ERP install on laptop available?

hi Forum,
for live customer demo on laptop, we are looking for sap ERP version for laptop.
If anyone has idea on this, then please put some information.
thanks in advance,
Sathyanag

Hi Sathyanag,
you can have a look at <a href="http://www.computacenter.de/technologien/sap/sap_ides_engl.shtm">IDES Laptop</a> or try to install IDES on your own. I did it on a P4 with 1 GByte RAM and 160 GByte Harddisk on Debian Linux.
Regards
Gregor

Similar Messages

  • I purchased elements 11 - I have installed on work computer but it will not allow me to install on laptop stating the code has already been used.  Can anyone help me install on laptop please?

    I purchased elements 11 - I have installed on work computer but it will not allow me to install on laptop stating the code has already been used.  Can anyone help me install on laptop please?

    No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.

  • How do I revert to abackup from time machine? The backups prior to Lyon install are not available  - restore button is not active. I wish to return to Snow Leopard.

    How Do I revert to Snow Leopard from Lyon?
    The backups prior to Lyon install are not available... the restore button is not active.
    thanks!

    You need to do a full system restore from your last Snow Leopard backup.
    See #14 in  Time Machine - Frequently Asked Questions.

  • Legitimate newly purchased Premiere Elements-10 32-bit install files not available

    Friends:
    I purchased an $1100 Nikon camera and the deal included OEM PS Premiere Elements 10.
    Legit purchase with a CD and legit Serial #.
    Can't install because what is Adobe's fault, not the camera vendor's and certainly not mine.
    Adobe's own published notice:
    "The 64-bit version of Adobe Premiere Elements 10 only installs on Windows 7 64 bit. If you have Windows XP 64 bit or Vista 64 bit, it's necessary to install the 32-bit version. Because the Adobe Download Assistant automatically downloads the 64-bit version in error, it's necessary to download the 32-bit version manually through alternate means."
    The problem is that the same holds true for installing on XP Pro SP3 and Adobe makes no mention of it in the above admission.
    Then, Adobe's own Solutions 1, 2 & 3 for manual download all fail, even after fussing for days over it.
    Even Solution 3, the last ditch option, fails perhaps because Elements 11 is out and Adobe has killed the 10 download Ftp sites.
    Files I am unable to download from Adobe (without entrapment by so called Free Dowload sites) are:
    http://trials2.adobe.com/AdobeProducts/PRE/10/win32/PremiereElements_10_LS15_win32.exe
    http://trials2.adobe.com/AdobeProducts/PRE/10/win32/PremiereElements_10_LS15_win32.7z
    How can I solve my dilemma, being denied my right to learn Elements from a legally purchased 10 and being
    forced to purchase 11 instead on top it. Fair?
    I am requesting Adobe politely to make it possible to download the Adobe recommended two files withou hassles.
    I must mention in this context my own  (and thousands of others') sad experience with Flash updates. Just follow
    my own (and others') posts in Adobe forums. Plus, just read the Internet posts along these lines:
    "It's impossible to download anything from Adobe. I have given up and I have given up on Adobe products."
    Not that I want to, but I am forced into echoing the same sentiment.
    Can anyone help, please ?
    Thanks,
    Pradip A.

    Hello Mr. Wright:
    The download now works. Appreciate your help.
    The ...7z file is 1.37 Gb long. I have super high speed Fibre Optic Internet connection with Bell. I rarely have the ocassion to download files of this size. After downloading more than 1 Gb, the transfer hung - either at the Client end, or at the Server end. Bell is sending tech Thursday to mitigate some line noise they detected. Hopefully, the stars will fall into the right place before long.
    Regards,
    Pradip Acharya
    Date: Tue, 13 Nov 2012 11:54:11 -0700
    From: [email protected]
    To: [email protected]
    Subject: Legitimate newly purchased Premiere Elements-10 32-bit install files not available
    Re: Legitimate newly purchased Premiere Elements-10 32-bit install files not available created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    You can find the 32-bit installer at http://prodesigntools.com/photoshop-elements-10-direct-download-links- pse-premiere-pre.html.  Please make sure to complete the Very Important Instructions section prior to clicking on the link to download the file.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4844309#4844309
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4844309#4844309
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4844309#4844309. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I have been using CS6 for two years without incident.  Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help

    I have been using CS6 for two years without incident.  Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?

    Hi Mylenium,
    Thanks for your response.
    Here is the error information showing up:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe Media Encoder.exe
      Application Version: 6.0.0.382
      Application Timestamp: 4f62fcf1
      Fault Module Name: WatchFolder.dll
      Fault Module Version: 6.0.0.382
      Fault Module Timestamp: 4f62f37f
      Exception Code: c0000005
      Exception Offset: 0000000000007899
      OS Version: 6.1.7601.2.1.0.768.3
      Locale ID: 4105
      Additional Information 1: 9a62
      Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
      Additional Information 3: 1fb3
      Additional Information 4: 1fb304eee594288faeefbf1271b70d37
    I am using a PC Windows 7

  • Photoshop Elements 12 installed in laptops?

    I recently read a coment in Amazon in which the person said that Elements 12 have problems when installed in laptop.  The program keep shooting down.  Another person with the same problem said that the cause was a program "autoanalyzer" I think.  It is true? What information do you have about this.  How this can be solved or prevented?  I have a Sony Vaio with windows 8.  I do not have the program but I am thinking in buying it.

    Thanks.  I will do that and see what happen.
    Best
    JRRR
    De: Barbara B. [email protected]
    Enviado el: lunes, 02 de diciembre de 2013 10:08 p. m.
    Para: panamito
    Asunto: Photoshop Elements 12 installed in laptops?
    Re: Photoshop Elements 12 installed in laptops?
    created by Barbara B. <http://forums.adobe.com/people/Barbara+B.>  in Photoshop Elements - View the full discussion <http://forums.adobe.com/message/5894096#5894096

  • Installed cc photoshop and lightroom on desktop and lightroom on laptop, can't get photoshop to install on laptop

    installed cc photoshop and lightroom on desktop and lightroom on laptop, can't get photoshop to install on laptop, mac

    What Mac? What version of OSX? What errors? You need to be more specific.
    Mylenium

  • HT4623 I am updating my school's operating system for my iPads.  I have been able to complete 2 carts of 30 (60 total). The next cart I was able to download the IOS6.3.1 update but it states the install is not available. Good internet connection.

    I am updating my school's operating system for my iPads.  I have been able to complete 2 carts of 30 (60 total). The next cart I was able to download the IOS6.3.1 update but it states the install is not available. Good internet connection.  Please advise.....
    Thanks!

    Hi nytesinger,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    Apple Configurator Help: About Apple Configurator
    http://help.apple.com/configurator/mac/1.3/#cadf1802aed
    Apple Configurator Help: Prepare devices
    http://help.apple.com/configurator/mac/1.3/#cad96c7acd6
    Cheers,
    - Judy

  • Final Cut Studio 5.0.4 Upgrade to Final Cut Studio 2 HD Crash now needing to install on laptop

    I had Final Cut Studio 5.0.4 on my laptop which I upgraded to Final Cut Studio 2 during the 12 month period when it was offered at a reduced price.  My old G5 Hard Drive has bit the dust and I am trying to install on my laptop.  I have successfully re-installed upto 5.0.4 including the troublesome compressor 2.0.1 and Qmaster 2.0.1.  There are no further updates apparently when my laptop scans for any.  I am running OSX 10.5.8.  Now when I put the disks in for the Studio 2 all FCP, Motion, Soundtrack Pro, Compressor, DVD Studio Pro, Apple Qmaster, Live Type and Cinema tools are all grayed out, saying they need to be upgraded first.  I am guessing it is because this 12 month deal is no longer available.  Does anyone know a work around for this?  I paid $499 for this upgrade and I cant re-install it?
    My laptop is 2.4 GHz Intel Core Duo, 2 GB 667 MHz DDR2 SD RAM, small for FCP but I don't keep files on there.
    Any help would be appreciated.
    jennymanning

    why did you install FCP 5 when you are going to install FCS 2?   FCS 2 upgrade installer does not need  FCP 5 installed and therefore you dont need updates as you will be installing a newer version of FCP.
    During the installation process of FCS 2 it should ask for the serial number of FCP 5 then ask for the upgrade serial number for FCS 2. You must have both of these or it wont install.
    Check this spec for FCS 2 with your laptop to see if it is compatible, if the machine is not compatible, it wont install.
    Final Cut Studio 2 Spec

  • [SOLVED] No internet after fresh install on laptop

    After working mostly on windows and a little on some linux distributions like Mint and Ubuntu I wanted to move on to Arch Linux after a lot of discussions about it with colleagues and my gf. I managed to install it succesfully on my desktop and everything runs smooth. My laptop didn't went as smooth though. First I had some problems to get it booting, but that problem got solved.
    Now... At home I don't seem to be able to connect to the internet with my laptop, while my desktop can connect fine. Both machines are connected with a wire on the same D-LINK router, can give the specs if needed. For both i just use the dynamic IP adress option via dhcpcd.
    It might be something simple, and I'm quite the noob, although i want to learn, so I hope someone has a clue what might be going on and how to solve it. I'm writing this topic from my desktop, as I said before, that machine has internet connection without any problem...
    Last edited by glendc (2014-02-26 00:51:28)

    glendc wrote:Ok I am available to solve the solution again for a couple of hours. So I still have no internet, and i'm home right now. Earlier today, at work, I installed networkmanager and net-tools. So I have these now too. So any suggestions on where the problem can be? I might not be describing my problem not enough, or forgetting to mention important details, I'm sorry for this, but I'm very new to this, so I don't really know what to tell and what not.
    Well....I can tell you what I had to do.
    dhcpcd works fine as long as you have an ethernet wire hooked up. My Dell has the Broadcom Wireless card, meaning I had to get the driver from the AUR. Here's how I got it done:
    Install Arch
    (leave the ethernet hooked up)
    if you have no internet and the ethernet is hooked up, issue the following command:
    sudo dhcpcd
    if you don't have your /etc/sudoers file set up just type
    su
    then enter your password,
    then enter the following command:
    dhcpcd
    ok, assuming you have internet withe the ethernet wire, install a browser. Go to the AUR, and get the "b43-firmware" download the tarbell, uncompress it, then install it using makepkg. Check the Wiki if you're not sure how to do it. Once it's installed, issue the following command:
    sudo modprobe b43
    again, if you don't have sudoers set up, you'll have to execute su, then password.
    ok...now you have wireless.
    now you have two choices to get it working,
    execute the following command to test it:
    wifi-menu
    you can sign on from there
    to sign on at boot, you'll need network manager. I see you've already installed network manager, so you just need to install the panel applet unless you're running gnome or kde (these come with it out of the box)
    issue the following three commands:
    sudo systemctl disable dhcpcd.service
    sudo systemctl stop dhcpcd.service
    sudo systemctl enable NetworkManager.service
    these commands are case-specific, so make sure you capitalize the N, and M.
    reboot, then you should have wifi show up from the panel applet.
    if not, let me know....We'll dig a little deeper.
    at any rate, whether you have a Broadcom card or not, you have to stop the dhcpcd service and start the NetworkManager service to give control to the panel applet.

  • T61 / Finding Networked Printer to install on laptop.

    I'm trying to install a network printer on my laptop that is ethernet wired to my router.  I'm trying to install the networked printer on my laptop, but cannot get the software to see the printer on the network.  It can't seem to find it.  I spoke with HP and they didn't want to change settings on laptop, suggested IBM support.  Lenovo offers no support as it's over 1 year.  Any thoughts - ?   They think that it could be a firewall that's blocking the laptop from seeing it.  We disabled windows firewall and norton, to no avail ? HELP ......ideas are welcome.

    What operating system do yoyu have installed on your T61?
    Its not clear from your message what is "wired" to your router.  Are you connecting your laptop to your router via wired Ethernet connection, or are you connecting via a WiFi connection?
    Cheers,
    Bill
    I don't work for Lenovo

  • Application Install On Laptop Off Network

    I deploy an application to a number of users most of which have laptops they take home every night. They are configured in an appropriate boundary group. If the client downloads the policy prior to the end of the day and the user takes the device
    home at night will the install still occur? I believe the client can act independent of the management point. What if I set it to run from a distribution point?

    The client always acts independent from the MP. It connects to the MP every 60 minutes (by default) to retrieve its policy, nothing more. Enforcing that policy, including deployments, is completely independent from any communication with the MP.
    Of course, enforcing a deployment typically also involves content so if the client does not have access to a DP with the content or has not cached the content locally (which it will do only for required deployments at their available time), then it won't
    be able to successfully enforce the deployment. If the package is set to access the content directly from the DP, same, thing, it won't be able to enforce it which is why using that setting is generally not recommended (in addition to wasting disk space).
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Q. regarding yum install - no package available

    Configuring OL 5.6 under VMworkstation on my laptop.
    Created vm and am going through pre-reqs for installing Oracle rdbms 11.2. As standard practice I configured to go to oracle's public yum server and installed 'oracle-validated'. Then I double-checked the required packages listed in the Installation Guide. Two of them still weren't installed, so I tried to go for them individually with 'yum install <pkg name>. The first, numactl-devel, installed fine. However ...
    [root@lnxsrv01 tmp]# yum install compat-libstdc++
    Loaded plugins: rhnplugin, security
    This system is not registered with ULN.
    ULN support will be disabled.
    Setting up Install Process
    No package compat-libstdc++ available.
    Nothing to doyet when I go to http://public-yum.oracle.com/repo/OracleLinux/OL5/6/base/i386/, I see 'compat-libstdc++-33-3.2.3-61.i386.rpm' listed just fine.
    my config - /etc/yum.repos.d/public-yum-el5-6.repo has enabled:
    [ol5_u6_base]
    name=Oracle Linux $releasever - U6 - $basearch - base
    baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL5/6/base/$basearch/
    gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
    gpgcheck=1
    enabled=1So what am I missing that it insists this package is not available?

    Gokhan Atil wrote:
    Hi Ed,
    You should use yum list (not repolist - my bad). Here it is:
    [root@oelgrid ~]# yum list | grep compat-libstdc
    This system is not registered with ULN.
    ULN support will be disabled.
    compat-libstdc++-296.i386                2.96-138                    installed 
    compat-libstdc++-33.i386                 3.2.3-61                    installed 
    [root@oelgrid ~]# yum install compat-libstdc++-33.i386
    Loaded plugins: rhnplugin, security
    This system is not registered with ULN.
    ULN support will be disabled.
    Setting up Install Process
    Package compat-libstdc++-33-3.2.3-61.i386 already installed and latest version
    Nothing to doRegards
    Gokhan AtilInteresting. I got exactly the same results. So in the end, it looks like perhaps the required package is installed ... though the installation guide specified
    compat-libstdc++-33-3.2.3
    compat-libstdc++-33-3.2.3 (32 bit)
    So ....
    [root@lnxsrv01 tmp]# rpm -q compat-libstdc++
    package compat-libstdc++ is not installed
    [root@lnxsrv01 tmp]# rpm -q compat-libstdc
    package compat-libstdc is not installed
    [root@lnxsrv01 ~]# yum list | grep compat-libstdc
    This system is not registered with ULN.
    ULN support will be disabled.
    compat-libstdc++-296.i386                2.96-138                    installed
    compat-libstdc++-33.i386                 3.2.3-61                    installed
    [root@lnxsrv01 ~]# yum install compat-libstdc
    Loaded plugins: rhnplugin, security
    This system is not registered with ULN.
    ULN support will be disabled.
    Setting up Install Process
    No package compat-libstdc available.
    Nothing to do
    [root@lnxsrv01 tmp]# yum install compat-libstdc++-33.i386
    Loaded plugins: rhnplugin, security
    This system is not registered with ULN.
    ULN support will be disabled.
    Setting up Install Process
    Package compat-libstdc++-33-3.2.3-61.i386 already installed and latest version
    Nothing to do

  • Win 8.1 won't install to MX100 256GB when installed in Laptop

    Three months ago I bought a MX100 256GB drive. It installed and performed flawlessly in my PC.  A month ago I bought a Lenovo Flex 2 15 laptop. I decided to remove the MX100 from the PC and install it in the Lenovo. I downloaded Windows 8.1 from Microsoft and installed it on to a USB drive.  The install went normal until it actually came to installing Windows on the drive. It wouldn't install. I got the message: "We couldn't install Windows in the location you chose...(edit)...error code 0x80300002". I clicked refresh and the MX100 disappeared from the box. The only way to make it return was to restart the windows installation which ended with the same result.My son then decided to clone his Adata 128GB SSD to the MX100. The MX100 booted and performed perfectly on his PC. We then installed a Samsung EVO 500GB SSD into the Lenovo laptop. Windows 8.1 installed from the USB and ran perfectly (It's in the laptop now, which I am now using). He then cloned the Samsung EVO to the MX100 and installed it into the laptop. The Laptop booted to a blue screen saying there were errors.The firmware for the Lenovo and the MX100 are both up to date. We managed to install Windows 7 64 bit to the MX100 by setting the Bios from UEFI to Legacy. Trying to install Windows 8.1 using legacy instead of UEFI failed.Last night we used Diskpart to delete all the volumes on the MX100 but did not format it. Windows 8.1 failed to install again with the same 0x80300002 error.We are stymied. Any help would be appreciated.

    Here's what I would do..... Make sure your BIOS is back to UEFI default settings.  You should be able to load the default BIOS settings, and then save and exit. Make sure you don't have any other HDD/SSD plugged in except for your MX100. Boot your Microsoft Windows 8.1 media USB drive. Run diskpart clean:list diskselect disk ?diskpart>cleanexitexit Navigate back to the Microsoft media USB tools....where it says shutdown/powerdown computer. Power down your computer. Unplug your computer for 30 seconds. Boot your Microsoft Windows 8.1 media USB drive Run diskpart clean (again)diskpart>list diskdiskpart>select disk ?diskpart>cleanexitexit Navigate to power down your computer Boot your Microsoft Windows 8.1 media USB drive Install Windows 8.1 on the entire unallocated space (do not partition and do not format).  The USB Windows installer will do everything for you.     

  • VM Server Install - use all available disks?

    Hi,
    We have a DELL XPS with 2 x 1.5tb disks and an i7 processor and we are going to use this machine as a mini VM Server. When we do the install of Oracle VM Server 2.2.1 we aren't sure how to setup the disk partitions so that Oracle VM can see all the availabel sapce (the whole disk) on both of the disks?
    It seems to default to create an OCFS2 file system (to mount as /OVS) using 1.4tb of the first hard disk and then leaves the second as "Free Space".
    I am not very familiar with OCFS2 - but - I have a rough idea of what I want to do (conectpually at least). I want the space to appear as though it was a logical volume and be available to VM Manager and miounted as /OVS
    Does this make sense - and can anyone offer any pointers on how we utilise both hard drives in a single machine.
    Thanks in advance.
    Regards,
    Bren

    The simplest solution is, as you suggested, creating an LVM volume group, and create one large lv.

Maybe you are looking for