ERP - EWM connection

HI all,
someone can help us about the connection between the system SAP ERP and EWM (SCM)?
We have to create the inbound delivery process; we are creating in ERP the purchase order and the delivery and we are expecting that, at saving of the delivery, the notification of the document has to be sent to EWM.
In this moment we are using a function module /CWM/SHP_OBDLV_SAVE_REPLICA in ERP, but this FM calls some parameters that are not recognized in EWM.
The error that the system provides is: Incorrect function module /SCWM/IDOC_INPUT_IBDLV_SAVEREP called up.
Thanks in advance
Antonella

Hi,
besides that Brock is right (the ERP side is OBDLV, the EWM side IBDLV?), this FM is for activated Catch Weight Management, yes? Did you activate CWM on the EWM side as well?
And sorry, no, I am afraid there is not too much I can help you online - after all, you can come in one of my EWM classes ;-).
Best regards
Juergen

Similar Messages

Generate Distribution Model ERP = EWM

HI
I am performing Generate Distribution Model ERP => EWM for new WH. Getting below error message.
Method BUS2015.SAVEREPLICA exists in model view WMS
Message no. BDDISTMODEL051
Please Help to resolve as early
Rgds
Dinesh.P

Hi Dinesh,
When you are trying to Generate Distribution Model for your warehouse that time there are three fields one of those is your ERP warehouse number and Second is Logical System of EWM and third one is Distribution Model view. You might have entered a wrong model view name and then you tried to execute, system is giving you error that ".... method exists in model view WMS" that means you need to enter WMS model view in third field and then execute with radio button selected CREATE ENTRIES along with BOTH radio button selected.
Thanks and regards
Anoop Singh

Can more than one SAP ERP system connect to the same PI system?

HI Experts
Well i am new to SAP Process Integration 7.1 and i have managed to point PI system to SAP DEV ERP , but i also want to add these other 2 systems SAP QAS ERP and SAP PRD ERP Using RFC Adapter. So is it possible to integrate SAP QAS and SAP PRD ERP into the same PI system that is pointing to SAP DEV ERP. If possible what are the configuration steps that i should follow?.
This project implementation is based on SAP MDM 7.1/ SAP PI 7.1/ ECC EHP6.

Hi Farai,
Technically this is possible. But don't forget that all systems are then using the same ESR and ID. So changes on PI are also influencing ERP QAS and PRD. I don't recommend this. At least you should have 2 stages for PI: Development and QAS/PRD.
You just need to maintain 2 connections in ERP: ESR connection and RFC connection. For using the interfaces in PI for all 3 stages you need to create 3 different configurations in Integration Builder of PI.
Best Regards
Harald

ERP - EWM Integration

When I try to integrate ERP and EWM .I get error message as "No business partner found for ERP partner 0000003000 (role:WE)". What is the peice of config missing to get rid of this error. Due to this I could not see the outboud delivert request created.

Thanks for your response. I implemented both the notes , but still I run into the same issue. I could not create ODR. I goet below error messages when I distribute the o/b delivery:-
Text profile does not exist /SCDL/AF_TD
An error occurred during validation of the object /SCDL/ADAPTER_MP
Also I verfied the tables listed with another note 1247701.
FYI... I could create the ODO(outbound delivert order) using /scwm/PRDO.
Anything goofy Iam doing in the integrtaion peice to create ODR?.
Thanks

Error in inbound delivery replication ERP - EWM

Hi,
We have recently installed SAP ERP 6 EhP 6 and EWM 7.0 Ehp2 Add-On
Now, we are not being able to replicate Inbound Delivery from ERP to EWM.
As we save the ID in ERP we are getting a message that the ID has been distributed.
But the document is getting stuck in the RFC queue.
In SMQ2 the particular queue gets the status "SYSFAIL" with the error message "Function module does not exist or EXCEPTION raised. Message no. SY359"
The function module field contains "/SCWM/INB_DLV_SAVEREPLICA"
The status message says: "CREATE DATA: The document /1DF/_PDI000 is no... "
I've properly defined the standard BAPI destination and I've checked note 1398474.
Please help me get out of this mess.
Regards,
Oritra

Hi Oritra
As per my knowledge I haven't see this issue and table you are asking are not found as requirement in system without which delivery is able to replicate in EWM.
Also try to create new delivery in ECC and send... As you was checking in SMQ2 it means
"The status message says: "CREATE DATA: The document /1DF/_PDI000 is no..." it means after sending your delivery from ECC it is coming to back to the system where you are checking inbound queue and trying to create delivery.
That time it find NO range for delivery , so see number range assignment or number range maintenance and refusing to create delivery.
so update Number range and assignment properly for ID in EWM system and check new flow.
if resolved dont see below points.
please provide more infrmation of below error from SLG1. keep some extra selection time zone.
1. Do you have same or different client. As per above your description my understanding was same client (ECC and EWM).
If you have different client then your ECC WM parameter under EWM interface makes ur delivery move to EWM system with distribution model created with BAPI replica.
As I do not have ur system my second option will be try to check above setting and if not try to push in debug mode to see proper code.
As per my knowledge I haven't see this issue and table you are asking are not found as requirement in system without which delivery is able to replicate in EWM.
Regards
Suraj

How to configure the RFC destination of ERP-CRM connection when moving to Q

Hi Experts,
I set up a ERP sales order and quotation in CRM but under configuration
Customer Relationship Management -->Transactions -->Settings for Sales Transactions -->Define Profile for ERP Sales Transactions
you can only configure one which is i already did in development now we are moving to Quality then next to Prod.
Do you mean we will change this everytime we move to different environment thanks in advanced
Br,
Etrafanob

Hi Etrafanob,
Yes, in each system you will have to change the RFC destination for this as the destination set in your development system will normally be transported through to QA and production. To make the change you will need to contact your basis team and request the system client to be open for configuration changes in transaction SCC4.
I hope this helps.
Regards,
David.

Check Connection of Communication Arrangement for SAP ERP Financials Using IDoc Failed

Dear experts,
We are checking outbound connection from C4TE to ERP in Communication Arrangement for SAP ERP Financials Using IDoc Failed.
We get the attached error message:
Checking connection failed
Error accessing service; Service Ping ERROR: Forbidden (403)
What could be the reasons, in ERP side, through Tcode SMICM, we didn't see any log from C4TE side, and we cannot ping the ERP side successfully.
One more thing, in C4TE, we tried to set the connection to an SAP internal ERP system, and the connection was successful. But when relinked to the customer ERP system, connection failed.
Could it be firewalls reason?
Thanks!
Best regards,
Wendy

Hi Wendy,
Yes the assumption could be one reason as well for the error (403 forbidden), but there could be several other aspects also to get the 403 error, for better understanding the reason for the error, may I request you to create an incident send it to us.
Also please try once running the scenario in C4T and check if the relevant documents are being sent through Outbound Service or not.
Thanks & Regards,
Bharath

Data Federator Connection to R3 - java.lang.NullPointerException

Hi.
We are trying to add a SAP R3 DataSource in Data Federator XI 3.0 SP2.
Test Connection gives us the following message: "The connection was established but there is no table for the given connection parameters", what it seems to be ok according to the SAP doc.
However, when we try to get a list of the Functions or Infosets in the SAP system, an error comes because of a "java.lang.NullPointerException". Checking the application log we get the following:
2010/03/30 12:21:27.059|<=|||0|26537104| |||||||||||||||"[LeSelect.Api.LSStatementImpl] - [Execution Thread 4]Executing query: CALL executeConnectorCommand '/TEST//TEST/user_bla/sources/draft/R3SYS', 'GET_FUNCTION_LIST * * 200'"
2010/03/30 12:21:27.074|>=|E||0|26537104| |||||||||||||||"[LeSelect.Core.n] - [Execution Thread 4]Bad Wrapper Error:
java.lang.NullPointerException
     at LeSelect.Wrappers.SAPR3.H.F(y:343)
     at LeSelect.Wrappers.SAPR3.H.executeCommand(y:285)
     at LeSelect.Core.B.D.R(y:151)
     at LeSelect.Core.QueryEngine.H.p.G(y:131)
     at LeSelect.Core.QueryEngine.H.p.A(y:105)
     at LeSelect.Core.QueryEngine.B.J.A(y:72)
     at LeSelect.Core.QueryEngine.Executor.y.A(y:227)
     at LeSelect.Core.QueryEngine.m.A(y:284)
     at LeSelect.Api.LSStatementImpl.lsExecuteQuery(y:314)
     at LeSelect.B.E.D.V(y:935)
     at LeSelect.B.E.K.B(y:105)
     at LeSelect.B.E.G$_A.run(y:691)"
We registered the callback program and did all of the steps indicated for the installation, also checked the possible sources of the error according to OSS Note 1278491.
Any idea how to solve this? Thanks.

Hello, we have the similar problem: while connecting from Data Federator to SAP ERP we get the following error - "Wrapper /ZTEST/sources/ZTEST reported an exception which is not a WrapperException: java.lang.NullPointerException: null"
It's necessary to install "SAP BusinessObjects Data Federator Infoset, SAP Query and ABAP Functions Connector Prototype"
SAP BusinessObjects Web Intelligence Reporting for SAP ERP
for connection to SAP ERP.
Are there any ideas? Thanks

Goods receipt and post goods issue are not updated back from EWM to ECC

Hi Experts,
Would anybody able to tell me the setting to be modified / defined to backward flow of information from EWM to ERP i.e. the goods receipt, goods issue are not being updated back in ECC once the goods receipt and post goods issue are posted in EWM?
It would be great help if i get the response as early as possible.
Chakrapani Das

Hi Chakrapani,
You might want to try checking the customization on the SCM part following this path:
SPRO - Extended Warehouse Management - Interfaces - ERP Integration - General Settings
Pay special attention on the Check of ERP-EWM Configuration transaction.
After you have checked these you should probably check the outbound queue monitor (tx SMQ1) from EWM to ERP. You can use the SMQ1 - Outbound queue and SMQ2 - Inbound Queue both in ERP and SCM to check the communication betweene these two systems.
Also you may want to checkt the SLG1 - Analyse application Log in SCM in order to see if any internal bugs exist.
All the best,
Claudiu Maxim

E : could not create header data delivery in EWM system

Hi Experts.
Inbound delivery (vl60) from ERP (itu2019s stuck in outbound queue: smq1) to EWM. Application log EWM system below.
ERP/EWM Interface Appl log
E: could not create header data delivery < dly number >, system < BS System > (Msg id: /SCWM/ERPINTEGRATOIN012)
S: supply chain unit < SU NO > found for erp warehouse number < WM NO>
S: EWM Document type INB for ERP delivery type EL found.
W: No date/time type found for ERP date/time IDDOCUMENT.. (Msg id: /SCWM/ERPINTEGRATOIN054)
W: No date/time type found for ERP date/time IDINTRANS.
W:No date/time type found for ERP date/time IDVERSION.
S: Date/time type TDELIVERY found for ERP date/time WSHDRLFDAT
S: Business partner <BP NO > for ERP Partner <P NO> found.
S: NO document found
E: application error
E:an error occurred during validation of object.
POST-Processing Framework Appl log
Processing /SCDLT/TS_TRANSFER is started
messages for doc:IDR < dly no >
Started Transition successfull
preparation for database access successfull
start access to document flow successfull
step determination successfull
step proecssing successfull
start checking whether action 022 successfull
start data transfer successfull
start checking whether action 020 in ERROR
         Action not executable
        config. error method CHECK of validation PDI_HDR_ERP_PARTNER Not implemented
        config. error method EXECUTE of validation PDI_HDR_ERP_PARTNER Not implemented
         error in step processing
        action 020 not allowed
        transition failed
       Action not be successfully executed
could any one guide me to solve the issue.
Kind regards
Edited by: Rahman Abdul on Jun 20, 2011 9:33 PM
Edited by: Rahman Abdul on Jun 20, 2011 9:33 PM
Edited by: Rahman Abdul on Jun 20, 2011 9:34 PM

Hello,
In SPRO, you need to maintain the entries for:
No date/time type found for ERP date/time IDDOCUMENT.. (Msg id: /SCWM/ERPINTEGRATOIN054)
W: No date/time type found for ERP date/time IDINTRANS.
W:No date/time type found for ERP date/time IDVERSION.
This can be found in EWM > EWM > Interfaces > ERP Integration > Delivery Processing > Map Date Types from ERP System to EWM.
Cheers,
Paulo

Connecting R/3 source system as BW source system type

hi,
I have just noticed that on my clients system I work now source system SAP ERP is connected as source system type SAP Business Information Warehouse.
Is it ok to do it like that? Should not it be connected as SAP System from release 3.0E (Automaitc Creation)?
or maybe it does not matter?
Regards,
Andrzej

is it an erp04? as far as i recall the WAS hosts a BW instance as well as the ERP...

Warehouse Management: WM vs EWM

Hi all,
I need information about the features of WM and EWM (included in SCM and ECC 5.0) to compare them: which are the new features, functionality comparison, extensions, etc.
Another question, i read in a SAP doc that EWM is included in ECC 6.0 in mySAP ERP 2005 and SCM 5.0. so... does it means that EWM runs in both systems? with the same functionality?
thanks

Hi Hector,
Welcome to SDN.
SAP's Warehouse Management functionality include running ERP WM in an integrated scenario, ERP WM in a decentralized scenario, or SCM EWM 5.0 in a decentralized scenario
Online Help (http://help.sap.com/)
Select Documentation ==> mySAP Business Suite ==> SAP Supply Chain Management ==> SAP SCM 5.0 (select language) ==> SAP Extended Warehouse Management (SAP EWM)
http://help.sap.com/saphelp_scm50/helpdata/en/5f/c69040bca2ef4ae10000000a1550b0/frameset.htm
SCM Portal (http://service.sap.com/scm)*
Choose Warehousing, and then either ERP EWM or SCM EWM
*Requires login credentials to the SAP Service Marketplace
Regards,
Ferry Lianto

Problem while starting MMC

Dear Gurus,
I have installed SAP 4.7 IDES. After installation a message came that installation is completed sucessfully. Then I restart the computer and started SAP R3 Management Console their the erroe message is coming. disp+work.exe stop.
I am also giveing the error.
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Tue Dec 18 12:07:12 2035
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ERP\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\ERP\SYS\exe\run\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ERP\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6200
M patchlevel 0
M patchno    251
M intno      20020600
M pid        2456
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2456) [dpxxdisp.c   1016]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Tue Dec 18 12:07:13 2035
M calling db_connect ...
C Got ORACLE_HOME=D:\oracle\ora81 from environment
C
C Tue Dec 18 12:07:15 2035
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPERP's password
C Connecting as /@ERP on connection 0 ...
C Attaching to DB Server ERP (con_hdl=0,svchp=06B2B118,svrhp=06B2AF24)
C
C Tue Dec 18 12:07:16 2035
C Starting user session (con_hdl=0,svchp=06B2B118,srvhp=06B2AF24,usrhp=06B71FDC)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c      9536]
C Try to connect with default password
C Connecting as SAPERP/<pwd>@ERP on connection 0 ...
C Starting user session (con_hdl=0,svchp=06B2B118,srvhp=06B2AF24,usrhp=06B71FDC)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c      9536]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#2 @ 962] [dbsh    0962 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 962] [dbsh    0962 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   8277]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = -1
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    rfc_req = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server testa_ERP_00 on host testa (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Tue Dec 18 12:07:16 2035
M * RELEASE     620
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        8408
M * COUNTER     1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2456) [dpnttool.c   345]
Pl. look into this.
Manoj

Hi Manoj,
Have you solved the problem??
I have the same.
My database is running and open.
**C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017**
*[dboci.c      4508]*
**C *** ERROR => CONNECT failed with sql error '1017'**
*[dbsloci.c    11395]*
**B **LOG BY2=> sql error 1017   performing CON [dbsh#3 @ 1204] [dbsh    1204 ]*
**B **LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh    1204 ]*
**B **LOG BY2=> sql error 1017   performing CON [dblink#3 @ 428] [dblink 0428 ]*
**B **LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]*
**M **LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1283]*
*M in_ThErrHandle: 1*
**M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]**
*M*
I update the kernel level recently.
Thanks.

ALE: how do I use dependent distribution for customer and vendor addresses?

Hello SDN'ers
Hopefully someone can help me with an ALE question.
We have two ERP systems connected with ERP - Retail and AFS.
Customers and Vendors may be created in Retail, and are distributed to AFS using DEBMAS, CREMAS and ADRMAS messages.
Not all customers and vendors are required in AFS, so we have various filters set up in the Retail distribution model (BD64).
However with the filters in place, addresses were still being distributed for customers and vendors that had been filtered out.
To try and avoid this for vendors, we created a filter group for AddressOrg.SaveReplica in receiver determination. In the filter group we selected Dependent Distribution for CREMAS (Address owner object).
This works perfectly for vendors - vendor addresses are now only distributed if the vendor itself is distributed.
However I've now discovered it is preventing any customer addresses from being sent! I was surprised about this: I expected CREMAS dependency to only affect vendor addresses. Can someone tell me:
- is this how dependent distribution is designed to work? In which case can anyone offer any suffestions to achieve the filtering some other way?
- or are we doing something wrong to be getting this result?
Thanks for any help!
regards, Roger

Hi all,
as Robert suggested, I've written an exit to get round this, although I'm surprised I should need to!
What I did was to code an enhancement in function group BDBF, at the start of subroutine COMPUTE_LOGIC_EXPRESSION.
* In the case of addresses, dependencies should only be applied for the appropriate type of address
data: lwa_tbd14 type tbd14.
if P_MODEL_DATA-FTYPE = C_FTYPE_DEPENDENCY_FROM_MESTYP.
*   Dependency from Message Type.
*   Read the Address Object type
    READ TABLE P_FILTER_VALUES
                     WITH KEY OBJTYPE = 'AD_OBJTYPE'
                     BINARY SEARCH.
    if sy-subrc = 0.
*     Check if the Message Type is linked to the Address Owner Object Type
*     (Table is buffered on DB)
      select single *
        from TBD14
        into lwa_tbd14
       where MESTYP = P_MODEL_DATA-FMESTYP
         and OBJTYP = P_FILTER_VALUES-OBJVALUE.
      if sy-subrc <> 0.
*       Wrong type of address for this dependency - stop here
        P_REPLICATE = c_true.
        exit.
      else.
*       Correct address type. Standard processing continues, checking any
*       filter values set up against the Address Owner Object Type.
      endif.
    else.
*     It isn't an address - continue with standard processing
    endif.
endif.
Let me know if this helps you, or if you know of a better way to achieve the same result.
Roger

ORA-27101: shared memory realm does not exist after kernel upgrade

Hi,
I have installed ECC 6.0 on windows 32 bit. After I upgraded the kernel, the database can't be started as well as SAP. When I checked the logs, the error ORA-27101: shared memory realm does not exist was encountered.
M calling db_connect ...
C Prepending E:\usr\sap\ERP\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06E217E8   06E26D84   06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c      4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c    11042]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06E217E8   06E26D84   06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c      4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c    11042]
B ***LOG BV3=> severe db error 1034      ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
B ***LOG BY2=> sql error 1034   performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10283]
M
Please help.
Thanks.
Regards.

Hi. First restart the server, then start the LISTENER, and repeat startsap again. Check if messages repeated. Regards.

ERP - EWM connection

Similar Messages

Maybe you are looking for