Execution of the command "/sapmnt/QMS/exe/brconnect   '-u' '/' '-c' '-f' 'crsyn -o 'SAPQMS' finished with status TST_ERROR
    brconnect.log error
    /usr/lib/hpux/dld.so: Unable to to find library 'libclntsh.so.10.1
    Any help.
    - Kristene

    Hello kristene Jyo,
    Did you get any breakthrough in this issue. Because i am also facing the same issue while installling the NW04 with oracle 9.0.2.0 but during "Update Statistice" step of Database instance installation it is giving me below error.
    "Unable to find library 'libclntsh.so.10.1"
    I already have 3 instance running fine on the same server of ECC 5.0 which i installed with oracle 9 same database.
    Please help me if you have any clue about the same my OS is HPUX-11.23.
    Thanks and Regards
    Dheeraj Thareja

  • Problem in update database statistics

    when i run
    update database statistics
    when it completed it becomes red
    then i check it out
    log file  there i found error
    BR0301E SQL error -904 at location stats_ind_collect-3, SQL statement:                                                                       
    'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPECC"', INDNAME => '"SNAP~0"', ESTIMATE_PERCENT => NULL, DEGREE => NULL, NO_INVALIDATE => FALSE); END;                                                                      
    ORA-00904: : invalid identifier                                                                               
    ORA-06512: at "SYS.DBMS_STATS", line 10621                                                                               
    ORA-06512: at "SYS.DBMS_STATS", line 10645                                                                               
    ORA-06512: at line 1                                                                               
    BR0886E Checking/collecting statistics failed for index SAPECC.SNAP~0                                                                        
    BR0280I BRCONNECT time stamp: 2009-11-03 10.56.12                                                                               
    BR0301E SQL error -904 at location stats_ind_collect-3, SQL statement:                                                                       
    'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPECC"', INDNAME => '"SNAP~DSX"', ESTIMATE_PERCENT => NULL, DEGREE => NULL, NO_INVALIDATE
    ORA-00904: : invalid identifier                                                                               
    ORA-06512: at "SYS.DBMS_STATS", line 10621                                                                               
    ORA-06512: at "SYS.DBMS_STATS", line 10645                                                                               
    ORA-06512: at line 1                                                                               
    BR0886E Checking/collecting statistics failed for index SAPECC.SNAP~DSX                                                                      
    what will i do
    please suggest something

    Hi Anant ,
    I think you need to update your brtool patch as described in [Note 874911 - Workaround for ORA-31603 (BR0996E) during reorganization|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=874911].
    Hope it will solve your problem as it is due to bug in oracle.
    Regards,
    Gagan Deep Kaushal

  • ERP 6 installation Problem on windows clustring

    i am installing SAP ERP 6 EHP4 on windows 2003 with clustering 2 nodes only and DB as MS SQL 2005. i have Domain controller on one node and other is member of it , i want ACTIVE/ACTIVE clustering , so i installed MS SQL on one node and on other node i installed ASCS from SAP High Availability environment, and now i am configuring the first NODE on MSCS step ,here after accepting the password of the two domain user , it gives the problem:-      ****************************         
    Number value 0x-3f580000 is bigger than 0xFFFFFFFF      *******************************
    the last lines of sapinst.log files are like this :-       *******************************
    INFO 2010-08-18 14:13:31.984
    Execute step dAskForKernelDVD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:01.298
    Execute step dAskForSecondKernelDVD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:01.314
    Execute step dAskForuserDomain of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:03.126
    Execute step dBuildAccountInformation of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:03.142
    Execute step dAskForUserPAsswords of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
    INFO 2010-08-18 14:14:32.143
    Execute step dCollectMSCSNodesInformations of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0
    INFO 2010-08-18 14:14:32.174
    Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0
    WARNING[E] 2010-08-18 14:14:32.174
    MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
    ERROR 2010-08-18 14:14:32.268
    FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
    INFO 2010-08-18 14:14:44.237
    An error occured and the user decided to retry the current step: "|MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters" .
    WARNING[E] 2010-08-18 14:14:44.253
    MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
    ERROR 2010-08-18 14:14:44.268
    FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
    INFO 2010-08-18 14:14:44.878
    An error occured and the user decided to retry the current step: "|MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters" .
    WARNING[E] 2010-08-18 14:14:44.893
    MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.                     
    Help Me if you can thank you in advance

    >> i am installing SAP ERP 6 EHP4 on windows 2003 with clustering 2 nodes only and DB as MS SQL 2005. i have Domain controller on one node and other is member of it
    Installations on domain controllers are not supported:
    Installation guide "2.2.4 Requirements for a High-Availability System":
    <...>
    You cannot use a host with a domain controller as an MSCS cluster node.
    <...>
    It's pretty clear why: If the first node, the domain controller, fails, the second node can't authenticate any more and hence the system won't start/run.
    Markus

  • EHP4 installation - problem with stack files

    Hello all,
    I installed ERP 6.0 EHP4 ready and would like to install EHP4 with sapehpi.
    I have a problem with my XML stack files because it contains kernel 69 for all os and db.
    This stack file has been generated in the MOPZ and MOPZ don't ask me to select kernel files.
    I don't see the option Select OS/DB-dependent files in MOPZ.
    Solution Manager version is 7.01 SPS23
    What would be the solution?
    Thanks in advance.
    Best Regards,
    Olivier

    Hello Markus,
    Thanks for your answer.
    I fixed the problem by executing once again the following activity in spro. Really strange because I already did it and got the message that the activation was successfull. Anyway if someone encounter this problem, please do the following:
    1. Perform IMG activity "Configuration of Extended Functions" (IMG Activity Key: SOLMAN_MOPZ_SLM_CONF), which is delivered as of ST400 SP15.
    a) Call transaction code SPRO.
    b) Click button "SAP Reference IMG"
    c) Use CTRL+F and input "Configuration of Extended Functions" to search for the IMG activity
    Noet this: as from ST 400 SP19, use CTRL+F and input "Maintenance Optimizer" to search the IMG activity group, under this group, there is the IMG activity "Configuration".
    d) Perform it.
    e) If this IMG activity is not available due to a low support package level, see SAP Note 1090202 for manual configuration.
    Best Regards,
    Olivier

  • Problem with updating database

    Hi, gurus. here is the snippet of my program, dont know why it doesnt work properly.
    //this the first java bean, storing user's form inputs
    public class FirstPageBean
      private String userName;
      private String docType;
      private int index;
      public FirstPageBean()
           userName = "admin";
           docType = "book";
           index = 0;
      public void setUserName(String name) {userName = name;}
      public String getUserName(){userName = userName.trim(); return userName;}
      public void setDocType(String docType){this.docType = docType;}
      public String getDocType(){docType = docType.trim(); return docType;}
      public void setIndex(int index){this.index = index;}
      public int getIndex(){index = index.trim(); return index;}
    //the second java bean is basically the same fashion as the first one.
    The problem is in the following sinppet of the third java bean.
    Instead of instoring the user's inputs into a table in my database,
    what i actually get from this entries are all their default values,
    like "admin" for userName, "book" for docType etc. The first and
    second bean have been tested and they successfully instored user's
    inputs into their conresponding properties. But i just cant figure
    out why these values are not successfully retrived from the
    ControllerBean.
    public class ControllerBean
       //blah blah....
       public void update(){
       String userName = new FirstPageBean().getUserName();
       String docType = new FirstPageBean().getDocType();
       int index = new FirstPageBean().getIndex();
       Connection conn = connect();
       PreparedStatement stat = conn.prepareStatement("insert into movie values (?,?,?)");
                    stat.setString(1, userName);
                    stat.setInt(2, index);
                    stat.setString(3, docType);
       stat.executeUpdate();
    }Any help would be deeply appreciated. thanx in advance.

    Wherever it is that you accept input from the user for the three values, assign them to the three fields you use for the SQL statement.
    If you really want to use the getXxx and setXxx methods, instantiate a single FirstPageBean and use the setXxx methods.
    FirstPageBean FPB = new FirstPageBean();
    FPB.setUserName( userNameFromInput );
    FPB.setDocType( docTypeFromInput );
    FBP.setIndex( indexFromInput);
    Connection conn = connect();  
    PreparedStatement stat = conn.prepareStatement("insert into movie values (?,?,?)");               
    stat.setString(1, FPB.getUserName);               
    stat.setInt(2, FPB.getIndex);               
    stat.setString(3, FPB.getDocType);  
    stat.executeUpdate();I haven't compiled this but you should get the idea.
    HTH
    Walk Good

  • Installation problem of update iTunes 11.1.4 for Windows XP

    I am a Window XP user and currently using IE 8. After I update your iTunes 11.1.4 for Windows XP, my PC is cannot open the i-Tunes and has a problem of "R604" of run C runtime Library. Please Help!!!

    Hello n9ming29,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • Problem in update database record with torque

    Can anybody correct my mistake. please........
    Torque.init("E:/Upendra_working_directory/msh2.0/Torque.properties");
    System.out.println("State:     " + Torque.isInit());
    System.out.println("Connection Sucessfully........");
    Criteria crit = new Criteria();
    crit.add(AttachmentPeer.DISPOSITION, "buildfail09.xml");//selecting particular record
    List attachment = AttachmentPeer.doSelect(crit);
    System.out.println(attachment.size());
    Attachment obj = (Attachment)attachment.get(0);
    System.out.println("Attachment Location:     "+ obj.getAttachmentName());
    System.out.println("Attachment MessageID     "+ obj.getMessageId());
    obj.setAttachmentName("sssss"); //setting new value
    AttachmentPeer.doUpdate(obj); //update
    obj.save();
    System.out.println(Attachment Location:     (afterupdate)"+ obj.getAttachmentName());
    console print updated value.but if i check the table in database, it is not updated.
    Thanks in advance

    For anyone referencing this... I had missed adding the field to the MapBuilder so I can definitely suggest that you check the field is present everywhere it should be as no errors will be found if its only looking for the first 4 fields but you want 5 fields to be updated!!

  • Strange problem when updating database

    I have an odd problem with a small application that is written in VB.NET, reading from and updating an SQL Express 2012 server.  The app pulls a datareader from a view and then loops through it and sends each record to an offsite db via an http post. 
    It then goes and marks the record sent using an update query to set a sync bit value in the main key table.  It then goes to the next record in the reader and repeats the process (or that was the idea). 
    What happens when it runs is that the update operation fails with a “Connection timeout or server instance not found “ error.  I have checked the usual culprits, it connects to the server to retrieve the reader OK using the same connect string, the
    user in the connect string has appropriate permissions to the table in question, etc.  The event log only shows an unhandled exception, the timeout message appears in the local debugger.  The exact same update runs successfully on another table for
    a different operation and on my dev machine, so it seems to be something about that particular table. 
    If I log in to SQL management studio as the user that I have in the connection string and update a record in the table using the same syntax as the update query in the application it succeeds.  Very strange.
    Troubleshooting is somewhat complicated by a need to be very careful with the machine that the problem is occurring on.  It is an in-production machine that I can only access via Logmein and is a 20 hour plane flight away.  So I have to be very
    cautious not to bork it up.  Any thoughts on how to proceed?

    I have an odd problem with a small application that is written in VB.NET, reading from and updating an SQL Express 2012 server.  The app pulls a datareader from a view and then loops through it and sends each record to an offsite db via an http post. 
    It then goes and marks the record sent using an update query to set a sync bit value in the main key table.  It then goes to the next record in the reader and repeats the process (or that was the idea). 
    What happens when it runs is that the update operation fails with a “Connection timeout or server instance not found “ error.  I have checked the usual culprits, it connects to the server to retrieve the reader OK using the same connect string, the user
    in the connect string has appropriate permissions to the table in question, etc.  The event log only shows an unhandled exception, the timeout message appears in the local debugger.  The exact same update runs successfully on another table for a
    different operation and on my dev machine, so it seems to be something about that particular table. 
    If I log in to SQL management studio as the user that I have in the connection string and update a record in the table using the same syntax as the update query in the application it succeeds.  Very strange.
    Troubleshooting is somewhat complicated by a need to be very careful with the machine that the problem is occurring on.  It is an in-production machine that I can only access via Logmein and is a 20 hour plane flight away.  So I have to be very cautious
    not to bork it up.  Any thoughts on how to proceed?

  • Problem in updating  Database

    Hi to all users
    When i'm updating a field in database using Set Method, it's not reflected in the database, when i call get Method i get the new value. Why it's so.
    Thanks in advance

    hi filipjava
    I'm able to insert the values to the database but i haven't tried yet deleting it. Return type of ejbCreate is void in my bean. Why should it return null. I'm using two PK class. for inserting and updating. Here is my PK class Code.
    public class WBSUpdatePK implements java.io.Serializable {
    public String wbs_id;
    public WBSUpdatePK(){
    public WBSUpdatePK(String wbs_id){
    this.wbs_id = wbs_id;
    public boolean equals(Object obj)
    if (obj instanceof WBSUpdatePK)
    WBSUpdatePK c = (WBSUpdatePK)obj;
    if (c.wbs_id == null)
    return wbs_id == null;
    return c.wbs_id.equals(wbs_id);
    return false;
    public int hashCode()
    System.out.println("inside hashcode"+wbs_id.hashCode());
    return wbs_id.hashCode();
    public String toString(){
    return wbs_id.toString();
    }

  • Problem during updating database

    Hi,
      I am creating purchase order for a material, system allows me to create the one and if i save system gives the order number also,  but if i check the same in display or change it says no document exists and gives the info message
      " Express document update was terminated received from the author abap"
    system gives the message almost all the time
    what may be the probable cause?????
    Pavan

    Hi,
    I think some custom modification has been done . Check that part may be that modification is not working properly,
    Thanks
    Dipak

  • Installation stuck at Create database schema Phase 13 of 27

    Hi
    I am installing the Netweaver 7.01 SP3 and have already removed it completely after getting stuck at the same installation step. Do not know what is going wrong. A small extract of the log is shown below. Any advice on how to proceed will be helpful. I know when einstalling it has to be removed completely which I did using uninstallation and then clean up tool. But again it is stooping at the same step. I had let it run more almost two days but of no use. My system configuration is good enough with 2GB RAM etc.
    INFO       2009-03-12 16:52:00.443 [synxcpath.cpp:807]
               CSyPath::createDirectory()
    Creating directory C:\sapdb.
    INFO       2009-03-12 16:52:00.458 [synxcpath.cpp:807]
               CSyPath::createDirectory()
    Creating directory C:\sapdb\NSP.
    INFO       2009-03-12 16:52:00.458 [synxcpath.cpp:807]
               CSyPath::createDirectory()
    Creating directory C:\sapdb\NSP\saplog.
    INFO       2009-03-12 16:52:00.474 [synxcpath.cpp:807]
               CSyPath::createDirectory()
    Creating directory E:\sapdb\NSP\sapdata.
    INFO       2009-03-12 16:52:01.67 [sixxcstepexecute.cpp:790]
    Execute step sdb_create_db_instance of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
    File sapdb.inf does exist. Will use the commands in file sapdb.inf.
    INFO       2009-03-12 16:52:06.544 [sixxcstepexecute.cpp:790]
    Execute step sdb_init_instance_type of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
    INFO       2009-03-12 17:12:38.722 [sixxcstepexecute.cpp:790]
    Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO       2009-03-12 17:12:39.883 [sixxcstepexecute.cpp:790]
    Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    Also see log browser from the installation window............................
    Please see below as it is geeting stuck at
    component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
    Mar 12, 2009 5:12:35 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 &gt; SAP Application Server ABAP &gt; MaxDB &gt; Central System &gt; Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component  current="true"><![CDATA[Create users for SAP system]]></component><component  current="true"><![CDATA[Install common system files]]></component><component  current="true"><![CDATA[Unpack SAP archives]]></component><component  current="true"><![CDATA[Install SAP Cryptographic component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="99" total="216"/>
    <button sid="btPREV" default="false" enabled="false" ><caption>&lt; &amp;Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&amp;Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
    Mar 12, 2009 5:12:35 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst [Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="100" total="216"/>
    <button sid="btPREV" default="false" enabled="false" >
    vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 &gt; SAP Application Server ABAP &gt; MaxDB &gt; Central System &gt; Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component  CDATA[Prepare database schema for ABAP]]></component><component  current="true"><![CDATA[Create database schema]]></component><component ><![CDATA[Create sequence for the ABAP user]]></component><component ><![CDATA[Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="104" total="216"/>
      [Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
    <button sid="btPREV" default="false" enabled="false" ><caption>&lt; &amp;Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&amp;Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
    Mar 12, 2009 5:12:39 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><update><updateitem><dialogstatus><![CDATA[ ]]></dialogstatus></updateitem></update></sapinstgui>
    Mar 12, 2009 5:38:16 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog severity="FLOW TRACE" filename="" version="1.0"/>
    Mar 12, 2009 5:38:16 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstlog version="1.0" append="false" filename="C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\sapinst_dev.log"/>
    Mar 12, 2009 5:43:59 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
    Mar 12, 2009 6:08:17 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
    Mar 12, 2009 6:30:31 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
    Thanks in advance
    Vikas

    Guess you are talking about sapinst.log file. Below are the last few lines after which it did not proceed
    Do see the last step create DB schema....... The previos log was from sapinst_dev.log 
    Oliver I have a doubt could it be becuase of the host name.
    The host name of my machine is "skumar278-1" with DNS domain name for SAP system "asiapac.globalcsc.net"
    Could this be the reason for the problem i am facing i.e installation getting stuck at phase 13 Create DB schema.... Other than this I cannot see anything else which can go wrong.. Do have the DHCP server available..
    The page file as per the ram settings i.e for 2 GB should be 3072 so I have set it to the same. Though
    the prerequisite page shows
    "For the selected services at least 7138 MB swap space are recommended. Current value: 2851 MB. (Updated 2005-06-24)"
    Can this be the reason???
    Also I just looked at the services file.. there are about about 4-5 different files with the name services .3 services.4 ...  services.5 etc als there is no entry for port 3900 3600 & 8000.. .. do not know what to do... Please suggest..
    INFO 2009-03-12 17:12:35.412
    Execute step CheckDbExistence of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO 2009-03-12 17:12:35.726
    Execute step check_dbm_dba_user_passwd of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO 2009-03-12 17:12:37.718
    Execute step StartDb of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO 2009-03-12 17:12:38.722
    Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO 2009-03-12 17:12:39.883
    Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0

  • Installation problem :- SAP 4.7 on Linux RHEL 4

    Hi,
    I am installing SAP 4.7 SR1 on Linux   RHEL Sever 4 on Test system which have one remote window desktop.
    I have successfully installed central instance by using the putty from remote desktop.
    But while installing Oracle 9.2 from remote desktop I am getting the following error message.
    <b>ERROR:-</b>
    /<b>oracle/stage/920_32/Disk1/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.4081: Done
    harshal:orahsd 12> Initializing Java Virtual Machine from ../../stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux/bin/java. Please wait...
    Error occurred during initialization of VM
    Unable to load native library: /oracle/stage/920_32/Disk1/stage/Components/oracle.swd.jre/1.3.1.0.0/1/DataFiles/Expanded/jre/linux/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference</b>
    I have got 2 solution for same on sdn.sap.com apart from that as per one solution I have change the location of java (i.e. j2re1.4.2_13 ) in following file
    File :- oraparam.ini
    which is located in directory  /oracle/stage/920_32/Disk1/install/
    But it’s not working in my cases  I am getting new error message while executing ./runInstaller
    <b>ERROR:-</b>
    <b>harshal:orahsd 12> Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using '130.10.10.9:0.0' as the value of the DISPLAY variable.
            at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
            at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
            at java.lang.Class.forName0(Native Method)
            at java.lang.Class.forName(Unknown Source)
            at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown           Source)
            at java.awt.Window.init(Unknown Source)
            at java.awt.Window.<init>(Unknown Source)
            at java.awt.Frame.<init>(Unknown Source)
            at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
            at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
          at  oracle.sysman.oii.oiif.oiifm.OiifmMainFrame.<init>(OiifmMainFrame.java:296)
            at oracle.sysman.oii.oiic.OiicInstaller.<init>(OiicInstaller.java:231)
            at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:599)</b>
    So please let me know how solve this problem.
    Thanks a lot ,
    Harshal
    SAP BASIS

    Hi,
    Thanks for your help on last error. I have followed same step and my SAP 4.7 installation on Linux goes into next step.
    Now my installation into the update database statistics phase  and I am getting the following error.
    <b>MUT-03010  Execution of the command "/sapmnt/HSD/exe/brconnect -u / -c -f crsyn -o SAPETS" finished with status TST_ERROR.
    brconnect finished with status TST_ERROR
    /usr/lib/hpux64/dld.so: Unable to find library 'libclntsh.so.9.0'.</b>
    On this error we have 2 solutions as per my knowledge either I need to change the Oracle client software from 9.2 to 10 or I need to change brtools version from 7.00 to 6.40.
    I need to know which one is the best.
    Moreover can you please let me know what effect I mean to say if we execute ./control.xml as per last mail from Elmar what process SAP system did ?
    Apart from this I need to know how to create following links manually?
    ldd /sapmnt/ETS/exe/brconnect  :-
            libnsl.so.1 =>  /usr/lib/hpux64/libnsl.so.1
            libpthread.so.1 =>      /usr/lib/hpux64/libpthread.so.1
            libm.so.1 =>    /usr/lib/hpux64/libm.so.1
            libclntsh.so.9.0 =>     /oracle/client/92x_64/lib/libclntsh.so.9.0
            libwtc9.so =>   /oracle/client/92x_64/lib/libwtc9.so
            libstd_v2.so.1 =>       /usr/lib/hpux64/libstd_v2.so.1
            libCsup.so.1 => /usr/lib/hpux64/libCsup.so.1
            libunwind.so.1 =>       /usr/lib/hpux64/libunwind.so.1
            libc.so.1 =>    /usr/lib/hpux64/libc.so.1
            libdl.so.1 =>   /usr/lib/hpux64/libdl.so.1
            libxti.so.1 =>  /usr/lib/hpux64/libxti.so.1
            libwtc9.so =>   /oracle/client/92x_64/lib/libwtc9.so
            librt.so.1 =>   /usr/lib/hpux64/librt.so.1
            libnss_dns.so.1 =>      /usr/lib/hpux64/libnss_dns.so.1
            libuca.so.1 =>  /usr/lib/hpux64/libuca.so.1
    Thanks a lot,
    Harshal

  • IDES/DB6/Win - Installation phase (Update Database Configuration) is slow??

    To whom it may concern,
    I am currently installing IDES ERP 2005 on Windows 2003 with database as DB6 with 1GB Ram and 1 CPU P4. 4GHz
    However, I found that the phase Update Database Configuration phase is running very slow and sapinst growth very large (>500 MB) while no error found in the dbdump file.
    I checked the view log from Netweaver Installer and showing TRACE
    see that the message DB6_NODES_WORK > undefined < found keep repeating whereas no other message found. Please advise if you encounter this before and advise if anything can be done.
    Regards,
    Billy

    This phase started from 3 pm and still running till now 6 pm (3 hours)
    previously, it was running for 2 hours before termination.
    By the way, I found that the sapinst keep repeat the following to the sapinst_dev.log
    TRACE      [iaxxejsexp.cpp:199]
               EJS_Installer::writeTraceToLogBook()
    DB6: partition: >undefined< found
    while the task manager showing that the cpu was utilize from 11% to 100% from time to time (indicate something is running).
    Regards,
    Billy

Maybe you are looking for

  • Working with image sizes/copy and paste

    I have two different jpeg files open in photoshop cs4, one is 72 ppi, 8 inches wide by 6 inches tall at 16.67% zoom. The other is about 60 inches wide by 45 inches tall, 72 ppi, at 100% zoom. I was wanting to take an element (a person) out of the 8x6

  • Why can't i get on icloud?

    My icloud is not working. Is this happening to anyone else? I cannot get into my email.

  • Anyone have a single report or dashboard with proposals / projects together

    While doing portfolio rationalization, we are seeking a single report or dashboard with proposals / projects together. We need to know what our planning horizon looks like based on our active projects along with the proposals. Does anyone have sugges

  • Transformer.transform(xmlIn, new StreamResult(out)) throws java.io.IOExcept

    Hi, While doing xsl transformation of xml, I am getting IO Exception in windows alone. The code looks like: import javax.xml.transform.Transformer OutputStream out = new ByteArrayOutputStream(); Transformer.transform(xmlIn, new StreamResult(out)); wh

  • Newbie File Management - with a focus on Backup/Archive

    Hi, I apologize if this question is a "stupid" one... but I'm a "newbie" to a lot of the professional-level issues addressed here. I'm VERY interested in LR as a way of moving up from iPhoto as my image management application. I've gotten a lot more